Hi guys,
My Mrs. Orange SanFran has all of a sudden decided it doesnt want it's screen touched anymore. All the hard buttons are working and can not see any other issues. Seems there are several people who have experienced it but it seems to resolved itselfon a restart but her's isn't, no matter how long I take the battery out or pressing the reset under the battery cover I can't use the screen making it useless.
Any ideas? I stuck a custom Rom of 2.2 on it when first got it but can't remeber which one, maybe modaco Kitchen R12 Rom.
Cheers
Reboot to recovery, Wipe both Dalvik and normal cache, and restart. If that doesn't help, do a factory reset / wipe data, and restart. If that doesn't help re-install the rom.
Thanks for the tip, but I tried to enter recovery by holding down volume key when powering up but a screen breifly loaded that had the small text "android" written upsidedown but then just goes on loop of the screen and the standard screen, can't do anything.
Holding up volume whilst powering on doesn;t do anything and because I can't use the touch screen I can't access any recovery apps through the phone OS.
It's weird cause I've used to recovery mode on phone boot before as first ROM didn't work, so I know the recovery module worked before, no idea why not now. :-s
Could be either bad flash/root or faulty hw. Google "de-bricking a ZTE Blade".
Thanks again. Came across a very thorough article on modaco but unfortunately the phone won't do anything than a normal startup when holding the up volume or up and menu, so can't try any of the suggestions.
The volume buttons do work though as moved the volume in the OS
Just to be sure: you did first press & hold the volume down button, and then press & hold the power button? You have to hold them both down until the recovery menu pops up. I can take even 10 seconds or more.
If everything fails, try TPT flash. It should solve if there is no hardware issue.
Related
I tried flashing the recovery and it works but when I try to boot into it, there is this android lying down with the front panel open with a red warning label. I can't do anything but to remove battery. Is this normal? Sorry if its a stupid question.
You're Sure that you flashed the right one, and youre using the right button Combo?
you can enter the Recovery by holding: Vol up, vol down and home then hold power and wait for phone to vibrate, if it vibrates then release Power and wait
if youre sure that both are right, try flashing the recovery a second time it seems to be a common problem, let me know if it works
best regards
I tried flashing the recovery again but all it does is do a factory reset on my phone. Also, the droid pops up again and I can't do anything except battery pull.
RESOLVED Did it the hard way
Dear experts,
Phone model: Karbonn A9+
Rom: Custom Rom Hyperion Skyfall
When I hold the power button, the phone turns on and off, No problems with that.
However, when I press volume Up+Power, I get a green screen saying FASTBOOT at the top left corner and that’s it. Nothing happens from that point.
when I press volume Up+Power, I get a green screen and holding the buttons past that I get a red screen saying RECOVERY at the top left corner and that’s it. Nothing happens from that point.
However, when I press volume down+Power, I get a black screen saying ENTRY QPST DOWNLOAD at the top and that’s it. Nothing happens from that point.
I have to remove the battery to turn my phone off.
Moreover, I tried a factory reset erasing internal and external storage, after erasing when the phone is rebooted and gets stuck in the start-up screen. I removed the battery and powered on the mobile ,no problem at all the phone turns on but not resettted.
What I did?
Tried to install latest CWM through recovery, updated it but I pressed something instead of restart your device.
What should I do to make everything work again? I am a noob in Android, please be extra patient and illustrative
Many thanks in advance
same issue
Paalagan said:
Dear experts,
Phone model: Karbonn A9+
Rom: Custom Rom Hyperion Skyfall
When I hold the power button, the phone turns on and off, No problems with that.
However, when I press volume Up+Power, I get a green screen saying FASTBOOT at the top left corner and that’s it. Nothing happens from that point.
when I press volume Up+Power, I get a green screen and holding the buttons past that I get a red screen saying RECOVERY at the top left corner and that’s it. Nothing happens from that point.
However, when I press volume down+Power, I get a black screen saying ENTRY QPST DOWNLOAD at the top and that’s it. Nothing happens from that point.
I have to remove the battery to turn my phone off.
Moreover, I tried a factory reset erasing internal and external storage, after erasing when the phone is rebooted and gets stuck in the start-up screen. I removed the battery and powered on the mobile ,no problem at all the phone turns on but not resettted.
What I did?
Tried to install latest CWM through recovery, updated it but I pressed something instead of restart your device.
