Very good MMS CAB
* You can send and receve up to 300 KB.
* work very good in VGA screen.
* Give you new options (New>MMS or Video Message or SMS).
Arcsoft_mms_507024_B_6.zip (Old)
New Update:
Arcsoft MMS 5.2.0.22 VGA.zip
New Update: (You must install V 52022 First then install this)
Arcsoft MMS 5.2.1.37.cab
Sorry for any wrong info
Hi,
I don't think it's the last build ! I have the 5_2_2_37 !
using 5.2.1.22 and it gives me threaded SMS and MMS but incoming pics are very small! on Alltel with energy ROM
Yea this is a old build.
Doesn't work with any ppc, it doesn't work with mine....
CDMA htc touch vouge, Bell ..
WM 6
XQ55 said:
New Update: (thanks for Nixeus for his info)
Just for QVGA
Arcsoft MMS 5.2.7.37.cab
Click to expand...
Click to collapse
the cab file is labelled 5.2.1.37, the MASD registry entry claims 5.2.2.37
anyway, this is 5.2.3.22R1 extracted from DA_G's HTC_MEGA packages post
Request a CAB file of ArcoSoft 5.2.3.22R1 extracted from DA_G's HTC_MEGA
selyb said:
the cab file is labelled 5.2.1.37, the MASD registry entry claims 5.2.2.37
anyway, this is 5.2.3.22R1 extracted from DA_G's HTC_MEGA packages post
Click to expand...
Click to collapse
I want the last build cab for wvga.
Can you upload...?
jeffreyljb said:
Request a CAB file of ArcoSoft 5.2.3.22R1 extracted from DA_G's HTC_MEGA
Click to expand...
Click to collapse
http://home.comcast.net/~selyb/XDA/Messaging_Client_Arcsoft(5.2.3.22R1).cab
selyb said:
http://home.comcast.net/~selyb/XDA/Messaging_Client_Arcsoft(5.2.3.22R1).cab
Click to expand...
Click to collapse
This is QVGA device software package.
Can you give me WVGA version?
Thank you indeed,my dear friend,unfortunately installation failed at the beginning...
selyb said:
http://home.comcast.net/~selyb/XDA/Messaging_Client_Arcsoft(5.2.3.22R1).cab
Click to expand...
Click to collapse
taox said:
This is QVGA device software package.
Can you give me WVGA version?
Click to expand...
Click to collapse
sorry, I have only QVGA
jeffreyljb said:
Thank you indeed,my dear friend,unfortunately installation failed at the beginning...
Click to expand...
Click to collapse
I will have time tomorrow to try to convert it again
selyb said:
sorry, I have only QVGA
I will have time tomorrow to try to convert it again
Click to expand...
Click to collapse
Thx! You are a good guy!
Good luck!
Thank you.
selyb said:
sorry, I have only QVGA
I will have time tomorrow to try to convert it again
Click to expand...
Click to collapse
ok, fixed and uploaded again (QVGA only)
http://home.comcast.net/~selyb/XDA/Messaging_Client_Arcsoft(5.2.3.22R1).cab
Got it and works perfect,thanks once again.
selyb said:
ok, fixed and uploaded again (QVGA only)
http://home.comcast.net/~selyb/XDA/Messaging_Client_Arcsoft(5.2.3.22R1).cab
Click to expand...
Click to collapse
thx!
wvga....
Which version should I download for WVGA (Topaz)?
not the one I posted
Working with WVGA!
1) install Arcsoft MMS 5.2.0.22 VGA.zip in internal memory
2) install Arcsoft MMS 5.2.1.37.cab still in internal memory
3) edit servers in MMS option, setting up your new default server (the others can be deleted)
That's it
Related
because i didn't found a version of htchome with weather working through gprs/3g data or wap connection...
here is a "proxified" version with 2 other options that should make it work
for now, these options are customisable only via the registry:
[HKLM\SOFTWARE\HTC\HTCHome\Weather\Settings]
"ProxyType"
0 = auto proxy config (system config*)
1 = direct to net (without proxy, default)
3 = via named proxy
"Proxy"
named proxy, IPORT (only used if "ProxyType"=3)
"User-Agent"
user-agent of the request
(the default user-agent is sent if leaved blank)
"Url"
url of the weather server (must begin with "http:" and without parameters. the parameters will be appent to it after a '?')
