Related
He all,
I got some connection problems.
If i insert my WiFi card(sandisk 256+WiFi) my I-mate detects it and the antanna is displayed in de buttom of my screen but whenni go to my browser(internet) the message :Cannot connect with current conection settings. To change your connection setting, tap settings.
But i have no id how to change the settings to make it work with my wireless network.
Also the WiFi card couses to freeze the system every once and while.If i take the card out everything is okey again.
I got the I-mate jam with latest rom and radio drivers and I already installed the drivers of the WiFi card.
I hope you guys can help me out with this one
Thanks in advance
GreetZ
Nick
Nobody that can help a poor guy out ?
GreetZ
Nick
I had a similar problem with my XDAII, believe it is likely to be a known problem and related to the dual function of the card.
Have you tried the website for updated drivers?
The other options are to ensure that it you have the correct settings for Work or Internet to connect to.
I assume you are connecting to a wireless Access Point on a home based WIFI system, or are you trying to connect to public hot spots?
Contacted clubimate?
It started after I installed the latest rom version you guys think I migh work if I installed the older version?>
GreetZ
Nick
which rom are you referring to, an original manufacturer version or a cooked rom from this site?
if it is a licensed version, I would contact imate, have you installed the latest drivers from the hardware supplier?
I think you may have to go to your wireless settings and ensure connect to the internet is selected. also,scan local networks and ensure you are connecting to the correct network.
my problem when I got that message was cause it was connecting to the guy next door with wep key required.
are you able to connect to your host pc via wifi using a mapped network drive? or are you simply using a wifi hotspot?
if using a wifi hotspot, you should select auto connect to non-preferred networks.
start - settings - connections and choose wireless or wifi or network and have a look at what is actually happening in the network configurations. if you are really struggling still, try posting some screen shots of your network connection settings
sorry misread post
Just to end this topic.
I returned it to sadisk and they said it was the memmory function.
I couldn't get a new one form the store i bought it so I got my money back,
I now have a new one without the extra memory.
GreetZ
Nick
I want to setup my P3600 (English ROM) as a 3.5G modem for my PC but not successful yet. The Telco service staff has no idea too and pass me a manual for dopod 838 pro. The mentioned programs are not there, nor in my dopod D810 CD.
I can:
- Activesync using USB
- Activesync using bluetooth
Question:
- Should I use the same HTC modem dialer on my PC for XDA?
- Should I use the Start->Program->Internet Sharing?. It allows me to choose bluetooth or USB to PC but both not working too after connect.
Anyone successfully connect their PC via P3600 using HSDPA, pls share the steps. Many thanks.
Eventually, I figure it out myself.
Forget all the HTC modem dialer or wireless modem program as in Xda.
1. Start->Program->Internet Sharing on WM5.0
2. Select the connection type: USB or BT
3. Select "Connect"
4. Then connect the USB and done.
For BT, it would have instruction for you to start PAN now. done.
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Thanks very much for reporting this info back, it will come in useful when I get my trinity!
mobiler2 said:
Eventually, I figure it out myself.
...
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Click to expand...
Click to collapse
just 2ยข...
Sadly, because Internet Sharing is actually a NAT server running on your phone, it could prevent you from using 'classic' VPN. You can find more details by googling for 'VPN over NAT'.
for VPN purposes you can always use old good wireless modem mode. it works well.
I don't think it is related to NAT. As long as the VPN ports are opened, it should work. I am using a Wireless router at home and no trouble at all for using VPN under NAT.
Checked with telco. They can enable it for me with extra charge/month. and also the traffic would be charged as expensive GPRS plan. What kind of service!!!
Think twice before subscribing. I used "WonToFee / 1-1-" . The sales that say it can work for VPN may not even know what a TCP port is.
Anyone has use VPN over HSDPA with another telco? e.g. SMOOTH TONE
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
shefful said:
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
Click to expand...
Click to collapse
Hi shefful,
I have had the same problem. I have come across a possible solution while browsing forums. When you need to disconnect press and hold down the red end call button for a few seconds and this disconnects the modem. I haven't tried this yet but it's worth a shot.
regards
Adam
shefful said:
Hello,
This thread is a bit old, however I think it is related to my problem: I am trying to use Internet Sharing on my P3600 (ROM 1.23.405.2 / Radio ROM 1.38.00.11). Using BT, it works just fine. However, when connected on USB it works fine only for the first time. When I tap "disconnect", the HSDPA connection is stopped, but the status keeps displaying "Connected". There is now way to use Internet Sharing again before a soft reset (Windows XP wouldn't even recognize the P3600 again). Is this a known issue? I have googled a bit, but I haven't found any similar problems.
