Database Users

do you use a screenprotector?

Do you use a screenprotector on your trinity? I do, one from Brando, but I don't like it and am thinking about removing it...
Is anyones screen already damaged?

Is it possible to put it perfectly at all ?! I mean I must be in a totaly sterile envoirement with gloves and special suit and God knows how and what skill I must have to put it right
My Trinity is one day old but I will surely remove it in a couple of days, can't look at it with this ugly bubbles beneath

The first thing I do when I get any new device is get a screen protector for it, and it goes on before I ever start using the device. I've gone through a lot of PDA's over time and one thing I can say is that you get better at putting on the protectors and you get used to the odd bubble or piece of dust underneath. It's far better than what happens to your screen without a screen protector over time.
The best way to put the protector on is to carefully peel just a bit of one edge and line it up at the top of the screen. Then use the included card to slide the rest down the screen, the paper backing will peel off as you do this and it helps to prevent bubbles and dust getting on the stick side of the film.

If you don't like bubbles, try a brand that is not adhesive. Most people don't like the type that slips under the case but I do. I've been using NuShield protectors for a couple of years on 4 different PDAs and they are great IMO. I don't use a case (store in pocket) and NuShields are very durable - easily lasting 6 mo.

I'm using a brando ultraclear for K-Jam in my p3600... it works perfect... I haven't any sort of bubbles because i put it the first day i got my new device.. so device under it was very clean and the result is PERFECT

shoey5 said:
...you get used to the odd bubble or piece of dust underneath. It's far better than what happens to your screen without a screen protector over time.
Click to expand...
Click to collapse
Completely agree!

I'm using Covertec Screenprotector(for S100), and it works like hell!
The screenprotector is about 1-1,5 mm thick, so it's pretty thick compared to many other brands, but the advantage is that it's almost impossible to get airbubbles, and the screenprotector is 110% clear! So you won't even see it's there!
Comes in a pack with two protectors, one with UV-filter, and one which is ultra-clear...
Can highly recomend them... No need for a "anti-bubble-wiper-thingy"

1.5mm thick?!?!?! That's thicker than a "anti-bubble-wiper-thingy". I have wetsuites that thick. You talking about a case or a screen protector?
LOL
No offense - just having fun. Some are actually quite thick in comparison.

Hehe! Well, ok; maybe it's a bit thinner... But it's about the thickness of a playing card, and just as stiff as one too...
And no, it's not a casing, or a wetsuit... Maybe a drysuit haha!

I use protector, but got 2 bubbles which I want to try to remove.
Can anyone tell me how to remove the protector without using anything thin and sharp?
Asbjørn

Tape. Take a 1-2 inch long piece of tape and press one end on a corner of the protector. Then pull

I can't get my screenprotector removed...not even with tape

Hate screen protectors. Don't use them. My nephew has a Jam which is years old and hasn't had a protector. NO screen scratches -- only a little dullness where the SIP keyboard is but that buffs out in seconds once a year using Displex. No scratches from keys even though it's subject to some abuse and the casing is scratched and dented. Thus I myself have no crap on my P3600's screen.

Im not a fan of cases or screen protectors, but I got 1 for my p3600. Its pretty good, I just wish it was about 2mm wider, since the left edge doesnt quite go till the very end of the screen which is annoying.

I got my screen protector from 'Javoedge.com' , it cost me about £8.50 but it is worth every penny.
It is cut to the exact size of the Trinity screen and fits really well. It is so thin that it slides beneath the White plastic case of my Trinity and the screen itself, so there are no edges of the screen protector to be seen.
I agree that you must take your time when installing it to try and get the edges straight, but when it's on it fits and looks great.
I opted for the super clear version and not the anti-glare version.
Great product!

