[Q] HELP!! EVO SENSE cannot run on HTC HD2 - HD2 Android Q&A, Help & Troubleshooting and Genera

Dear Forum,
All evo roms out there dont work on my HTC HD2, I HAVE NO IDEA WHY!. It just gets stuck at "htc" screen for like literally, hours. (well, just 1.5 hrs). Am i doing anything wrong? Thanks again
-Bhalraam

Bhalraam said:
Dear Forum,
All evo roms out there dont work on my HTC HD2, I HAVE NO IDEA WHY!. It just gets stuck at "htc" screen for like literally, hours. (well, just 1.5 hrs). Am i doing anything wrong? Thanks again
-Bhalraam
Click to expand...
Click to collapse
Have you tried other non-sense build to see if they would work? What radio?

weird.. have you tried formating your card? and make sure u copy all the things that come with the download on there. which winMo rom u running? the radio i think it shouldnt matter. has to do with the sd card.. how much memory u have available?

Hated it anyway.. Always the wrong prefix before my numbers..
Sent from my Desire HD using XDA App

so we're supposed to magically know what happened to ur phone without any information about it?
oKKKAAAYyy. abra cadabra poof! throw ur phone on the floor and it should be fixed.

atekone said:
weird.. have you tried formating your card? and make sure u copy all the things that come with the download on there. which winMo rom u running? the radio i think it shouldnt matter. has to do with the sd card.. how much memory u have available?
Click to expand...
Click to collapse
actually the radio version does matter.. it has to be on at least 2.08 for android to run..

Hi Guys,
Kinda similar problem... Hopefully I can share more details.
Im using an Australian Telstra HD2 (T-mobile_leo) Energy.Leo.21916.Sense2.5.Oct.08 with radio 2.12.50.02
The droid build Im using is Mdeejay FroYo Z v.1.1|1.31.405.1|kernel: hastarin R7.5
Formatted, booted, installed some stuff, rebooted again and all seemed well.
But I use phone as a storage device (and have done it before with no issues) then tnings seem to go to poo hell.
OS gets slow and on restart, the launch stalls on the HTC screen and will not progress any further.
Really enjoy the android builds and this is the 2nd build that has done this on my phone.
Any ideas on what I can do to recover?

For the ones having problems on getting stuck on HTC boot image with mdeejay roms, try downloading a data.img from here http://www.multiupload.com/GZ1JUZBYJI and copy it in the /sdcard/android/
( inside android folder ). It should take around 2 minutes to boot after that.
Also try to use a 2.10 or 2.12 radio.

copied the file into the android folder (which was supiciously empty) and pulled the battery 10 min later.
Have I got the right folder or do I need to replace the 1GB .img in the root?

Make sure that inside that folder you have every file found in the .zip folder downloaded from any of the builds threads. ( there should be 10-11 folders+files)
You can either replace it or try and find a 1gb data.img file from here http://www.multiupload.com/BJ2FXF9IRM ( just to make sure ), maybe you already have the right file, but I dont know that
I tested both sizes 512Mb and 1 Gb and both worked ok.

Thanks for the help Viperd.
I bit the bullet this time and reformatted (just because I needed a phone and gps ) but I have grabbed the image files and a quick script to check the files on the card the next time this happens

Related

Sick of THIS!