What should I do to make everything work again? I am a noob in Android, please be extra patient and illustrative
Many thanks in advance
Click to expand...
Click to collapse
I am facing the same issue...today i flashed "ClockWorkMod_Recovery_V6_-_Karbonn_A15.zip" . It was flashed successfully. But after that whenever I try to enter recovery mode using Power+ Volume up keys, it shows red screen... thats it....i do not see typical recovery screen menu. However the screen turns full white. Only option is to take out the battery and restart the phone.
PLEASE PLEASE PLEASE HELP
Hi all,
Got this phone last week. It's been really laggy and basically unusable, it even lags when receiving calls and I miss half of them from being unable to answer. I was advised to wipe the cache partition, but the recovery menu is in Chinese. I got in touch with Motorola support who first tried to get me to delete all my data in the Chinese recovery menu, then gave me instructions to wipe the partition in English which I can't follow because the menu is in Chinese, and then said they couldn't help further. I can't find any other examples of Motorola phones with a Chinese recovery menu online.
Really not sure what to do!
Thanks for reading.
When I pressed power+volume down, phone booted into some Chinese screen, but it was not recovery, it was I think a testing menu. You might have pressed the same buttons. To boot to recovery, press power+volume up, this will launch a menu, keep pressing volume up to select recovery, then press volume down to launch recovery, after launching recovery you'll see no command screen, there you should hold power button and press volume up, this will launch recovery. Hope it helps.
That worked, thank you! Motorola were less than useless. Much appreciated.
In case it helps anyone, I fixed the lagging today by installing a new version of google play services, which I found by googling. Made everything better.
Please confirm which version of Google Play services you installed as I have the same problem.
Aman301582 said:
When I pressed power+volume down, phone booted into some Chinese screen, but it was not recovery, it was I think a testing menu. You might have pressed the same buttons. To boot to recovery, press power+volume up, this will launch a menu, keep pressing volume up to select recovery, then press volume down to launch recovery, after launching recovery you'll see no command screen, there you should hold power button and press volume up, this will launch recovery. Hope it helps.
Click to expand...
Click to collapse
This wont work for me it will just restart the phone back to where you can choice fastboot, recovery and normal.. ****ing annoying.... Got the bot with no command text under and press power button and volum up frustrating. Even worse when someone els got it to work so it should be working.
wackyleaks said:
This wont work for me it will just restart the phone back to where you can choice fastboot, recovery and normal.. ****ing annoying.... Got the bot with no command text under and press power button and volum up frustrating. Even worse when someone els got it to work so it should be working.
Click to expand...
Click to collapse
You have to hold Power button and tap volume up. Don't press both buttons simultaneously, hold Power, while holding Power tap volume up. If it does not work, then a system update might have changed the process (though highly unlikely I think).
Aman301582 said:
You have to hold Power button and tap volume up. Don't press both buttons simultaneously, hold Power, while holding Power tap volume up. If it does not work, then a system update might have changed the process (though highly unlikely I think).
Click to expand...
Click to collapse
Iv managed to installl twrp but in the processes I dont know how only used fastboot format userdata and installed recovery. Rebooted the phone and it stuck it got no internal memory... So its totally wiped now its a xt1706 belive thats the E3 Power cant find any roms for it.
wackyleaks said:
Iv managed to installl twrp but in the processes I dont know how only used fastboot format userdata and installed recovery. Rebooted the phone and it stuck it got no internal memory... So its totally wiped now its a xt1706 belive thats the E3 Power cant find any roms for it.
Click to expand...
Click to collapse
Stock images for e3 Power are available somewhere in the forum. Try flashing stock images. By the way there is no need to format userdata while flashing recovery.
Okay i managed to figure it out spent 5 houres or so had to use SP_Flash_TooL and some USB VCOM drivers for phone this can only be used on MTK chips.
trust me i just saw this post every google search is saying stuff about pressing volume down like it works XDA developers are life and life savers been using this since like 8 years ago and it still going strong had to leave my first comment
My huawei y511-u30 mobile is showing chineese in recovery mode and its not working also. As i want to flash my rom unable to get device detected by pc also
Good evening everyone, i'm having a serious issue with my samsung A5. It was rooted, with custom recovery and custorm rom (Android 6.1 i think).
