Related
I have a problem I can't understant how the new maglar recovery can be used? Someone please help me it is posible to have dandiest's desire z rom ( wich is daf) and cwm recovery at the same time?
sp33dy_gtx said:
I have a problem I can't understant how the new maglar recovery can be used? Someone please help me it is posible to have dandiest's desire z rom ( wich is daf) and cwm recovery at the same time?
Click to expand...
Click to collapse
You have to partition your SD card (gparted/ubuntu...)
1st: fat32 put the rom-zip into the root of this partition
2nd: ext4 1GB
3rd: ext4 400MB
4th: linux swap
Install CWR via MAGLDR like flashing a NAND rom (DAF etc...)
reboot, enter MAGLDR and goto boot AD SD - now U enter CWR
and then follow the steps as mentioned in the rom thread. (chose ZIP dfrom SD card... install... reboot...)
Good luck
It´s quite easy.
The above post will work UNLESS you use one of the cwm 1.3 partitions. Using cwm 1.3 puts the recovery files on NAND (so no need to copy files to the root of your sd card for recovery to work. In order to boot into Recovery you need to select AD Recovery instead of Boot AD SD
ClydeB1 said:
The above post will work UNLESS you use one of the cwm 1.3 partitions. Using cwm 1.3 puts the recovery files on NAND (so no need to copy files to the root of your sd card for recovery to work. In order to boot into Recovery you need to select AD Recovery instead of Boot AD SD
Click to expand...
Click to collapse
Sry, maybe I missunderstand the OP. Sounded for me like he has trouble to get installed DesireZ by using ClockWork AND trouble when installing Clockwork.
So let me conculde if I want to use this rom http://forum.xda-developers.com/showthread.php?t=913597 I cant I must use a rom with zip no? to be clear. thx guys
sp33dy_gtx said:
So let me conculde if I want to use this rom http://forum.xda-developers.com/showthread.php?t=913597 I cant I must use a rom with zip no? to be clear. thx guys
Click to expand...
Click to collapse
Try and follow this I found by searching for clockwork mod in the thread.
http://forum.xda-developers.com/showpost.php?p=10717996&postcount=603
Hi All
I don't know what I am doing wrong so I hope someone can help me.
I have tried using Clockworkmod and CLK but i am not able to flash my rom with any of them. I sometimes get a HTC screen but then nothing else. Sometimes my HD2 just reboots after a few seconds.
I have followed the guides word for word and tried CLK but still nothing.
I can update my rom using DAF, but all new roms come out in zip format only.
I have updated my radio to "Radio Leo 2.15.50.14"
I am doing something wrong? Can it be my SD card?
I hope someone can help.
Thank you in advance
Wrong forum.
I'm having the exact same issue - I was just about to open a new thread here but saw this thread and a post stating wrong forum - Please advise where can I post it?
Many thanks
LMGray said:
Hi All
I don't know what I am doing wrong so I hope someone can help me.
I have tried using Clockworkmod and CLK but i am not able to flash my rom with any of them. I sometimes get a HTC screen but then nothing else. Sometimes my HD2 just reboots after a few seconds.
I have followed the guides word for word and tried CLK but still nothing.
I can update my rom using DAF, but all new roms come out in zip format only.
I have updated my radio to "Radio Leo 2.15.50.14"
I am doing something wrong? Can it be my SD card?
I hope someone can help.
Thank you in advance
Click to expand...
Click to collapse
What ROM are you using?
What is System partition Size for that Rom you're using?
Have you used right partition size while flashing MagLdr or Clk?
And have you used Ksubedi's Toolkit?
Because the symptom you're describing is only experienced when you use a partition size smaller than what is recommended.
For example if the Rom requires a partition of ATLEAST 200M and you flash a partition of 150M. You will get stuck at the Logo Screen. AKA HTC Screen. Or as you proclaimed, it won't even boot. So please provide more information as to which Rom and partition size you used and I will try my best to help you.
And don't pay any attention to A jerk telling you "Wrong Forum"
We will help no matter where you post it.
And Spuri give your Rom and install method, I will try my best to help you as well.
Sent from my HTC HD2 using XDA App
Thank you so much - here it goes..
