Boot issues since CyanogenMod 4.2.4 - G1 General

My G1 aka dream will not boot with the slider closed. If I open the Slide and force boot it, I will see the std Tmobile G1 graphic then then the CyanogenMod boot screen. and all is well. I can use phone.... Until I close the slider and it goes to locks. then then I cant unlock, cant get screen response other than the back light and the keys will light up as if they are being pressed. but no output to the screen
If I then open the slide and press End, back and menu (2x) it unlocks and phone works fine.
essentially the phone is dead when closed.
I have gone back in mods, I have downloaded and currently have the Std HTC developers build on here and it is doing the same thing.
Help, I am a Newbe @ this and can do basic flashes, but right now I cant even get the phone to recognise in fastboot. so I don't know if I have a half brick or what.... it's just weird that it works fine when open

Ok. There are no half-bricks. It either is or isn't. Firmare runs or is broken. With that out of the way, your first step is wipe/system reset from recovey, wipe sdcard partitions and reflash cyanogen. Some things to look into (search function in these forums): fix permissions, reroot. Amon_ras recovery. If its not resolved by sofware, something may be wrong with the hardware, in which case go through t-mobile if you have a warranty through them or if your phone is less than a year htc has warranty coverage.
PHP:
Hope this helps.

Related

Crap, now I've done it

Long story short I've got a Rogers Dream, 32B, 2005 SPL that up until recently I had only rooted. When I'd press power and home it reported Cyanogen JF 1.2 I believe.
I was trying to update my ROM, long story short I renamed the signed-dream_devphone_userdebug-ota-14721.zip to update.zip, (because I didn't have any option to select which file I wanted to use to update) loaded it, then realized I was unable to access the SDcard in any way (card reader, etc) to replace that file with the latest cyanogen rom.
So now my phone is stuck at the Rogers boot logo, and I can't get into fastboot or the loader screen.
How effed am I? As effed as I suspect? Anyway to recover this thing, or did I just dumbass myself into a $350 paperweight?
unfortunately I think I am running into a problem just like yours.. I'm running AmonRA 1.5.0 recovery. For a few days it was working fine. I basically did a wipe on the phone and restarted the phone hoping to get the command list to come back up but now I don't get anything but a HTC recovery logo on my phone. I've been pressing a combination of all kinds of buttons to see if there is a way to bypass the recovery console but I'm getting nothing but that HTC logo (which should be something like the Android mascot for some of you), yet I am also not getting to see the T-Mobile G1 boot screen (US Phone) anymore, I assume you don't see your carrier on your screen neither..
Anyways, if anyone can give us any advice, your support will be greatly valuable.
Pull the battery, once the device is off replace the battery. Hold down the camera button and press the power button. If you get to a rainbow colored screen, or a white screen with Androids on skateboards you are not bricked. If you are unable to get to one of these screens I am afraid you have a paperweight, or at least until someone figures out the JTAG pins to manually re-write the startup code back to the phone.
If you can get to one of those screens, you are in good hands! If you have a T-Mobile G1 then simply download this and extract the file within (DREAIMG.nbh) to the ROOT directory of a freshly formatted (FAT format) SD card.
Just reboot the phone with the camera button pressed and follow the directions.
This will get you back to Android 1.0, please follow guides from that point forward.

PLEASE help! STUCK ON "X" SCREEN!

