Database Users

Real Big Problem!!

I was running haykuros hero, i had run two optimizers and started deleting things to make space and increase performance,
I think i deleted something that now doesnt allow the phone to start.The only things i think could do this were 1, the gmail widget, this prevented the phone from syncing with my account prompting me to attempt to reflash, and 2, i had also deleted some setup app (which i thought many people had) and im guessing this is why i couldnt get past the very initial setup after reflashing.
I decided to use my card reader to flash dude 1.2 lite in an attempt to start over but it just bootloops at HTC.
I am desperate to determine what i deleted and how to put it back on my phone, PLEASE PLEASE PLEASE help in any way possible. I have card reader and adb but dont know where to start.

Honestly at this point, you're better off starting from scratch (ALT+W and ALT+S). You shouldn't loose anything but time. It's all replaceable (assuming any contacts u created since were all sync'd first). No worries, you'll be just that more familiar with your fone and how to flash it!
(P.S. No sarcasm intended )
Aloha-

i did alt w alt s when i flashed dude and it looped. I was just able to flash ion alright though so maybe that will be my starting point to get back to rosie...
So its the htc setup wizard im missing, anybody know enough about this stuff to tell me how i can get this back on my phone...

i would say you are gonna need to pull it out of the update you flashed and adb push it to your /system/app directory, i don't know for sure that this will help but it might

DMaverick50 said:
i did alt w alt s when i flashed dude and it looped. I was just able to flash ion alright though so maybe that will be my starting point to get back to rosie...
So its the htc setup wizard im missing, anybody know enough about this stuff to tell me how i can get this back on my phone...
Click to expand...
Click to collapse
What I am saying is that since you are unable to unequivocally determine which file caused this problem after deleting, it would be easier to start over again. That's worked 4 me every time I've unintentionally deleted a needed file or something similar. It might require loading another ROM (ION is great 4 this, that's what I use as well as easy if u have a backup and can just fastboot flash it) to get the app2sd info all back in the right place on the ext2 partition. IMO this is better because u all the files in their proper place and that's a good starting point. Are you using Haykuro's HERO or one of the compacted builds that don't use app2sd?
tubaking182 is also correct if you know what files u need to replace.

haret wont boot android anymore

i have been using xrom for about two months now and just now tried to boot a donut build with the new base files but now Haret wont even boot into linux its stuck at the Haret boot screen... I have formated the SD card and have the newest basefiles with a new system file and how been using android for months now and this has never happened before. Could anyone help with this?

you might have a file named wrong or corrupt or missing file.

no i just used an old kernal and it booted right in to the New Ion build... for now ill stick with this kernal and then try the new ones to see which boot successfully

oh ok what do i know.

zenulator said:
oh ok what do i know.
Click to expand...
Click to collapse
not sure what that means but ok, i just tried different files untill it worked. I know to rename the files and which need to be in the SD card I just have never had that problem before and it was only when I swapped out the kernal that it booted right up. Thanks for the help tho

lazyvegaskid said:
not sure what that means but ok, i just tried different files untill it worked. I know to rename the files and which need to be in the SD card I just have never had that problem before and it was only when I swapped out the kernal that it booted right up. Thanks for the help tho
Click to expand...
Click to collapse
it means you prob had a corrupt file. since you replaced it and it works. but you solved your own problem. what kernel gave you problems? so we can let people know there are problems with it.

no there was no kurupt file and all files are named properly, i have helped many people here in vegas get android on their phone so I would like to think i know what im doing atleast set up wise. I have the correct settings for donut on my default.txt and are using all the newest files from google-vogue. The hang up on haret is becoming a major headache, i replaced the new kernal last time with an old one from sept (last time i upgraded the files) and it booted perectly and quick. Now the last line of code reads "attempting to reset in 3 secs" I have let it sit for 10, 15 and 20 mins with the same results... not a damn thing. I have reformatted the SD card everytime and have no other files but the android files on the SD card. Has anyone else experianced this? If someone using the newest donut build could upload their files somewhere because unless im a huge idiot I swear im following all instructions to a T. Someone please help... Im not as lazy as my name states its just the only name i could think of haha so please no flaming

