Related
MY PHONE DIED AFTER I FLUSH MY PHONE AFTER FLUSHING THIS BETA BUIL,THERE IS NO LIGHT AND I CANT CHARGE AND CANT TURN ON MY PHONE,,PLEASE HELP...
http://www.multiupload.com/1GEN8PQPMU
EDIT:wolla its working,found the solution here.just pulled out the battery 30 min and back..live on my hd2.
http://forum.xda-developers.com/showthread.php?t=596484&highlight=BRICK&page=31
I don't know how darkstone's name got into this thread, but football made it clear that you should not flash the ace build to your hd2. just re-flash the stock rom and your phone should be fine. hope this helps
The 4th line of his post said:
THIS ROM ONLY FOR COOKERS DO NOT TRY TO FLASH ON DEVICE!
I am not a dev .. let's hope they can help you. But it has been said endless number of times - first read, then read again, then several times more until every word is clear to you ... then try to flash ... on your own risk. Always.
ima take a guess and say you flashed a beta rom FOR the Desire HD on your HD2...incompatible ROM. your phone is bricked for good.
Learn to f**king read man. Im a newb and read that.
maybe not bricked for good, he shouuld be able to flash a ruu for his phone containing winmo and be good to go again, but who knows
I think he flashed a beta ROM darkstone made. It was just like any other Android build, made to launch from the sdcard. What happened exactly? You flashed it and it booted fine then just died?
yea who knows, it's nebulous. - Michael Scott
Take your battery and microsd card out and leave it for a few hours. Then plug in the battery but LEAVE THE SD CARD OUT and try booting up your phone into Windows.
Also how did you put those files on your phone since they are for the Storage Card. Did you try to copy them to your internal memory in some way?
You REALLY shouldnt try test versions unless you know what you are doing which im very sure you didnt..
Mark.
Wait... what?
OK, so you managed to get a hold of the files that I'm sharing with devs, and you somehow flash those files on to your phone (how is that even possible) ?
You must of flashed your phone using the EXE file on the first post of this thread right? If you did, then you should have not been so careless. Clearly on the first post it states that this is for developers only, this was not to be flashed.
Do not blame my files for something that you have done. Those files were not intended to be spread on this forum, however I have no problem if people do wish to post about it.
Time for you to call HTC and see if you can get a replacement...
he didnt release to the public for a reason I knew somebody was going to download it lmao
DarkStone1337 said:
Wait... what?
OK, so you managed to get a hold of the files that I'm sharing with devs, and you somehow flash those files on to your phone (how is that even possible) ?
You must of flashed your phone using the EXE file on the first post of this thread right?
Do not blame my files for something that you have done. Those files were not intended to be spread on this forum, however I have no problem if people do wish to post about it.
Time for you to call HTC and see if you can get a replacement...
Click to expand...
Click to collapse
Thats actually what i was wondering, how did he kill his phone flashing something from the SD card?
DarkStone1337 said:
Wait... what?
OK, so you managed to get a hold of the files that I'm sharing with devs, and you somehow flash those files on to your phone (how is that even possible) ?
You must of flashed your phone using the EXE file on the first post of this thread right?
Do not blame my files for something that you have done. Those files were not intended to be spread on this forum, however I have no problem if people do wish to post about it.
Time for you to call HTC and see if you can get a replacement...
Click to expand...
Click to collapse
There is a thread with a copy of your irc chat and a link to your test build. Do you want me to delete the link to the files?
Mark.
wait yea you're right. it's not a "flushable" ROM..i just downloaded the file and it's just another Android build that you put on the SD card. Not sure what the OP "flushed" but yeah, taking the SD card out and restarting the phone should do the trick. Am I missing something? Can you actually brick your phone booting android from Haret?
DarkStone1337 said:
Wait... what?
OK, so you managed to get a hold of the files that I'm sharing with devs, and you somehow flash those files on to your phone (how is that even possible) ?
You must of flashed your phone using the EXE file on the first post of this thread right? If you did, then you should have not been so careless. Clearly on the first post it states that this is for developers only, this was not to be flashed.
Do not blame my files for something that you have done. Those files were not intended to be spread on this forum, however I have no problem if people do wish to post about it.