This isn't my post but I have very same problem and thought i'd bring it to this thread see if anyone happens to have same issue or has solution?
Hi guys,
I've been trying out different android builds but after a while it won't boot in android anymore.
I run the CLRAD and HaReT, it show the command lines and then freezes on the HTC screen.
It is not the first time I'm launching it, everything is allways set up the way I like it and then I want to reboot a final time and it freezes. (first boot only takes 10 min.) Then I have to take out the battery to reset, but everytime after it freezes, tried waiting for +1 hour but no changes.
When I delete all the android files from my SD card and copy the original ones it restarts again and I have to setup everything again.
I tried new wm roms (Miri HD2 wm6.5.x) different radios (now 2.12.50.02.2),
the new HSPL3 but nothing seems to solve this.
edit: now I'm trying to use the mdeejay froyo HD v3.7 rom
I've searched the forum and other users seem to have the same problem, but no solutions have come forward. The people replying allways seem to think it is the first boot that takes 10 min. but it's not that. First boot works fine.
Click to expand...
Click to collapse
What builds have you tried? What memory card are you using (class and size)?Did you format your memory card to FAT32? You could also try deleting app data folder on your storage card, as each time you use a build a bit of it may be left in this folder( it does no harm and will re-create itself straight after). Have you tried any android boot loaders e.g MSKIP android loader v5. No-one else had replied so thought id try and share what little knowledge i have. If you have been asked all this 20 times over, Sorry!
I am using 8gb mem card came with htc Fat32 (formated it using win and htc both)
Win build is dutty's com2 3.14 latest rom
Mdeejay 2.3 Revolution android version.
had jmz's bootloder
Tried everything u said nothing happened...
Trying now MSKIP's boot loader, with fresh installation lets see...
Ur effort time and help is always appreciated thanks Funkdat
maybe because OS's weren't designed to run on a SD card??? Sell your hd2 and get a galaxy s phone.
I feel your pain. Very very frustrating and you feel you have tried everything. Time consuming too.
What bothers me a bit with those builds is that they load up the HTC logo so actually don't see what is happening during bootup. I wonder if you couldn't bypass that?
that wud have been big help if i could see what is actually happening but the Big HTC Logo screen is hiding everything and i am just sick of it.
Well if i could only burn the ROM into HD2 that would have been much better so wouldn't have to worry about anything i have to format my storage card every time or either delete everything on the sd card to make it work duno which file is it causing this error but i hope some one will come up with solution...
CHeers
still the same tried everything...
Hi there,
You do understand that the HD2 was not made nor meant to run Android and that all the Android ROM's are third party ones and unofficial ?
You did not say whether or not you tried to install on the internal memory and not the card ?
Bye,
Itamar
supermaster said:
This isn't my post but I have very same problem and thought i'd bring it to this thread see if anyone happens to have same issue or has solution?
Click to expand...
Click to collapse
did you try starting it, deleting the data.img and starting it again?
nrfitchett4 said:
maybe because OS's weren't designed to run on a SD card??? Sell your hd2 and get a galaxy s phone.
Click to expand...
Click to collapse
Oh the contradiction. You say that, yet you use it too
"Android Playground: HyperDroid 1.6"
You gonna sell your HD2? (now for the crickets )
This might seem stupid, but have you tried deleting the Android folder from your SD card? Or modify this line in startup.txt:
set cmdline "rel_path=Android"
to
set cmdline "rel_path=/"
The problem might be that because of rel_path, it's looking for your android ROM in the "Android" folder. And some applications create that folder (Google goggle for example) to save information. I had an issue quite similar to yours. Now editing startup.txt is the first thing I do in a build. I currently have 5 different builds, one for every day of the week! haha.
Hope this helps!
rr5678 said:
did you try starting it, deleting the data.img and starting it again?
Oh the contradiction. You say that, yet you use it too
"Android Playground: HyperDroid 1.6"
You gonna sell your HD2? (now for the crickets )
Click to expand...
Click to collapse
not at all. I actually rarely boot into android and when I do, I keep my android builds on a seperate sd card. But I'm also not on here starting threads complaining that android won't boot properly on my winmo phone.
That's why its my playground. I am not trying to make android my daily driver.
karendar said:
This might seem stupid, but have you tried deleting the Android folder from your SD card? Or modify this line in startup.txt:
set cmdline "rel_path=Android"
to
set cmdline "rel_path=/"
The problem might be that because of rel_path, it's looking for your android ROM in the "Android" folder. And some applications create that folder (Google goggle for example) to save information. I had an issue quite similar to yours. Now editing startup.txt is the first thing I do in a build. I currently have 5 different builds, one for every day of the week! haha.
Hope this helps!
Click to expand...
Click to collapse
there's only 5 days in a week???
nrfitchett4 said:
not at all. I actually rarely boot into android and when I do, I keep my android builds on a seperate sd card. But I'm also not on here starting threads complaining that android won't boot properly on my winmo phone.
That's why its my playground. I am not trying to make android my daily driver.
Click to expand...
Click to collapse
Well that's true. Android isn't really that stable enough to run often - especially when I see that it sucks down 500mA of power. That leads to 2 hours of battery.
(speaking of separate SD cards, I still have to send my faulty 16GB back to HTC )

Stuck on HTC please help!!!

