Sorry if this has been addressed.
I was wandering if LEO has proper 2D/3D graphics deivers. We know they have been omitted on multiple previous HTC/Qualcomm models. Does Leo have hardware acceleration truly enabled out-of-the-box or does it suffer same issues as Diamond, Raphael (TP1) and Rhodium (TP2)?
Thanks in advance.
id also like to know this and also what is the gfx power and how does it compare to other phones
Have a look at the video comparing HD2 with HD OpenGL performance using my test app. (link in first post of my OpenGL test app (check my sig)) and read this thread.
Related
Hi,
I want to build a nice 2D GUI for the Touch Diamond II and the Touch HD. What would you recommend to use? OpenVG or OpenGL? Does the beta driver available on this board improve the performance of one of these?
Can someone give me reference pages (or posts) where I can find information about using OpenVG on the Touch Diamond II (or Touch HD)?
Greetings and thank you,
BenPa85
Hey guys!
I just wrote a little OpenGL ES application for my HD2 (just renderings ome quads). And guess what: it runs MUCH slower than any other HTC device I had.
The framerate is < 1. Even the MS Device emulator runs faster!
How's that possible? I thought the HD2 was super fast (according to several benchmarks I saw).
Is there some scret registry hack? A magic driver?
WTF! This can't be true....
must be wm 6.5
IT must be wm 6.5 certainly. are all your others on 6.5 too?
No, they are WM 6.1.
So: does WM6.5 suck up all the computational power? I don't hope so
Are there any tweaks neccessary to make OpenGL ES run smoothly under WM6.5?
Okay, just realized I posted to the totally wrong forum. Sorry!
Please close this one.
VanKurt said:
Hey guys!
I just wrote a little OpenGL ES application for my HD2 (just renderings ome quads). And guess what: it runs MUCH slower than any other HTC device I had.
The framerate is < 1. Even the MS Device emulator runs faster!
How's that possible? I thought the HD2 was super fast (according to several benchmarks I saw).
Is there some scret registry hack? A magic driver?
WTF! This can't be true....
Click to expand...
Click to collapse
can i hv that App? need to try it on mine and will let u no...
According to several posts on the application section it only seems to have drivers for OpenGL ES 2.0, did you write it in OpenGL ES 1.1? That might explain the slowness (which in my view is a big no-go... how could HTC do that to this device... omg).
You might aswell want to read this topic about improving the performance (NeoS2007 at the driver developing again):
http://forum.xda-developers.com/showthread.php?t=584966
This is the Developmental forum, please refrain from creating a thread here unless the thread meant to actually develop something. Read the forum rules, it's clearly stated in there.
First of all I'd like to thank darkstone for these awesome tweaks.
I was wondering how these performance gains were obtained. Did they come at any cost to video quality and do they cause an increase in all 3d performance or just in certain situations? Can we expect anymore optimizations?
Is it at all possible to overclock our GPUs so we can get some decent performance out of our crappy z430s?
they tried but came to the conclusion its impossible h**p://forum.xda-developers.com/showthread.php?t=710850&highlight=overclocking+gpu
Damn it, that sucks
Thanks for the link.
i think it is all about crap htc drivers , the original htc drivers for all of its phones are sh*tty what proves my point is the darkstone graphics tweaks that gives results better than stock android devices with same gpu on neocore (nexus (28.6) desire (28) ,evo 4g (25 ) HD2 with fix (31.5)
The speed improvement is noticeable with that graphic tweak, i have tired to play Asphalt 5 and it is much much smoother than previous build , even faster , smoother than the NexusOne and Desire.
can be del.
I hope there is additional room for improvement at least with driver optimizations. Real bummer that we can't OC though. Looking at that other thread, it looked like HTC didn't feel that the kernel needed to have control over GPU clocks...
Guys,
just 2 quick questions,
I've noticed various Roms which state the GPU+ Patch (2D+3D) to improve the graphics performance, is this already applied on the HD2 Roms, if no, then is it possible to apply it to the HD2 Android Roms?
also,
I've just noticed a HTC Sensation Rom ...
http://forum.xda-developers.com/showthread.php?t=1098849
Which states that the 3D engine is Overclocked to boost performance, is this possible for the HD2?
regards
it will be great for ours HD2's!!
bumped
raziel123 said:
Guys,
just 2 quick questions,
I've noticed various Roms which state the GPU+ Patch (2D+3D) to improve the graphics performance, is this already applied on the HD2 Roms, if no, then is it possible to apply it to the HD2 Android Roms?
also,
I've just noticed a HTC Sensation Rom ...
http://forum.xda-developers.com/showthread.php?t=1098849
Which states that the 3D engine is Overclocked to boost performance, is this possible for the HD2?
regards
Click to expand...