Invisible shield from ShieldZone.com
I'm using an "Invisible Shield" from ShieldZone.com for my P3600. At the time I got mine, it didn't exist any pre-cut version for the P3600, so I ended up with a pre-cut TyTN shield, since they have the same screen size.
The first 2-3 days the result wasn't that good as I had some bubbles under the shield, but they disappeared after some days.
Watch the demo videos on ShieldZone.com, and I guess you will be as impressed as I'm with this shield.
-Bjørn

Hi people.
I am soon gonna be a happy owner of a Trinity and i will definately buy a screen protector for my device. Can you please give me your opinion on different brands you have tried?What brand would you recommend buying?
Thanks

I have a Brando one that they now market as a P3600 version.
It sticks to the screen with static so no glue or residue if you remove it. Also this means it is washable too. The static provides more than enough force to keep it on the screen. In fact it is stuck fast. Only by pulling a piece of tape stuck to it by both ends will remove it.
My only problem is more with screenprotectors in general. Since they add extra thickness to the screen they do affect the sensitivity of the touchscreen. So for a while you will write with the stylus and you wont be using enough force. You get used to it, but it would still be nicer to find a thinner membrane.

Mine is a Clear Touch Crystal from Boxwave. I've used Boxwave's products for years and found them to have very high durability and quality. The screen looks like it has nothing on it at all when the device is on. I find that it actually seems to improve touchscreen accuracy and feel.
The only problem I have had with screen protectors in general is that if they are cut too close to the borders of the screen, that is, if they fit too well, they seem to interfere with the screen's ability to detect taps. I think it is interfering with the digitizer. Every time I have installed a protector PERFECTLY leaving no gaps on any side, the screen stops responding until I remove the protector and reinstall it with the edges trimmed in about 1 mm on all sides. I don't think that you need to have all edges trimmed, but I do it for uniformity's sake.
Hope this helps someone who gets a protector and then thinks they broke their device by installing it like I did my first time.......ahhh to be young again.....

@olsenbjo
Does the Invisible Sheild cover the entire device, or just the screen?
Thanks!

screen protector yes or no

any one with recommendation on screen protector

I'm currently using a Zagg max coverage protector that I had installed at Best Buy, and have no complaints so far. The only thing I've noticed with it is that my finger tends to get stuck when using Swype, but not often enough for it to bother me.

I don't have this phone but I don't think you need a screen protector. I haven't seen any videos on the screen durability test like they do for the iphone scratch test. But I think the screen should be sturdy enough. The screen won't be as smooth to scroll with a plastic layer. And if you accidentally get even a drop of water in the corners of the phone with the squeegee, you are screwed. Good luck.

Using an Invisible Shield on mine. This is the only phone I've ever used one on. I figured with a screen this huge I want to keep it looking nice.

You don't need you it is glass like the Iphone and hero. I have seen test's on both using key to try and scratch nothing happened. Anything that would damage the screen (scratch it) would go right through the screen protector and still damage it. As it would take a lot of force to scratch. Just a wast of money not to mention it hampers the touch screens ability to pick up your finger.

someone apparently water damaged their evo with putting on a protector. Careful. I would cover up the indicator on mine once I get it.

i have a zagg on mine and hate it. its sticky and has a "orange peel" like appearence. i ordered a hard plastic one on amazon and am waiting for it to come in the mail.

I also feel that a screen protector is unecessary...glass is very hard to scratch, and can only be scratched by something harder than it is.

Zaag one here and I think it's too sticky. It messes with my swiping. Catches my finger too much.

chazglenn3 said:
I also feel that a screen protector is unecessary...glass is very hard to scratch, and can only be scratched by something harder than it is.
Click to expand...
Click to collapse
I used the same logic with my hero and ended up getting a few scratches just from unforseen sh!t happening. this screen is too beautiful for me to risk.
also whoever water damaged their phone while putting on a screen protector is an idiot.

I put one on for peace of mind and it works just as it did without the protector.
However, if it's like the iPhone screen, then you shouldn't need one at all. I had the same iPhone since the release date and had zero scratches as of Friday... it's last day in service!