(the default url is used if leaved blank)
*i noticed that the autoproxy option forces the program to take pie proxy config, so pie should be at least launched once.
English version 1.5 :
http://rapidshare.com/files/87446261/HTCHomeProxy0409.cab.html
French version 1.5:
http://rapidshare.com/files/86367620/HTCHomeProxy.cab.html
English version 2.1:
That sounds great. Is there a way to patch the already installed HTC home ?
Hey thnx, it works great! No more switching between internet connections for the weather report!
I do have a question though. This new HTCHome is shown with standard options. If I change options these are reflected in the registry, but not on the screen. It looks like I change options for my original HTCHome but the one that is shown is the new HTCHome. Is there anywhere where I can change options for the newly installed HTCHome?
firiel said:
That sounds great. Is there a way to patch the already installed HTC home ?
Click to expand...
Click to collapse
Been waiting for this... Excellent job!!!
I second that question. Would love to keep the new one I have now.
i don't know if you can patch yourself you already installed version because of the different signatures
i took this "standard" version because it's the first i found..
but just tell me where i can find the best or the latest version to patch it
i know the "HTCHome.dll" is different on each version so i can't give you a specific upgrade
idsk said:
i don't know if you can patch yourself you already installed version because of the different signatures
i took this "standard" version because it's the first i found..
but just tell me where i can find the best or the latest version to patch it
i know the "HTCHome.dll" is different on each version so i can't give you a specific upgrade
Click to expand...
Click to collapse
There you go:
http://forum.xda-developers.com/showthread.php?t=344533
You can find the latest version there. Guys correct me if i'm wrong.
HTC Home v2_1_1005722_s0 + HTCHomeSettings.dll (JUVS, 2007-11-15)
Thanks again
I just re edited this msg and dont know what to write
so ...
YOU ROCK DUDE !_!
After installing the WM5SEr5 ROm on Wizard (AKU3.3) Weather now updates via GPRS as well. With the standard (or N2A patched) HTCHome.
Didnt work on previous WM5SEr4 (AKU2.3)
I confirm it's working great via GPRS/3G.
One thing that changed is that now on the Today screen there's always a clock, which I don't really need. I've been using a battery indicator with percentage, and now it has disappeared.
Maybe using the latest version will fix this.
Thanks again
yes, i don't know why but that cab changed that
[HKLM\SOFTWARE\Microsoft\Shell]
ShowTitleBarClock = 0
KamaL said:
Been waiting for this... Excellent job!!!
I second that question. Would love to keep the new one I have now.
Click to expand...
Click to collapse
Thanks idsk for the patched files. Nice work! I have it working with a cooked home plugin using his patched htchome.dll and idskpxy.dll files form v2.1 with the metioned aboved registry settings with the At&t Tilt (Kaiser). idsk if you don't mind, I can post this cab for others. Again thanks, I now have it working with T-zones 5.99 proxy.
phouki said:
Thanks idsk for the patched files. Nice work! I have it working with a cooked home plugin using his patched htchome.dll and idskpxy.dll files form v2.1 with the metioned aboved registry settings with the At&t Tilt (Kaiser). idsk if you don't mind, I can post this cab for others. Again thanks, I now have it working with T-zones 5.99 proxy.
Click to expand...
Click to collapse
Do you mean you were able to patch the htchome found in a cooked ROM? Hwo did u do that?
KamaL said:
Do you mean you were able to patch the htchome found in a cooked ROM? Hwo did u do that?
Click to expand...
Click to collapse
I re-made a cab with just the htchome.dll and idskpxy.dll and the proxy registries.
I have attached the cab so you can download here.
[EDIT] Attached file for early home versions.
Cab's can be found here:
http://forum.xda-developers.com/showthread.php?t=371591
phouki said:
I re-made a cab with just the htchome.dll and idskpxy.dll and the proxy registries.
I have attached the cab so you can download here.
Click to expand...
Click to collapse
Do I have to install this when using the HTChome posted by idsk, or it works on all other HTChome versions??
Thanks. Does it support proxy with authentication (login + password) or proxypac ?
KamaL said:
Do I have to install this when using the HTChome posted by idsk, or it works on all other HTChome versions??
Click to expand...
Click to collapse
It should work on HTC Home v2.1. The rom i'm using has v2.1 on it.
Salvatore2008 said:
Thanks. Does it support proxy with authentication (login + password)
Click to expand...
