Anyone got any deepr inside knowledge about the availability of Tellme for WM6.5 and the HD2...bit frustrating! Also has anyone fixed the installation and running of Voice Command?
Tellme is currently only available on some US (carriers) handsets (see tellme Web site); as for Voice Command, this application works well: the only problem you may encounter is that there is no key to map it. To overcome this, use third-party application such as AE Button Plus...
For MSVC, please see the thread below:
http://forum.xda-developers.com/showthread.php?t=585289
There is an outstanding problem with MSVC in that it doesn't reliably work through Bluetooth headsets. You can get the 'beeps' thorugh the headset but spoken responses from MSVC come via the HD2 speakers.
Why can't you speak voice commands through bluetooth headsets or integrated car bluetooth setups exactly? It claims to support it, are you saying that the HD2 does not somehow?
Related
Hi,
I'm no developer so I don't know if this would work but if there is a developer out there with spare time and knowledge of the Bluetooth Stack, maybe they can confirm if this is possible and even write something.
Headsets like the Motorla H700 and the Jabra J10 seem to lose the ability to activate Microsofts Voice Command after the first call. I notice that if I run Cyberon's Speed Dial after this happens, Voice Command activates when the headset button is pushed.
Cyberon's Speed Dial is obviously resetting the connection or something. So wouldn't it be possible to write a small wrapper that would reset the connection to the headset and then launch Voice Command. This utility could be set in the registry for Voice Dialing and it would reset and launch Voice Command.
If this works it would make a lot more bluetooth headsets useable with Voice Command.
Just a thought (as dumb as it may be
Hi,
Search the forum..there is a solution with A2dp and the compatible BT headsets.
I searched didn't see it, if there is a solution, can someone point me to the solution or thread.
I know most people seem to be adding MS voice commander to their TyTn's but I have that much software on my M3100 that I want to use the Cyberon installed software.. It does just what I need, launch progs and voice dialling from my contacts list..
I don't require anything else except......
How do I get my SonyEricsson HBH-300 BT handsfree to actually use it's microphone when trying to make voice commands..
I was wondering why I had been having so much trouble dialling when driving, reading a few other threads it appears ( and now I've tested it) that the mic only works on a call, it uses the M3100's built in mic to receive the voice command, not a lot of use in a noisy vehicle..
Any suggestions please...
If I need to reg hack, what is the best software to use with the M3100. I tried I had for my OLD pda running wince 2003 but it doesn't seem to like WM5
Any help please... Phil
When I press the bt500's headset button to activate voice command I still have to speak into the trinitys built-in microphone and the responses come from the built-in speaker.
I've had a look around and the solutions so far seem to be for wm6, im still on wm5, or reg updates for keys I dont seem to have.
My apologies if I have missed anything obvious but is there a solution for this problem?
Also while im here is there a way to turn off the confirmation request for dialing contacts through voice command.
I'm having the same issues. I owned an imate Jamin before the this and it worked perfectly. I understand the jamin was manufactured by HTC so I do not know why the p3600 doesnt work.
Will Hermes Fix work?
Does the hermes fix for the voice command 1.6 issues work on the trinity?
http://wiki.xda-developers.com/index.php?pagename=Hermes_Utils
I've done some searches and not found anybody who manages to use MS voice command through a hands free headset.
I've just bought a parrot bluetooth hands free for my car. I'd hoped to be able to use MS voice command for voice dialing. I get the actual phone call through the hands free, but the voice prompts for VC come through the phone and the mic on the phone is used for voice recognition.
I've read people hacking about to get all audio through the hands free, but the hack I've seen disables VC.
Does anyone know if it's possible? Or is there any other software that can be used for voice dialing through the hands free. I'm guessing not if it's htc bad implementation of the bluetooth stack.
Cheers
it is definitely possible - if with BT handsfree you mean bluetooth headsets. With my Jabra BT620s i could use MS voice commander 1.6 and give instructions....it ALMOST works, in the sense that it technically does the job but, at the end, i didn't like it: too sensitive to noise and to....my english....
andrewpmoore said:
I've done some searches and not found anybody who manages to use MS voice command through a hands free headset.
I've just bought a parrot bluetooth hands free for my car. I'd hoped to be able to use MS voice command for voice dialing. I get the actual phone call through the hands free, but the voice prompts for VC come through the phone and the mic on the phone is used for voice recognition.
I've read people hacking about to get all audio through the hands free, but the hack I've seen disables VC.
Does anyone know if it's possible? Or is there any other software that can be used for voice dialing through the hands free. I'm guessing not if it's htc bad implementation of the bluetooth stack.
Cheers
Click to expand...
Click to collapse
I have the same problem - has anyone found a fix?
Incoming calls are fine, also connections that are made after the initial user-to-phone command.
I also have a diamond and this operates just fine ie the MSVC prompt comes through the bluetooth OK.
Thanks
PS yes, I have tried changing HKLM\Software\Microsoft\Bluetooth\AudioGateway
BTAGExtModule =vcbthag.dll to BTAGExt.dll
I used to have VoiceCommand and BlueAudio perfectly working on my X1. Now this crappy X2 that messes up so much, canNOT run any Audio to the Bluetooth Headset.
It should have the MS Bluetooth Stack so these programs should work. Perhaps it is some registry change that makes them work?
Anybody got them to work and know how to? Thanks!
It seems that the Bluetooth AudioGateway dll files is not working properly. Tried different dll's from different versions but still did not find the "correct" working one. Anybody???
Couldn't get MS Voice Command working.
Vito Voice Dialer works great though.
Haven't managed to make my X2 work with my existing bluetooth headset.
X2 says it's paierd with the device, but then you can't answer calls or anything else.
If it wasn't for the $$$ I spent to buy this piece of crap, I'd have a new phone already!
Okay, is this vito voice dialer dialing VIA bluetooth or not? And HOW do you press a key on the phone to activate it? What key? And just read their manual, they don't even mention any bluetooth capability there. Can you use bluetooth and how?
Because voice command works (more or less) HOWEVER NOT via bluetooth and since there is NO hard/software button to assign to it, it cannot be activated via the phone either!
I have to press the bluetooth button and then the sound (mic and voice) come out of the phone speaker.
I strongly think this has to do with the bluetooth gateway SE is using with the X2. But I was hoping somebody technical could have found a solution by now. For me voice dialing is essential and my X1 was perfect.
With blue audio I could listen to musik on a mono bluetooth!
Just to mention it, I use SE hbh-PV740 and it always works if making 'regular' calls via the phone over bluetooth. But I cannot initiate it nor voice dial.
I can't get my X2 to do anything with my bluetooth kit, so all your questions re: bluetooth I can't answer.
I start vito from a button on the screen and it works.
For me and my phone, the vito product is much more accurate and reliable than voice command.