lazyvegaskid said:
no there was no kurupt file and all files are named properly, i have helped many people here in vegas get android on their phone so I would like to think i know what im doing atleast set up wise. I have the correct settings for donut on my default.txt and are using all the newest files from google-vogue. The hang up on haret is becoming a major headache, i replaced the new kernal last time with an old one from sept (last time i upgraded the files) and it booted perectly and quick. Now the last line of code reads "attempting to reset in 3 secs" I have let it sit for 10, 15 and 20 mins with the same results... not a damn thing. I have reformatted the SD card everytime and have no other files but the android files on the SD card. Has anyone else experianced this? If someone using the newest donut build could upload their files somewhere because unless im a huge idiot I swear im following all instructions to a T. Someone please help... Im not as lazy as my name states its just the only name i could think of haha so please no flaming
Click to expand...
Click to collapse
how far does it get before it says preparing to reset in 3 seconds

jamezelle said:
how far does it get before it says preparing to reset in 3 seconds
Click to expand...
Click to collapse
right after it says "welcome to vogue linux" this is depressing I love my 6.5 WM rom but android is the best way to go

Lets get Organized ** Post only flashable Roms****

Maybe a good idea maybe not but since google code was abolished i can't find a thing. Here is a link to an all in one flashable installation of cupcake everything is working gps, market, sms calls etc. I found that the touchscreen may not work on first install just soft reset device and all will work on next reboot. Please follow suit for whatever releases you have thanks. I take no credit in any of the work in the rom biuld we know who these acknowledgements go to.
cupcake 1.5 google-ion 9-12-09
http://www.mediafire.com/?0zniavwqg2m
All files included in zip including voguimg needed to flash nothing else needed just unzip to storage card and enjoy!!!
I will add more links in this post as people add them!!!!

mush2699 said:
Maybe a good idea maybe not but since google code was abolished i can't find a thing. Here is a link to an all in one flashable installation of cupcake everything is working gps, market, sms calls etc. I found that the touchscreen may not work on first install just soft reset device and all will work on next reboot. Please follow suit for whatever releases you have thanks. I take no credit in any of the work in the rom biuld we know who these acknowledgements go to.
cupcake 1.5 google-ion 9-12-09
http://www.mediafire.com/?2ygqzmzjzoe
All files included in zip including voguimg needed to flash nothing else needed just unzip to storage card and enjoy!!!
Click to expand...
Click to collapse
is this just standard cupcake? is it themed?

standard with a blank data file

sorry if this sounds dumb, but i have been away from XDA for quite a few months now.
so you are talking about a very flashable android ROM for the vogue? meaning kiss bye bye winmo? everything works? even MMS and camera?

MMS depends on your carrier i have sprint and i can receive via picture mail(web view) but i cannot send. Everything else works YES kiss winmo goodbye i have

I followed the guide to fix my gps In windows mobile but for some reason, it still doesn't work. Would the GPS work if I flashed android instead of running it off windows mobile?

kiwilime said:
I followed the guide to fix my gps In windows mobile but for some reason, it still doesn't work. Would the GPS work if I flashed android instead of running it off windows mobile?
Click to expand...
Click to collapse
short answer, no it needs to work in win mo first. back to the drawing board. first you need to unlock your phone with an unlocker, then you need to flash an official rom preferrably from your carrier that is GPS enabled, then you can run android and use GPS on it. many tuts around. if you did all of this already, you didn't do it right. also, some programs in win mo require GPS to be primed before working. make sure to use something like google maps to test in win mo.