Click to collapse
non desolé.. i don't know how to add that
Salvatore2008 said:
or proxypac ?
Click to expand...
Click to collapse
for the proxycap i don't know if it's taken when it's in autoproxy mode, just try to set the path to the pac file in the "ProxyServer" in "HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings"
(the path must be in a valid protocol so it must begin with "http://" if on the net or "file://" if in local). i don't know if it works but it's just to try
phouki said:
It should work on HTC Home v2.1. The rom i'm using has v2.1 on it.
Click to expand...
Click to collapse
if you got a htchome preinstalled in a previous version, don't forget to backup your HTCHome.dll before installing this upgrade, just in case if it's not compatible, but normally it should work because only that file is the plugin so..
thx phouki
Ok, I tried the patch from phouki on the original HTChome, and it works just fine!! So no need to replace the whole plugin.
@idsk - I think you should post this (both cabs) in the Development and Hacking section in the main forum. I'm sure many people will love it.
Thanks both of you guys - great contribution to the community!!
Thanks very much, this was something I was really looking for.
Now if I could find a proxy enabled live messenger !!!
firiel said:
Thanks very much, this was something I was really looking for.
Now if I could find a proxy enabled live messenger !!!
Click to expand...
Click to collapse
idsk is working on a proxy enabled version of Fring, which also includes MSN messenger
new rom from pdaviet: http://www.pdaviet.net/member.php?u=3..link in rapidshare is here http://rapidshare.com/files/123122438/POLARIS_WM6.1_v1.52.61.20_B19214.7z pass is PhamQuang
pafimal said:
new rom from pdaviet: http://www.pdaviet.net/member.php?u=3..link in rapidshare is here http://rapidshare.com/files/123122438/POLARIS_WM6.1_v1.52.61.20_B19214.7z pass is PhamQuang
Click to expand...
Click to collapse
Actually the link is doesnt accessable for non-members. This link should work http://pdaviet.com/showthread.php?t=27667.
POLARIS WM6.1 ROM V20 - Build 19214.1.0.4
pafimal said:
new rom from pdaviet: http://www.pdaviet.net/member.php?u=3..link in rapidshare is here http://rapidshare.com/files/123122438/POLARIS_WM6.1_v1.52.61.20_B19214.7z pass is PhamQuang
Click to expand...
Click to collapse
Hi pafimal, you beat me to the post..
Just downloaded and testing, a few bugs so far.
1-Double entry for TouchFLO in settings screen.
2-No finger scroll in contacts.
Seems OK at present, I was using V17 (POLARIS_WM6.1_v1.52.61.17_B19588) as I found V18 a little quirky.
How to change clock to white face
Does anyone know how to change the clock face to white on the PDAViet releases?
Thanks all..
Are there any changelog or a list which packages are included? Obviously he switched to an older build ( 5.2.19214 Build 19214.1.0.4 )...
greets
Tom
gadjet said:
Does anyone know how to change the clock face to white on the PDAViet releases?
Thanks all..
Click to expand...
Click to collapse
with total comander copy-paste this to windows registryView attachment 93402
gadjet said:
Hi pafimal, you beat me to the post..
Just downloaded and testing, a few bugs so far.
1-Double entry for TouchFLO in settings screen.
2-No finger scroll in contacts.
Seems OK at present, I was using V17 (POLARIS_WM6.1_v1.52.61.17_B19588) as I found V18 a little quirky.
Click to expand...
Click to collapse
finger scroll in contacts works perfect for me
Thanks..
pafimal said:
with total comander copy-paste this to windows registryView attachment 93402
Click to expand...
Click to collapse
Thanks for that pafimal.
The zip file contained files for the HHC customiser program not the registry setting?
Thanks..
pafimal said:
finger scroll in contacts works perfect for me
Click to expand...
Click to collapse
Re flashing again to see if finger scrol works..
Video Calling and FM Radio not working.
PhamQuang WM6.1 ROM V20
pafimal said:
new rom from pdaviet: http://www.pdaviet.net/member.php?u=3..link in rapidshare is here http://rapidshare.com/files/123122438/POLARIS_WM6.1_v1.52.61.20_B19214.7z pass is PhamQuang
Click to expand...
Click to collapse
Hi again pafimal.