We pre-ordered out Evo's at RS so we used out accessory credits for Zaggs and car chargers and I put them on. They do have an orange peel like look when looking at them at a angle with the screen off and reflecting off some light. But with the screen on and looking at them there is no issue with the display. They were not hard to put on either.

I'm using the "anti-glare" protector that comes in the 3-pack you get at the Sprint store for $12 (the other two are "clear"). I love it - it doesn't interfere with my user experience at all. Why on earth would you risk scratching your screen? To save $4 and 5 mins time?

Boxwave Crystal Clear screen protectors. I have a 3-pack on order (I have 2 Evo's between me and my girlfriend). We're using them "naked" so far until they arrive.
I highly recomend the Boxwave protector though, I have used them for about 6+ years on various PDA/Smartphones. I even have one for my P&S Camera.

Here is my experience:
Zagg:
Good -
Works well as protection
Hides fringer prints decently
Bad -
Blurs your screen a very small amount
Makes the surface feel like rubber
Hard to put on without getting a little dust under it
Generic hard plastic sheet:
Good -
Works well as protection
Feels very smooth, smoother than glass
Easy to put on, and normally you get 2 or 3 in case you make a mistake
Perfectly clear
Bad -
Finger print magnet, oil really builds up
You can see where the protector ends around the edges
Added glare in sunlight(small amount)
Unprotected Glass:
Good -
Feels very smooth
Easy to clean off, just rub it off on your shirt
Perfectly clear
Bad -
Medium finger print problem, but easy to clean
I feel scared to place it face down, once I get a case that recesses the face I will feel better.
Over all I decided to go with unprotected. Its the middle of the road and I feel the best over all experience.

Zagg Invisible Shield is NO GOOD.. Its almost sticky. Don't get it! I warned ya.

zone23 said:
Zagg Invisible Shield is NO GOOD.. Its almost sticky. Don't get it! I warned ya.
Click to expand...
Click to collapse
Agreed, the Zagg is sticky. But I deal with it so that I can protect it. I don't have a huge issue with viewing it or the orange peel look when it's off because you don't notice it when it's on. The fit is nice. On my hero, I had a really clear smooth one from ebay which was great, but was all scratched up. The zagg shouldn't even mark up which is why i'm dealing with it. Sticky, but not to the point that it pisses me off. I put it on myself relatively easily, just spray lots of that solution on it, no bubbles, no dust, 2 minute application.

Maybe the Zagg is sticky if you put it on backwards but I have ZERO complaints about mine.

I ordered a 3 pack of anti-glare/anti-fingerprint screen covers from handhelditems for 7.99 (for the 3pack). They have crazy deals on evo 4g accessories right now. I also got a car charger for like 3.99.
I bought it more for the anti-glare/anti-fingerprints than the actual screen protection.

Warning!
There is a whole thread started on water damage and most of this comes from any screen protector that requires you to spray on water... ei Zaggs
When you squeegiie the water off the screen it leaks in to the back of the phone and Sprint has been sneaky about placing water damage indicator right on the tip of the phone.. below battery.
Either cover the indicator with protector or stick to the regular screen covers..

ZAGG's invisibleSHIELD + X10 + review

Hi!
I got my hands on ZAGG's invisibleSHIELD for X10, it's on the way thru delivery.
I saw their videos, and it's seem hype.
Anyone have personal experience with this product?
Also, right now, I have a rubber-not-so-tight-fit casing for the X10, but I want to get one that has tight-fit, real tight fit rubber casing to put on after the invisible shield? Recommendations?
Something in the lines that matches with iSkin, that the have for the "not so hype" iPhone...

If you go up a level to the Sony Xperia X10 menu page and have a look in the accessories subsection there is a lot of info on cases and screen protectors etc which might be helpful to you.

