Ok so I don't know if watermark would be the right word. But that is the best way to describe it. I had my phone in the case in my purse. Woke up and went to use it and it had a perfect rectangle in the middle of the phone that looks like maybe the screen has been pressed to hard and never let go of. I will show a picture to let you see what I'm talking about. I've never dropped my phone. And I know nothing happened to it because I was sleeping and it was never touched. I've tried to contact htc, no response. And I purchased my phone off of craigslist so not sure on the warranty and that sort. But I am very sad and hope that maybe you guys can help me. I've searched high and low but every search comes up with nothing, or not exactly the same problem I'm having. I've soft reset and hard reset but to be completely honest with you I think that It has nothing to do with the software but the actual hardware.
Thank you in advance!
it is called newton-rings you can read more about that on wikipedia
you can find discusion in here
http://forum.xda-developers.com/showthread.php?t=531329
hope that HTC will help you with this
oh thank you so much that's all I needed was a name for it!
I have noticed a mark like yours on my screen for the past few days, just thought it was about a damp under the screen protector, so today whilst installing wm6.5 I decided to remove the screen protector, only to find that the phone no longer responded to touch screen! looks like ill be in contact with HTC tomorrow about getting it sent back for repair.
I don't know if I am completly correct when writing this, so please correct if I am totally wrong.
This is not actually, per definition, newton rings. As described on wikipedia, newton rings is reflection of light between two surfaces where one is flat and the other is spherical. The width of the light and dark rings are supposed to become smaller the further out from the center of the spherical surface you go.
I have not opened my device yet, but I have a feeling that it is som kind of fluid that is doing this. I actually have a drop of some kind of fluid (probably water) coming in from the right side of the screen, just above center.
I will post back as soon as I have opened it.
EDIT: Ok, it seems I could be very wrong as I found this post: http://forum.xda-developers.com/showthread.php?t=560051
BUT, i still have drop of water (I think) coming in from the right side of the screen.
Related
Hi guys
I had a weird problem with the screen of my P3600...
I was using it as a gps with tomtom in a friends car, and that moment i had it screen down and was just supporting it with my hand on my leg. I was holding it gently and had no pressure on it!
I had turned of the screen and since we were on a highway i was just waiting for the exit witch was still a bit far. Around 5-10 minutes latter i turn around the phone and to my surprise the screen had 2 horizontal cracks all the way from one side to the other... The screen is still 100% visible and there were no liquid crystals spill, but 80% of the screen has no touch sensibility.
Resons why this happened? I would assume heat, since it was connected to the car lighter, and was on my leg, and also it was arround 35ºC... But then again, it wasn't unbearably hot, only warm... If it was because of this, i believe it has to be a factory fault. The screen has to be able to sustain more heat than this.
I've send it to RMA, but I'm afraid they just deny it saying it was because of a drop. There are no marks on the phone as it never dropped on the ground!
Anyway... Can you guys point me out to some site that sells spare screens for my P3600? I want to check out the prices so i have a better idea if they decide to charge for the repair, if they are charging too much, and if it's worth doing it myself.
Thanks in advance for any help!
(Sorry about my English )
im really desapointed about it, generally screens cost pretty much, i dont suggest buying new, asumming you have never drop the pda, you have to put press on them to change the screen with the warranty, go to other service poits and ask, they have to change the screen tell them to check everything inseide the phone first ( they can see if enything else is moved ( that means there was a drop) if not, they cant refuse to change the screen)
fixing it by your self seems to be hard.. ... i dont know... try harder making them change it free of charge...
similar problem
Last week when playing a game suddenly the screen went black and a couple of large cracks appeared on the screen. sound and phone were working but no picture.
I got the pda from my company and got it replaced right away, was told it was a known problem(in my company with a couple of hundred P3600 users)
Sorry for OT but I have to say it must be a cool company...
Hi folks. I have damaged my topaz but I'm not sure if it's the digitiser or the lcd screen, so I'll describe what happens:
The touch screen will stop responding after I've been using it and if I turn off the screen I can see a small dark patch (where my finger last touched it) with some small tiny 'bumps' surrounding this dark area. If I gently rub the screen with a soft cloth or similar, this dark area disappears and the touch screen starts responding again. However, I am having to do this procedure a lot - I mean like every 10 or 20 seconds if I'm touching the screen a lot or dragging stuff around - heck, it's a 'touch' phone, I can't help but touch it !!!