Could you rename this thread to PhamQuang WM6.1 ROM V20 - build 19214.1.0.4 or
POLARIS WM6.1 ROM V20 - Build 19214.1.0.4 to save duplicate threads?
Cheers..
No finger scrolling still.
Re-flashed again and still no finger scrol in contacts, ok everywhere else.
Diden't need to re-flash murta radio this time?, not sure why?
Can anyone confirm if
1. Radio FM
2. Audio Manager
is working
chand4u76 said:
Can anyone confirm if
1. Radio FM
2. Audio Manager
is working
Click to expand...
Click to collapse
radio FM and Audio Manager works perfect to my polaris
gadjet said:
Hi again pafimal.
Could you rename this thread to PhamQuang WM6.1 ROM V20 - build 19214.1.0.4 or
POLARIS WM6.1 ROM V20 - Build 19214.1.0.4 to save duplicate threads?
Cheers..
Click to expand...
Click to collapse
this is my first thread and i dont know how this rename,if you know fix it
gadjet said:
Thanks for that pafimal.
The zip file contained files for the HHC customiser program not the registry setting?
Click to expand...
Click to collapse
im sorry for the post here it is View attachment 93406
Thanks
pafimal said:
im sorry for the post here it is View attachment 93406
Click to expand...
Click to collapse
Cheers anyway pafimal, still same HHC customiser files.
Managed to find a cab file that does it all, so find attached HTC_iDiamond.cab with a before and after picture.
hi gadjet with total comander copy paste theese files in my attachment to the folder of windows my clock face is turned in white colour just in your second picture
Total commander
pafimal said:
hi gadjet with total comander copy paste theese files in my attachment to the folder of windows my clock face is turned in white colour just in your second picture
Click to expand...
Click to collapse
Cheers pafimal, diden't have total comander. Thanks again...
Edit:
Found it http://www.ghisler.com/pocketpc.htm
I don't see the thread at PDAVIET, anyone knows if it's been deleted?
In the Diamond forum there's a rom called "Dutty 3.3" that comes with this version of Opera.
http://forum.xda-developers.com/showthread.php?t=411707&goto=newpost
They made a .CAB file with the QVGA version and published a *limited* Rapidshare link, so nobody will be able to download it anymore. We are requesting a NEW download link to distribute it right.
The original thread is this:
http://forum.xda-developers.com/showthread.php?t=450141&goto=newpost
Please, encourage the cooker to release this build so we can enjoy it! We're in XDA-Developers to share, not to protect. Since not everybody has a HTC Diamond, not everybody could flash that ROM with the new Opera build.
where is the vga at lol
From laser21 in Dutty's 3.3 for Diamond thread is http://www.megaupload.com/?d=WD51VD4W, which does not install on anything other than Dutty ROMs.
However, sadthai created a great cab that installs on any ROM (even if you have to edit the settings to turn off Mobile View...):
sadthai said:
i just put together a cab of 2808 that can be installed on all devices/rom.
you guys can get it here:
http://www.megaupload.com/?d=LP4ZQZHM
qvga and for device installation only.
Click to expand...
Click to collapse
The Diamond is VGA so there should be a VGA version aswell.
vpoet said:
From laser21 in Dutty's 3.3 for Diamond thread:
http://www.megaupload.com/?d=WD51VD4W
This does NOT install on any ROM other than Dutty's 3.3, apparently. How horrible is that?
Click to expand...
Click to collapse
I don't know why, but I can confirm that when I tried to install it, a messange popped up saying:
"Setup failed"
"Unable to install Opera Mobile 9.5. The device does not have a valid ROM version".
Is this binded in any way to that ROM??
running on my orbit2 very fast but flash not working.
just unpack the cab and upgrade the exe's should work fine for qvga and vga
chrisd1a1 said:
running on my orbit2 very fast but flash not working.
just unpack the cab and upgrade the exe's should work fine for qvga and vga
Click to expand...
Click to collapse
How did you extract it? I opened the file with 7-zip and the names are similar, but somewhat encoded.
i just put together a cab of 2808 that can be installed on all devices/rom.
you guys can get it here:
http://www.megaupload.com/?d=LP4ZQZHM
qvga and for device installation only.
i still prefer 2520 much better.http://forum.xda-developers.com/showpost.php?p=2944846&postcount=221
VGA or QVGA?
sadthai said:
hey i just put together a cab of 2802 that can be installed on all devices/rom.
you guys can get it here:
http://www.megaupload.com/?d=DSIGWGFN
for device installation only.
i still prefer 2520 much better.http://forum.xda-developers.com/showpost.php?p=2944846&postcount=221
Click to expand...