I'm curious. What's so great about Android on the phone?
I'm using Windows Mobile 6.1 and the phone seems to run fine.
Are there clear cut advantages or is it just "something different"?

jimt007 said:
I'm curious. What's so great about Android on the phone?
I'm using Windows Mobile 6.1 and the phone seems to run fine.
Are there clear cut advantages or is it just "something different"?
Click to expand...
Click to collapse
to me the interface is superior, the apps, but mostly it's just something cool.
functionality wise I think you can achieve the same thing on Windows mobile with the right apps. Just the cool stuff like oooooo are not there on Winmo

jimt007 said:
I'm curious. What's so great about Android on the phone?
I'm using Windows Mobile 6.1 and the phone seems to run fine.
Are there clear cut advantages or is it just "something different"?
Click to expand...
Click to collapse
Run Android from your sd card via haret. Then you can have winmo and android.

im having issues, I have the original 512mb card in the phone formatted twice with fat32 partition. Copied the 6 files from your zip file and flashed the nbh file via the windows ruu flasher all was good. Boots with the linux penguin but I get to the state where it says losetup: /dev/block/loop0: No Such file or directory Failed
Failed to mount data fs on SD Card.
/bin/sh1 can't access ttyl job control turned off.
Then it just sits there.
Help, I'm playing around with this on my partially broken vogue (have my good one running winmo) so I can fool around with it but I've tried everything I could.
Thanks

Have try it on my Kaiser... I know for sure it will not work.. and indeed... loop between reset and the HTC logo

is this different than the one dzo made?

my mistake i made the zip file really quick last night i will redo it. Apparent i didnt rename datablank.img to data.img i will fix and reupload but all you have to do is make sure the file is data.img
The link in the first post has been updated to reflect this change. My apologies.

mush2699 said:
Apparent i didnt rename datablank.img to data.img
Click to expand...
Click to collapse
If that is only the difference then we can rename it itself if you already have the files.
Question: Can you also replace the system.sqsh with a build you like?
(When you know for sure it is working.. beside if GPS/Bluetooth is working.)
And in the ROM there is: zimage, initrd and haret.exe?
the flash will not work on a Kaiser have try the new ZIP file.

I flashed this rom and it was very nice, but when i tried to sync my google account, it force closed and my contacts never synced. Is there a fix to this?

Can someone also make a Flashable rom for KAISER ... thanks..

ludester said:
im having issues, I have the original 512mb card in the phone formatted twice with fat32 partition. Copied the 6 files from your zip file and flashed the nbh file via the windows ruu flasher all was good. Boots with the linux penguin but I get to the state where it says losetup: /dev/block/loop0: No Such file or directory Failed
Failed to mount data fs on SD Card.
/bin/sh1 can't access ttyl job control turned off.
Then it just sits there.
Help, I'm playing around with this on my partially broken vogue (have my good one running winmo) so I can fool around with it but I've tried everything I could.
Thanks
Click to expand...
Click to collapse
Try scanning the card for errors. Aslo note that the data file needs to be named data.img. Between those 2 ideas you problem should be solved.

Roms
Here is a whole bunch of them
not sure which ones work perfectly, i know a couple of them work for me.
go ahead and try em out.
i take no credit for these roms
http://www.mediafire.com/?sharekey=aa29b5ef55091cf1c79b87b207592a1cda1aeb409e8c06c379b5ba589d1986ba

Even running natively instead of haret i have noticed battery life really sucks and i'm just talking about standby mode. Using the same programs on android as winmo i get about a third of the battery life. Can anyone recommend any battery saving tip. GPS is on only when needed and data is always on. I will not turn data off as it is always on in winmo and i have no issues with winmo.

[Android] Tattoo and new rootfs

Okay, I finally cleaned up what I've been working on the past few weeks
New sqsh with tattoo senseui!
so this is senseui from the tattoo, so it runs at native resolution 240x320. I have not tested it at *any* other resolution.
I haven't done a lot of testing so I can't guarantee everything works... ie I think that bluetooth might be broken? who knows... other folks please post your experiences!
Please note: I *have* seen the whole thing crash due to WifiService dying on my vogue once... and I've also seen a hard lockup on the polaris once... not sure why or workaround, but it doesn't seem to be commonplace.
I use the tattoo.user.conf and I *don't* use rosie, and it runs nice and speedy... YMMV.
New rootfs that cleans up a *lot* of little things... you can now use the volume-down installer to *update* your nand partitions and back up your nand data! (you first have to have a the nand flash complete before this will work, and you need to use the rootfstonand with the updated rootfs)
Maybe I'll post some screenshots? who knows...
Everything is HERE
EDIT: Forgot the most important part... Credits!
This build is almost entirely from the Belgian HTC Click image posted somewhere out there. Lots of time was spent getting the RIL to talk to the phone application without crashes, but it seems somewhat stable now.
At my disposal I had donut and tattoo builds from enatefox, zenulator, plemen, and maybe a couple others.
Some bits needed to be swapped out to work, and that took the bulk of my time... oh well
I'll also give some creds to the folks over in kaiserland, but I'm not sure who (sorry).