I bought Zagg's full body invisible shield before for my SE Satio. They were difficult to apply. Also, the screen responsivenss was better on the stock screen protector. You dont really need to replace it if yours came with one. The Zagg screen protector feels sticky to the touch. Not so good on a capacitive screen

Zagg's invisibleshield is horrible. My buddy got one for his x10, and I applied it. Every piece was not cut precise except the back cover. The front screen protector wasn't even cut straight. The left and right borders were tapered in the middle leaving about 2mm of space, on each side, between the border and the screen protector.
From my own experience with the product on my x1, the full body shield turns yellow and traps tons of dirt at the edges. It just looks cheap over time.

Backcover? People actually _like_ having slippery backs? Imo the stock coating is optimal since it's very grippable, it's rugged and it doesn't gather any fingerprints.

ddewbofh said:
Backcover? People actually _like_ having slippery backs? Imo the stock coating is optimal since it's very grippable, it's rugged and it doesn't gather any fingerprints.
Click to expand...
Click to collapse
Well, I was just stating a fact that it does come with a back shield, and it's the best cut piece of the set. While I do like the bare back feel of the x10, the option is there for people to use it or not use it.

I got myself a Martin Fields screen protector. Applied it today. So far really loving it. Will review it soon.
InvisibleSHIELD is also supposed to be real good, but a pain to apply correctly.

needmoregigs said:
Zagg's invisibleshield is horrible. My buddy got one for his x10, and I applied it. Every piece was not cut precise except the back cover. The front screen protector wasn't even cut straight. The left and right borders were tapered in the middle leaving about 2mm of space, on each side, between the border and the screen protector.
From my own experience with the product on my x1, the full body shield turns yellow and traps tons of dirt at the edges. It just looks cheap over time.
Click to expand...
Click to collapse
I had the same experience with my Zagg sheild. Tappered sides and what not. Anyway I am not a fan. What I would like to know is if there is similiar screen shields to the ones for the iphone?? They have almost the texture of a sheet of paper, never streak and seem to provide excellent responsiveness. Im not sure of the different types of protectors but if someone knows of one like this let me know!
Also the Zagg shield on the back of the X10 is actually pretty sweet......its not slippery. In fact its the exact opposite. You can set the thing down on the dash of the car while charging and it will not slide around at all. But hey, if thats worth $20 then have at it.

Not bad...
I have the invisibleSHIELD for my X10 and it's not to shab... but not too good...
As with one of the posts above, the front screen protector was not cut to fit properly; there is a gap on my screen about 1/4" on the right side, however the left side is flush. I emailed Zagg about it and they have sent me a new one and apologized that the case was damaged during shipping (although it was very clearly NOT damaged during shipping, it was just cut that way).
The rest of the case fits snug, but it does get dirty/sticky on the edges. I will be getting another case to put over it; likely the FlexiShield.
I personally like the feel of the screen protector more than the stock protector. I have both of them on right now and have no issues with the touchscreen whatsoever. The Zagg shield never fingerprints, but it would with the stock protector.
Overall, I would give the invisibleSHIELD a 7 out of 10. If I was rating the screen protector alone I would give it 8 out of 10 (points dinged for the improper fit, hopefully the replacement sits flush).
If you are like me and want a mint looking phone you might get a little frustrated by the scummy edges, however the material is strong and you will definitely not scratch anything. I recommend doing away with the full body case and just getting the screen cover in combination with another case!
Cheers!
Update: Received the replacement but the screen protector is even more tapered on the edges than my original. I've scrapped the shield and went with a plastic fitted case. Too bad, I really like the quality of the material. I'm going to try and get a refund.

Wow! Judging by the reviews, I am not glad that I went for MF instead of ZAGG.