2 Days ago, a chewingum got stuck on my screen. I tried to remove it with nail paint remover, it did the trick but then my home button stopped working: the button itself can be pressed normally, but it won't work. I also experienced randomly long home button press actions, so i decided to turn them off. I thought that few drops of liquid may actually have gone beneath the home button. Few hours later, i experienced more issues: volume going up without anyone pressing the button (and the buttons are not stuck at all, and that side never got close to liquids), power button not doing his job etc. I tried to do a soft reset by recovery (cleaning cache and dalvik) but i ended up aslo factory resetting it for a distraction. Reconfigured the device, everything was back to normal (except the home button) but then i also experienced a couple of random volume up and crashes upon making phonecalls. SO i decided to reflash the entire rom, downloaded it + gapps, put into the decide, rebooted in recovery. Wipe cache, dalvik and also system i think, then i tried to intall the zip files but they were not there (probably i should have avoided wiping system, i get confused sometimes). I turned the device off and on, and now i'm stuck on bootloop (regular mode), can reboot it but it seems i can't go in either recovery or donwload mode (so no odin flash). Device is not recognized by the Pc. I keep rebooting it with power + home + volume down and as soon as i see the screen turn black, i try to press again volume up + home to enter recovery, but it goes straight to bootloop.
Any idea on how getting out of this situation? Thank you in advance
Dharmost said:
Good evening everyone, i'm having a serious issue with my samsung A5. It was rooted, with custom recovery and custorm rom (Android 6.1 i think).
2 Days ago, a chewingum got stuck on my screen. I tried to remove it with nail paint remover, it did the trick but then my home button stopped working: the button itself can be pressed normally, but it won't work. I also experienced randomly long home button press actions, so i decided to turn them off. I thought that few drops of liquid may actually have gone beneath the home button. Few hours later, i experienced more issues: volume going up without anyone pressing the button (and the buttons are not stuck at all, and that side never got close to liquids), power button not doing his job etc. I tried to do a soft reset by recovery (cleaning cache and dalvik) but i ended up aslo factory resetting it for a distraction. Reconfigured the device, everything was back to normal (except the home button) but then i also experienced a couple of random volume up and crashes upon making phonecalls. SO i decided to reflash the entire rom, downloaded it + gapps, put into the decide, rebooted in recovery. Wipe cache, dalvik and also system i think, then i tried to intall the zip files but they were not there (probably i should have avoided wiping system, i get confused sometimes). I turned the device off and on, and now i'm stuck on bootloop (regular mode), can reboot it but it seems i can't go in either recovery or donwload mode (so no odin flash). Device is not recognized by the Pc. I keep rebooting it with power + home + volume down and as soon as i see the screen turn black, i try to press again volume up + home to enter recovery, but it goes straight to bootloop.
Any idea on how getting out of this situation? Thank you in advance
Click to expand...
Click to collapse
Sadly, no software can fix broken hardware, it's probably best, as you'll now know, not to pour chemical liquids onto electrical devices, and just what kind of chewing gum exists that requires such extreme cleaning measures from a flat, non-porous surface I'll never know.
That said, as for rebooting, a force-restart on your device *doesn't* require you to hold Home+Volume down+Power, that should only reboot you to bootloader/download mode.
Try again only holding Power+Volume Down. THEN, when your screen goes fully black, immediately switch to Power+Volume up+Home.
You should then boot into recovery mode without any loop.
Good luck!
D4ND310 said:
Sadly, no software can fix broken hardware, it's probably best, as you'll now know, not to pour chemical liquids onto electrical devices, and just what kind of chewing gum exists that requires such extreme cleaning measures from a flat, non-porous surface I'll never know.
That said, as for rebooting, a force-restart on your device *doesn't* require you to hold Home+Volume down+Power, that should only reboot you to bootloader/download mode.
Try again only holding Power+Volume Down. THEN, when your screen goes fully black, immediately switch to Power+Volume up+Home.
You should then boot into recovery mode without any loop.
Good luck!
Click to expand...
Click to collapse
I didn't dip the smartphone into a cup of liquid, i just took a piece of cotton, poured a bit of nail pain remover (don't know the exact name in english, sorry) on it and then scratched the part where the chewing gum was on (on the soft touch back key, which works 100% fine).
I am trying using the method you described, but it seems i can't go into recovery. Maybe i'm not quick enough! will keep trying. If you have any other suggestions i will be glad to hear that!