I've been flashing Android roms for a while but for the last couple of weeks I'm having issues with installing any CWR/CLK rom - After flashing the rom, the screen is stuck at GO GO GO and then it goes in a boot loop. I have searched and I have followed all the steps down to the T. Anyway, following are the steps I have taken so far:
Format SD Card using SD Formatter
HSPL3 (2.08)
Task 29 (Using HD2 NAND Toolkit)
Install Radio (2.15) (Using HD2 NAND Toolkit)
Install MAGLDR (Using HD2 NAND Toolkit)
System Partition (As Recommended by the Chef) (Using HD2 NAND Toolkit)
wipe cache partition
Wipe Dalvik Cache
Partition Card with 1GB (As Recommended by the Chef)
install zip from sdcard
Fix Permissions
Reboot
Currently, I'm using BOYPPC-SHIFTPDA_Desire HD A2SD V20 (21.Jul) via DAF method without any issues.
I have used different SD cards but no luck - Currently I'm using 16GB Lexar Class 4. I can flash fine via DAF method. I have also done dual boot with Android and Windows Mobile without any problems. So,if I have successfully run an Android via a SD card (dual boot) so obviously SD card is not the problem?
This is really doing my head in so if anyone can help me with this, that'd be great.
Many thanks
Okay. Try to find Coredroid v1.6. Go here: http://hotfile.com/list/1335611/19f8a51 download the second file. There are instructions in there that you can follow. And since you have already partitioned SdCard, you can skip that part. And Btw, you don't need to do the "Fix Permissions" thing that you stated before. That is only done when you experience problems with apps in the Roms after first boot. And for the above Rom use a partition size of 400M.
Sent from my HTC HD2 using XDA App
rafiqzadah said:
Okay. Try to find Coredroid v1.6. Go here: http://hotfile.com/list/1335611/19f8a51 download the second file. There are instructions in there that you can follow. And since you have already partitioned SdCard, you can skip that part. And Btw, you don't need to do the "Fix Permissions" thing that you stated before. That is only done when you experience problems with apps in the Roms after first boot. And for the above Rom use a partition size of 400M.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Thanks for your prompt response - Btw, I forgot to mention that I have a LEO 512 - should I still install the second file which is for LEO 1024?
Rofl sorry ignore the step 1 and then jumping to 3. Just do this exactly. And I have adjusted the file to a EU version Rom with partition of 190m. And so with your SD that was partitioned already, you should be good to go.
1. Go here and Download. http://www.multiupload.com/ZH0WFJBT6P
3. On second Link download HD2_Core_Droid_Desire_HD_V1.6_TMOUS_NAND_ONLY_LEO1 024.rar file 4. In Toolkit Do "Task29." Then Flash MagLdr with size 190M and cache size 5M. 5. After the Flash of Magldr. Boot into MagLdr by HOLDING DOWN!!! Power Button during bootup. 6. Go to Option "5. Usb Flasher." and wait for "Wait USB...USB." 7. Once "Wait USB...USB." is confirmed. Go to the "Daf.exe" file in the COREDROID V1.6 file you downloaded before and "RUN AS ADMINISTRATOR." 8. Once Finished Reboot into MagLdr AGAIN. This Time go to Option "8. AD Recovery." 9. Since you have already Partitioned SD. Then no Need to do so again. 10. Go to "Mounts and Storage" Then "Mount USB Storage" 11. Copy the Pyramid_HTC_WWE_1.35.401.1_v1.5_EU.zip to SD. 12. Once finished Hit the "BACK ARROW" Button. 13. Go down to "Flash ZIP From SDCard" then "Choose Zip from SDCard" 14. And Pick Pyramid_HTC_WWE_1.35.401.1_v1.5_EU.zip and flash. 15. Once finished, Reboot Phone, Leave it for about 20 Minutes because its First Boot. And Your Done. 16. Hit Thnx if this Helped.
Sent from my HTC HD2 using XDA App
Sorry, I'm a bit confused - Do you want me to flash Pyramid rom or core droid rom? For Pyramid rom, use 190M and for Core Droid 400M right? I did previously try flashing the latest Pyramid rom which 1.7 bit it didn't work - I used 200M for that but I'll try your recommendation and see how it goes.
Thanks.