Thanks muchly! Been beating my brains out trying to dyi a port of Tattoo and you've done all the hard work. Made my day, now I can go to sleep....

Trying this out tomorrow. I'll write about anything I see. Nice job.

Thanks Vilord
I'm a big fan of tattoo native resolution senseui.
testing.

lauyanyameric said:
it says:
No sys found on SD, booting Part/NAND
(e2fsck 1.41.4 (27-Jan-2009)
ext2fs_check_if_mount: No such file or directory while determining whether /dev/block/mmcblk0p3 is mounted.
/dev/block/mmcblk0p3: clean, 11/130560 files, 18794/522112 blocks
Using partitioned system
e2fsck 1.41.4 (27-Jan-2009)
/dev/block/mmcblk0p2 is mounted.
e2fsck: Cannot continue, aborting.
mount: Device or resource busy
Failed
Failed to mount /system
_
Click to expand...
Click to collapse
that is likely due to my new partition/nand management code...
What is your partition setup?
I'll poke at it in a few minutes

vilord said:
that is likely due to my new partition/nand management code...
What is your partition setup?
I'll poke at it in a few minutes
Click to expand...
Click to collapse
I don't know what could be causing the bootup issue
I dropped in some debugs and catchalls that might help

The faster!
This is the fastest version ever.
i'm using haret and no paritions, works perfect!
i wish i could put it on nand, but i'm using a NIKE and the NBH is for vogue...
NICE JOB VILORD!

Hi,.
Thanks vilord, this is the best build with sense that i have tried.
I have the mount system error the first time i try to boot it, the second time it boot without problem.
Im wrting this from this build

arleybarros: what is the state of android on NIKE at this point? Do you still have no vibrate?
all: I'm still not 100% sure why the installer's choking, but I'll poke it when I get home (I still need to partition the SD on my POLA200, so I should be able to see exactly what you see when I do it)

Sigh, more user freindly
I really don't mean to sound a negative note, your hard work , along with the other devs is sooo appreciated and admired. But for the many newbies that are out here, drooling other the new toys you guys are providing, I would really like to see complete bundles, which are updated as needed, with maybe a version number assigned to each updated build. Because of the modular nature of the OS, it is far to easy to to mismatch components resulting is a royal mess, and a real bad taste for potential users.
Or am I just full of it?

no you're completely right.
Once I get things ironed out with the installer, and after I've gotten some more feedback, I'll put it together with two zip downloads, one for NAND installation and one for haret/SD installation.

vilord said:
arleybarros: what is the state of android on NIKE at this point? Do you still have no vibrate?
Click to expand...
Click to collapse
Since the vibration was disabled (2009-09-22) all the builds works almost like vogue, except for:
Camera: never worked, maybe because the drivers are diferent or because nike camera max resolutuion is 2MP (force close)
Bluetooth: never worked, maybe drivers
Vibration: disabled
everythig else works perfect.

gjbnh said:
I really don't mean to sound a negative note, your hard work , along with the other devs is sooo appreciated and admired. But for the many newbies that are out here, drooling other the new toys you guys are providing, I would really like to see complete bundles, which are updated as needed, with maybe a version number assigned to each updated build. Because of the modular nature of the OS, it is far to easy to to mismatch components resulting is a royal mess, and a real bad taste for potential users.
Or am I just full of it?
Click to expand...
Click to collapse
I think this is a good idea too..thanks.
Im having trouble with data connection. it was one for a moment then stopped. Any suggestions?
Never mind I got it working. It was turned off in the settings. great build!