I got protech which is essentially the same thing and I have to say its pretty good. I've used invisible sheiks in the past on a g1 and found it was easier to apply to the x10. You have to be really patient though if you leave the smallest air bubble on the edge as previously mentioned dirt and dust gets trapped underneath and starts to peel.
Sent from my X10a using XDA App

I have full body Zagg ... it sux.
The size of the front part is not right so i have about 2mm on edges which are not covered.
The top, bottom and side parts are already gone.
The back part is still there ... for now.
I have a gadget shieldz full body.
I'll try it in about 2 weeks when the zagg will be gone.
Zagg lasted about 3 months.

I have the Martin Fields one bought from Mobile Fun. It is the biggest fingerprint magnet in the history of phones. I bought the double pack thinking I'd have a spare as back up. The actual screen applies beautifully but it has lifted in the top right hand corner near the proximity sensor. I managed to reapply it without taking it off totally but its still not perfect.
I want the same shield we bought for hubby's Iphone. Its a matt anti reflective one and shows no finger marks. I spend my life cleaning smudgy prints off mine.

To clear out what others said and my experience with zagg shield,
It all comes to how accurate are you when attaching it.
But if you want some advice, just put the back part only. The stock screen protector is much better, the side parts are too hard to put on.
and take care They are very stretchable. ..
Sent from my X10i using XDA App

I agree, the Zagg screen protector makes the screen slightly sticky or something. Makes it hard to drag things across the screen like when moving cards in Solitaire etc. I'm on the lookout for a good screen protector now, wish i never removed the stock one!
I actually like the feel and look of the back protector and yes, the side and bottom protectors are a bit too finicky and strechy for clumsy people like me to put on properly!

Painfull Installation - Happy Though!
Hey!
So, I finally had time over the weekend to apply the invisibleShield to my X10, the full-body, "maximum protection" version.
Just let me tell you:
(1) Painfull process - took nearly 2 hours from start to finish, minus break / re-doing time because i wasn't completely satisfied.
(2) Not enough solution - the spray bottle they gave is enough for 1 time installation only! No room for mistakes. Found out the solution was Johnson's brand baby shampoo & distilled water (I didn't have any distilled water, instead, used a new bottle water from Nestle brand) ... worked like a charm
(3) sizing - oh man! the sizing of the invisible shield is not perfect, except for the back piece ... front has gaps, 1/2mm or less on either side.
(4) Applying ... it took me about 3 times to get it right, fitted accordingly. That's how I ran out of the solutions.
(5) Squeeze is not good on small pieces, better to use a q-tip to slide thru the solutions off.
Overrall, it's a different feeling. Getting used to it.
Only thing I would ask ZAGG to do is: PROVIDE A BOTTLE WATER size of solution!!!! & correct sizing of the pieces.
- Just 1 or 2 mini bubbles seen just by me, otherwise, it's a charm!
Still, I got my hands on a iPhone 4 32GB as well, kit for that is coming soon. Should be easier ...
I wish they had Otter Box style casing for X10.

tell us about fingerprint and screen clarity ...

naveen_reloaded said:
tell us about fingerprint and screen clarity ...
Click to expand...
Click to collapse
Clarity is ok.
Fingerprints ... way better than the original but still not good enough ...
Just don't drop sun protection lotion on your phone
You will need another invisible shield ...

Fingerprint is not there, or atleast, very much of it is reduced. I am a clean freak, so, I clean it everyday before putting it to charge for the night.
Senstivity was something to get used to, little bit off in the beginning, but after the curing process of the invisibleshield, it works like a charm.
Anyways, I contacted ZAGG, they are sending me another full kit for the X10, since I complained about the sizing & not enough solutions ...
I have to wait for approx 1.5 weeks to receive, remove the old/existing one, and do it correct the 2nd time around.
Of course, i need to send back the one I have right now when I receive the other one...
I'll post a message on how my 2nd attempt went, (with extra bottle of solution, yeah! that's right! I demanded to the agent on the email for 2nd bottle of solution)...either way, baby shampoo & distilled water is good enough too.
Screen Clarity - 100% or 99.99% , unless you angle the phone differently in the light or reflection , you dont see it.

