i got this problem wiv my touch hd, its unlocked 2 t-mobile uk n i had no problems with it b4 bt now its has stopd recieving calls or txts bt it tell me tht there is full bars n that its on 3g tmobile connection, it any1 got any ideas abt this problem i wood be vey greatful
Related
I just switch to 3G instead of 2G. I want to experience the high speed internet suffing via my handset.
But I found the problem is that the phone call can't came in if I using the 3G data. Not even transfer to security services. Just a "Busy tone".
Check with the service provider and they are now checking with their technical dept to see if they can found the problem.
They said that the call should be able to come in because the phone call channel is different to the data channel. :roll: :?:
Anyone experience the same problem?
I experienced the same problem with my CHT9000. You may change the setting to GSM then call can come in when you using GPRS but you can't enjoy the high 3G speed on data transmittion. Anyone has better solution?
complicated issue; can be the same with GPRS/EDGE ; I made a lot of research read below;
http://forum.xda-developers.com/viewtopic.php?t=54738&highlight=
It is interesting. I don't have this kind of problem while I am using GPRS. But it happen to my new network provider (3G).
Lucky you then :lol:
At least you have GPRS/EDGE working and as a result it is absolutely a network provider issue.
I talked every detail with a guy in my Net. Op. and seems can be solved by "tricky switching something on" but they could not make me believe that this is not thier mistake. Because Class B phones MUST suspend the data flow and accept incoming calls for the technical point, only class A phones (no retail ATM) can make data flow and GSM talk at the same same.
GPRS is 2G, EDGE is 2,5G and same tecnique as 3G, only speeds are lower, so I beleive if u use 2G suspend while incoming calls your Net.Op. can solve the problem if they want :wink:
I have this strange problem with my vario II.
I am using Tmobile GPRS on both 2g and 3g network, If I am using the 2g phone works if If am using 3g phone doesn't work if I call it, the phone rings but doesn't alert me. The most annoying problem I am having is the phone switches between 2G and 3G if I am in a call the phone goes silent can't hear anything the display shows the call as connected and around 5-10 seconds later the phone drops call drops. This happens even if the data connection if not active.
What is the deal with that? anyone else have this problem.
Phone band settings are below
network type
Auto
GSM
GSM(900+1800)+UTMS(2100)
I've just discovered the same problem with my orange branded tytn, I'll be phoning them later to ask what they can do about it.
xxnoelziexx said:
I am using Tmobile GPRS on both 2g and 3g network, If I am using the 2g phone works if If am using 3g phone doesn't work if I call it, the phone rings but doesn't alert me.
Click to expand...
Click to collapse
Works perfectly on T-Mobile UMTS for me. I did flash the Dopod 838Pro ROM though.
will flash the dopod rom in the morning. I am currently using the imate rom, and the tmobile rom the device shipped with had to many slow downs so it had to go. if this fixes the drop out issue I will be happy if not the phone will be in its box till a rom update. got the phone cheap so don't really mind. nice phone/pda apart from this issue in my line of work can't afford to miss or drop calls.
so is this a hardware or a software issue then?
No harware problem, it is absolutely software issue. Read my posts above and the links I gave
No problems here I'm afraid.
Voda v1605 running the Voda Blackberry Client, so either 3G or GPRS (where no 3G available) on all the time. Calls and SMS received perfectly.
Only issue I have is when using 3G, unlike home wired broadband, I cannot use multiple applications through the single 3G connection (e.g. Blackberry client on and surf too)
Steven
I was under the impression that once you are connected to a 3G/UMTS network, you can be online and make phone calls at the same time?
I just tried it but my TyTN told me to end the phone call first before connecting. I have the U on top and my speed test (dslreports) indicated a 662kbit/s rate. Any comments?
I believe I have one of the older 3G SIM card. Initially, I didn't think I even had a 3G SIM card and had some rep send me one of the new ones (with the flaming 3G on it). However, since my TyTN showed the U and had pretty decent download speeds, I assumed it would be 3G capable.
Donno what's going on .. I get email emails notifications during calls all the time (DirectPush) ... I am always connected ..
gravejoker said:
Donno what's going on .. I get email emails notifications during calls all the time (DirectPush) ... I am always connected ..
Click to expand...
Click to collapse
do you have the new 3G SIM?
All I can say is I have made phone calls while surfing on 3G.