So I've tried to install android build. I had stock rom 3.14.479.2 and I've tried to install HD2Froyo_V3. I've followed the instruction and after running haret few lines of text showed and than nothing, htc display appeared and stayed that way until I've removed the battery. Then I've read that I have to flash a coked Rom in order to install build for android so I downgraded it to 1.48 so I can install HSPL (not sure that it was necessary). I've flashed Energy.Leo.21916.Sense2.5.Cookie.Nov.02 with Radio_2_12_50_02_2 and copied Android folder again, same result. After flashing between stock Rom and Energy.Leo.21916.Sense2.5.Cookie.Nov.02 million of times I'm out of options. The same problem I had with FroyoStone_Sense_V3.2 too. It seemed so easy when I saw it on youtube and I can not believe that I had so bad luck. What I've done wrong? What should I do?
Anyone help?
One word: wait!
the kernel usually creates a 1GB storage for android. This will need some minutes (can take up to 10 minutes on class 2)
Some words for ROMs. Nearly all ROMs will work (the 2.14 ROMs don't) as long as you have a new radio. use 2.10 or higher. some have robo voice problems when calling. if you experience robo try another Radio.
(you should post questions like that in android development discussion. this subforum is for development only)
The folder-name of your rom, what is it and did you change it? You have to change a value in startup.txt aswell if it is different from 'Android'.
Ultimaex is right. Creating a 1gb storage for android will take some time, be patient. I have a 2gb storage which took about 20 minutes from start to finish.
fyi, my setup is tmous stock rom 3.14 and tytung's NexusHD2-FRG83 Froyo 2.2.1 build.
Mr_Q said:
The folder-name of your rom, what is it and did you change it? You have to change a value in startup.txt aswell if it is different from 'Android'.
Click to expand...
Click to collapse
It is Android. And I've been waiting more than 15 minutes and nothing changes, only black screen with HTC on it...
mila1909 said:
It is Android. And I've been waiting more than 15 minutes and nothing changes, only black screen with HTC on it...
Click to expand...
Click to collapse
Ive had this happen to me when I was switching builds. I deleted everything on my sd card that was related to android. Usually, the folders that android makes on your sd card are all lowercase letters. The folders are start with a capital letter are Windows Mobile specific folders. So delete all those folders, dont forget to show hidden files just to make sure you get all the folders. Afterwards, with whatever build you plan on using, its probably best to re-download that build just to make sure no files were edited and copy them to your sd card.
Basically just start with a clean slate and you should be good to go.
i had the same problem just reformat ure memory card on ure htc hd2
I formated the sd every time I tried. It's not that
Same
I got the same problem I have tried everything waited more dan 20 minutes. Formatted 25 times. Iam searching all forums to find something
Ok, I have mentioned this a couple of times and it seems to fix this issue, format the SD card within windows (a full format not a quick one) and ensure that you format it to clusters that are 32kb.
Also what radio are you both using?
I use 2.15.50.14 now, bit tried with every radio over 2.8
fig_jam_uk said:
Ok, I have mentioned this a couple of times and it seems to fix this issue, format the SD card within windows (a full format not a quick one) and ensure that you format it to clusters that are 32kb.
Also what radio are you both using?
Click to expand...
Click to collapse
Iam now trieying what you said. I let u know about it.
I use radio 12.50
nope, again not working...I am desperate
mila1909 said:
nope, again not working...I am desperate
Click to expand...
Click to collapse
Same format didnt help, iam now gonna try other kernels.
well finally works!!! I instaled hspl3 and energy rom and tried with mattcleofroyo1.8 and it happend ...I don't know if it works with another build but this one is good, no problems till now
mila1909 said:
well finally works!!! I instaled hspl3 and energy rom and tried with mattcleofroyo1.8 and it happend ...I don't know if it works with another build but this one is good, no problems till now
Click to expand...
Click to collapse
I got energy rom 2 and hspl3 gonna try that android build i let you know if it works. try to use the zImage from mattcleofroyo with another build.
That build didnt work for me after jumping kernel my leds flashed an i got whit streak.
coolgut said:
That build didnt work for me after jumping kernel my leds flashed an i got whit streak.
Click to expand...
Click to collapse
That's normal at the first boot, he wrote it in his thread.. Was the same for my phone, just let it doin' his thing it will finish after about 10min.
And what I wanted to say, I think mattc 1.8 is one of the best Sense builds out there.. Works so damm' smooth. Old but gold
Yes I agree. I've tried several after this one and got back on mattc...There are few problems but I hope that will be fixed in other versions....
coolgut said:
That build didnt work for me after jumping kernel my leds flashed an i got whit streak.
Click to expand...
Click to collapse
You mean you got all kinds of distorted graphics all over the screen. Black and white stripes kind of thing? If so, that's because you probably replaced zImage but didn't replace initrd.gz. Regardless, if you leave it on the screwed up black/white screen, it should load within 10-15 min.