Yes try the pyramid Rom with my steps exactly and you should be fine. But you have to run the Daf.exe from the Coredroid Rom once you are in Option "5. USB Flasher"
Sent from my HTC HD2 using XDA App
rafiqzadah said:
Yes try the pyramid Rom with my steps exactly and you should be fine. But you have to run the Daf.exe from the Coredroid Rom once you are in Option "5. USB Flasher"
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
One final clarification - You mentioned that I should install 190/5, when I install DAF.exe from the core droid folder, wouldn't that override the 190/5 as I was under the impression that DAF.exe was a partition size as well.
Thanks
EDIT: This step 'Then Flash MagLdr with size 190M and cache size 5M.' I don't understand either - After Task 29, shouldn't I be installing mag and then flashing the 190/5 partition?
Ok - I followed the steps and after flashing the rom, the screen is stuck at GO GO GO - I'm sick of this - I just don't know what's the issue.
Anyone?
I tried flashing HD2_Core_Droid_Desire_HD_V1.6_Release_Version and that's stuck at GO GO GO screen as well.
spuri78 said:
I tried flashing HD2_Core_Droid_Desire_HD_V1.6_Release_Version and that's stuck at GO GO GO screen as well.
Click to expand...
Click to collapse
What flash.cfg did you use for CWR?
The reason of GO GO GO is in my opinion because of small CWR flash.cfg. Because I had the same problem and I just changed as it was in the rom's topic.
dawid. said:
What flash.cfg did you use for CWR?
The reason of GO GO GO is in my opinion because of small CWR flash.cfg. Because I had the same problem and I just changed as it was in the rom's topic.
Click to expand...
Click to collapse
I used the following:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 10M
system ya 390M
cache ya 5M
userdata ya|asize|hr allsize
Just want to reiterate that the GO GO GO issue is after flashing the rom - I can boot in CWR fine - The weird thing is that I have always followed what the chef has recommended in his/her rom - This issue has had me stumped - I virtually can't install any NAND rom - Maybe I should try a third SD card? I just don't know.
Did you try to install the one I gave to you?
Because from what I can see you are trying to install build with HTC SENSE right?
Try to install the one I gave you it is simple clean gingerbread rom.
If you tried then I don't know, try task29 and then try to install it all again.
Or try installing SD card version
Okay I will give you exact instructions. And BTW the Daf.exe is so you can boot into AD Recovery in MagLd.
1. Task 29.
2. Go to toolkit and Center Left you will see box with sizes of 150 200...... Click on 200M. Under that box is a little box with 45M as default cache size, change it to 5M.
4. Go in MagLdr. This is what I mean, try to go to Option "8. AD Recovery." It wont right? So go into Option "5. USB Flasher" and run the Daf.exe from the Coredroid folder and run as administrator.
5. Once finished boot into MagLdr once more this time going to Option "8. AD Recovery."
6. (This step is optional, but mandditory if you have not done so already)Once in AD Recovery, go to "Advance" menu, partition SdCard, and use the size 1024M,it will ask for swap size next, use 0M.
7. Once partitioned, go back to "Mounts and Storage" then to "Mount USB Storage."
8. Once mounted, copy the Pyramid Rom to root of SdCard. Once finished, hit back arrow once.
9. Go to "Install ZIP from SDCard" then "Choose ZIP from SdCard" and choose the Pyramid Rom. Let the flashing finish. And reboot phone.
10. Let the phone settle for 5 minutes in first boot, go through Setup. Then reboot phone.
Sent from my HTC HD2 using XDA App
dawid. said:
Did you try to install the one I gave to you?
Because from what I can see you are trying to install build with HTC SENSE right?
Try to install the one I gave you it is simple clean gingerbread rom.
If you tried then I don't know, try task29 and then try to install it all again.
Or try installing SD card version
Click to expand...
Click to collapse
I was trying all the HTC Sense builds but even a MIUI build giving me headaches - Obviously, I'm doing something wrong but can't figure it out - I have tested the SD card version and that works fine i.e dual boot Windows Mobile and Android - Sorry, which gingerbread rom you want me to install?
I'm heading to work - will try when I get back
spuri78 said:
I was trying all the HTC Sense builds but even a MIUI build giving me headaches - Obviously, I'm doing something wrong but can't figure it out - I have tested the SD card version and that works fine i.e dual boot Windows Mobile and Android - Sorry, which gingerbread rom you want me to install?