Time for you to call HTC and see if you can get a replacement...
Click to expand...
Click to collapse
I was watching the conversation and when you posted it on linux-chat I knew somebody was going to do it....i swear lmao
mskip said:
There is a thread with a copy of your irc chat and a link to your test build. Do you want me to delete the link to the files?
Mark.
Click to expand...
Click to collapse
Nope it's fine
I don't mind links being posted, but people need to be careful with them.
There was a reason that I didn't post that link, the build was incomplete and still had issues.
Thanks though
malikadnanm said:
wait yea you're right. it's not a "flushable" ROM..i just downloaded the file and it's just another Android build that you put on the SD card. Not sure what the OP "flushed" but yeah, taking the SD card out and restarting the phone should do the trick. Am I missing something? Can you actually brick your phone booting android from Haret?
Click to expand...
Click to collapse
There is always a slight chance of messing Windows Mobile up but as long as you have HardSPL installed you can easily flash a new rom and get everything working again so nothing much to worry about.
Mark.
mskip said:
There is a thread with a copy of your irc chat and a link to your test build. Do you want me to delete the link to the files?
Mark.
Click to expand...
Click to collapse
It was I who put the link, without malice, thought it could be shared, i wrote clearly that it was a BETA BUILD for devs try.
If you want, i delete de post.
i just put the beta rom on my Sd card and pressed haret,then it stuck on bootlader,i taked off battery and on nothing happent.there is no light or nothing,i try to charge but nothing happens,no sync(sory for my engl.)
he said ace beta not just an android sd sh**t it said for cookers only
Dear Forum,
All evo roms out there dont work on my HTC HD2, I HAVE NO IDEA WHY!. It just gets stuck at "htc" screen for like literally, hours. (well, just 1.5 hrs). Am i doing anything wrong? Thanks again
-Bhalraam
Bhalraam said:
Dear Forum,
All evo roms out there dont work on my HTC HD2, I HAVE NO IDEA WHY!. It just gets stuck at "htc" screen for like literally, hours. (well, just 1.5 hrs). Am i doing anything wrong? Thanks again
-Bhalraam
Click to expand...
Click to collapse
Have you tried other non-sense build to see if they would work? What radio?
weird.. have you tried formating your card? and make sure u copy all the things that come with the download on there. which winMo rom u running? the radio i think it shouldnt matter. has to do with the sd card.. how much memory u have available?
Hated it anyway.. Always the wrong prefix before my numbers..
Sent from my Desire HD using XDA App
so we're supposed to magically know what happened to ur phone without any information about it?
oKKKAAAYyy. abra cadabra poof! throw ur phone on the floor and it should be fixed.
atekone said:
weird.. have you tried formating your card? and make sure u copy all the things that come with the download on there. which winMo rom u running? the radio i think it shouldnt matter. has to do with the sd card.. how much memory u have available?
Click to expand...
Click to collapse
actually the radio version does matter.. it has to be on at least 2.08 for android to run..
Hi Guys,
Kinda similar problem... Hopefully I can share more details.
Im using an Australian Telstra HD2 (T-mobile_leo) Energy.Leo.21916.Sense2.5.Oct.08 with radio 2.12.50.02
The droid build Im using is Mdeejay FroYo Z v.1.1|1.31.405.1|kernel: hastarin R7.5
Formatted, booted, installed some stuff, rebooted again and all seemed well.
But I use phone as a storage device (and have done it before with no issues) then tnings seem to go to poo hell.
OS gets slow and on restart, the launch stalls on the HTC screen and will not progress any further.
Really enjoy the android builds and this is the 2nd build that has done this on my phone.
Any ideas on what I can do to recover?
For the ones having problems on getting stuck on HTC boot image with mdeejay roms, try downloading a data.img from here http://www.multiupload.com/GZ1JUZBYJI and copy it in the /sdcard/android/
( inside android folder ). It should take around 2 minutes to boot after that.
Also try to use a 2.10 or 2.12 radio.
copied the file into the android folder (which was supiciously empty) and pulled the battery 10 min later.
Have I got the right folder or do I need to replace the 1GB .img in the root?