I'll make this nandable and post soon.

got it booted - without ext partitions
lauyanyameric said:
it says:
No sys found on SD, booting Part/NAND
(e2fsck 1.41.4 (27-Jan-2009)
ext2fs_check_if_mount: No such file or directory while determining whether /dev/block/mmcblk0p3 is mounted.
/dev/block/mmcblk0p3: clean, 11/130560 files, 18794/522112 blocks
Using partitioned system
e2fsck 1.41.4 (27-Jan-2009)
/dev/block/mmcblk0p2 is mounted.
e2fsck: Cannot continue, aborting.
mount: Device or resource busy
Failed
Failed to mount /system
_
Click to expand...
Click to collapse
I am really looking forward to this, but get the same result as lauyanyameric on my Kaiser, afterwards I am dropped to shell .... Anything I can do to help debug?
Tried it without partition, and I get data error and it created a 34 mb data.img.
Tried with a blank data.img (no partitions) and I was able to boot!
Grateful for your work! Thanks.

try formating your sd card again...

So far, so great.
Running via Haret and this is working superbly. Everything that should be working, is working.
So far have tested audio, data, GPS, camera (via Camera Pro), and apps such as Voice Search, Exchange Sync, Market and they all work and are quite responsive.
Noticed a few rosie reloads after using memory intensive apps, so I added a 32mb swap in the conf file. So far no more rosie reloads.
Also, the USB to PC app doesn't appear to like my work machine. Not sure if this is an issue with the desktop or the app.
Will be flashing to NAND after a bit more testing.
Thanks again Jesse!
Cheers
Nick

First off thanks for all the hard work you and others have done bringing android to the vogue. I have donut running off of nand right now and love it but am wanting to try this build but have no idea how to reflash it on there. i have tried searching and searching but i havent found a good answer on how to do it.

nabicat said:
So far, so great.
Running via Haret and this is working superbly. Everything that should be working, is working.
So far have tested audio, data, GPS, camera (via Camera Pro), and apps such as Voice Search, Exchange Sync, Market and they all work and are quite responsive.
Noticed a few rosie reloads after using memory intensive apps, so I added a 32mb swap in the conf file. So far no more rosie reloads.
Also, the USB to PC app doesn't appear to like my work machine. Not sure if this is an issue with the desktop or the app.
Will be flashing to NAND after a bit more testing.
Thanks again Jesse!
Cheers
Nick
Click to expand...
Click to collapse
Im getting the Rosie reloads too... how do you add the 32mb swap or better yet can you just upload your conf file? Thanks

vilord said:
no you're completely right.
Once I get things ironed out with the installer, and after I've gotten some more feedback, I'll put it together with two zip downloads, one for NAND installation and one for haret/SD installation.
Click to expand...
Click to collapse
Thank you I think doing this will add a layer of usability to the releases, and gain a greater community of users as a result. Personally I would rather have releases further apart in time with this kind of thing rather than a rush to try the newest toy.

Sick of THIS!

This isn't my post but I have very same problem and thought i'd bring it to this thread see if anyone happens to have same issue or has solution?
Hi guys,
I've been trying out different android builds but after a while it won't boot in android anymore.
I run the CLRAD and HaReT, it show the command lines and then freezes on the HTC screen.
It is not the first time I'm launching it, everything is allways set up the way I like it and then I want to reboot a final time and it freezes. (first boot only takes 10 min.) Then I have to take out the battery to reset, but everytime after it freezes, tried waiting for +1 hour but no changes.
When I delete all the android files from my SD card and copy the original ones it restarts again and I have to setup everything again.
I tried new wm roms (Miri HD2 wm6.5.x) different radios (now 2.12.50.02.2),
the new HSPL3 but nothing seems to solve this.
edit: now I'm trying to use the mdeejay froyo HD v3.7 rom
I've searched the forum and other users seem to have the same problem, but no solutions have come forward. The people replying allways seem to think it is the first boot that takes 10 min. but it's not that. First boot works fine.
Click to expand...
Click to collapse

What builds have you tried? What memory card are you using (class and size)?Did you format your memory card to FAT32? You could also try deleting app data folder on your storage card, as each time you use a build a bit of it may be left in this folder( it does no harm and will re-create itself straight after). Have you tried any android boot loaders e.g MSKIP android loader v5. No-one else had replied so thought id try and share what little knowledge i have. If you have been asked all this 20 times over, Sorry!