I'm heading to work - will try when I get back
Click to expand...
Click to collapse
Download CWR 4.0 and flash it in MAGLDR (it has configured parition size for this rom so just flash it don't change anything): http://www.multiupload.com/VZ1WB57AOY
then
Download this rom: http://www.multiupload.com/8UPNV5WUZU and install it in CWR.
one option: switch to DAF(MAGDLR)....
hi guys i have used the Recommands partition for the roms 1GB ext4 partition on my sdcard and tried 2GB, flashed WIPE IT and wiped dalvik also tried task29 and started from scratch, any help would be much appreciated really want to try sense 3.5
thanks
Hi, a possible cause of problem - check your zip file (ROM), copy it to PC and try to unpack, may be it's broken. Sometimes you don't have error message when flashing, but when check on PC it shows errors.
thanks mate i will give that a try
i just extract the 2 roms i have been trying to get to work they seems ok
have you got the correct partition size for the rom ?
Which Sense ROM are you using, anyways?
Try a ext 3 partition on your sdcard then run clean install
thanks guys im sure that i have the correct partition size used HD2 tools and i have been trying to run SENSATION XL ROM EU Clk V 1.0, TBD_Runnymede_sensation_xl and not sure if i have a ext 3 partition i used cLk to partition the sd card thanks again
cozman85 said:
thanks guys im sure that i have the correct partition size used HD2 tools and i have been trying to run SENSATION XL ROM EU Clk V 1.0, TBD_Runnymede_sensation_xl and not sure if i have a ext 3 partition i used cLk to partition the sd card thanks again
Click to expand...
Click to collapse
Have a look at this it enables you to see your partition and convert or revert, might be of some interest to you..... Good Luck.
http://forum.xda-developers.com/showthread.php?t=1154221
can that be flashed on the hd2
cozman85 said:
can that be flashed on the hd2
Click to expand...
Click to collapse
yep... just install via cmw and it will reboot go into ad recovery and you'll see some new options.
Note:Once you reboot it will be gone, if you want it back repeat install.
Nice and handy - Check it out..
Edit: I'm using 4EXTRecovery v2.1.3 RC2 - No problems.
i have had a go at 4EXTRecovery created ext3 and tried ext4 1gb partitions
and copied the rom over through 4EXTRecovery but the rom always hangs at wipe sd-ext
same problem
good morning everbody,
i have same problem - for days i am trying to flash a newer rom and after installing my phone is always keeping to show the bootup logo of each rom i flashed.
i use the magloader 1.13, the recovery 3.0.0.5 and the radio 15.
i am able to install the stock rom of winmo 6.5 from htc (vodafone) an everthing is fine. but going back to a custom android rom is not working anymore.
even if i try to go the "right" way, means:
having the winmo rom --> flashing radio --> flashing magloader --> flashing recovery --> wiping data/reset, wiping cache, wiping that dia*** --> putting rom.zip on the sd card via pc --> installing the zip via recovery. that all works until the phone has to boot. i tried over 8 different roms.
befor i startet to update, i hab an coredroid rom v1.3 and it was booting.
perhaps anybody knows whats my problem with this nd lets me now what i have too look for?
great thanx, cause until now i can only go back to my stock winmo rom and thats boring to me... :-(
Nickman_83 said:
good morning everbody,
i have same problem - for days i am trying to flash a newer rom and after installing my phone is always keeping to show the bootup logo of each rom i flashed.
i use the magloader 1.13, the recovery 3.0.0.5 and the radio 15.
i am able to install the stock rom of winmo 6.5 from htc (vodafone) an everthing is fine. but going back to a custom android rom is not working anymore.
even if i try to go the "right" way, means:
having the winmo rom --> flashing radio --> flashing magloader --> flashing recovery --> wiping data/reset, wiping cache, wiping that dia*** --> putting rom.zip on the sd card via pc --> installing the zip via recovery. that all works until the phone has to boot. i tried over 8 different roms.
befor i startet to update, i hab an coredroid rom v1.3 and it was booting.
perhaps anybody knows whats my problem with this nd lets me now what i have too look for?
great thanx, cause until now i can only go back to my stock winmo rom and thats boring to me... :-(
Click to expand...