Make sure that inside that folder you have every file found in the .zip folder downloaded from any of the builds threads. ( there should be 10-11 folders+files)
You can either replace it or try and find a 1gb data.img file from here http://www.multiupload.com/BJ2FXF9IRM ( just to make sure ), maybe you already have the right file, but I dont know that
I tested both sizes 512Mb and 1 Gb and both worked ok.
Thanks for the help Viperd.
I bit the bullet this time and reformatted (just because I needed a phone and gps ) but I have grabbed the image files and a quick script to check the files on the card the next time this happens
This isn't my post but I have very same problem and thought i'd bring it to this thread see if anyone happens to have same issue or has solution?
Hi guys,
I've been trying out different android builds but after a while it won't boot in android anymore.
I run the CLRAD and HaReT, it show the command lines and then freezes on the HTC screen.
It is not the first time I'm launching it, everything is allways set up the way I like it and then I want to reboot a final time and it freezes. (first boot only takes 10 min.) Then I have to take out the battery to reset, but everytime after it freezes, tried waiting for +1 hour but no changes.
When I delete all the android files from my SD card and copy the original ones it restarts again and I have to setup everything again.
I tried new wm roms (Miri HD2 wm6.5.x) different radios (now 2.12.50.02.2),
the new HSPL3 but nothing seems to solve this.
edit: now I'm trying to use the mdeejay froyo HD v3.7 rom
I've searched the forum and other users seem to have the same problem, but no solutions have come forward. The people replying allways seem to think it is the first boot that takes 10 min. but it's not that. First boot works fine.
Click to expand...
Click to collapse
What builds have you tried? What memory card are you using (class and size)?Did you format your memory card to FAT32? You could also try deleting app data folder on your storage card, as each time you use a build a bit of it may be left in this folder( it does no harm and will re-create itself straight after). Have you tried any android boot loaders e.g MSKIP android loader v5. No-one else had replied so thought id try and share what little knowledge i have. If you have been asked all this 20 times over, Sorry!
I am using 8gb mem card came with htc Fat32 (formated it using win and htc both)
Win build is dutty's com2 3.14 latest rom
Mdeejay 2.3 Revolution android version.
had jmz's bootloder
Tried everything u said nothing happened...
Trying now MSKIP's boot loader, with fresh installation lets see...
Ur effort time and help is always appreciated thanks Funkdat
maybe because OS's weren't designed to run on a SD card??? Sell your hd2 and get a galaxy s phone.
I feel your pain. Very very frustrating and you feel you have tried everything. Time consuming too.
What bothers me a bit with those builds is that they load up the HTC logo so actually don't see what is happening during bootup. I wonder if you couldn't bypass that?
that wud have been big help if i could see what is actually happening but the Big HTC Logo screen is hiding everything and i am just sick of it.
Well if i could only burn the ROM into HD2 that would have been much better so wouldn't have to worry about anything i have to format my storage card every time or either delete everything on the sd card to make it work duno which file is it causing this error but i hope some one will come up with solution...
CHeers
still the same tried everything...
Hi there,
You do understand that the HD2 was not made nor meant to run Android and that all the Android ROM's are third party ones and unofficial ?
You did not say whether or not you tried to install on the internal memory and not the card ?
Bye,
Itamar
supermaster said:
This isn't my post but I have very same problem and thought i'd bring it to this thread see if anyone happens to have same issue or has solution?
Click to expand...
Click to collapse
did you try starting it, deleting the data.img and starting it again?
nrfitchett4 said:
maybe because OS's weren't designed to run on a SD card??? Sell your hd2 and get a galaxy s phone.
Click to expand...
Click to collapse
Oh the contradiction. You say that, yet you use it too
"Android Playground: HyperDroid 1.6"
You gonna sell your HD2? (now for the crickets )
This might seem stupid, but have you tried deleting the Android folder from your SD card? Or modify this line in startup.txt:
set cmdline "rel_path=Android"
to
set cmdline "rel_path=/"
The problem might be that because of rel_path, it's looking for your android ROM in the "Android" folder. And some applications create that folder (Google goggle for example) to save information. I had an issue quite similar to yours. Now editing startup.txt is the first thing I do in a build. I currently have 5 different builds, one for every day of the week! haha.
