Hello,
I have a Telus branded P4000. Since I had It,one LED in the bottom left of the screen that was always full on - so there was a brighter part always on my screen no biggie.
Today I took apart my phone to see why the DPad stopped working. After I put it back together (done it many times before), I noticed my dpad still not working, but my screen was uniform again?!?!?! no one bright LED. Nice. Take what you will from that.
After that my SD card stopped working. Is that a loose connection I can check? which connection would it be? (plan on checking it over again tomorrow).
Also is there a fix for the dpad not working? all the other hardware buttons work, just not the dpad.
I am guessing since you checked the connections that the dpad is just broken and will need to be replaced. Also you have one lcd with a backlight the bright spot is a manufacturing defect not one bright LED. Most of the time the bright spot will come back and get bigger.
yep I think you are right on the nose.
is there anywhere I can get a dpad?
will one from a titan, mogul or 6800 fit into my P4000? I'm guessing so just want to make sure.
and if you have hook ups let me know
Any pad other than a xv6800 pad will work.
thanks go one on order now
So still no d-pad.
Got a brand new one. Still no d-pad, every other button around it works no problem. But the d-pad does nothing. I can feel it push, but nothing happens.
Is this a software issue? I don't want to wast money on this if it's not going to fix it
Related
I don't understand it, the 8525 I have has a blank white screen. I thought the ribbon cable was bad so I ordered a new one, cost me $50, put it in, still the same problem. The motherboard itself is fine, I swapped it into another 8525 and it works with no problems, I swapped a different board into my 8525, and it has the same problem, blank white screen. I checked the LCD and everything, but I don't freakin understand it!! Anyone know what the heck is going on? It's annoying the crap out of me because I can't find the source of the problem.
Have you tried to swap the D-pad controller between those two devices?
shmilson said:
Have you tried to swap the D-pad controller between those two devices?
Click to expand...
Click to collapse
Nope, haven't tried that....but I completely removed the dpad controller and still had the same problem.
Oh and the dpad IS working because I was able to hard reset the device even though I can't see anything....
Is you're void sticker gone? If not I'd say get AT&T to replace it, that's what I did when I had that problem.
Check our USB port and see if it's shorting anything? That's what happened to me. I go the white screen every I plugged in anything into the USB port.
Dpad
After loosing some screws, the problem got better, but still I have some white screens here and there. The d-pad works intermittently. When on a whitescreen, turning the device of, holding the middle D-pad key (or up together sometimes) and turning it on brings back the screen. That's why I'm suspicious about the d-pad controller. In the meantime I'm waiting for a replacement from cnn.cn and will post my results.
shmilson said:
After loosing some screws, the problem got better, but still I have some white screens here and there. The d-pad works intermittently. When on a whitescreen, turning the device of, holding the middle D-pad key (or up together sometimes) and turning it on brings back the screen. That's why I'm suspicious about the d-pad controller. In the meantime I'm waiting for a replacement from cnn.cn and will post my results.
Click to expand...
Click to collapse
I notice that the service manual makes a specific point of noting the d-pad connector must be inserted precisely and with no angle. It is a very small connector and has two tiny screws. It does seem this connection is delicate and might become loose if keys on the d-pad are firmly pressed.
Mike
mikechannon said:
I notice that the service manual makes a specific point of noting the d-pad connector must be inserted precisely and with no angle. It is a very small connector and has two tiny screws. It does seem this connection is delicate and might become loose if keys on the d-pad are firmly pressed.
Mike
Click to expand...
Click to collapse
I did notice it too. After a lot of tries, I got to the optimum on my phone (after the whitescreens started -- probably from a fall), giving a slight torque to the screws but not too much. It's much better then before, but still.. The d-pad pressing actually "fixes" the problem, so I guess that the controller is bad or when I apply some pressure I "fix" this. It's completely random and may be related to temperature (after taking battery out for a long time, problem tends to be less often). In a few days when my controller arrives I'll make sure I screw the connector well and hoping for the best.
When I look at the xilinx(if I remember it right) fpga circuit closely there is a small gap between 2 corners and circuit board. It might be the case that the solderballs under the chip arent soldered that well and when you use D-pad the circuit board bends a bit and in a time the bad solderballs loose connection. The bad thing is that you cant check the solderballs at home (it requires x-ray inspection if you want to keep it in one piece).
FIXED IT!
I fixed it! Well, it's a bit soon to tell it'll keep like that, but after ordering a new d-pad controller from cnn.cn, and taking extra care on installing it as the technical manual says (keeping 90 degrees angle on connection to keyboard), everything is back! No more whitescreens (let's hope it stays that way), ALL buttons are back!
Really need help here,
My hermes suddenly decided that visuals are no longer needed.
That means the screens stays off all the time (yes even in bootloader mode).
It works, receive calls and flashes roms but in no situation can I see anything on the screen (pitch black screen).