Thanks!
Click to expand...
Click to collapse
Hi shefful,
I have had the same problem. I have come across a possible solution while browsing forums. When you need to disconnect press and hold down the red end call button for a few seconds and this disconnects the modem. I haven't tried this yet but it's worth a shot.
regards
Adam
Hi adamwolfe,
Thanks for your help, unfortunatelly this is not the solution to my problem. The GPRS connection ends (according to the icon on top of the screen), but the status keeps displaying "Connected". The application stops responding and can't be stopped from Settings/Memory/Runnning Programs.
Hi shefful,
Yeah, I have the same problem too. Looks like the program freezes in the Connected status. Even tried terminating Internet Sharing with Start/Settings/.../Memory/Running Programs and relaunching Internet Sharing.
Sometimes I get a popup message saying the remote host has terminated the connection before the program hangs. I think this may be the cause of the problem. Which mobile operator are you on?
Rebooting is the only solution so far. Fortunately the Trinity reboots in 20 seconds - one of the fastest in the PPC market I think.
Hi ayhansan,
For other reasons I needed to hard reset my Trinity and the freezing problem has disappeared. I don't know what had caused this problem, I just hope it won't happen again. If I disconnect the USB cable, the status changes to "disconnected" and I can always reconnect.
same problem here
i am connecting to laptop thru USB
after I disconnect UMTS phone syaing still connected
and want kill Internet Sharing
???
thanks
regards
mobiler2 said:
Eventually, I figure it out myself.
Forget all the HTC modem dialer or wireless modem program as in Xda.
1. Start->Program->Internet Sharing on WM5.0
2. Select the connection type: USB or BT
3. Select "Connect"
4. Then connect the USB and done.
For BT, it would have instruction for you to start PAN now. done.
Woo, it's much easier than the HTC dialer. But now my problem is VPN problem with my telco.
Click to expand...
Click to collapse
does this work with Mac as well?
Like already write, I'm looking to helps ref a singular problem in my ppc branded SB but with sw THC in english - I was buy it in thailand one month ago and until 20 of december everythink was ok, but...
I found that the ROM contain the: HTC TyTN 1.18.255.106 ExtROM WWE
The NETWORK MANAGER show me that the tytn is CONNECT to WIFI access point but in the CONNECTIONS always appear no any presence of WIRELESS SERVICE that I can select to use for browse my server , internet and/or skype call
If I use the usb connection there is connection, same by umts and gprs services
Really I don't unterstand what's happen!
I was already many time doing the hard reset but nothing is change!
What you think about?
May be that there are corrupted files that avoid to install few commands?
Regards Freddie
There are the other part of sw that are install in the device by the manufacturer or seller that are not include inside the rom place?
Thanks in advance for your helpings
Black Eagle
go to setting >connections>network cards>
then
you will see a bunch of access points
when you see the one that says available
hold the styles down on it
tap connect
and you should be ok
also check the drop down menu on the bottom of the page
make sure its on both access points and whatever else it says
and also disable the cingular proxy
start>settings>connections>connections>setup proxy server>uncheck the uses proxy server to connect to the internet box
Sorry may be that I was wrong explaine you:
1. in the setting>connections>network cards = no problem my tytn find the access point and after my prompt connect without problem.
2. the problem is in the setting>connections>connections>advanced>select networks>my ISP>edit ... = where there are no tracks of the wireless network available to be select, in way to use the wifi connection that in setting>connections>network cards is ON
I wait your reply thanks
Black Eagle
black eagle,
I think I've undertand your question...
If you have found the WiFi access point and have gotten conected, there is no need to set a conection for that access point;At least, for me that it's not necesary.
When I go to a public place with wifi, or in my home LAN, just let the connections settings to "My ISP" without any changes (no new modem, nothing at all) and thats all, you can surf the net.
regards;
mablan
my problem solved
hi mablan,
thanx very much, fortunately i searched the forum for wifi and got ur post.
i too had the problem of getting good wifi connectivity over my adsl router witg my prophet( O2 neo) but not able to surf net in PIE. when i selected network as "My ISP" it all gone and now i am able to surf my adsl on neo, without any prblem.
thanx once again.
now only problem arises of autometically shifting/choosing of network for wifi and gprs. i remember it is stated somwhere in forum, i will make a try.
Hello mablan,
thanks for your interesting in my singular problem.