You could try to make a USB jig, or buy one off of eBay. They're really cheap. Its basicly just a resistens that force the phone to download mode. It have worked fine for all my Sammy's including A310 so it probably works for A (15) series as well.
Just put it in USB connector and press power for a few secs and you should be in download mode.
Just an idea if everything else fails
Sent from my Honor 5X using Tapatalk
go to samsung
A hardware problem could NEVER be fixed by software ways... Unfortunatelly...
It seems that liquid made some changes on your PCB (maybe dissolved some isolators inside??)...
Anyway, go to service or replace it!
Hello everyone, i've updates about my problem and i would be glad if you could kindly point me in the right direction.
I purchased an USB Jig as suggested by one of you guys, i forced the device into dowload mode and installed a fresh stock firmware + custom recovery. When i try to boot i get a bootloop on samsung logo, and can't go into recovery probably because of the broken home button. I would like to enter recovery by using ADB command, i used to do it in the early days of Android but i'm a bit rusty and all the guides tell the procedure from an already functioning device. Since i can start it properly, is there a way to reboot it in recovery via ADB?
Thank you in advance
Dharmost said:
Hello everyone, i've updates about my problem and i would be glad if you could kindly point me in the right direction.
I purchased an USB Jig as suggested by one of you guys, i forced the device into dowload mode and installed a fresh stock firmware + custom recovery. When i try to boot i get a bootloop on samsung logo, and can't go into recovery probably because of the broken home button. I would like to enter recovery by using ADB command, i used to do it in the early days of Android but i'm a bit rusty and all the guides tell the procedure from an already functioning device. Since i can start it properly, is there a way to reboot it in recovery via ADB?
Thank you in advance
Click to expand...
Click to collapse
if you can access Download mode try this. hold volume down+home+power button. once the screen is black simply turn your finger to volume up while still holding the power and home button then release when SAMSUNG appears.
Sent from my SM-A500F using xda premium
babyyeobo14 said:
if you can access Download mode try this. hold volume down+home+power button. once the screen is black simply turn your finger to volume up while still holding the power and home button then release when SAMSUNG appears.
Sent from my SM-A500F using xda premium
Click to expand...
Click to collapse
Thanks for the suggestion, but still couldn't get into recovery. I think the home button is really broken, therefore i need to access recovery in another way.
Cause i flashed the stock samsung firmware twice with odin and i can't still start the phone properly, every guide says that a wipe of cache and dalvik solves the situation. But i need to get into recovery for that.
I can't go into recovery with normal procedure probably because the home button is not working, and all the guides about adb commands say that you need to plug in your phone when it has fully started. So i either need a way to force the device into recovery with my computer, or a firmware that once flashed doesn't give me bootloop
Recently I have updated the firmware to 8.1. by using Odin successfully. However, the Internal Storage was reduced to the half only. In trying to fix this, I reflashed it with 'Nand-Erase' option checked (stupidly!). Then everything gone wrong.
- Bootloop (Struck on SAMSUNG logo)
- No recovery
I reflashed without checking 'Nand-Erase' but still not working, bootloop.
Then I installed/flashed TWRP from Odin again. It was successful, but very sadly I can't do anything:
- Unable to restore backup
- No Factory Reset/Wiping Date, Cache etc.
- No Power off
- Unable to Mount
- Internal Storage show 0MB.
Have you ever faced this problem? Can any one help me please. I am really in need of your suggestion and advice.
SOLVED!
After browsing through lots of pages, I found a solution which works for me. Even though my problem has been solved, I will just put the solution here, in case anyone may face the same problem with me. Follow the Steps below...
Reboot into Recovery (Press volume up, home and power button at same time)
Phone will reboot, leave power button but keep holding other 2 buttons.
After you see android/system update installing screen, leave these 2 buttons
Wait for few seconds and phone will show 'no command' then press volume button 3/4times and system recovery will open
with volume keys go to "wipe cache" and press power key.
after that select "wipe data/reset" and press power key.
after that select reboot phone and press power key
now phone will go to Samsung logo screen and you may think that it is again stuck in bootloop
But no, wait for some time->for me it was less than 4-5 min
and you will see the installing apps and other messages on screen
DONE!
Be Happy
Very considerate for you to post that info up for others. Thank you.