[Q] Need help getting android

Ok im new and nobody has written me back about this so i have to ask this way but i flashed to the energy rom and i want android on it, i dont know how to go from where im at to that as all the threads ive seen has said download this and that but i really dont kno how to get energy off to do that but when i hit the launch android button it says "CLRCAD.exe was not found on your storage card...proceeding to launch Haret anyway" ok then "Haret.exe was not found on your storage card..." so can any body help me get android???
Hardware is:
RAM size 576MB
Flash memory size 1024MB
Data bus 32 bits
Software is:
OS version 5.2.21916
Manila version 2.5.20191914.0
ROM version 26 Jan.2011 WWE
Radio version 2.10.50.26
Firstly there are 2 ways of running Android, 1st via sd card and 2nd via NAND memory. The option you choose depends on whether or not you still want to use winmo. If so you need to use the sd card based Android builds. If you only want to use Android then you need to go the NAND based Android build approach.
As you mention running clrcad and haret I'm assuming you want to use the dual bot method, ie both winmo and Android. You will then need to device which Android build you want to try (from the Android SD dev forum) and carefully read the first few posts to see the dev's instructions, but in most cases you need to download and unzip the rom and copy the Android folder to the root of your sd card. In the NRG roms, clicking on the launch Android icon he includes in his build will run the clrcad and haret automatically and boot to Android.
thanx for your reply..thats the thing when i hit launch android it wont go...so when i copy the folder do i download everything even if it says its already on an if installed it might not work? thats where im lost
Try formatting the sd card completely so that there are no funnies on the card, copy the entire Android folder to the sd card root and you can ignore the warning about files that may not work etc.
ok ill give it a try
when you format your sd card will it erase the NRG rom and then you have to put it back on there?
1989jeremy said:
when you format your sd card will it erase the NRG rom and then you have to put it back on there?
Click to expand...
Click to collapse
No! Unless you will install nandroid.
Sent from my HD2 Droid HD using XDA App
ok just checkin..i want android on my sd card
ok i formatted my sd card then copied the android folder to it and it still did launch an when i clicked on the folder to run clrcad it didnt do anything an when i clicked the heret it just went to the htc screen and thats it...what did i do wrong??
Did you give it some time? I would ask the question in the thread for the actual rom you are using. Other users may have a solution for you.
1989jeremy said:
ok i formatted my sd card then copied the android folder to it and it still did launch an when i clicked on the folder to run clrcad it didnt do anything an when i clicked the heret it just went to the htc screen and thats it...what did i do wrong??
Click to expand...
Click to collapse
Good, so you've formatted your sd card and copied the android build, clrcad and haret.exe files to the root....Tapping clrcad (to run) doesn't show any visible signs but its actually working in background, then tap haret...u should see haret loading up & a bunch of text briefly (depends d android build)...The htc screen u saw means d android build is working silently in d background so give it some time...check d android build's page for how long you should wait..(most tk abt 8-20mins, i use nand now so i'm not so sure).....if the above still doesn't work for you,then u should try using d various android/winmo dual-booting cab files out there...
P.S. Devs say its best u load up android within 3 secs of loading WinMo, so be as fast as u can...u could also try disabling htc sense to give a quicker loading time....If dat still doesn't work, then u might have to reflash an android-friendly WinMo ROM.
lol i dont think i gave it enough time..kinda impatient but i got it at the htc screen right now..im using the froyostone v4.0 build
1989jeremy said:
lol i dont think i gave it enough time..kinda impatient but i got it at the htc screen right now..im using the froyostone v4.0 build
Click to expand...
Click to collapse
Dis you read the faq of the build you use? Like, wait 10-15mins on first boot...
Sent from my HD2 Droid HD using XDA App
1989jeremy said:
lol i dont think i gave it enough time..kinda impatient but i got it at the htc screen right now..im using the froyostone v4.0 build
Click to expand...
Click to collapse
Great...Remember 2 always read instructions carefully..the Devs put em there for a reason.
hmm...its been like 40 min an still at the htc screen...i looked for the thread but i cant remember which it was as ive been to a couple of them but neither one says how long the first boot would take
1989jeremy said:
hmm...its been like 40 min an still at the htc screen...i looked for the thread but i cant remember which it was as ive been to a couple of them but neither one says how long the first boot would take
Click to expand...
Click to collapse
Try core evo sd series.
Sent from my HD2 Droid HD using XDA App
do you have the link to the thread? i dont wanna download somethin different you know as a lot of things pop up in search
1989jeremy said:
do you have the link to the thread? i dont wanna download somethin different you know as a lot of things pop up in search
Click to expand...
Click to collapse
Just go to sd development section, it should be on the 2nd page of that section. Try core evo v0.8 by sergio76 or evo carbon remix by motoman.
By the way, what sd card do you have? Model, make, size, class.
Sent from my HD2 Droid HD using XDA App
ok thanx..itll work with the energy rom right?
1989jeremy said:
ok thanx..itll work with the energy rom right?
Click to expand...
Click to collapse
Of course. That's what I was using before nandroid.
Sent from my HD2 Droid HD using XDA App