I am using 8gb mem card came with htc Fat32 (formated it using win and htc both)
Win build is dutty's com2 3.14 latest rom
Mdeejay 2.3 Revolution android version.
had jmz's bootloder
Tried everything u said nothing happened...
Trying now MSKIP's boot loader, with fresh installation lets see...
Ur effort time and help is always appreciated thanks Funkdat

maybe because OS's weren't designed to run on a SD card??? Sell your hd2 and get a galaxy s phone.

I feel your pain. Very very frustrating and you feel you have tried everything. Time consuming too.
What bothers me a bit with those builds is that they load up the HTC logo so actually don't see what is happening during bootup. I wonder if you couldn't bypass that?

that wud have been big help if i could see what is actually happening but the Big HTC Logo screen is hiding everything and i am just sick of it.
Well if i could only burn the ROM into HD2 that would have been much better so wouldn't have to worry about anything i have to format my storage card every time or either delete everything on the sd card to make it work duno which file is it causing this error but i hope some one will come up with solution...
CHeers

still the same tried everything...

Hi there,
You do understand that the HD2 was not made nor meant to run Android and that all the Android ROM's are third party ones and unofficial ?
You did not say whether or not you tried to install on the internal memory and not the card ?
Bye,
Itamar

supermaster said:
This isn't my post but I have very same problem and thought i'd bring it to this thread see if anyone happens to have same issue or has solution?
Click to expand...
Click to collapse
did you try starting it, deleting the data.img and starting it again?
nrfitchett4 said:
maybe because OS's weren't designed to run on a SD card??? Sell your hd2 and get a galaxy s phone.
Click to expand...
Click to collapse
Oh the contradiction. You say that, yet you use it too
"Android Playground: HyperDroid 1.6"
You gonna sell your HD2? (now for the crickets )

This might seem stupid, but have you tried deleting the Android folder from your SD card? Or modify this line in startup.txt:
set cmdline "rel_path=Android"
to
set cmdline "rel_path=/"
The problem might be that because of rel_path, it's looking for your android ROM in the "Android" folder. And some applications create that folder (Google goggle for example) to save information. I had an issue quite similar to yours. Now editing startup.txt is the first thing I do in a build. I currently have 5 different builds, one for every day of the week! haha.
Hope this helps!

rr5678 said:
did you try starting it, deleting the data.img and starting it again?
Oh the contradiction. You say that, yet you use it too
"Android Playground: HyperDroid 1.6"
You gonna sell your HD2? (now for the crickets )
Click to expand...
Click to collapse
not at all. I actually rarely boot into android and when I do, I keep my android builds on a seperate sd card. But I'm also not on here starting threads complaining that android won't boot properly on my winmo phone.
That's why its my playground. I am not trying to make android my daily driver.

karendar said:
This might seem stupid, but have you tried deleting the Android folder from your SD card? Or modify this line in startup.txt:
set cmdline "rel_path=Android"
to
set cmdline "rel_path=/"
The problem might be that because of rel_path, it's looking for your android ROM in the "Android" folder. And some applications create that folder (Google goggle for example) to save information. I had an issue quite similar to yours. Now editing startup.txt is the first thing I do in a build. I currently have 5 different builds, one for every day of the week! haha.
Hope this helps!
Click to expand...
Click to collapse
there's only 5 days in a week???

nrfitchett4 said:
not at all. I actually rarely boot into android and when I do, I keep my android builds on a seperate sd card. But I'm also not on here starting threads complaining that android won't boot properly on my winmo phone.
That's why its my playground. I am not trying to make android my daily driver.
Click to expand...
Click to collapse
Well that's true. Android isn't really that stable enough to run often - especially when I see that it sucks down 500mA of power. That leads to 2 hours of battery.
(speaking of separate SD cards, I still have to send my faulty 16GB back to HTC )