I have a N1 and its worked fine for a while then i noticed when i turned it on it just stays at the "X" boot up screen.. I have already tried to reset the phone, clear storage, reboot,, and nothing fixes it. What can i do.. i know there has to be a way to load software back onto it or fix whatever is wrong with this thing. please help and thanks for our time.
can you get into the bootloader menu? by holding trackball and power button?
if yes then follow
http://forum.xda-developers.com/showthread.php?t=623496
wow,, ive done some programming and flashing to phones before but trying to follow those instructions and make sense of it all, isnt working with me. Thanks for the advice but that thread doesnt help me to much. i tried downloading everything it says i need and i cant figure it out.
rustynuttz said:
I have a N1 and its worked fine for a while then i noticed when i turned it on it just stays at the "X" boot up screen.. I have already tried to reset the phone, clear storage, reboot,, and nothing fixes it. What can i do.. i know there has to be a way to load software back onto it or fix whatever is wrong with this thing. please help and thanks for our time.
Click to expand...
Click to collapse
another app2SD thing after flashing a new rom?
well then you know more then me. If you can get into bootloader you should be able to get into recovery mode. You can also toggle USB mode, so you can be connected to your comp. In that case you can push a recovery image.
http://forum.xda-developers.com/showthread.php?t=611829
you can also wipe
etc
its all in that thread or somewhere else on this forum
rustynuttz said:
I have a N1 and its worked fine for a while then i noticed when i turned it on it just stays at the "X" boot up screen.. I have already tried to reset the phone, clear storage, reboot,, and nothing fixes it. What can i do.. i know there has to be a way to load software back onto it or fix whatever is wrong with this thing. please help and thanks for our time.
Click to expand...
Click to collapse
Any updates? same thing happened to me.
If in doubt then reflash everything again;
boot
system
and recovery
and start afresh.
see thats the thing,, i can click recovery from the bootloader screen and nothing happens. It will restart and just sit on the same "X" screen. Its very simple to put a phone into a DFU mode or recovery mode for Iphones,Motorolas,blackberry,nokia,samsung,Lg, and a few more i cant think of at the moment. When these phones become corrupt ive learned how to whatever firmware or software i want on dumb thing.. But this HTC is giving me a hard time and i know its something simple.. Most phones have a desktop software that will allow you to mess with phones programming, Itune-iphone/Blackberry-BB desktop Manager/motorola-RSD lite....ect. BUt i cannot find anything really for the HTC or just this N1. A lot of these programs for other brands, once you plug your phone in, will notice that the phone is in a recovery state and offer to do an update or a restore. Now why doesnt the N1 or do they, does google offer something like evryone else does?
rustynuttz said:
see thats the thing,, i can click recovery from the bootloader screen and nothing happens. It will restart and just sit on the same "X" screen. Its very simple to put a phone into a DFU mode or recovery mode for Iphones,Motorolas,blackberry,nokia,samsung,Lg, and a few more i cant think of at the moment. When these phones become corrupt ive learned how to whatever firmware or software i want on dumb thing.. But this HTC is giving me a hard time and i know its something simple.. Most phones have a desktop software that will allow you to mess with phones programming, Itune-iphone/Blackberry-BB desktop Manager/motorola-RSD lite....ect. BUt i cannot find anything really for the HTC or just this N1. A lot of these programs for other brands, once you plug your phone in, will notice that the phone is in a recovery state and offer to do an update or a restore. Now why doesnt the N1 or do they, does google offer something like evryone else does?
Click to expand...
Click to collapse
hmmm I understand your frustration. What did you do before it got to the 'X' splash screen?
I'm assumimg you've tried to reflash a different ROM in recovery mode?
rustynuttz said:
Most phones have a desktop software that will allow you to mess with phones programming, Itune-iphone/Blackberry-BB desktop Manager/motorola-RSD lite....ect. BUt i cannot find anything really for the HTC or just this N1. A lot of these programs for other brands, once you plug your phone in, will notice that the phone is in a recovery state and offer to do an update or a restore. Now why doesnt the N1 or do they, does google offer something like evryone else does?
Click to expand...
Click to collapse
The SDK can do that
like the others said, try get into recovery and reflash everything
SDK? i just turned the phone on and its stuck on the "Splash" screen just a big ol "X". I press volume down and power and pull up the bootloader menus.. i scroll down to recovery and press enter. and it reboots and stays at the damn "x" screen again. I've chosen everyone of the options it offers in that menu and nothing changes.. You know how when u first open that menu it will scan the SD card? Well it shows up for a second then goes away, and in the split second the green lettering is on the screen i swear it says "no splash image" or something like that. UHHHHhhhg!
Hmm I forgot how to get to get to recovery using physical buttons, sth like: power + trackball, or volume down + trackball i guess, so try that
So it looks like your phone is not rooted and you don't have Amon_Ra recovery maybe you have not even turned on USB debugger? tough luck friend
All is not lost if you can get into fastboot mode trackball and power together then using adb reflash boot,system and recovery images.
Or call Customer Service and trade in for a new Nexus One
if not you have to download the SDK http://developer.android.com/sdk/index.html
find stock images and reflash like the above post said
duylong186 said:
Or call Customer Service and trade in for a new Nexus One
if not you have to download the SDK http://developer.android.com/sdk/index.html
find stock images and reflash like the above post said
Click to expand...
Click to collapse
agreed....if you haven't "unlocked" the bootloader then i wouldn't bother with any of the suggestions....Call customer care and get a new one before you un-lock it and this mysteriously happens again...THEN, you'll be S-O-L!!
EDIT: Then with the new one, follow all the threads for un-locking, flashing recovery, nand,flash cyan, flash gapps LALALA
DOUBLE EDIT: Althought it sounds all you've done is messed up the recovery image, which you could re-flash. Then you could get into recovery and flash Cyan, having a functioning phone again

[q] help! Bricked samsung intercept!

