Hello,
After installing the manilla2d, I have noticed my touch is not turning off after I press the on/off buttom. The screen just blinks and the phone returns to the today menu. A warning advice pops up on its screen but after I click over the YES buttom, it blinks and comes back to the same screen. So, the unique way I can turn it off is removing the battery. So, based on this experience, could someone help me to fix it? I have already uninstalled the M2D.. Thanks! Fabiano.
Hello,
I have a Wizard g4 with hard SPL and this weekend it decided to go crazy. Here is the problem:
- When I turn it on, the screen goes white, blue and orange LEDs are lit and the device vibrates non stop. The camera white led is also lit.
- The only way to turn it off again is removing the battery. reset is useless.
- I try to put it on bootloader mode using the camera+reset and nothing happens
- Trying to turn it on with camera pressed also doesn't work
- Trying to turn it on with voice+network pressed doesn't work either
- When I connect it to charger or USB, it automatically does de same (white screen, etc) described above
I've been using Hornet win 6.1 ROM for some time and was very happy with it.
Is there any hope or am I effed?
Seriously? Nothing?
Diamened said:
Seriously? Nothing?
Click to expand...
Click to collapse
You don't say anything about doing a hardreset. Did you try it?
I know this problem has not been resolved yet. However I read that if you boot android when the keypad lcds are off, they will stay off. That is my problem. Im unable to boot android when they are off because they stay on for the duration my screen is lit, in other words, they only turn off when my screen turns dark. To wake the device up I must press the buttons which turns them on again. How did you guys work around this?
the keypad backlight is only on for about 10 seconds...
if this isnt the case you have installed a little tool that it hangs together with the lcd backlight...
my keypad lights don't turn off at all for some weird reason..
also my orange led at the top stays on always..
rmsa786 said:
my keypad lights don't turn off at all for some weird reason..
also my orange led at the top stays on always..
Click to expand...
Click to collapse
are you using the latest zimage?
http://forum.xda-developers.com/showthread.php?t=732380
You should try to look in the startup folder of windows. It might have keypadledcontrol.exe which makes it "keep on" while the display is on. Just remove it from ur startup list and you are done. now the keypad will turnoff after 10 sec (by default - configurable through registry).
I hope it sorts your problem out.
Hello there,
I have recently received an HTC HD2 from a friend of a friend of mine. It didn't work and was stuck at a black screen.
After receiving the HD2 I saw that the HD2 was in a boot loop of some sort. Every time I would turn it on it would vibrate once, and then turn off. Then it would vibrate once again and it turned off again. The backlighting of the screen would turn on, and then after a certain period of time (maybe like 5 seconds) they turn off again.
Somehow (by luck, maybe) I managed to boot the phone into windows mobile 6.5. I still got a black screen, but I could hear the sound that the phone makes after it boots windows. I then attached the phone to the computer and downloaded the latest HTC HD2 Windows 6.5 ROM and flashed it to the phone as standard procedure. Now, every time I turn the phone on I hear the sounds of windows booting up and I can connect with it using windows mobile device center. I also hear sounds when I push the buttons on the phone.
TL;DR-> Black screen, phone reacts to input.
Question: will replacing the screen fix the phone? Or is it some other component failing. Booting windows proves the phone isn't bricked, right?
Thanks in advance.
My hd2 doesnt boot without charger and with charger i have to press soft reset button to power it on. Then it boots but with black screen. I can hear the sound at the boot. Screen lights work also but black screen whole time. The problem came when i changed the lcd digitizer assembly. Lcd ribbon is ok.
same problem
i have a HTC HD2.
i just try to change the android version to COREDROID.
1st i run the SUPERWIPE.
after its install i reboot it.
and after that only BLACK SCREEN.
its vibrate but its not going forward.
can anybody help me to FIX this PROBLEM.
please
THANK YOU
ashanjn said:
i have a HTC HD2.
i just try to change the android version to COREDROID.
1st i run the SUPERWIPE.
after its install i reboot it.
and after that only BLACK SCREEN.
its vibrate but its not going forward.
can anybody help me to FIX this PROBLEM.
please
THANK YOU
Click to expand...
Click to collapse
Try installing the default ROM of the phone it might help solve the black screen problem.
so i just replaced my samsung galaxy s4’s digitizer, the phone truns on, the screen works but will not let me unlock the phone, its clearly working thp since theres a clock displaying time thats accurate, showing me battery level and the date, but i cannot do anything from this point on, no unlock bar or anything, ive tried a hard and soft reset as well as sbf’ing it back to stock with the same issue arising, im about to buy a new motherboard for it soon unless someone knows how to fix these issues. Thanks for any help in advance, Ty w
any ideas?
Does your touchscreen even work? If not, then you probably got a faulty one.
yep
Lennyz1988 said:
Does your touchscreen even work? If not, then you probably got a faulty one.
Click to expand...
Click to collapse
yes, boot logo plays just fine, cycles through the att logo screen, then goes to the lock display, heres a pic of the lock screen that displays atm, it tells me the date, time, battery level, and notification bar, and thats it, theres no response from touch input, menu and back button work just fine, as well as the power button
sikboarder said:
yes, boot logo plays just fine, cycles through the att logo screen, then goes to the lock display, heres a pic of the lock screen that displays atm, it tells me the date, time, battery level, and notification bar, and thats it, theres no response from touch input, menu and back button work just fine, as well as the power button
Click to expand...
Click to collapse
Ohh, but that's not the lockscreen.
That's the S-view cover screen.
@DeepankarS knows more about how to solve it.
sikboarder said:
yes, boot logo plays just fine, cycles through the att logo screen, then goes to the lock display, heres a pic of the lock screen that displays atm, it tells me the date, time, battery level, and notification bar, and thats it, theres no response from touch input, menu and back button work just fine, as well as the power button
Click to expand...
Click to collapse
@Lennyz1988 thank you
@sikboarder Try removing the L1 screw and starting the phone again. Or keep a magnet near you, when this appears, touch the magnet (not a strong one) neat the volume keys and remove it. When this disappears, force stop sec.android.sviewcover from the application manager.
Still if it does not help, try an AOSP rom. Touchwiz has this stupid bug.
Lennyz1988 said:
Ohh, but that's not the lockscreen.
That's the S-view cover screen.
@DeepankarS knows more about how to solve it.
Click to expand...
Click to collapse
wouldnt i have reset that after i did an sbf?
also sent DeepankrS a pm for help