I understand what you mean but is not my case, even if my ppc in the setting>wireless lan>advanced>status result connected to the network, I cannot surf internet.
If I go to setting>networks cards i find my home hotspot that result waiting to connecting but ... always not connected
= in the wireless lan I am connected but in the network cards my connection don't exist - also in the connections>connections there is not the choice to select wireless network, don't exist
Hi BlackEagle, now I undestand your problem.
I'm sorry, I don't know what could be the cause of your problem.
Just a dumb question: Have you try to change the settings of your wireless network? I mean, in settings>connections>networkcards tap the name of the wn you want to use and change the settings of the Network key and 802.1x tabs...
If I found arround someplace something that can help you will let you know
regards and hope you find the answer..I'm sure someone here at the forum will help you
mablan
The Wifi Problem Is Now Solved
Hi friends,
I have find the cause of my problem all was in the .NET CF too old
after install of .NET CF 2.0 my problem was end
crazy that my problem was just an old driver
In any case thanks to all that just reply my questions
BLACK EAGLE
Hello I have the same problem, my wireless connection is there, I try to connect and it goes unavailable!!!!
I changed my tytn system from japanese to english but it was working just fine before. after for the first 2 days...
Now even when I reset it to Japanese S.O. does not connect to wifi only GPRS3G!!
Maybe too many hard reset???
What is .NET CF??
Maybe I should try that?
I have a lot of network cards in the list
IEEE 802.11b/g Compatible Wi-Fi Ad...
NE2000 Compatible Ethernet Driver
Virtual Ethernet Intermediate
Remote-NDSI Host
PPTP NDISWAN Miniport
L2TP NDISWAN Miniport
Microsoft null Ethernet Miniport Driver
????????????????????????????????????
Which one shuold I choose????
????????????????????????
Hi,
.NET CF2 is the microsoft.NET software that can you download from msoft website:
http://www.microsoft.com/downloads/...cb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en
download it 22,6 mb and with your device connect by usb install it, when you start the installation, it find your device connect and install just the appropriate drivers, not all the sw
Black Eagle
Thanks Black Eagle I`ll try that!
BLACK EAGLE said:
Hi,
.NET CF2 is the microsoft.NET software that can you download from msoft website:
http://www.microsoft.com/downloads/...cb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en
download it 22,6 mb and with your device connect by usb install it, when you start the installation, it find your device connect and install just the appropriate drivers, not all the sw
Black Eagle
Click to expand...
Click to collapse
Black Eagle
This installable is for computer, its not for a mobile device. The microsoft webpage does not say this is for Windows Mobile OS.
KTyTnUser, check the date of the last post so as not to make a fool of yourself. It was almost 2 years ago....
ultramag69 said:
KTyTnUser, check the date of the last post so as not to make a fool of yourself. It was almost 2 years ago....
Click to expand...
Click to collapse
so?
i am having the same problem with windows M 6 so looking for solutions. how does it matter if someone else faced the same problem 2 years ago?
Its relevant because MS may not be offering the same software to download. I've noticed that some of the older solutions aren't any good for certain things anymore as the apps no longer work for the OS I'm using or that the app, though easily found a while ago, is no longer supported by certain sites.
2 years is forever in the computer world....
Hi everybody,
I have the following problem: when my htc x7500 is connected to my office pc via ActiveSync no internet connection is available on device. As a result the following operation are not allowed: update weather info, update gps satellite data and so on. On my office pc everything seems normal, synchronization works fine and I can see the device's local area connection icon on the iconbar which seems to be able to exchange data regularly.
My OS is winxp and on the device I had installed WM6 and now I have WM6.1 and both windows mobile os had this problem.
Please can someone help me finding a solution?
Thanks in advance,
Willy
check
enable advanced network functionality
in usb to pc
in settings->connections
Me too
This does not work for me on my Touch HD, worked fine on my previous TyTnII with WM6.1.
My activesync version hasn't changed, only my phone.
Tried enabling the 'Enable faster data synchronization' but it still doesnt work.
Has anyone resolved this ?
Have you tried uninstalling and reinstalling ASync?
I've had this problem in the distant past but can't recall off-hand how it was solved, though I would have tried to reinstall.
you can also try to go to settings->connections-connections->advanced->select network
and choose my work network in the dropdown
thanks all for your hints. The activesync re-installation did not work. Now I'll have to wait until monday before trying settings->connections-connections->advanced->select network.
I'll let you know.
I needed to do this regfix to my windows os (compatible both with activesync and wm device center)
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Click to expand...