A new screen is a lot more than a new digitiser, and I figured that since the digitiser sits on top (right ) then it may be this that is u/s ?
Any help, comments or diagnostic clues are much appreciated.
Cheers, peace
Chris
umm, can it be water between the screen and touch sensor layer? Have you brought the phone to highly humid places, or something like that?
Some photos will definitely help identifying the problem.
Sounds like this:
http://forum.xda-developers.com/showthread.php?t=522813
I had it, and my provider repaired it. Unfortunaly I have the problems again... but not that much. When its getting too extreme, I'll send it back once again
^ I'd say that's it, I did find another post with a photo of something similar too.
I think mine happened when my wee girl got a hold of the phone -
I'm still a little unsure as to what component is damaged tho. Maybe a little 'investigation' with a screwdriver is needed ...
Thanks for the replies so far
Peace
Using a screewdriver will defenetly kill your guarantee. Mine was repaired for 0€$ ... I would try this first, as you can still offer it back when they say u have to pay few 100€$.
I've noticed a defect on my screen, it looks like a watermark, as if the glass hasn't been coated correctly.
I took the phone back to the shop today and swapped it for another which has the same issue (although not so severe). It's most noticable when the screen is off in bright light.
I'm waiting for new stock to arrive Friday but in the meantime has anyone else noticed this problem?
Nope. Everything fine here. (Or at least I can't find anything )
Ah great, I was thinking it was just me.
I can see it in mine too, around the borders of the glass and especially around the windows button. It mostly shows up when there's fingerprints on the glass, you can see a distinct lighting change around the affected areas.
I'll try to get a picture of it.
Ah ok, found it.
But I don't think that this is a defect or sth.,
My guess: These areas lipophobic? Maybe there was some glue on it? Some you won't see any fingerpints on these areas. This would eplain why you can't see them when there are no fingerprints on the screen.
No big deal for me tough.
I don't think it's glue. It looks like a screen coating.
I've tried removing it with both isopropyl alcohol and thinners and neither would touch it.
I thought it was a plastic cover to peel off - but no
Me too, I thought it was a plastic cover to peel off - but no it does not peel off, i have air gaps under the edges on 3 sides - and the largest is under the htc screen logo :-(
Me too - one long finger top left and some other places bottom and side
pretty sure its some sort of glue residue - you can feel a slight change in resistance
can see it easily by blowing on glass - seems to resist condensation
looks just like screen has been given a quick wipe to clean and they've missed a couple of bits top and bottom.
tried screen wipes and opitcal wipes but no effect
Me too
Recieved mine yesterday, immediately noticed the effect. All along the bottom by the buttons, and along the the left hand side.
Looks like 2 layers didn't completely bond perhaps? The glass and whatever provides the black background.
Tim
me as well, ill upload a video of mine in half an hour, its pretty bad on mine, most of the time it isn't visible. and yeah resistance on that area is different when i rub my thumb hard over the screen it is smooth, but over those droplet like parts there is friction..im guessing that most of my screen is coated and those bits are mistakenly not.
(i thought it was the other way round before)
VIDEO OF SCREEN DEFECT-VIMEO
Same issue here - like an air bubble just beneath the surface of display. My device is slightly affected across the top edge, which is not so bad, but there is a large blob just below the windows key along the bottom edge which is a little distracting. Shame it looks like HTC shipped with such a widespread product defect, as this appears it could be.
Am also finding GPS very flaky - location services more often then not just don't work.
Still, very impressed with WP7. Think HTC could do better ... am wondering what the Samsung is like and what the Venue Pro will be like. Tempted to switch!
same issue here. seems all devices have this feature ...
ps: today in the office i checked again the screen and found out that you can find this bubbles around the screen everywhere. seems it reacts on humidity. strange ...
I've been back to the Vodafone store today as they had received new stock. Both handsets we looked at had the same issue.
The manager at the store said that HTC were going to be issuing a recall and that they were aware of the problem.
I am awaiting a call regarding an alternate replacement.
Ok for me!
same here, especially around bottom left corner, around the left arrow.
I noticed when you wipe the screen hard it disappears, but after a few touches of the screen it appears again.
I wrote to the HTC also and waiting for the reply :
same here - allaround the screen
enak said:
I've noticed a defect on my screen, it looks like a watermark, as if the glass hasn't been coated correctly.
I took the phone back to the shop today and swapped it for another which has the same issue (although not so severe). It's most noticable when the screen is off in bright light.
