Help! White screen and no reset - 8125, K-JAM, P4300, MDA Vario General

Hello,
I have a Wizard g4 with hard SPL and this weekend it decided to go crazy. Here is the problem:
- When I turn it on, the screen goes white, blue and orange LEDs are lit and the device vibrates non stop. The camera white led is also lit.
- The only way to turn it off again is removing the battery. reset is useless.
- I try to put it on bootloader mode using the camera+reset and nothing happens
- Trying to turn it on with camera pressed also doesn't work
- Trying to turn it on with voice+network pressed doesn't work either
- When I connect it to charger or USB, it automatically does de same (white screen, etc) described above
I've been using Hornet win 6.1 ROM for some time and was very happy with it.
Is there any hope or am I effed?

Seriously? Nothing?

Diamened said:
Seriously? Nothing?
Click to expand...
Click to collapse
You don't say anything about doing a hardreset. Did you try it?

Related

At times Backlight doesnt light up again - why?

Perhaps someone has an explanation why my backlight doesnt light up again when a button is pressed?
From time to time, the backlight goes dark and even though I am pressing buttons, screen, power button, etc, the backlight doesnt come back on. I have to search for the backlight adjuster (in the dark) in order to switch the light back on.
I have wisbar advanced and SpbPocketPlus installed - might that effect this somehow??
Thanks for any advice!
i have exactly the same problem and donĀ“t know a solution. ;-(
Wisbar Advance 2.6.0.1 is installed, SpbPocketPlus not.
I think it comes more often if i use the camera, but it is not reproduceable...
I've never had this problem before, I dont have wisbar installed.
You may be doing a press and hold function on your device. Quick press of the power turns it off, a long press turns off the backlight. the only way to turn it back on is to long press the power button.
also you have settings that turns the back light screen off, which may be affecting this.
This problem used to occur on the O2 XDA2i ALL THE TIME!
Just my 2 cents. Sorry, not very helpful, but defo a problem we've seen before. You hvae to go into settings to start the backlight back up.
Squuiid said:
This problem used to occur on the O2 XDA2i ALL THE TIME!
Just my 2 cents. Sorry, not very helpful, but defo a problem we've seen before. You hvae to go into settings to start the backlight back up.
Click to expand...
Click to collapse
It hasnt happened lately (actually ever I posted this thread strangely enough) but its quite embarrassing when you have to find your way through a dark screen.
I put a large symbol of the brightness adjuster in one corner (using SpbPocketPlus), so I only have to find that symbol rather then start --> settings --> etc..... its not a cure but it makes it easier switching it back on.
If anyone has a remedy for this problem, please share...
Not sure why this happens, but I fixed it using...
http://www.ppc-welt.info/community/showpost.php?p=728080&postcount=27
This app - run on your prophet, and all is back to normal. Keep a copy on your SD card...
--Tosh
didn't help
I tried and still use the neo backlight fix. But this fix is only for forcing via startup a longer measured time for the light to stay on.
I too have suffered with the problem of the backlight not coming on every now and again after starting up the prophet. I've had this problem on numerous roms too which is interesting. What more interesting is that even in the days of my owning a Blue Angel (Orange M2000, MDA) I STILL remember having this intermittent problem with the light not always coming on. Only way I fixed it was to simply soft reset the device. Whenever I did that and when I do it now, it stops it happening for week or so at least.
I still use the neo back light fix too as my phone has the quick light turn off problem without it. Neo certainly created a good fix no mistaking.
All the best
Nicholas
i had the same problem...just put the same value to the standby and backlight ...( both 3 mins on mine)...and never happened again....i think it helps...
I have a strange backlight & power-off problem on my Qtek S200:
When the backlight is switched on and I press the Power button shortly to switch it to sleep mode, the screen gets blank but the backlight does not go off.
So now I wait first when the backlight timer goes off before switching the device to sleep mode manually.
Another problem:
When the power settings is set to switch the device off automatically, it reboots when the timer goes off. So my solution is to disable the auto power-off feature.
How to fix this to the original behaviour ?
I tried the neo_backlight_fix and set the backlight timeout to the same value as the standby timeout, but with no avail.
My Qtek S200 has still the original old ROM (G4 model) and Windows Mobile 5.0:
ROM version info:
IPL: 2.10.001
SPL: 2.10.001
GSM: 02.07.20
OS: 2.10.7.25
Please help me to solve the problem.
Maybe I messed up a lot and the only solution is to install a newer ROM which is available since some time at qtek.nl.
Thanks in advance.

screen problems

I turn on the phone, then brings up the "smart mobility" as the colors are completely wrong. (white is blue) but the touch screen
works
. So I press the power button on and off, and the screen is fine but the touch does not work?
Ole Andreas said:
I turn on the phone, then brings up the "smart mobility" as the colors are completely wrong. (white is blue) but the touch screen
works
. So I press the power button on and off, and the screen is fine but the touch does not work?
Click to expand...
Click to collapse
a bit more info would help diagnose your problem. like, did you flash a custom ROM to your device? if yes, which one? i suspect you did not prepare your phone for flashing. go here ---> HD Dummies Flashing Guide follow the instructions and see if this works. hope this helps!
If it is not SW related, try pulling lcd flat cable from board and reconnect.