I've got no warranty so I took it apart and checked each cable and connector - no issues were seen. I tried changing SPL-s, RUU, Roms all worked but left my tytn with that black screen.
Did anyone see this happen or has any advice?
This sucks big time :-(
No one? Oh man, I guess it's dead then :-(
Last bump before giving up and throwing it away - please?
send it to me if your gonna throw it away : - 0
I've given up on mine as well. It has white screen though. Where do I dump this thing?
If it is out of warrenty, I would take it apart as is sounds like the hardware, check the connections to the LCD. Does the backlight still work, or if you put it in strong sunlight, can you see the LCD working?
My Hermes had a white screen also. I found that if I squeeze the bottom right hand corner whilst resetting it would sometimes work. It seems there is a chip on the switch board that needs the right ammount of pressure on it. I think it was a design flaw as the herm200 and 300 are different. If applying pressure works and you are confident enough take the hermes apart and put a couple of small pieces of plastic or paper between the front buttons and the small square chip on the switch board. This worked for me.
The service guide is available if you google. Let me know if you need more info.
As for the black screen that sounds more serious sorry not seen that one.
what are you guys willing to sell your pdas for? Mine fell in a puddle and i need one for parts. The white screen might be fixable the first couple of times but then it dies off for good, the black screen i've never heard of.
So if you want to sell for a reasonably cheap price let me know, i can buy a new keypad online for $50. So around there would be nice!
i.a.wright said:
My Hermes had a white screen also. I found that if I squeeze the bottom right hand corner whilst resetting it would sometimes work. It seems there is a chip on the switch board that needs the right ammount of pressure on it. I think it was a design flaw as the herm200 and 300 are different. If applying pressure works and you are confident enough take the hermes apart and put a couple of small pieces of plastic or paper between the front buttons and the small square chip on the switch board. This worked for me.
The service guide is available if you google. Let me know if you need more info.
As for the black screen that sounds more serious sorry not seen that one.
Click to expand...
Click to collapse
I just tested this on mine and actually got some results.
mines the opposite though, it will NOT work with any pressure. I left all the screws loose for that board under the buttons, and left the LCD assemble screws out on that end and it works, But if I press the keys it whites out again and won't come back until I repeat the dis-assemble/re-assemble
I had a similar problem but this was after someone dropped mine on the floor. The screen would just be white screen, while everything worked. If I pressed the bottom right of the phone it would sometimes come on and stay on for a little while but would eventually always go to white screen.
I did manage to use the phone but had use a program called Net Control which allowed me to control the phone over WIFI with the phone screen shown on the PC. Got the phone replaced in the end by the people who dropped it.
i got the flex cable and my phone still has the white screen problem....wtf///
Hi mates yesterday i bought a used herm...with excellent condition. but when i opened any dialog. the window closed automatically. and the screen light remains always on. and touch is creating problems.
and after some time the touch screen totally stop working. i dont know what happened. al the buttons are working fine. i upgraded my t-mobile herm to its original t-mobile wm6 rom. and again the touch screen is not working. and the screen light always stay on..
so is this hardware or software problem.?
guide me if you have any clue about this..
according to my thinking.. i think some button is pressed continuesly.. but everything is working fine.. only the touch is not working.
broken digitizer for the touch screen, buy a replacement lcd/digitizer together and replace yourself, about $100Aud. Use Mike Channons site to download the service manual. Use the search function and type in "htc service manual hermes".
As for the light, you will have to use your buttons to navigate to settings>system>backlight>battery power and external power. you can select how long the backlight remains on for.
Cheers...
Hi mate thanks for your reply.. Actually the situation is that. the screen is working perfectly. all buttons are also working perfectly. but suddenly the touch feature stopped working.
that time i was just opening some menus and they closed automatically. it looks like that there is some button pressed. and the screen light never stops. it continuously remains on. all buttons are working perfectly and everything. on the touch feature is not working.
i upgraded my device with genuine shipped t-mobile wm6 rom and again it stopped at the starting screen where i have to click the screen and the device brings the window for stylus adjustment.
so i wanna ask that is this also possible that some touch drivers are corrupted or something like this.? or is this a hardware failure.?
Kind Regards
I had same problem, it was hardware. Thats why I said to change the lcd. It is theoretically possible to replace JUST the digitizer, BUT, it is a MAJOR hassle.
As for getting past the alignment stage, look up Remote Screen Alignment. Its a cab file that stores the alignment settings on your pc. You WILL have to have a friend that has the same phone so you can get their settings as you need to copy them to your pc first. You can then copy the settings to your phone so you can use it until you replace that pesky lcd...
Cheers.....
I had a similar problem with my hermes. After a lot of investigating, I found out that this is a heat related issue with the hermes. The unit will heat up an some connection somwhere gets messed up and continually registers ghost taps on the upper right corner of the screen, which causes the continual opening and closing of programs/task manager. This overloads the phone which then causes the screen to eventually become unresponsive due to excessive computing.