I had the full body but took it off.
I bought the white X10 in dubai, like everyone else said fitted poorly and bleeds the colours from your case, I had to take it off as everyone was saying how battered the phone looked after a month.
It is pretty bullet-proof though, sure it must look better on the black phone!

anyone using these without screen protectors?

so its been awhile, we have gorilla glass, i'm picking up my replacement epic today. should I go naked this time? just wondering I know I read a while back that a number of people were going naked. did the screens get scratched? I've dropped my phone once or twice, but it does have a case around it.
just figuring why waste the beauty of the screen behind a cheap protector if I don't need to. but hate to scratch the screen on the phone.

I haven't used a screen protector at all. Screen is still flawless, but I also baby my phone. The only mark anywhere is on the plastic on the side when I dropped it in my garage. Ended up face down but not a single mark on the screen.

i Just put one on because it helps avoid fingerprints but the screen is really strong even naked
GHOST ARMOR !FTW!

Well I've droped my phone and nothing happend to the screen
But the only thing that is "kind of" annoying but not a problem at all because it common sense it will have it is fingerprints that's all the screen protecter going to do
Sent from my SPH-D700 using XDA Premium App

Nekked.
Had a screen protector on mine but removed it after a couple months. Couldn't get over the better responsiveness! I put mine in my pocket and make sure it's the only thing in my pocket (no keys, coins, etc.).
Screen doesn't have a scratch on it.

I use Ghost Armor on my epic. Just feels nicer than those damn plastic sh*t you get from RadioShack and best buy

I have had mine gor only 4 months but I do have a really faint line in my screen near the top from droping on my floor screen down.
Sent from my SPH-D700 using XDA App

I go naked and have a plastic flash drive also in that pocket - which I try to keep on the back of the phone with the screen face down on my leg.
I have 2 identically shaped scratches about 2mm long, one deeper than the other. I can't see them unless the conditions are perfect...and can only feel one if I run over it with a fingernail. It shouldnt have scratched but something abrasive (like sand) must have gotten into my pocket or on my finger and I didn't know. It sucks, but I much prefer the feel of the real screen and will be upgrading in a year anyway.
So, FYI, it can get scratches regardless of how you baby it. Have to decide whether its worth the risk or not.

I use mine w/o any cover, but I do notice slight scratches on the screen. I can only see them with it off and held at the right angle, but I can see they are there.
IMO, it all depends onhow rough you are with your phone
Do you take it where it can get sand across the glass? Dropped into dirt? Rubbed around with a bunch of hard objects?

Tried an invisible shield but couldn't stand the tackiness. Took it off and just going naked - yeah fingerprints and oils from your face tend to make a mess of the screen, but that happens with most protectors too. Quick wipe on the jeans or shirt and it's all good

DCRocks said:
I use mine w/o any cover, but I do notice slight scratches on the screen. I can only see them with it off and held at the right angle, but I can see they are there.
IMO, it all depends onhow rough you are with your phone
Do you take it where it can get sand across the glass? Dropped into dirt? Rubbed around with a bunch of hard objects?
Click to expand...
Click to collapse
Even just a few grains of sand in your pocket can cause those minor scratches so I keep mine in a holster.

Go naked. It feels better.
Sent from my SPH-D700 using XDA App

I was using screen protectors when I bought it. Then one night I dropped my phone when I was in the bathroom after dropping it two or three times before and that night however the screen broke. I have insurance and therefore was able to replace the screen for free. Then I bought cheap protectors at Wal-Mart..Bad Idea. Response was horrible and you had to cut them,etc..Just a very bad idea. I finally decided that if I'm paying thee outrageous price for the phone and have only had to use insurance once..Then I might as well go naked because if I need to replace the screen I'll just do so. Why pay an additional cost ? If finger prints are an issue which they're only noticeable imo if you're watching films or the phone is off then just carry a cloth. Wipe as needed.