I'm waiting for new stock to arrive Friday but in the meantime has anyone else noticed this problem?
Click to expand...
Click to collapse
i think everyone have this problem, specilly from vodafone. and i also have software issue, everytime after using the marketplace, and the icon of some apps were gone, and no preview of the pictures. also the apps download from marketplace not seems to be running, after long time use.....already retun the phone to vodafone, and waiting for the issue to be solved...
My screen is ok. Well, not really oké. Since they didn't put a slcd on it, but a worser screen... Luckily no bubbles. I checked it 1000s times in all kind of lights and darknesses and with and without finger prints. But no bubbles here.
Same problem !!!
I have the same Problem (Austria, A1)
HTC Trophy
Hi,
Same problem here, bottom and one in the top.
Vodafone Portugal here :-(
I bought mine 2 weeks ago. Will Vodafone give another phone?
Thank you.
Hi,
On my rooted nook touch, sometimes the touch screen stop working.
It appends whatever software i'm using and randomly. Buttons works, page refresh works too and the nook doesn't lag, it's just a touch screen crash...
I tryed to unregister the nook and to update it from 1.0.0 to 1.0.1 then root it again but the problem still here.
Do you know a solution for this problem ? each time it's append I must hard reset the device (power + right bottom buttons)... is there a service to restart to enable touch screen again ?
Thanks
Hi, I'm new here ^^.
I bought the nook touch 2 months ago, and it worked perfectly until yesterday. I installed MSN Mercury from the market, I logged on my account, but when I clicked the menu button, the touch screen stopped working and I used adb reboot from my pc to restart it (I didn't know how to hard reset).
It scared me a lot, and I uninstalled that msn when I restarted the nook.
I request a solution for this too, and, do you know a simple MSN that works perfectly on our e-Ink nook?.
PD: Sorry for my bad english ^^u
Same as you.
Just screen is out of response.
Happened both 1.0.0 1.0.1.
Sent from my NOOK using Tapatalk
i'd seen a thread about this problem in the B & N forum, many users have this problem but there is still no patch to solve it...
Acidmaster said:
i'd seen a thread about this problem in the B & N forum, many users have this problem but there is still no patch to solve it...
Click to expand...
Click to collapse
Long thread about the subject.
From the thread and running into the issues myself, it seemed to be a sensor/dust issue as the only solution I found working is wiping the screen with a cloth or so. This is kind of sad since I already has a screen protector on it but I guess any bit of dust on the screen could cause the touch function to fail.
monkeygod said:
From the thread and running into the issues myself, it seemed to be a sensor/dust issue as the only solution I found working is wiping the screen with a cloth or so. This is kind of sad since I already has a screen protector on it but I guess any bit of dust on the screen could cause the touch function to fail.
Click to expand...
Click to collapse
I do not have much faith in the dust theory, you'd need some serious dust, like sand, on your screen for the sensor array to even notice it
Remember, it's not a touch sensitive screen like those on phones and pads, but a rather coarse infrared grid "above" your screen.
I've experienced this once myself, and then I simply put the NST away for the night and when I woke up in the morning it was working again which makes me suspect a lockup in the driver,
Had this happen to me. Here is the timeline
1. Girlfriend bought nook for birthday
2. Dropped said nook after 2 months or so
3. Bought refurb off ebay from B&N's ebay account
4. Screen would stop working randomly
5. Contacted support
6. They shipped me a refurb replacement
My second nook wasn't under the extended warranty or even a 30 day warranty. Its a manufacturing issue so they should replace it for free.
Ok, so I had this same problem, and took it to B&N, they said that they hadn't seen that before a gladly replaced it for me. To this day I'm still not sure what caused it, but I know it happened after leaving it in a pretty how car, but not sure if that's linked or not. My current one which I've had for about 5 months hasn't had any problems.
Old thread is Old but I'd gotten mine knocked out of my hands. Screen looks undamaged but the hardware buttons don't appear to do nything other than holding down the n switch to make the glowlight come up. Tried putting it to sleep, plugging it into a computer. Only thing that seems to indicate it isn't a total brick is the glow will come up. Other than that screen has a static of the last book I was reading in coolreader.
Bought the thing for an easter preasent to myself from walmart. Still have the box but it's rooted and til the drop had no problems whatsoever (well problems that weren't due to user error.) Saw a 'leave it overnight' suggestion and am going to ttry that.
Is there anything I can try or is this going to be one of those 'the outside looks fine but the slight bump wiggled something loose that you're going to need to tear the whole thing apart to fix.' things?