Click to collapse
cozman85 said:
i have had a go at 4EXTRecovery created ext3 and tried ext4 1gb partitions
and copied the rom over through 4EXTRecovery but the rom always hangs at wipe sd-ext
Click to expand...
Click to collapse
I'd try this: Back up sd if required.
1/ Remove sd from ph and place in a card reader on pc use "SDFormatter" change options format type to Full (Erase) this will erase the Ext Partition & format the card. Put the card back in the ph.
2/ Volume Down + Power Tri color connect usb. Using "HD2 Toolkit" do Task29 this will wipe the ph.
3/ Tri color Using "HD2 Toolkit" install Magldr (don't know about cLK)
4/ Boot ph go into Magldr navigate To "usb flasher" Using "HD2 Toolkit" select "Magldr repartition" Make sure that you are using the recommended partition size for your rom! Flash partition as directed. Ph will reboot go into "ad recovery" "advanced - partition sd card" select 1024m - 0M this will create 3EXT partition. (Some roms are not compatible with 4Ext) Reboot into "Recovery" select "mount sd" move your "Rom.zip" to sd. Close "mount sd" and select "Install zip from sd - Choose zip from sd" select the zip and install and reboot! .....
thanks everyone for your help after a week digging it was my sd card put a new one in and now running sense 3.5 . thanks again
@ a3r0n1 :
thansk for your advise. it took me some days cause i had no time but after i did exactly what you wrote, my newest coredroid rom is running.
Many Thanks !!!!
Hello,
Ive magldr cwm recovery installed, and a magldr NAND rom.
Yesterday i tried to play with rom manager.
I didnt know it only work with clk, and i made the mistake to update recovery throug rom manager.
So it broke my MAGLDR cwm recovery :-(
My question is : can i repair my MAGLDR cwm recovery without wiping my rom?(because i didnt recently do a nandroid backup)
Thx for your help.
Unfortunately, no you can't.
The only way to fix your cwm is to re install cwm. And that will wipe off your rom, data and everything else.
Edit:
wow, i never knew about that !
denseye said:
Hello,
Ive magldr cwm recovery installed, and a magldr NAND rom.
Yesterday i tried to play with rom manager.
I didnt know it only work with clk, and i made the mistake to update recovery throug rom manager.
So it broke my MAGLDR cwm recovery :-(
My question is : can i repair my MAGLDR cwm recovery without wiping my rom?(because i didnt recently do a nandroid backup)
Thx for your help.
Click to expand...
Click to collapse
I think you can do it.
If your phone still don't boot, reflash your Rom without wipe maybe can help
Sent from my GT-I9100 using xda premium
get a version of cwm that loads from sd card,
put it on your sd
from magldr choose 'ad sd'
flash a new cwm.zip using 'instal zip from sd' option.
samsamuel said:
get a version of cwm that loads from sd card,
Click to expand...
Click to collapse
where can I find one ???
samsamuel said:
put it on your sd
from magldr choose 'ad sd'
flash a new cwm.zip using 'instal zip from sd' option.
Click to expand...
Click to collapse
won't it wipe my rom data ???
We are just writing an image to the already created recovery partition,, not using daf to write a partition layout. It's just like flashing a rom, but only the recovery partition is affected.
In the android nand section, titled something like "clockworkrecovery, nand,SD, ver 5.0.2 yes/no stable" or something, (currently top post
Get both
recovery_5.0.2.6_leo_sd.zip (3.93 MB, 1153 views)
and
recovery_5.0.2.6_leo_CWR.zip (4.25 MB, 3415 views)
Extract and copy the SD card ver onto SD card (copy the two files to SD, done)
And then copy the whole cwr.zip to SD card too.
Then, into magldr, "ad SD" will boot into the cwm files you placed on SD, and choose instal zip from SD,,, choose zip,, and select the cwm.zip you also placed on SD.
This will write the cwm image into the recovery partition without reflashing the cwm partition layout, so nothing lost.
it worked
thank you for your help and your very precise explanations
welcome. Its worth leaving those two files on the SD in case recovery fails for whatever reason, since you can backup and restore just like in nand cwm recovery.
samsamuel said:
welcome. Its worth leaving those two files on the SD in case recovery fails for whatever reason, since you can backup and restore just like in nand cwm recovery.
Click to expand...