Last year(late 2010, maybe mid November), I rooted my phone and flashed recovery with no problem s at all. Some time after that I added Apps2SD and that went smoothly with no problems for about a week. I purchased an 8 GB SD Card for more storage room and after I partitioned it and switched the cards my phone started acting up so i rebooted it. After that I was stuck in a boot loop, so i tried to flash it back to stock but it wouldn't take to it no matter how I tried, whether it be through recovery or SW Update. So then I tried Odin Multi loader(cant remember which version but at the time I made sure it was the one meant for the Intercept) after I flashed it with the Stock through Odin, the phone bricked. Now it will not turn on in any way(recovery or other) the only thing it does do is vibrate when I plug it in to a computer, and it will occasionally show battery life through the touch screen and keyboard buttons by lighting them, but as soon as the it is unplugged it is a brick. I see the little bit of functionality as a little bit of to be able to fix this phone whether through ADB or another function but I desperately need help with this. Can someone please help me fix this phone?
note: I currently have a Samsung Transform as my main phone so if the Intercept can't be helped then it's not that big of a problem.
I have the same problem! Please help!
When you root a phone you put the rom, and recovery onto the sd card. changing sd cards disrupts this process. Put the old sd card in and tell me what happens.
The phone doesnt come on at all
see if you can get it into download mode with the battery out.
Pull battery
connect to computer with usb
vol down + camera + end
If you get into download mode this way flash the stock.tar using SWUpdater.
Nope, it doesnt work, thx though
Ok I've got the same problem with my intercept as well, So i just like to add (maybe its just me) that when i plug my phone to the computer the phone shows that its still functions right (without the screen on), I'm able to make calls, and receive them as well (with the touch of the answer button) but just the screen doesn't turn on, AT ALL!, so KJON i don't know if your having the same problem as me but I'm just a noob and i wouldn't know what to do. But there's some ammo if you need it.
I HAVE THE SAME PROBLEM! i dont even know where /sdcard/sdx/zip/ is!
My phone is also a samsung transform and not and intercept and whenever i press vol down+ Power, only the function buttons at the bottoms light up but not the screen
i am a noob.
help?
noooooob here...i didnt wanna start another thread since i have this same problem, so i hope someone reads this..
couple days ago i bricked my sprint intercept i was using SWu and forgot to take the Binary files for the Moment out so now i cant get my phone to DL mode, ive been searching since saturday night and have tried every Button combo posted and nothing, my phone will not turn on and ofcourse it isnt recognized by my pc BUT, ive noticed that only when its plugged in to the computer after trying to power it up several times it´ll vibrate then the 4 touch buttons will react to either the call or end button, also it makes the low battery sound and if i press the camera button it makes the volume sound but i CANT get to download mode, can i bring my phone back or is it done with? help please! and thanks in advance...
well, i would say boot into rrecovery by making the phone off either power button, or remove and replace battery.
next, you will need to press and hold in order: power/end call, call, and volume down.. this should boot recovery mode.
lastly, use the red scroll device to go to reset facory defaults or factory recovery, use common sense while looking. select with clicking and use arrow back button to go back to recovery main, then reboot to system. easy as pie.
Have you tried ODIN or ADB?
I have flashed the Intercept numerous times, soft bricked more than once, I was always able to recover using either the stock bootloader, CWM recovery, or flashing the ROM/Kernel directly using ODIN or ADB.
If you are still having these issues drop me a line and I'll gather some links together that should get you back up and running.
If the phone will not boot at all, even with a charged battery, I would definately try contacting Virgin Mobile and escalating the issue. I've had plenty of luck replacing devices claiming that the device just dropped dead without notice. They are usually good about sending out a replacement phone, and on rare occasions even giving you an upgraded unit if they are out of stock.
Good luck!
Did you use Odin or the swupdater?
Bug difference. Sounds like there's a missing boot loader.
Sent from my SPH-L710 using xda app-developers app
Hi, did you guys fix your bricked phones? Today I have bricked my Samsung transform (bad flash went with SW upgrade.
Only vibrates sometimes and the buttons flash a little, but no boot at all. Is there any chance to fix it? even with Jtag?
regards

Digitizer broken, ADB off, Recovery gone, please help?