Hope this helps!
rr5678 said:
did you try starting it, deleting the data.img and starting it again?
Oh the contradiction. You say that, yet you use it too
"Android Playground: HyperDroid 1.6"
You gonna sell your HD2? (now for the crickets )
Click to expand...
Click to collapse
not at all. I actually rarely boot into android and when I do, I keep my android builds on a seperate sd card. But I'm also not on here starting threads complaining that android won't boot properly on my winmo phone.
That's why its my playground. I am not trying to make android my daily driver.
karendar said:
This might seem stupid, but have you tried deleting the Android folder from your SD card? Or modify this line in startup.txt:
set cmdline "rel_path=Android"
to
set cmdline "rel_path=/"
The problem might be that because of rel_path, it's looking for your android ROM in the "Android" folder. And some applications create that folder (Google goggle for example) to save information. I had an issue quite similar to yours. Now editing startup.txt is the first thing I do in a build. I currently have 5 different builds, one for every day of the week! haha.
Hope this helps!
Click to expand...
Click to collapse
there's only 5 days in a week???
nrfitchett4 said:
not at all. I actually rarely boot into android and when I do, I keep my android builds on a seperate sd card. But I'm also not on here starting threads complaining that android won't boot properly on my winmo phone.
That's why its my playground. I am not trying to make android my daily driver.
Click to expand...
Click to collapse
Well that's true. Android isn't really that stable enough to run often - especially when I see that it sucks down 500mA of power. That leads to 2 hours of battery.
(speaking of separate SD cards, I still have to send my faulty 16GB back to HTC )
So I've tried to install android build. I had stock rom 3.14.479.2 and I've tried to install HD2Froyo_V3. I've followed the instruction and after running haret few lines of text showed and than nothing, htc display appeared and stayed that way until I've removed the battery. Then I've read that I have to flash a coked Rom in order to install build for android so I downgraded it to 1.48 so I can install HSPL (not sure that it was necessary). I've flashed Energy.Leo.21916.Sense2.5.Cookie.Nov.02 with Radio_2_12_50_02_2 and copied Android folder again, same result. After flashing between stock Rom and Energy.Leo.21916.Sense2.5.Cookie.Nov.02 million of times I'm out of options. The same problem I had with FroyoStone_Sense_V3.2 too. It seemed so easy when I saw it on youtube and I can not believe that I had so bad luck. What I've done wrong? What should I do?
Anyone help?
One word: wait!
the kernel usually creates a 1GB storage for android. This will need some minutes (can take up to 10 minutes on class 2)
Some words for ROMs. Nearly all ROMs will work (the 2.14 ROMs don't) as long as you have a new radio. use 2.10 or higher. some have robo voice problems when calling. if you experience robo try another Radio.
(you should post questions like that in android development discussion. this subforum is for development only)
The folder-name of your rom, what is it and did you change it? You have to change a value in startup.txt aswell if it is different from 'Android'.
Ultimaex is right. Creating a 1gb storage for android will take some time, be patient. I have a 2gb storage which took about 20 minutes from start to finish.
fyi, my setup is tmous stock rom 3.14 and tytung's NexusHD2-FRG83 Froyo 2.2.1 build.
Mr_Q said:
The folder-name of your rom, what is it and did you change it? You have to change a value in startup.txt aswell if it is different from 'Android'.
Click to expand...
Click to collapse
It is Android. And I've been waiting more than 15 minutes and nothing changes, only black screen with HTC on it...
mila1909 said:
It is Android. And I've been waiting more than 15 minutes and nothing changes, only black screen with HTC on it...
Click to expand...
Click to collapse
Ive had this happen to me when I was switching builds. I deleted everything on my sd card that was related to android. Usually, the folders that android makes on your sd card are all lowercase letters. The folders are start with a capital letter are Windows Mobile specific folders. So delete all those folders, dont forget to show hidden files just to make sure you get all the folders. Afterwards, with whatever build you plan on using, its probably best to re-download that build just to make sure no files were edited and copy them to your sd card.