Click to collapse
Thanks a lot! I'm installing it at the moment.
A error message has appeared, but I think it's because OperaL.exe is running. I will kill it using some process manager and retry.
varaff said:
VGA or QVGA?
Click to expand...
Click to collapse
this is qvga version
try this VGA version:
http://rapidshare.com/files/167802493/WM6_PPC_HTC_Opera9_WWE_2808.CAB
I haven't install the cab, just copy the 4 new files to \windows, and it works like a charm
Does anyone know if this is in line with the 1957 version or the 23xx version???
Does anyone have the two opera files to upgrade for QVGA?
The reason why I ask what version. Is because I have tried to upgrade 1957 with 23xx versions and they just freeze. So there is obviously two separate builds.
BTW, I have the 2520 for 1957 already. Thanks
is there a wvga version?
that rapid link no longer available
http://www.megaupload.com/?d=WD51VD4W
Heres the CORRECT download link for Opera Mobile 9.5 Build 2808 QVGA
ranmasaotome510 said:
http://www.megaupload.com/?d=WD51VD4W
Heres the CORRECT download link for Opera Mobile 9.5 Build 2802 QVGA
Click to expand...
Click to collapse
Edit * Alrite, so it is the right version, but i got the Incorrect Rom Version Error XD, My mistake
sadthai said:
hey i just put together a cab of 2802 that can be installed on all devices/rom.
you guys can get it here:
http://www.megaupload.com/?d=DSIGWGFN
for device installation only.
i still prefer 2520 much better.http://forum.xda-developers.com/showpost.php?p=2944846&postcount=221
Click to expand...
Click to collapse
is it uninstallible??? cuz some of the newer versions dont show on the remove programs page
mike21pr said:
is it uninstallible??? cuz some of the newer versions dont show on the remove programs page
Click to expand...
Click to collapse
the cab that i put together, it is removable/uninstallable.
ranmasaotome510 said:
Edit * Alrite, so it is the right version, but i got the Incorrect Rom Version Error XD, My mistake
Click to expand...
Click to collapse
get the cab in post #8. it works under all devices(qvga).
Y need to be rush? while that will be eventually released by someone, just be patient.
hi folks, hope someone han help with this.
i'm trying to cook in the latest version of swype (cabbed by lord yuz. from a 'certain' site)
i've converted the cab to an ext but even though it builds it's not opening the keyboard. i can't see what i'm doing wrong but if anyone has a working package or any ideas what i'm missing i'd be grateful
thanks
Chris
You need to replace 'ModelName.txt' in Operatorpkg with a T-Mob modelname.
chrisd1a1 said:
hi folks, hope someone han help with this.
i'm trying to cook in the latest version of swype (cabbed by lord yuz. from a 'certain' site)
i've converted the cab to an ext but even though it builds it's not opening the keyboard. i can't see what i'm doing wrong but if anyone has a working package or any ideas what i'm missing i'd be grateful
thanks
Chris
Click to expand...
Click to collapse
Laurentius26 said:
You need to replace 'ModelName.txt' in Operatorpkg with a T-Mob modelname.
Click to expand...
Click to collapse
thats what i initially thought from earlier versions but i understood this version was cracked to avoid that requirement?
thanks for the advice mate, i'll give it a go
If you are using ervius kitchen, and you created the EXT from the CAB,
normally on your app.dat file you will have only "Directory("\Windows\Swype...")"; try to exchange all of them with the equivalent like "Directory("\Program Files\Swype...")" the problem is that you will have a duplicate of all your file (each in windows directory and also in program files\swype directory).
To make it your default SIP use this reg key in your app.reg.
[HKEY_CURRENT_USER\ControlPanel\Sip]
"DefaultIm"="{7D51A54F-14D0-4eda-AC8D-0AE175C344E8}"
I hope it will help you.
solidpowder said:
If you are using ervius kitchen, and you created the EXT from the CAB,
normally on your app.dat file you will have only "Directory("\Windows\Swype...")"; try to exchange all of them with the equivalent like "Directory("\Program Files\Swype...")" the problem is that you will have a duplicate of all your file (each in windows directory and also in program files\swype directory).