Yes ... But with my old one .. I wasnt even able to get on the UMTS network .. in your case it's working .. you can try getting a new 3G sim and see if that helps .. prob would cost you around 25 bucks ..
I was under the impression that e TyTN was a class A device, meaning it can connect to data, or make calls, but not both as the same time. At least that's definitely the case with GPRS/EDGE connectons. If it's not the case with 3G, maybe GPRS is trying to connect in the background?
I am definitely connected to UMTS/HSDPA all the time and regularly make simultaneous phone calls...
Note that GPRS/EDGE does not support simultaneous phone/data connections. If you're not in a 3G area, you've got to choose one or the other at any given moment...
I live a little north of San Francisco which is a 3G area. Considering the U in my display and the good data rate, I am pretty certain that I am connected to 3G/UMTS. However, I tried several times today to sync my emails during phone calls but every time I am told to finish the call first
Can anyone tell me whether this SIM card is 3G capable?
tschabo said:
Can anyone tell me whether this SIM card is 3G capable?
Click to expand...
Click to collapse
If it doesn't say "3G," it's not...
It's just a regular 64K SIM ... you can get a new 3G SIM (blue colored) and see if that helps ... it's really wierd because you are able to get on the UMTS network already ...
I switched over to the new 3G card today and when I got home I tried to simultaneously be on the phone and online but once again I get the message to end the phone call first.
Are there any other settings I need to watch out for?
Can you please post your phone band and APN settings?
At this point .. I can only think of 2 options really:
a. Return your TyTN and get a new one .. if it's possible. ..
b. Try upgrading your RadioROM to 1.16 or 1.20 and see if that helps .. If you need to return your phone then this might be an issue ..
- JoKer
How can I upgrade the RadioROM ??
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms ...
Please do anything at you own risk ..
Hi, i'm from Canada, PQ, Montreal and another mate in this forum from Canada, Vancouver is having the same problem.
For the first 10-20secs after the X1i has been booted succesfully. We get the G status icon(GPRS signal) in the corner and get 2-3bars of signal, during these times, we can call/text or receive calls. After this, the G signal will be replaced by E signal (Edge), this is when i cannot make any calls nor receive any calls nor send any message. I tried this while i was in the streets in a open sky place. I tried my friend's phone and i had FULL SIGNAL (its an nokia 5800 xpress) , i tried my other phone, nokia n95 8gb, i get sky rocketing signal as well.
So the only way to call me, is to keep on trying , hoping i get GPRS status. I have tested my mom's sim card prepaid , to see if it relates to 3G internet or something , still no luck. Anyone from canada having problems?? I'm with rogers. They use 850mhz/1850mhz , i have disabled HSPDA and seletected these two bands, still no luck .... I cannot update the radio rom because its locked ....
Please help =(
perhaps we might have to unlock the phone with Fido to use voice calls on edge? i'm having the same problem. ;(
Perhaps you have to call fido to disable EDGE and use GPRS only ... i'm gonna have to refund my x1 =(
Initially, Fido worked basically with 1900MHz but since the acquisition of Fido by Rogers in 2004, Rogers integrated the networks extending coverage thru 850MHz...
Better get the X1a or change provider
I live in sweden and I also have problem with my signal. it just disapears from time to time.
Same problem here on the other side of the world; in Abu Dhabi. Sometime the signal is completely lost!
AyashiFX55 said:
Perhaps you have to call fido to disable EDGE and use GPRS only ... i'm gonna have to refund my x1 =(
Click to expand...
Click to collapse
is it possible to disable Edge?? THe "E" symbol only indicate edge reception but we are not technically connected to it. Can i actually ask them to cut Edge reception totally?
I only have the voice plan in the first place.
Hi All
Been having issues with our local t-mobile transmitter near my house, after calling them 4 times over a week because I couldnt hear half the calls I made on my desire they switched me to use t-mobile orange.
Then whilst at home my wifi started playing up on my Desire, whilst fine on my laptop. It would connect , then disconnect constantly. The only way to fix it was to revert back to t-mobile as a network carrier.
Any idea why this would be?
thanks
Paul
i have a problem. im using kyrillos v2.3 rom and i have shifted from airtel to docomo ( INDIA) so wen im using 3g internet, it gets disrupted many times while in use. wen i was on airtel i didnt have any problem like this. is this some way related to the transimission frew of DOCOMO.
some body help
thanks in advance