A few months back, I broke the digitizer on my AT&T G2, and the bottom 5th of the screen stopped registering touches. Which sucks when you have on screen buttons. I was on CM11 at the time, so thankfully I was able to unlock the screen just fine and use screen rotation (combined with the Rotate app) to do almost everything I needed. One time I even did a wipe and clean install of CM11 and was able to use screen rotation to re-set up my phone to how I needed it.
Today I did a clean wipe and flashed CloudyProII 2.0 onto my phone, assuming I could do a similar set-up. Everything went well until the first screen, which has a next button at the bottom and doesn't rotate. I'm not able to pull down the menu bar, and since this is a clean install, ADB is off, and my google account isn't set up. So I decided to just reboot to recovery and re-flash CM11. Only for some reason the LG G2 button combo to reboot to recovery isn't working (maybe CloudyProII removed my custom recovery?), though the Download Mode combo is (and confirms I'm rooted still).
So now I'm stuck with a phone I can't use, and I'm sure there's an easy solution that will get me up and running again. If anyone can offer any advice, I'd be tremendously grateful!
EDIT: I was able to get into recovery and all is good now! Nevermind!
milespordeo said:
A few months back, I broke the digitizer on my AT&T G2, and the bottom 5th of the screen stopped registering touches. Which sucks when you have on screen buttons. I was on CM11 at the time, so thankfully I was able to unlock the screen just fine and use screen rotation (combined with the Rotate app) to do almost everything I needed. One time I even did a wipe and clean install of CM11 and was able to use screen rotation to re-set up my phone to how I needed it.
Today I did a clean wipe and flashed CloudyProII 2.0 onto my phone, assuming I could do a similar set-up. Everything went well until the first screen, which has a next button at the bottom and doesn't rotate. I'm not able to pull down the menu bar, and since this is a clean install, ADB is off, and my google account isn't set up. So I decided to just reboot to recovery and re-flash CM11. Only for some reason the LG G2 button combo to reboot to recovery isn't working (maybe CloudyProII removed my custom recovery?), though the Download Mode combo is (and confirms I'm rooted still).
So now I'm stuck with a phone I can't use, and I'm sure there's an easy solution that will get me up and running again. If anyone can offer any advice, I'd be tremendously grateful!
EDIT: I was able to get into recovery and all is good now! Nevermind!
Click to expand...
Click to collapse
you can always get a usb otg + mouse and us your phone like that or replace the screen

VS980 Bricked after factory reset through TWRP...Please help

So basically my phone was stock but rooted and modded slightly with volume boost, camera mod, and the multi window mod as well. Other than that its all stock and never flashed a Rom on it. The phone ran smooth about 90% of the time but there were little quirks here and there that kind of bugged me. For example, every once in a while the screen wouldnt wake up after being locked via button or double tap. Wifi wouldnt respond randomly unless I reset my phone. Things of that nature, but anyhow I decided maybe hard reseting my phone might clear up some of these issues. I got into TWRP from AutoRec, and checked off everything except internal storage. I believe they were Davlik, Cache, System and obviously it didnt work out for me. I feel like me checking off the system is what did it because it wasnt considered a basic swipe at that point. Anyhow I cant get to recovery, download mode or anything of that sort. Everytime I hold down the power button it just resets and brings me back to the LG logo and just sits there while the led lights keeps rotating colors. Is my phone done for?
edit: Oh yea one last thing, I remember when I went to reboot it I somehow ended up being asked if I wanted to install SuperSU and I said yes. And than at that point it went to restart my phone and got stuck.
fjgotgame24 said:
So basically my phone was stock but rooted and modded slightly with volume boost, camera mod, and the multi window mod as well. Other than that its all stock and never flashed a Rom on it. The phone ran smooth about 90% of the time but there were little quirks here and there that kind of bugged me. For example, every once in a while the screen wouldnt wake up after being locked via button or double tap. Wifi wouldnt respond randomly unless I reset my phone. Things of that nature, but anyhow I decided maybe hard reseting my phone might clear up some of these issues. I got into TWRP from AutoRec, and checked off everything except internal storage. I believe they were Davlik, Cache, System and obviously it didnt work out for me. I feel like me checking off the system is what did it because it wasnt considered a basic swipe at that point. Anyhow I cant get to recovery, download mode or anything of that sort. Everytime I hold down the power button it just resets and brings me back to the LG logo and just sits there while the led lights keeps rotating colors. Is my phone done for?
edit: Oh yea one last thing, I remember when I went to reboot it I somehow ended up being asked if I wanted to install SuperSU and I said yes. And than at that point it went to restart my phone and got stuck.
Click to expand...
Click to collapse
You wiped system. That's your rom. Don't wipe system unless you plan on flashing a rom. You should still be able to get back to recovery. From phone powered off state ( hold power and volume up when lg logo is on). Hold power and volume down, when lg comes on, release both, then hold both again. You should now be at the factory reset screen. Press power three times (it's not going to factory reset). You should be in recovery. From here, restore your backup. If you don't have a backup, you just found out the reason why you should always have a backup. If you don't have a backup, you're going to need to install a rom via adb or otg (assuming your recovery is up to date). You can also tot or kdz back to stock (wipes sdcard though).
Return to stock thread: http://forum.xda-developers.com/showthread.php?t=2448960
nexus 7 4.4.4 f2fs

Categories

Resources