To make it your default SIP use this reg key in your app.reg.
[HKEY_CURRENT_USER\ControlPanel\Sip]
"DefaultIm"="{7D51A54F-14D0-4eda-AC8D-0AE175C344E8}"
I hope it will help you.
Click to expand...
Click to collapse
cheers mate, i've tried the modelname and no joy the ext i'm using is writing to the windows directory, i've edited all the paths but no joy on it working. also it's not duplicating the files.
i've cooked in nuesipdefault so swype is selectable. gives the option to choose.
any other ideas from anyone as i'm really stuck with this
maybe you will need also this on your app.reg
[HKEY_CURRENT_USER\Software\Swype]
"DataDir"="My Documents"
"FirstTime"=dword:1
"InstallDir"="\\Program Files\\Swype"
Swype is one of those apps that cant be set only in windows... sorry bud but it seems that some paths are hardcoded inside the exe file not just in regs, i tried sometimes and cant make it works just in windows\
solidpowder said:
maybe you will need also this on your app.reg
[HKEY_CURRENT_USER\Software\Swype]
"DataDir"="My Documents"
"FirstTime"=dword:1
"InstallDir"="\\Program Files\\Swype"
Click to expand...
Click to collapse
+ Que PPC said:
Swype is one of those apps that cant be set only in windows... sorry bud but it seems that some paths are hardcoded inside the exe file not just in regs, i tried sometimes and cant make it works just in windows\
Click to expand...
Click to collapse
cheers folks, i'll give this a try tonight and see what happens, fingers crossed.
failing that if anyone has a working ext package for Swype v3.19.20.20.6343
i'd be very grateful for a share
im using this package and it workes for me. i remove the video, french, italien and spanish language
http://rapidshare.com/files/388900459/Swype_3_19_20_20_6343_0.7z.html
password: xda-devs
chrisd1a1 said:
cheers folks, i'll give this a try tonight and see what happens, fingers crossed.
failing that if anyone has a working ext package for Swype v3.19.20.20.6343
i'd be very grateful for a share
Click to expand...
Click to collapse
ratelutz said:
im using this package and it workes for me. i remove the video, french, italien and spanish language
http://rapidshare.com/files/388900459/Swype_3_19_20_20_6343_0.7z.html
password: xda-devs
Click to expand...
Click to collapse
cheers man, will give it a try
edit: this works. thank you, thank you thank you
hey chris... the cab you sent me is only for big ressource not all res allowed and i dont have langs BTW its overlapped in the softkeybar , does this in RS is compatible with all the resolutions?
Oh forget it the link is dead now
if this doesn't work try the swype packages from chucky kitchen (hd2 rom) that must work.
ratelutz said:
im using this package and it workes for me. i remove the video, french, italien and spanish language
http://rapidshare.com/files/388900459/Swype_3_19_20_20_6343_0.7z.html
password: xda-devs
Click to expand...
Click to collapse
link isn't working anymore. any chance someone could repost?
I would love this link also.
here you are
after trying all the different cabs and ext packages of swype that I could find,
none of them worked when cooked, so I decided to play around with the files from
3 different downloads. I finally managed to create a package that works with
osKitchen for the HD2 - Leo. just extract to your EXT Packages folder.
DOWNLOAD REMOVED - DUE TO XDA RULES
Farsite said:
after trying all the different cabs and ext packages of swype that I could find,
none of them worked when cooked, so I decided to play around with the files from
3 different downloads. I finally managed to create a package that works with
osKitchen for the HD2 - Leo. just extract to your EXT Packages folder.
Click to expand...
Click to collapse
You have mixed up the previous version with the new one?
I have checke the package and there are a lot of different in the basic keyboard files.
totalcmdext said:
You have mixed up the previous version with the new one?
I have checke the package and there are a lot of different in the basic keyboard files.
Click to expand...
Click to collapse
yeah, its a combination of the Fixed.Blackbird cab and the EXT package with NL patch that can be found on the forums. it works perfectly on my HD2 when cooked using oskitchen.
Can someone tell me howto resolve the blank space as in attached image?
As you can see this happens in a Dutch ROM, issue doesn't appear in WWE version of the same ROM
Here's the solution with thanks to DiegisOn:
Diegis0n said:
I edited the 0413.mui file and it works !!
I'll upload it
http://rapidshare.com/files/392988811/SettingImprovement.exe.0413.mui
Click to expand...
Click to collapse
patensas said:
Can someone tell me howto resolve the blank space as in attached image?
As you can see this happens in a Dutch ROM, issue doesn't appear in WWE version of the same ROM
Click to expand...
Click to collapse
Will check on my NLD rom if this is also happening
Diegis0n said:
Will check on my NLD rom if this is also happening
Click to expand...
Click to collapse
If not i hope you can supply the solution to
patensas said:
If not i hope you can supply the solution to
Click to expand...
Click to collapse
It's also blank in mine
2 ways to fix it:
- Use the latest "SettingImprovement.exe.0409.mui" and rename to 0413 <-- my advise
or
- Use the "Settings_Improvement_1_0_19211330_06" from the stock 1.66 NLD rom
It's probably due to the fact that you're using a 0413.mui that doesn't fit the newer package
(Just like QuickGPS, Voice Recorder and some others ...)
Diegis0n said:
It's also blank in mine
2 ways to fix it:
Click to expand...
Click to collapse
My guess would be there's a manila file that's missing a translation or something since documents tab isn't officially released in Dutch.
Will try your suggestion in a bit.
What other packages suffor the same issues with 0413 problems?
I know about g-sensor calibrator, QuickGPS and Voice recorder and you know about more?
patensas said:
My guess would be there's a manila file that's missing a translation or something since documents tab isn't officially released in Dutch.
Will try your suggestion in a bit.
What other packages suffor the same issues with 0413 problems?
I know about g-sensor calibrator, QuickGPS and Voice recorder and you know about more?
Click to expand...
Click to collapse
Exaclty, but what file Just like the text below the docs icon while scrolling tabs ...
As to other 0413 issues, G-sensor completes the list afaik the other langs is another story ...
Diegis0n said:
Exaclty, but what file Just like the text below the docs icon while scrolling tabs ...
As to other 0413 issues, G-sensor completes the list afaik the other langs is another story ...
Click to expand...
Click to collapse
Oh well the text below the docs icon was of no issue and i found it in a flash, just can't seem to find the file for the blank.
patensas said:
Oh well the text below the docs icon was of no issue and i found it in a flash, just can't seem to find the file for the blank.
Click to expand...
Click to collapse
I think i'm on to something about that blank field
Diegis0n said:
I think i'm on to something about that blank field
Click to expand...
Click to collapse
And you want to share that info?
patensas said:
And you want to share that info?
Click to expand...
Click to collapse
Of course ! If it works
Edit: cooking
Diegis0n said:
Of course ! If it works
Edit: cooking
Click to expand...
Click to collapse
Can't wait to hear if it works since this is the only "issue" i've found in my latest rom
The other options you've mentioned also work but that leaves us without the shortcut for Documents tab settings.
patensas said:
Can't wait to hear if it works since this is the only "issue" i've found in my latest rom
The other options you've mentioned also work but that leaves us without the shortcut for Documents tab settings.
Click to expand...
Click to collapse
I edited the 0413.mui file and it works !!
I'll upload it
http://rapidshare.com/files/392988811/SettingImprovement.exe.0413.mui
Diegis0n said:
I edited the 0413.mui file and it works !!
I'll upload it
http://rapidshare.com/files/392988811/SettingImprovement.exe.0413.mui
Click to expand...
Click to collapse
You're the man, cooking this very moment
What program do you use to edit mui files?
patensas said:
You're the man, cooking this very moment
What program do you use to edit mui files?
Click to expand...
Click to collapse
I use Restorator.
PS: can you show me how to have the text below the icon?
Diegis0n said:
I use Restorator.
PS: can you show me how to have the text below the icon?
Click to expand...
Click to collapse
I've edited the 26948339_manila file in Manila Core folder which was the easiest way to solve it for me since i only cook in Dutch.
patensas said:
I've edited the 26948339_manila file in Manila Core folder which was the easiest way to solve it for me since i only cook in Dutch.
Click to expand...
Click to collapse
So simple Thanks!
Diegis0n said:
So simple Thanks!
Click to expand...
Click to collapse
You're welcome and ofcourse thank you for editing the mui file for me
Happy ending huh? added into the fixes stickie thread
+ Que PPC said:
Happy ending huh? added into the fixes stickie thread
Click to expand...
Click to collapse
And they cooked happily ever after ...