[Mar 04][Q] Android on SD

Hi, this is my first post here
I've been here for a long time (well didn't have a handset so didn't find the need to join...)
I read through many articles and learned a lot from this forum
Last weekend I got my T-Mobile HD2 and I proceeded to install custom rom soon after
(latest Energy rom by NRGZ28- thanks)
The rom is awesome, it's just that I wanna try out android on my phone also...
I decided I'll try the SD first
So I followed a guide just downloaded the rom I want (MCCM GB V2.0 Gingerbread HoneyComb Sense theme) unzip, then copy to the root of my sd, run clrcad (don't know what he meant by working sound- I heard nothing) then run haret....
Then I am always stuck at the green letters screen forever, never get further...
I'm not sure what is wrong
I looked through all possible things
I did HardSPL4 and now has HSPL2.08, I got a custom rom
The only thing I did not change and think might be the problem is the radio...
my version is 2.10.50.26
Would flashing an updated radio make my android on sd work?
Is this "Leo_RADIO_2.15.50.14**" ok for my HD2? (on http://forum.xda-developers.com/showthread.php?t=611787)
Thanks for the help nice to talk to everyone~
gameg2l said:
Hi, this is my first post here
I've been here for a long time (well didn't have a handset so didn't find the need to join...)
I read through many articles and learned a lot from this forum
Last weekend I got my T-Mobile HD2 and I proceeded to install custom rom soon after
(latest Energy rom by NRGZ28- thanks)
The rom is awesome, it's just that I wanna try out android on my phone also...
I decided I'll try the SD first
So I followed a guide just downloaded the rom I want (MCCM GB V2.0 Gingerbread HoneyComb Sense theme) unzip, then copy to the root of my sd, run clrcad (don't know what he meant by working sound- I heard nothing) then run haret....
Then I am always stuck at the green letters screen forever, never get further...
I'm not sure what is wrong
I looked through all possible things
I did HardSPL4 and now has HSPL2.08, I got a custom rom
The only thing I did not change and think might be the problem is the radio...
my version is 2.10.50.26
Would flashing an updated radio make my android on sd work?
Is this "Leo_RADIO_2.15.50.14**" ok for my HD2? (on http://forum.xda-developers.com/showthread.php?t=611787)
Thanks for the help nice to talk to everyone~
Click to expand...
Click to collapse
Ha I guess you did not like the first option, so I will edit the whole post.
Running Andriod from SD is very simple as long as you follow the instructions to the T. If the Andriod folder you copied to your SD card has another folder in it that you have to open to get to CLRCLAD and HARET then you need to copy that folder to the root of your SD card. It is also important the name of the folder is Andriod. The first time you boot the Andriod it can take up to ten minutes sometimes cause it has to creat folders, files, and pathways. So maybe you are not giving it enough time to boot all the way up beforeo you hit the reset button or do a battery pull. Your SD card also needs to be formated correctly you want to format it usimg Fat 32, please make a back up copy of your card also if you reformat it as it will wipe it clean. Last but not least you may just have a bad download. Try redownloading the build and recopy it to your SD card then run CLRCAD and HARET.
The only thing a radio will do is cure robot sounding voices during a phone call while running Andriod but most builds now have that solved and are compatible with the current radio 2.15.50.14. Also when you touch on CLRCAD you will see or hear nothing it enables the sound on the Andriod build.
Last but not least being you have a TMOUS (T-Mobile) HD2. Be adviced that you most flash a radio version that has a 50 in the third set of numbers like 2.xx.50.xx. Do not flash a radio that has a 51 in the third set of numbers like 2.xx.50.xx. or a radio that looks like this 2.04.50.xx or 2.05.50.xx as they will brick your TMOUS HD2 reindering it usless for nothing but a paper wieght. And the only way to unbrick a HD2 is with a JTAG and a ORT wich will cost you and you will have to take your HD2 apart to fix.
O_O is the issue that difficult?
I don't mind calling though
Thanks
gameg2l said:
O_O is the issue that difficult?
I don't mind calling though
Thanks
Click to expand...
Click to collapse
I sent you s PM, look at the top right hand corner of your screen and you should see you have a mwssage click on it.
Any luckwith getting it to boot yet?
Thanks!!! I downloaded the newest updated Rom and it worked lol I was too drawn into it so completely forlorn to post here (only pmed)
But beheld this is nice
Sent from my HTC HD2 Gingerbread using XDA App
gameg2l said:
Thanks!!! I downloaded the newest updated Rom and it worked lol I was too drawn into it so completely forlorn to post here (only pmed)
But beheld this is nice
Sent from my HTC HD2 Gingerbread using XDA App
Click to expand...
Click to collapse
I use a Gingerbread build too.