Basically just start with a clean slate and you should be good to go.
i had the same problem just reformat ure memory card on ure htc hd2
I formated the sd every time I tried. It's not that
Same
I got the same problem I have tried everything waited more dan 20 minutes. Formatted 25 times. Iam searching all forums to find something
Ok, I have mentioned this a couple of times and it seems to fix this issue, format the SD card within windows (a full format not a quick one) and ensure that you format it to clusters that are 32kb.
Also what radio are you both using?
I use 2.15.50.14 now, bit tried with every radio over 2.8
fig_jam_uk said:
Ok, I have mentioned this a couple of times and it seems to fix this issue, format the SD card within windows (a full format not a quick one) and ensure that you format it to clusters that are 32kb.
Also what radio are you both using?
Click to expand...
Click to collapse
Iam now trieying what you said. I let u know about it.
I use radio 12.50
nope, again not working...I am desperate
mila1909 said:
nope, again not working...I am desperate
Click to expand...
Click to collapse
Same format didnt help, iam now gonna try other kernels.
well finally works!!! I instaled hspl3 and energy rom and tried with mattcleofroyo1.8 and it happend ...I don't know if it works with another build but this one is good, no problems till now
mila1909 said:
well finally works!!! I instaled hspl3 and energy rom and tried with mattcleofroyo1.8 and it happend ...I don't know if it works with another build but this one is good, no problems till now
Click to expand...
Click to collapse
I got energy rom 2 and hspl3 gonna try that android build i let you know if it works. try to use the zImage from mattcleofroyo with another build.
That build didnt work for me after jumping kernel my leds flashed an i got whit streak.
coolgut said:
That build didnt work for me after jumping kernel my leds flashed an i got whit streak.
Click to expand...
Click to collapse
That's normal at the first boot, he wrote it in his thread.. Was the same for my phone, just let it doin' his thing it will finish after about 10min.
And what I wanted to say, I think mattc 1.8 is one of the best Sense builds out there.. Works so damm' smooth. Old but gold
Yes I agree. I've tried several after this one and got back on mattc...There are few problems but I hope that will be fixed in other versions....
coolgut said:
That build didnt work for me after jumping kernel my leds flashed an i got whit streak.
Click to expand...
Click to collapse
You mean you got all kinds of distorted graphics all over the screen. Black and white stripes kind of thing? If so, that's because you probably replaced zImage but didn't replace initrd.gz. Regardless, if you leave it on the screwed up black/white screen, it should load within 10-15 min.
Hey,
Til now i have tried 12 Android 2.2 Builds. But only Hyperdroid 1.7 worked. But i like shubcract and all the other builds more. Everytime I used the correct Installation ways but 11 builds ended at a green HTC Logo. Thats sad
Can you help me? That would be great.
Oh, and i also tried 6 different custom roms. With hyperdroid I use the new Energy Rom. Thanks
Reltih2200 said:
Hey,
Til now i have tried 12 Android 2.2 Builds. But only Hyperdroid 1.7 worked. But i like shubcract and all the other builds more. Everytime I used the correct Installation ways but 11 builds ended at a green HTC Logo. Thats sad
Can you help me? That would be great.
Oh, and i also tried 6 different custom roms. With hyperdroid I use the new Energy Rom. Thanks
Click to expand...
Click to collapse
You might want to reformat your micro SD card to FAT32 and do a complete install from scratch. My combo has served me well with no issues.
That's what I have done, too.
Aww, it looks like there is no way out :/
Your card may be faulty.
Even when ONE build works every time? Is that possible.
I used an 2GB one and an 1GB one (stupid idea, i know ).
Now I am waiting for my new 8GB one, I'll try it with that, but I can't believe that this could be the problem.
But maybe you are right, thanks for your answer
Reltih2200 said:
Hey,
Til now i have tried 12 Android 2.2 Builds. But only Hyperdroid 1.7 worked. But i like shubcract and all the other builds more. Everytime I used the correct Installation ways but 11 builds ended at a green HTC Logo. Thats sad
Can you help me? That would be great.
Oh, and i also tried 6 different custom roms. With hyperdroid I use the new Energy Rom. Thanks
Click to expand...
Click to collapse
Have you checked startup.txt?
What do I have to check there?
Some builds do take time to load.
Do you have a "loader" to automatically load droid or do you do it through selection of "clrd" and "haret"?