Xerloq said:
Go naked. It feels better.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Thats what he said!!
I use a invisible shield myself, I like it. Besides a few little bits of black fuzz under the screen protector.. Its a ***** to apply it though, and you NEED to leave it off for 24 hours like it says or you'll probably be trying to get a new phone... like me....
cant help but circulate my video. that was probably causes by the damn invisible shield solution...
http://www.youtube.com/watch?v=vvosH8UZrWw

I dropped mine and it scratched, bought the Realook screen protectors from Amazon and you can't even tell it's there.

I use www.stealthguards.com , They haven't let me down yet, and are much better than my Zagg on my Evo. Plus they are cheap as hell, well, free! You just pay shipping.

I had the screen protector (phantom Skinz) case and holster (seidio) and have since removed them. I've been naked and without protection (lol) for about 6 months now....not a scratch. My right pocket is reserved for it and nothing else. Phone still looks like its brand new out of the box.
If you need a screen shield I would definitely recommend Phantom skinz. Awsome product and unlike a lot of the others that claim to be "barely visible", this one actually is.

Nothing on mine.
I got those stealth somethingerother protectors kits when they were giving them away in pairs, but after putting one on the back cover to see how it felt, I decided against using it.
I've actually run a serrated knife across my screen (violently) and had no scratches at all, however on the other hand one tiny (.5mmx4mm) line appeared way up top by the indicator within a month or so of ownership. No idea how that happened.
Oh well.

I ran Zagg Invisibleshield for the first month, but had to ditch it because the orange peel was so bad and so was the tacky feeling. I've been bare ever since. Just got the wife an Evo Shift and since I was already ordering a set of Realook protectors for her I went ahead and got a set for myself. Ideally, I will sell this phone when I am ready for the next (dual core) toy, and why waste $100 on an insurance replacement if I don't have to?

i might have an extra protector at home, otherwise i'll just probably go naked, not gonna spend 17 bucks for another sprint one and figure at worst case, i'll only have the phone another year and a half. with the way sprint is going with wimax, probably only going to be another 6 months so I can live with it, plus I really don't like the feel of the protector.
Superbovine said:
Nothing on mine.
I got those stealth somethingerother protectors kits when they were giving them away in pairs, but after putting one on the back cover to see how it felt, I decided against using it.
I've actually run a serrated knife across my screen (violently) and had no scratches at all, however on the other hand one tiny (.5mmx4mm) line appeared way up top by the indicator within a month or so of ownership. No idea how that happened.
Oh well.
Click to expand...
Click to collapse

Ordered the S7 Edge, I'm scared I'll drop it and break it....

Currently I'm using an S5 without any cases or covers, and it's still drop-proof, dropped it multiple times on hard floor/concrete and there is no damage on the screen what so ever. And before that I had an HTC One X, which is probably more similar to the Edge in that the screen isn't protected if it drops face down, I did eventually crack it with that kind of a drop. However the edge is gonna be even more problematic because even the back is glass, and no plastic protruding edge to protect it.
Sure I could put it in a bulky case but then it kind of defeats the purpose of having one of the most premium feeling phones ever doesn't it? It'll also negate any ergonomic benefits of the curved back edge as well as the ease of edge swipe on the front edge. Might as well just get something like a.... I don't know, nobody makes high end plastic phones anymore now days, even cheap phones like One Plus is front+back curved glass. Also this thing is already a bigger phone than what I'm used to, adding a beefy case is just gonna make it that much bigger, which I do not like.
Well I guess plenty of people did survive the iPhone 4 glass sandwich era just fine, I'll just have to wish myself luck. I wonder how much would one of those adhesive skins help in a drop situation. Sure they are very thin but if think about the physics of it, gorilla glass is actually quite flexible so it doesn't break from the acceleration of the impact itself, so thinness doesn't really matter. What actually breaks these surface hardens glass is usually a microscopic failure on the surface developing into a big crack. And those microscopic failures can happen when they make contact with sharp hard stuff like individual sand particles, they effectively puncture the surface and develop a weakness. So if you have a skin on the glass, what'll hopefully happen instead is that the skin will be thick enough for the particle to not make direct contact with the glass, and prevent breaking. Even though such thin skins cannot significantly reduce the impact acceleration.