Click to collapse
I've tried all suggested workaround without success
I think there is someting wrong with my office pc configuration because in the past I was able to access internet from the device and I can't remeber what changed after that...
I have at present exactly the same problem. Did you or anybody else find a solution?
Thanks for any support, Siegfried
On settings- usb conection try to disable advanced network functionality
Hope it helps,
cursor said:
I needed to do this regfix to my windows os (compatible both with activesync and wm device center)
Click to expand...
Click to collapse
I have this issue at the moment, and I am confident it is to do with how this one PC is set-up as I get connectivity through other PC's on the same network. Have no idea how to repair or troubleshoot...but could not find this fix in the registry...
Any help greatly required....
having this issue too on my touch HD , i cant connect to orange wireless internet (mobile internet)
Try the registry edit suggested above. I am running XP and it works for me.
Hey guys,
I have searched for this problem on the forum but I can't find a solution. The problem I have is that my Bluetooth is not working like I would like it to:
When trying to connect from my TD2 to my pc (xp) / laptop (vista) I get the message:
Cannot connect
Your device hasn't been able to connect with 'pc-name'. De connection failed or the password is incorrect.
(I get it in dutch... so if my translation isn't the same as in the english version you know about it).
When using the pc / laptop to connect to the TD2 I get a screen where I can choose between two bluetooth services:
- Dial-up Connection
- Network Access Point
... These are the only two. When I use my old phone I can also use a Serial port connection (and even a few more).
The purpose of the bluetooth connection is to be able to synchronize my contacts with my Microsoft Outlook 2007.
Can someone please help me with this problem? I have already tried a few things, like soft- and hard reset. Updated the ROM, etc. But it is still not working. The only thing which DOES work is connecting the TD2 to my radio in my car...
Thanks in advance
Hi robje,
Ive got same problem with you.. but i managed to solve it ..try enable receive all incoming beams.. u can find it at all settings --> connections --> beam --> then check " receive all incoming beams"... good luck.....
Thanks for the quick help!
I already enabled this setting, but I still have these problems...
I've got exactly the same problem with my bluetooth,are you still using the stock ROM? I've currently got energyrom's standard2.5 installed so I thought that it maybe WinMob 6.5... My wife's phone is fine and she's using the stock ROM. I'm going to go back to HTC's stock ROM, so I'll give you another update after I've done this...
One note to add.. I've seen that on my older Diamond, the bluetooth COM ports menu shows "New outgoing port", whereas my new Diamond2 shows nothing on the same menu...
Update... I've flashed my Diamond2 back to the original HTC ROM and bluetooth is now working correctly. So it looks as though the problem is probably with WinMob 6.5...
Can anyone confirm this at all???
I think I am just using the Stock ROM (as I haven't installed any other). I am also using WM 6.1... as 6.5 is not yet available for the TD2 (if I am correct)...
Robje113 said:
I think I am just using the Stock ROM (as I haven't installed any other). I am also using WM 6.1... as 6.5 is not yet available for the TD2 (if I am correct)...
Click to expand...
Click to collapse
The retail version isn't but a lot of the ROMs on here have been done with beta versions of 6.5 (mines on build 23016)...
Anyway,I've flashed back to my cooked ROM and bluetooth still isn't working correctly. I've been messing around with the "advanced configuration tool" and found that OBEX was disabled. However once I turned this on, it still wouldn't work correctly...
Yeah I also found the OBEX using Advanced Config. But that didn't seem to matter... I hope anyone knows a solution for this, because it's really annoying! I have contacted the HTC Helpdesk... but didn't get much help. After giving all details about the problem they send me a manual of how to turn on the bluetooth radio on a mobile device :|...
Have you tried reflashing with the latest update from the HTC website?
This problem is getting weirder... I've now found that I can send files from my TD2, it's just the recieving of them that won't work. So I think it must be a possible compatibility issue between WinMob 6.5 & the older version on my TD...
Has anyone got an idea to solve this problem...?
No intention of being a smartass though...
Have you checked the box "visible"?
magnus66 said:
No intention of being a smartass though...
Have you checked the box "visible"?
Click to expand...
Click to collapse
Hey Magnus,
I do have checked that box and it's visible. I have done all there can be done (the easy way) on the TD2, but all settings are correct. I can also see a list of available bluetooth services on the phone, which also describes the one I need. But when I then try to connect my pc with my phone, I can only choose on my pc between:
- Dial-up Connection
- Network Access Point
Only those 2... when there are much more available according to the list on the phone...
Have you tried to connect to your "old phone" as you mentioned?
Sending receiving between those phones