Problems with Keypad Lcd

I know this problem has not been resolved yet. However I read that if you boot android when the keypad lcds are off, they will stay off. That is my problem. Im unable to boot android when they are off because they stay on for the duration my screen is lit, in other words, they only turn off when my screen turns dark. To wake the device up I must press the buttons which turns them on again. How did you guys work around this?
the keypad backlight is only on for about 10 seconds...
if this isnt the case you have installed a little tool that it hangs together with the lcd backlight...
my keypad lights don't turn off at all for some weird reason..
also my orange led at the top stays on always..
rmsa786 said:
my keypad lights don't turn off at all for some weird reason..
also my orange led at the top stays on always..
Click to expand...
Click to collapse
are you using the latest zimage?
http://forum.xda-developers.com/showthread.php?t=732380
You should try to look in the startup folder of windows. It might have keypadledcontrol.exe which makes it "keep on" while the display is on. Just remove it from ur startup list and you are done. now the keypad will turnoff after 10 sec (by default - configurable through registry).
I hope it sorts your problem out.

No display on moto g4 plus...Just a black screen

It was working fine till yesterday but when I tried to open it today it is showing nothing just the black screen. It seems to be working as tried to call on the phone. I even flashed the latest rom in the fastboot mode but still there is only a black screen.
Same problem i have if you found the solution let me know please.
Sent from my iPhone using Tapatalk
is the notification LED is blinking when you connect your phone to your pc?
siddhesh9146 said:
is the notification LED is blinking when you connect your phone to your pc?
Click to expand...
Click to collapse
Yes
Sent from my iPhone using Tapatalk
Try to enter bootloader mode by pushing and holding power and Vol Down together for 15 sec
samipaswaal said:
Yes
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I think your phone is hardbricked.
try this guide : https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761
Hi all. I not sure mine is hard bricked. The screen won't show any signs of life, but the sound is there. It vibrates when booting and rings when I call my number. But the screen is dead. Just to confirm, I didn't install anything, I didn't update, and I didn't dirty flash anything. I think it just discharged. The light is blinking, but other than that nothing more than ringing, during which the screen doesn't light up. Holding vol. down + power, no matter how long, does nothing. Any ideas?
m.mishka said:
Hi all. I not sure mine is hard bricked. The screen won't show any signs of life, but the sound is there. It vibrates when booting and rings when I call my number. But the screen is dead. Just to confirm, I didn't install anything, I didn't update, and I didn't dirty flash anything. I think it just discharged. The light is blinking, but other than that nothing more than ringing, during which the screen doesn't light up. Holding vol. down + power, no matter how long, does nothing. Any ideas?
Click to expand...
Click to collapse
it should atleast show charging screen when device is off, and Bootloader screen too..
It looks more a hardware failure..
Go for service center...
____Mdd said:
it should atleast show charging screen when device is off, and Bootloader screen too..
It looks more a hardware failure..
Go for service center...
Click to expand...
Click to collapse
Hardware failure indeed. When I ring it, it actually does ring. Of course, there's no way to pick up the call with a dead screen
That screen was recently replaced and is still on warranty. I'll send it back. For now, I decided to make a good thing out of a misfortune - with my Moto G4 Plus out of action I bought myself a Moto G5S Plus. :laugh:

Black screen on my 9T

I have been using my Xiaomi Mi 9T for less than a month, suddenly it turned off; emits the battery charging sounds when I connect it, as well as the sounds on and off, but the screen is completely black without letting me access or giving me the possibility to make a factory reset, someone who can help me with a possible solution.
Thanks.
hadaos said:
I have been using my Xiaomi Mi 9T for less than a month, suddenly it turned off; emits the battery charging sounds when I connect it, as well as the sounds on and off, but the screen is completely black without letting me access or giving me the possibility to make a factory reset, someone who can help me with a possible solution.
Thanks.
Click to expand...
Click to collapse
Try to press the power button for a while, like 10 or 20 sec
Also try it this way and the screen is still off, it vibrates when it turns off and sounds when it turns on again but the screen remains black.
hadaos said:
Also try it this way and the screen is still off, it vibrates when it turns off and sounds when it turns on again but the screen remains black.
Click to expand...
Click to collapse
hey have you fix yours? i also got this problem
have you tried holding power button and volume up for a solid 20-30 secs? this has resolved the issue for me in past, but we might be having diff issues

Categories

Resources