I understand your points, but please, don't ever try to use this phone naked. You NEED a case, the grip is so bad that dropping it is almost a guarantee and the back glass seems to be much more fragile than the front glass from what I have seen in videos. About the cases, you may want to look into the Samsung official plastic backs or (when available) the leather backs. The official plastic back cases from Samsung are the only ones (in my opinion) that really do not ruin the phone's design, the design remains almost intact. However, while the grip is much improved over the naked phone, it is nowhere near other bulky and rubberized cases. A rubberized plastic wrap would be a solution, but the big problem still remains - the metal sides of the phone which are very narrow.
PS: As I understand from the latest spy pics, the iPhone 7 will have a glass back again...probably needed for radio/charging/payment/other secret developments.

There are plenty of case available that won't make the phone look s**t. I'm using a Spigen Crystal Clear, a very good combination of protection and looks. It's impossible to completely keep the phone's look and feel, but it's probably as close as possible whilst being confident of being able to accidentally drop it from pocket height without damage.
Glass protectors on these curved screens are to be avoided, that's my personal opinion anyway. My brother bought numerous types of these for his S6 Edge (expensive and cheap) and not one went on properly without raising on the curves within twenty minutes, causing touch problems on the edges. Go for a good quality film type like a Zagg HD Dry.

I copied you entirely mate I'm not ashamed to say. Got my Spigen Crystal Clear yesterday and, your right, it does look good, but not as good as the nekkid phone itself. But I guess that's the price of good protection.
Just waiting for my Zagg HD Dry front and back covers to arrive today.

I'm personally using Otter Box Commuter for me and my wife's phone. I was able to try it on in store before purchasing. I was sort of desperate for a case on delivery day and it was the most protective case I found. I'm happy with it overall. It's sleep and slim and although the whole front in uncovered it does have raised top and bottom edges so if the phone falls flat the screen doesn't actually touch the floor.
Sent from my SM-G935F using Tapatalk

Use it naked.
Control your fingers.

nobnut said:
Use it naked.
Control your fingers.
Click to expand...
Click to collapse
Too risky lol
Sent from my Blackberry Bold

I would love to use the phone naked as it just looks so good, but I am scared to risk it. I have never dropped and cracked a phone, and I had an Iphone 4S without a case for 2 years which were well known for getting smashed, I have a clear case on the edge at the moment to offer it some protection.

Carrying and using smart phones without any case is just asking for trouble. I have the S7 Edge and when it arrived on March 2nd it stayed at home in the box until my Spigen Ultra Hybrid case arrived (which was a few days later). I was still using my S5 because I didn't want to take any chances.
After my case arrived I put it on but I still keep the original plastic film on the screen because I was waiting for my Skinomi screen protector to arrive. My Skinomi arrived yesterday and I installed it last night.
So if you don't want a bulky case get the Spigen Ultra Hybrid (I went with the crystal clear color). I ordered my case and screen protector from Amazon. The case is very nice looking and doesn't add any bulk to the phone.

Sk17z0 said:
but I still keep the original plastic film on
Click to expand...
Click to collapse
Oh my.

I'm using this case. It's amazing. Thin, easy to grip and not too expensive.
http://www.bodyguardz.com/unequal-shock-case-samsung-galaxy-s7-edge.html

I use the phone naked and dropped it from about 3,5 feet, first it hit the steel base of a table and than it bounced on a wooden floor, not a scratch :angel:

Juuls said:
I use the phone naked and dropped it from about 3,5 feet, first it hit the steel base of a table and than it bounced on a wooden floor, not a scratch :angel:
Click to expand...
Click to collapse
Q.E.D.