With my phone, it must be heat related because it will only occur during or after heavy use or overcharging. Other people have had this exact problem with the conclusion being overheating. The worse part is, there is apparently no way to fix this, replacing the screen doesn't change anything. setting your screen alignment very far left will fix the problem but then everything you tap needs to be compensated for.
Good luck, hate to be the harbinger of bad news, but it's better to know whats wrong and that you can't fix it then not know whats wrong and keep trying to fix it.
same problem here... only my hermes is overheating already after 5 minutes use...
in the morning it works and when i put it in front of the airconditioning the touchscreen also works...
somebody who has an idea where to look for a solution??
kingsfan said:
same problem here... only my hermes is overheating already after 5 minutes use...
in the morning it works and when i put it in front of the airconditioning the touchscreen also works...
somebody who has an idea where to look for a solution??
Click to expand...
Click to collapse
Some of the suggestions in the white screen thread/s might help. The problem is that those who have the heat related problem will find it very difficult to trace the actual fault. The heat may be causing miniscule expansions on the boards / components and connectors. The tiniest of cracks or poor connections can therefore break with the expansion.
Another theory is that rather than heat it might be a capacitor that is breaking down either over time or again through heating. Unless you are a skilled electronic engineer that is virtually impossible to check, particularly since schematics are not available.
You might just be lucky if you dismantled and re-assembled - it might just re-set a connector or adjust a board so it does not get affected in future. That would be very much a matter of luck and of course potentially the situation might be made worse!
Mike
Hi mates. I am back with some issue.. i moved my device to a repair center and he said that its a software issue. and he fixed my device without changing any rom.. i dont know how..
but again when i open some window like programs. the right scrollbar make a problem... when i move scrollbar it automatically press the top close button..i aligned my screen 3 times but same problem with right side scroll bar.
and after playing with it. the touch totally stopped.
now the thing is.all the buttons are working fine and everything is working fine. even sms and calls. but when i check sms and press my scroller button. it displays the right click menu instead of opening the sms. and the screen light is continuesly on. as something is pressed. so. i think this thing wil help. i am now trying this method to check my pc.
http://inuchanbt.blog54.fc2.com/blog-entry-99.html
check this out as well.
i will send you details soon.
might just have something lodged between the case and screen.. also to get rid of the screen alignment, cable it up and delete welcome from the startup programs and then reset it.. should get you past it so at least you can use it until you repair your screen
Well, plain and simple is that my touchscreen doesn't response to any touch reponse but the screen is working and everything else
I recently bought a white G1 housing kit on ebay and decided to take the risk of opening up my G1 to replace the housing of my black G1 to the white one, but turns out the white case for the screen / menu buttons arent correct so i scraped those and just changed the keyboard and menu button keys to white and put everything back together properly and exam each part and etc.
so i put everything back together and turn on the g1 everything works fine but the touchscreen doesn't work, is there anyway i can fix this?
life is hard using the G1 without a working touchscreen lol
thanks again and i don't think my screen is defective just wondering why it doesn't reponse to my touch
thanks
Once I was walking around in the heat with my G1 in my BDU pocket for like 4 hours, and it obviously got really humid in my pocket, and my touchscreen stopped responding. I let the phone just sit off for a while and after about an hour sitting in my room, it started working again. But I've had several instances where the touch screen has been less responsive/not responsive.
My guess based off my experience would be that some ambient moisture may have gotten into the phone when you opened it up. How long has it been since you put it back together?
Any update on this?
you said you had 2 g1s, right? so take the phone apart again and replace the touch screen.
the touch screen is separate from the LCD, so that wont affect it.
I had my evo's (003) touch screen die where the main screen didnt light up but the buttons did. I couldnt see anything on the phone but it did work and I could make calls with bluetooth etc.. SO, I took the phone into the store and they replaced the entire screen which includes the front buttons and side volume rocker etc.
HOWEVER, now the bottom buttons (home, back etc) do not work. Has anyone had this issue? Im taking it back for them to put ANOTHER screen on.. I did find this video of almost the same issue I am having:
Im wondering if other had this issue and if there might be a bad batch of replacement panels... The service tech told me I needed to hard reset to get the buttons working and I did and same issue....
Thanks....
I have had that happen before even white spots on screen and where it became unresponsive to touch locked up. Had it swapped out and the new one had the screen coming apart. Then the next one wasn't glued on right windex got on the lcd. Got my phone from Asurion and they sent me one with glue all over messed up charger port and the screen had 15 lines running str8 down the center.
I have no idea why but I believe there is a bad batch of panels still running around. Now I have a brand new 0004 evo Asurion gave me after I called and talked to them takes awhile to get through to someone. But worth the 100.
Sprint store always gave me refurbs with big issues always such as screen issues and broken volume button and camera issues.