Are you installing the complete build folder?
I tried it with ,,LaunchAndroid'' on the Energy Rom (thats what works perfectly with HyperDroid) and on the other tested Roms, I used the casual method. Even this method worked with HyperDroid really well!
Everytime, I saw the green HTC Logo, I waited over one hour and nothing happens.
Then I gave up.
On HyperDroid, I see the Linux-Penguin and it goes through a black field with white commands on it and then it starts.
When I start all the other builds, I see the black field with the white commands for one second, then the green Logo appears!
To your last question:
I throw the folder on the root of my sdcard and that was it.
That's how it works as hyperdroid 1.7
Or is there another thing for the other builds, which I have to do?
Reltih2200 said:
What do I have to check there?
Click to expand...
Click to collapse
You have to check that rel_path directs to the folder where Android is stored. Some builds are stored in folders named after the builds, whilst others are stored in the default 'Android' folder. If rel_path isn't linked correctly, you will not boot.
This could explain why only Hyperdroid works.
And also, as mentioned by others, wait 20-30 minutes on first boot, it may take a while to create your data.img
This seems to be the reason for it. I didn't tested it yet, but I took a look into the builds folder.
On HyperDroid it looks like this:
set cmdline "rel_path=HyperDroidV1.7"
And on Moto234 EVO v0.3 it looks like this:
set cmdline "rel_path=Android nand_boot=0"
Do I have to change something there?
I see that for HyperDroid, there is no Android Folder, only the folder ,,HyperDroidV1.7''. Thats what the cmdline says, too.
Do I have to change the Moto234 startup.txt-cmdline into
set cmdline "rel_path=Moto234_EVO_Black&Blue_V0.3"
In fact, THERE IS an Android-Folder. For HyperDroid, i put the files directly on the root, not in an android folder. When I take the files out of the Android Folder (for example the Moto234 build) and put it directly to the root of the sd card and I edit the startup.txt like, is it possible, that everything works fine?
I will try it and when it works, I am so happy
Reltih2200 said:
This seems to be the reason for it. I didn't tested it yet, but I took a look into the builds folder.
On HyperDroid it looks like this:
set cmdline "rel_path=HyperDroidV1.7"
And on Moto234 EVO v0.3 it looks like this:
set cmdline "rel_path=Android nand_boot=0"
Do I have to change something there?
I see that for HyperDroid, there is no Android Folder, only the folder ,,HyperDroidV1.7''. Thats what the cmdline says, too.
Do I have to change the Moto234 startup.txt-cmdline into
set cmdline "rel_path=Moto234_EVO_Black&Blue_V0.3"
In fact, THERE IS an Android-Folder. For HyperDroid, i put the files directly on the root, not in an android folder. When I take the files out of the Android Folder (for example the Moto234 build) and put it directly to the root of the sd card and I edit the startup.txt like, is it possible, that everything works fine?
I will try it and when it works, I am so happy
Click to expand...
Click to collapse
First of all, make sure Android is installed in 1 folder on root, and not in a subfolder of that folder. This means that the files should all be put in, for example, H:\Android\ or /sdcard/Android/, and not for example H:\Moto234blablabla\Android\, that's one folder too much (well actually I'm not sure this is - it probably isn't - a requirement, but do it anyways).
Then just change rel_path to the exact spot your startup.txt, or haret and clrcad for that matter, are located. For example: rel_path=Android , or rel_path="Moto234blabla".
Simples, see?
Edit: in case I'm not being very clear: of course don't change the folder structure inside of the Android folder. Files in for example /root/ or /data/ should remain where they are, obviously.
Yeah, but when it is, how you explain it to me, HyperDroid shouldn't work.
As I said, it is this:
set cmdline "rel_path=HyperDroidV1.7"
But the files of Hyperdroid I directly on the sd card, there is no folder or subfolder.
That means, the files are on H: and nothing more.
So, why does it work? I will test it at weekend, because when I have to start all over again with HyperDroid, after nothing worked, it takes to much time.
Maybe it works
Reltih2200 said:
Yeah, but when it is, how you explain it to me, HyperDroid shouldn't work.
As I said, it is this:
set cmdline "rel_path=HyperDroidV1.7"
But the files of Hyperdroid I directly on the sd card, there is no folder or subfolder.