How to install Android on my Sd for My HTC HD2

To anyone of knowledge I have a HTC HD2 I have been trying to install Android from on here from many diiferent links etc.. and everytime I installit to mycomputer then unzip and install on my SD i run the Clcrd then Haret then my phone either shows a penguine or htc logo I let it sit for over 2 to 4 hurs everytime i try to install it on my phone and it just sits there. is it something Im not doing are there steps Im missing or things I need to installl along with the android program i choose I am super frusrtated can someone please help me get android up and running .. Thanks
mallfox said:
To anyone of knowledge I have a HTC HD2 I have been trying to install Android from on here from many diiferent links etc.. and everytime I installit to mycomputer then unzip and install on my SD i run the Clcrd then Haret then my phone either shows a penguine or htc logo I let it sit for over 2 to 4 hurs everytime i try to install it on my phone and it just sits there. is it something Im not doing are there steps Im missing or things I need to installl along with the android program i choose I am super frusrtated can someone please help me get android up and running .. Thanks
Click to expand...
Click to collapse
you should try looking in SD DEVELOPMENT lol,but to be honest,why would u want to install it on ur sd card when u can have nand lol,if u have it on your sd card,everytime you reboot your phone,it'll go back to windows mobile,stay well away from sd card,none of that **** copying intrid & zimage to the root of your sd card lol and haret to sort the sound out,go with nand,you won't regret it
I agree with Ty5982. Nand builds are much faster booting and reliable compare to SD. Any reason why you want SD build?
mallfox said:
To anyone of knowledge I have a HTC HD2 I have been trying to install Android from on here from many diiferent links etc.. and everytime I installit to mycomputer then unzip and install on my SD i run the Clcrd then Haret then my phone either shows a penguine or htc logo I let it sit for over 2 to 4 hurs everytime i try to install it on my phone and it just sits there. is it something Im not doing are there steps Im missing or things I need to installl along with the android program i choose I am super frusrtated can someone please help me get android up and running .. Thanks
Click to expand...
Click to collapse
Agreed with other two posters, NAND is much better. As for your issue, I think it may be radio related, upgrade to HTCs latest official stock ROM 3.14
There's nothing wrong with SD builds. They're great for trying out Android without voiding your warranty, or to be able to dual boot Windows Mobile and Android, or to multi-boot NAND Android and different SD builds thru MAGLDR.
Just follow the instructions in the thread where you downloaded the build from, and all should be well.
Don't rename the folder that all the files such as HaRET and CLRCAD are in.
Go into that folder, open the startup.txt file in a text editing program, and check to see if it has a line that says Rel_path=
After Rel_path= it should say the name of the folder all your Android files reside in. If it's a different name than the folder name, re-name the folder to match the rel_path line, so if it says Rel_path=Droid69, then rename the folder to Droid69, and not droid69 as it is upper/lower case sensitive.
If you still can't get that build to run, try another I guess.
huggs said:
There's nothing wrong with SD builds. They're great for trying out Android without voiding your warranty, or to be able to dual boot Windows Mobile and Android, or to multi-boot NAND Android and different SD builds thru MAGLDR.
Just follow the instructions in the thread where you downloaded the build from, and all should be well.
Don't rename the folder that all the files such as HaRET and CLRCAD are in.