Edit: failing that could someone walk me through the button presses/times to press each button to un-root/restore backup using NookManager? I'd be doing that blind as the screen only shows an image from coolreader but I figure better to try taking it back to stock before returning even if nobody looks it over.
Hi All,
Solution for screen as simple as... get tissue, dump it with a bit of water (tap water will do) and clean your screen carefully. Solved Make sure that water gets into corners of screen. There is some kind of filter. It must have connection with top of the screen... some how water do the trick. I was designing custom cover/case for my nook when I discovered it. BTW your finger shod be a bit wet when you use your nook.
Hope it helps!
Thanks
Van
unresponsible touchscreen problem!
vanwaestel said:
Hi All,
Solution for screen as simple as... get tissue, dump it with a bit of water (tap water will do) and clean your screen carefully. Solved Make sure that water gets into corners of screen. There is some kind of filter. It must have connection with top of the screen... some how water do the trick. I was designing custom cover/case for my nook when I discovered it. BTW your finger shod be a bit wet when you use your nook.
Hope it helps!
Thanks
Van
Click to expand...
Click to collapse
Just saw a comment like this on youtube and tried it. It worked! I was so pissed off after so much reset, restart and stuff...! keep it clean! :good:
vanwaestel said:
Hi All,
Solution for screen as simple as... get tissue, dump it with a bit of water (tap water will do) and clean your screen carefully. Solved Make sure that water gets into corners of screen. There is some kind of filter. It must have connection with top of the screen... some how water do the trick. I was designing custom cover/case for my nook when I discovered it. BTW your finger shod be a bit wet when you use your nook.
Hope it helps!
Thanks
Van
Click to expand...
Click to collapse
The Nook doesn't have a capacitative or resistive touch screen, so having a wet finger is irrelevant. Instead, it uses an infra-red touch screen. Between the screen and the grey plastic bezel, you'll see a transparent lens protecting the IR emitters and receivers used to determine finger position. Reportedly, if that gets dirty, it fails to register finger positions.
Hello everyone,
Got a problem with my Galaxy note 3 amoled screen. Couple months ago some lines appeared on that, look like artefacts or dead pixels or something, not really sure. Didn't drop/drop in water the device before that. No idea why that happen. But, they don't go.
Tried some dead pixels apps from market with no success.
Due to certain reasons cannot give the device to repair service, so, need to try to fix that by myself.
OS version is 4.3, if that matters.
Any help will be highly appreciated.
Will attach the screenshot. The line in the middle. Have few of them already. Background is green, to make it more visible.
Thanks!
Shinkoku said:
Hello everyone,
Got a problem with my Galaxy note 3 amoled screen. Couple months ago some lines appeared on that, look like artefacts or dead pixels or something, not really sure. Didn't drop/drop in water the device before that. No idea why that happen. But, they don't go.
Tried some dead pixels apps from market with no success.
Due to certain reasons cannot give the device to repair service, so, need to try to fix that by myself.
OS version is 4.3, if that matters.
Any help will be highly appreciated.
Will attach the screenshot. The line in the middle. Have few of them already. Background is green, to make it more visible.
Thanks!
Click to expand...
Click to collapse
Looks more like heat damage to the screen adhesive than a software/electronic defect, to me. I'm just guessing here, but could it have been left in a spot where a beam of focused light could burn the screen? Mine has a few little defects on the screen from where a water bottle on a window ledge focused the sunlight onto a point on the screen.
factory reset.
Flash stock rom and see .
Thanks for replies guys,
One more thing I probably should mention,
The line on the attached pic is maximized, the real lines are quite small, like 3-5mm length. Really small. But anyway visible...
Jaitsu,
Hmm tried to recall but don't think something like that happened. Sometimes I use my phone as GPS when riding bike, means it's outside under the sun (but not a focused light or something), max. 1 hour per time. Could that be reason?
Also, did you find any way to fix that, by yourself?
I read about several ways to fix screen issues, including leaving phone without battery for some time, or even placing it into the freezer. Tried battery method yesterday with no result, but kind of worry about the freezer...
JJEgan
Yes factory reset is a common advice but you really think it might help? Looks like a hardware issue to me. Can a software glitch damage the display? Also, lines are everywhere on the screen, not like one certain place.
Will give it a try if nothing else found, just, sounds uncommon...
Agree probably hardware but a factory reset rules out firmware .
Thats the first step for a service tech sheet .