Click to collapse
any answers Mods/Guys?
issnt Chainfire 3D already slightly doing that, but its more off utilizing RAM instead of CPU though...
jcsy said:
issnt Chainfire 3D already slightly doing that, but its more off utilizing RAM instead of CPU though...
Click to expand...
Click to collapse
I don't think so JCSY ... Chainfire 3D Emulates the functions of Adreno/Tegra chipsets etc
it does not overclock the Adreno 3D Engine/processor speed. and as far as I have found, it is not intended to Boost 3D performance of the Adreno Chip through tweaks ...
regards
I saw there are different way to improve video performance on W.M.
I read on Internet that my device has Adreno 130 GPU or GoForce 5500 (different sources).
---Driver Pack (2d and 3d)(by Neos)
---Turbo 3d and GfxBoost (3d)(by Chainfire)
---Diamond ATI Drivers (I don't remember)
1---Which of them impove video performances in the best way? Which give best results in benchmarks?
2---Can I install all? (I think no: it will apply only one of them...)
3---Maybe also the type of CPU change something? (arm/xscale)
4---Do you know other softwares like these?
Mich-C said:
I saw there are different way to improve video performance on W.M.
I read on Internet that my device has Adreno 130 GPU or GoForce 5500 (different sources).
---Driver Pack (2d and 3d)(by Neos)
---Turbo 3d and GfxBoost (3d)(by Chainfire)
---Diamond ATI Drivers (I don't remember)
1---Which of them impove video performances in the best way?
2---Can I install all? (I think no: it will apply only one of them...)
3---Do you know other softwares like these?
Click to expand...
Click to collapse
Hi! Seeing your device uses either an Andreno or GoForce GPU (figure that out first, btw. Really important if you want to improve it) I'm wondering, which device are we talking about?
NeoS said:
Hi! Seeing your device uses either an Andreno or GoForce GPU (figure that out first, btw. Really important if you want to improve it) I'm wondering, which device are we talking about?
Click to expand...
Click to collapse
I have a Toshiba Portege G910.
I read that a guy installed your driver pack on it and performance are a bit better.
Ah, the Portege. Yes, this device could potentially benefit from the driverpack.
NeoS said:
Ah, the Portege. Yes, this device could potentially benefit from the driverpack.
Click to expand...
Click to collapse
Thanks Neos.
Can you answer my question in my 1st post? (Are Chainfire's apps better then yours? )
I'm not sure if GFXboost and Turbo3D work on the MSM7200 chipset. If I recall correctly, @Chainfire 's apps are made on and for the MSM7201A chipset?
The driverpack is a collection of tuned driver files, which give a better performance on most MSM7200 devices. Chainfire's apps are applications to boost performance in 3D OpenGLes. (correct me if I'm wrong, though)
And the only way to be sure, is to test it for yourself. :good:
NeoS said:
I'm not sure if GFXboost and Turbo3D work on the MSM7200 chipset. If I recall correctly, @Chainfire 's apps are made on and for the MSM7201A chipset?
The driverpack is a collection of tuned driver files, which give a better performance on most MSM7200 devices. Chainfire's apps are applications to boost performance in 3D OpenGLes. (correct me if I'm wrong, though)
And the only way to be sure, is to test it for yourself.
Click to expand...
Click to collapse
I was joking.
So does it matter the type of CPU and not the type of video/graphics card...
I will try both softwares but I will do an Hard Reset bewteen their installation because I don't want to mix different things.
I will use GLBenchmarks to do benchmarks.
Anyway Chainfire doesn't answer me.
I only installed GFXboost but i have an error "Unable to find concurrencemgr.dll"
NeoS said:
I'm not sure if GFXboost and Turbo3D work on the MSM7200 chipset. If I recall correctly, @Chainfire 's apps are made on and for the MSM7201A chipset?
The driverpack is a collection of tuned driver files, which give a better performance on most MSM7200 devices. Chainfire's apps are applications to boost performance in 3D OpenGLes. (correct me if I'm wrong, though)
And the only way to be sure, is to test it for yourself.
Click to expand...
Click to collapse
I ask you because you have a lot of experience about these things.
Your driverpack improve DirectDraw (2d) and Direct3d (3d).
How can I also improve : API / GAPI / GDI / Qtv Display / OpenGL ?
Other phones have update versions.