Go into that folder, open the startup.txt file in a text editing program, and check to see if it has a line that says Rel_path=
After Rel_path= it should say the name of the folder all your Android files reside in. If it's a different name than the folder name, re-name the folder to match the rel_path line, so if it says Rel_path=Droid69, then rename the folder to Droid69, and not droid69 as it is upper/lower case sensitive.
If you still can't get that build to run, try another I guess.
Click to expand...
Click to collapse
the hd2 was built so it could manage without a warranty.............so let the beast come out of the phone and go nand,no 2 ways about it
NAND and SD is even better, check my sig
a Im also In Toledo is there any way I can get u to help me do this correctly i will inbox my # to u
Yeah i cld probly help ya out, pm me
Sent from my HTC HD2 using XDA App
huggs said:
There's nothing wrong with SD builds. They're great for trying out Android without voiding your warranty,
Click to expand...
Click to collapse
Dude, if you're worried about warranty you are on the wrong site
Also, even if it does void your warranty, Its easy to get your device back to stock. Its not as if you need to open your device and rip the warranty stickers to get Android on nand lol.
No, I'm clearly not worried about my warranty, I was simply pointing out that that is one of the advantages of SD builds. Some people are worried about their warranties, or afraid they might brick their phone flashing a nand rom, and the sd builds are a safe alternative for risk averse or less experienced members.
I didn't say sd builds are the only or best way to go, I just said theres nothing wrong with them. Additionally, I don't think this is the wrong site for those who are worried about their warranties, there's still a wealth of information on this site for those who don't want to void their warranties.
Sent from my HTC HD2 using XDA App
Which Radio do you have? I had similiar problems to you but changing radio resolved them all, the first boot of any SD build should not take more than 20min, more means you're stuck. But again, NAND Roms are totally better then SD - faster, more stable, better battery usage etc. And Android wins with WinMo 6.5 in every challange so I would consider flashing a NAND ROM if I were you. Hyperdroid for the very beginning - definitely the best ROM available.
mallfox said:
To anyone of knowledge I have a HTC HD2 I have been trying to install Android from on here from many diiferent links etc.. and everytime I installit to mycomputer then unzip and install on my SD i run the Clcrd then Haret then my phone either shows a penguine or htc logo I let it sit for over 2 to 4 hurs everytime i try to install it on my phone and it just sits there. is it something Im not doing are there steps Im missing or things I need to installl along with the android program i choose I am super frusrtated can someone please help me get android up and running .. Thanks
Click to expand...
Click to collapse
I think you should use one of latest ROM below and notice with some instruction on this topic, everything will ok:
http://forum.xda-developers.com/showthread.php?t=1010498
HELP ME!
Okay I don't know if I'm posting on the right thread or not but I need help. I want to install the IceCreamSandwich/jellyBean rom on my HD2 SD card as well, its my only option since my usb port is broken. I already had gingerbread installed but I want to upgrade. I formatted my SD card (don't ask me why) by mistake. So whenever I cut my phone on it goes to the bootloader menu and somehow I navigate myself back to gingerbread. I'm a "noob" so I have little to no idea what I'm doing. Is installing this after all I've done even still possible? I need help please and thank you!

Categories

Resources