That means, the files are on H: and nothing more.
So, why does it work? I will test it at weekend, because when I have to start all over again with HyperDroid, after nothing worked, it takes to much time.
Maybe it works
Click to expand...
Click to collapse
Do a usb link and check the "Hyper" folder to see if there is another "Hyper" sub folder, this may be the problem. Sometimes one creates a folder and then places the build in that folder which it automatically creates its own.
If there is an "Android" folder, check that as well and make sure there isn't a sub "Hyper" folder; when you open either folders it should open a list consisting of "root" folder, zimg, etc.
So, I did everything mentioned here.
And...nothing works. ONLY HyperDroid 1.7
I mean, that couldn't be. I did everything, i changed the startup.txt, again I used thousand different ROM's. It sucks :/
I am glad to see, that you tried to help me, but it seems to be useless.
I have no idea what to do. Maybe it's better to sell the HD2 and buy a Dell Streak or a Desire HD. Then I have no problems like this.
When you have a nother possible reason for this phenomenon, tell it to me. Maybe this one works
Format your SD card and try again (do a full format, not the default quick one), maybe that'll solve it.
Does not help, sorry
EDIT: For anyone, who wants to know...i finally solved the problem.
I mean, I am so happy, I could cry
And everything because of the user ,,shekerdothis''. He is just a god. He saved my life
So, he said in another post:
I had the same issue for about a day, and after research of stuck on green HTC Logo with no help, and thousands of post later I came acroos an article regarding EncFiltLog.menc. Do not format your SD card with MAC or windows PC, but rather the secret is to format your SD card with your winmo phone by going to "settings" | "format SD card". It will create an exec file "EncFiltLog.menc" This file is, I guess, a partition index??? The file "EncFiltLog.menc" is hidden in windows mobile 6.x but is visible when you mount your SD card to your PC. Do not delete this file!!!!
After that just drop your android folder and it will boot up in less than 3 mins. After that, u may add all your other files. I use a 16GB card with Android and all my music and stuff with no problems. Hope this helps you.
Click to expand...
Click to collapse
And yeah, it worked. I went to settings in Winmo, then to System and then format SD Card. It took 1 Second (even faster then the quick Format on my PC) and everything works brilliant!
Thanks to you all, what a great Forum
Reltih2200 said:
Does not help, sorry
EDIT: For anyone, who wants to know...i finally solved the problem.
I mean, I am so happy, I could cry
And everything because of the user ,,shekerdothis''. He is just a god. He saved my life
So, he said in another post:
And yeah, it worked. I went to settings in Winmo, then to System and then format SD Card. It took 1 Second (even faster then the quick Format on my PC) and everything works brilliant!
Thanks to you all, what a great Forum
Click to expand...
Click to collapse
Am I missing something? I don't have a Format SD Card option under Settings on WM
Ok soooo only hyper droid works and other build dont
well play around with the kernel in Hyperdroid and mess with the data IMG ,
voila
then even hyper droid wont work,,,,,
Sorry mate , just kidding,
your issue seems to be with startup txt,
best regds
xnifex said:
Am I missing something? I don't have a Format SD Card option under Settings on WM
Click to expand...
Click to collapse
I don't know!? I have the newest energy rom and on basic Windows Mobile 6.5, you also can find this option. Use the newest energy rom, go to Settings and then to system. There you can find KeyLock-Settings,Device Information,Format SD-Card,Remove Programs,Memory,Screen,External GPS,aGPS Settings,G-Sensor, Certificates, About,Uploader,Wipe,Power etc.
Ok soooo only hyper droid works and other build dont
well play around with the kernel in Hyperdroid and mess with the data IMG ,
voila
then even hyper droid wont work,,,,,
Sorry mate , just kidding,
your issue seems to be with startup txt,
best regds
Click to expand...
Click to collapse
Yeah, as I said, it has nothing to do with the startup.txt. I solved the problem with the method, explained in another Thread. Now I tried 11 Builds (MDJ has the best ) and everyone works.
It's a mistery to me, why hyperdroid worked without to format the sd card via winmo, but who cares? Everything works fine, and thats awesome )