Click to collapse
yes indeed
I will keep those to files on my sdcard
Many thanks to samsamuel !
i could not get into the CWM menu, but with your help i was able to flash to a new custom rom.
In attempting this, I get the following error:
Writing recovery partition...
assert failed: write_raw_image("/tmp/recovery.img", "recovery")
E:Error in /sdcard/recovery_5.0.2.6_leo_CWR.zip
(Status 7)
Installation aborted.
Any help?
Perhaps the recovery partition is too small? Perhaps you don't have a recovery partition? Check the flash.cfg you last used for partition sizes you used.
Alternatively, use the SD cwm to make a backup and do a fresh flash.
samsamuel said:
Perhaps the recovery partition is too small? Perhaps you don't have a recovery partition? Check the flash.cfg you last used for partition sizes you used.
Alternatively, use the SD cwm to make a backup and do a fresh flash.
Click to expand...
Click to collapse
I have the same error as the person above you. Do you recommend using the SD cwm to flash Recovery_150M_system_44M_cache[v3.0.2.4].zip? I cannot recall what flash.cfg I used.
I think I may have no recovery partition if I recall correctly. I digged through my old files I think this was the flash.cfg I usd:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 150M
cache ya 44M
userdata ya|asize|hr allsize
Click to expand...
Click to collapse
I had the same error. I made a copy of the recovery_5.0.2.6_leo_CWR.zip and copied my original CWMRecovery's recovery-raw.img on top of the new zip's recovery_leo.img file. That got me past the error and AD recovery works now.
Thanks for that just fixing mine as well now
does not work for me, boot AD SD = ssSD Kernel open failed, no idea.
But manage to reinstall the recovery without wipe with Windows version software - HD2 Toolkit, connect USB cable to PC, while phone staying in Andriod, run Toolkit > MAGLDR update recovery > click "update" and done.
gl7 said:
does not work for me, boot AD SD = ssSD Kernel open failed, no idea.
But manage to reinstall the recovery without wipe with Windows version software - HD2 Toolkit, connect USB cable to PC, while phone staying in Andriod, run Toolkit > MAGLDR update recovery > click "update" and done.
Click to expand...
Click to collapse
Same problem here??? Why?
I have the same problem. Add sd dir does not work. I only get back in the menu.
Using the toolkit and update the recovery shows this fault.
Look attachment.
I want to flash the new ics nexus rom without loosing data. Normal i would flash in ad recovery and make a update. Poorly i tried this Tom manager and now my recovery is broken.
Anyone can help? Sry for my german-english.
Wow, I didn't know that
Your radio links are blank
samsamuel said:
get a version of cwm that loads from sd card,
put it on your sd
from magldr choose 'ad sd'
flash a new cwm.zip using 'instal zip from sd' option.
Click to expand...
Click to collapse
Kindly check on the status of your radio links as the seem to lead to a dead end.
After Installing ParanoidAndroid3.69
Rom, phone rebooted the stucked on HTC Black green logo and restarts
for several time
What i Have to do?
Did you make the correct partition size (for system and cache)? Have you partitioned your SD card accordingly (if required)?
need more info.
Marvlesz said:
Did you make the correct partition size (for system and cache)? Have you partitioned your SD card accordingly (if required)?
need more info.
Click to expand...
Click to collapse
I made take29 And Instaled MAGLDR then MAGLDR Recovery And then booted in recovery mood then installed zip from Sd Card (Formatted In Primary Partition Fat32 and Primary Ext-4 ) then Installed In Data On Ext Mod then Finished Setup And till Now its Restarting Again and again....
When you installed 'MAGLDR Recovery', did you select the correct sizes for your ROM?
Marvlesz said:
When you installed 'MAGLDR Recovery', did you select the correct sizes for your ROM?
Click to expand...
Click to collapse
i didn't get this option when installing magldr recovery
how can i do this???
Max_Man said:
i didn't get this option when installing magldr recovery
how can i do this???
Click to expand...
Click to collapse
Step #10 from this post.
Do not use 150 and 5, these are the defaults for another ROM. Find your own values in your ROM's thread.
when i tried to do the steps again it stucked on USB Flasher mode
Wait USB...
!!!!!!
Done
Thanks alot my friend this step i was totaly ignoring it
so thanks alot for your help :good::good: