Hi Guys
I've done searches to find a solution, but I can't find any.
I flashed my gene (have done many times before). Somehow got things mixed up. And now it doesn't even want to go into bootloader.
Try rebooting, power button does nothing. When I hold "camera" button and reset the green & red buttons flash then nothing.
I have tried soft & hard reset, nothing works. Screen just stays blank.
Please help, I'm really in trouble.
Regards
Celliers
Sometimes this problem happens with me. You have to remove battery and press the power button sometimes (without battery), then put back battery and power on your gene. After this, try to go into bootloader mode and flash another rom.
Related
Guy,
Please Help
I was upgrading my XDAIIi to Xda IIi ROM v 1.11.162. during which it show an error message and it just went blank looking closely at the screen showing USB at the top of the screen and the bottom of it has v1.01,
when put on the cradle it showing USB.
I have press the reset botton God knows how many times
Please help someone
Were you trying to upgrade to the rom I posted? With RADIO 1.03 in the filename?
You need to press the power, d-button down and the reset button all together.
Then run the update program again. If it is the original O2 rom then it should work fine from there. If it is the rom I posted then the update will fail initially, just run the program a second time without touching your phone at all.
Hope this helps.
No, I am upgrading from O2 website. I am sorry it not connecting to my pc at all. No sign of life ,
it only display USB on the screen
Try doing a hard reset by holding the power button down and pressing the reset button.
Put it into bootloader by pressing the power, d-button down and the reset button all together and releasing them at the same time. The screen should say SERIAL. Connect it to your PC and the screen should then say USB. Then you should be able to run the update.
If this doesn't work as a last resort try taking the battery out for a while to let the backup run down and start again. Whatever happens the phone needs to go into bootloader mode and a rom applied to get it working again.
Please, which is the D-botton you are refering to
The D button is the "Directional" button, in between the green pickup phone button and the red hang up button.
Hello
I took my friends xperia to install some applications when it happens this:
After i installed AEK software Keyboard Mapper the system asked me to soft reset the device to apply some settings.(The device during this procedure was connected via usb with the pc)
I press "yes" and as usual at the start up appears the sony ericsson logo then the experia logo and finally the device is active.But in my case the phone when it comes to the experia logo freezes..The screen remains illuminated but blank and when iam touching the screen(which is blank) i can hear the sounds of clicking.In this state if i want to shut down the device the only method is to take off the battery.I tried to hard reset the device(when its closed) but unfortunately it wont allow me to do so(i tried with all the possible ways to hard reset the device).At first i thought that the device had hasnt too much battery.I fully charged it and i tried again getting the same results.Please, can anyone tell me what to do?
Edit: After several tries it came up this message "The device is unable to boot because either you have turned off the device incorrectly or tries to install an application from untrusted source.Press volume up to reset or press any other button to cancel etc" Iam pressing the volume up button but nothing happens.Please can you tell me how to hard reset the device?
Here is a link to soft/hard reset tutorial
Hi
I assume you have removed and reinserted the battery?, try this first, if that doesn't work go here.
http://www.xperiax1.net/forum/xperia-x1/546-tutorial-soft-hard-resets.html
P.S This took me 10 seconds to find on google
Ian
Might have to hard reset, if you didn't install a safe mode boot program.
Ianmrr said:
Hi
I assume you have removed and reinserted the battery?, try this first, if that doesn't work go here.
http://www.xperiax1.net/forum/xperia-x1/546-tutorial-soft-hard-resets.html
P.S This took me 10 seconds to find on google
Ian
Click to expand...
Click to collapse
Thanks Ian but apparently you didnt read all the lines i wrote.I said "i tried to hard reset the device with all the possible ways but didnt work" including this way you send me.Thanks anyway
Problem solved
Doing this:
without using the stylus is to switch off the phone,
hold down right and left button (under the screen)
while holding down switch on the phone
release the switch button while holding the two others
then a grey screen must appear saying to push "r" to hard reset or "x" to cancel
push "r" on the keyboard and you're done
I had followed all key combinations I found in every forum but I couldn't hard reset my HTC until I tried to find my own combinations and succeded. What I did is hold the green and the main buttons while pressing the soft reset button and the screen went blue for a second and immediately the system restarted whitout asking for any confirmation. Hope it helps someone else.
Hello,
I wanted to ask if someone clashed with problem like that and knows how to solve it. I had 1.66 rom eastern euope and installed 2.08hspl, tried to install latest magldr and I am guessing problem occured because I didnt installed latest radio. Now when I am turning on the phone it shows white screen and green logo and stuck. Tried turning of the phone and holding - volume button when turning on that didnt make any difference can someone help me to revive my phone ?
So you tried to get into bootloader, but the thing is you have to try harder.
Bootloader should work just fine.
So again, turn of your phone. while the phone is turned off, keep the vol down, and press the power button.Release the power button, but keep the vol down pressed.
You can try the other way: hold the vol down pressed and reset the phone(red button on the back).
If you want to use the SD card method to flash something you still have to enter the bootloader, so you must keep trying.
Forgot to ask: did you manage to enter the bootloader or not, cause you only said it did not make any difference????.What does that mean?
I already trying to enter bootloader for the five hours, so I guess it's impossible, also tried that thing with red button it didnt load up that bootloader screen. The thing is that holding volume key down didn't work for me before to get into bootloader even when the phone was ok but it did install all roms which I tried so I didnt think that this would be problem either apparantely it is... Maybe youu have some other suggestions how to fix it ?
If you can make the pc recognize the HD2 then you can flash anything.
But i think that this is only possible in bootloader or windows or android.
So this is a problem.
No ideea for now.
Anyone help???
But you *do* push both vol. down and power buttons and keep them pushed until the screen turns on, don´t you?
I didn´t get into the bootloader as long as I didn´t kept both buttons pushed long enough... had to learn the "timing" kind of...
Hi guys,
My Mrs. Orange SanFran has all of a sudden decided it doesnt want it's screen touched anymore. All the hard buttons are working and can not see any other issues. Seems there are several people who have experienced it but it seems to resolved itselfon a restart but her's isn't, no matter how long I take the battery out or pressing the reset under the battery cover I can't use the screen making it useless.
Any ideas? I stuck a custom Rom of 2.2 on it when first got it but can't remeber which one, maybe modaco Kitchen R12 Rom.
Cheers
Reboot to recovery, Wipe both Dalvik and normal cache, and restart. If that doesn't help, do a factory reset / wipe data, and restart. If that doesn't help re-install the rom.
Thanks for the tip, but I tried to enter recovery by holding down volume key when powering up but a screen breifly loaded that had the small text "android" written upsidedown but then just goes on loop of the screen and the standard screen, can't do anything.
Holding up volume whilst powering on doesn;t do anything and because I can't use the touch screen I can't access any recovery apps through the phone OS.
It's weird cause I've used to recovery mode on phone boot before as first ROM didn't work, so I know the recovery module worked before, no idea why not now. :-s
Could be either bad flash/root or faulty hw. Google "de-bricking a ZTE Blade".
Thanks again. Came across a very thorough article on modaco but unfortunately the phone won't do anything than a normal startup when holding the up volume or up and menu, so can't try any of the suggestions.
The volume buttons do work though as moved the volume in the OS
Just to be sure: you did first press & hold the volume down button, and then press & hold the power button? You have to hold them both down until the recovery menu pops up. I can take even 10 seconds or more.
If everything fails, try TPT flash. It should solve if there is no hardware issue.