Database Users

Pls help ti solve NO GSM problem!

Could anyone can help me to solve No GSM poblem. I think there are many other users have same problem.
After it faild during update rom, My HP6915 represent NO GSM during booting and the phone funcation also doesn't work. But in HP Asset you can see it, just no firmware, no version number. I try to flash english radio rom and french radio rom, but always stop at 1%. This matter appeared after I flashed orange rom(french version). I think it locked by Orange.
Does any one can help us?

did you try the update with no sim and no minsd?

EREZYAD said:
did you try the update with no sim and no minsd?
Click to expand...
Click to collapse
Yes, I update without sim card and minisd. Always stop at 1%

to be on the safe side i will go over general insraction
battery full
recomended xp os & activesync 4.5 (not beta)
minsd & sim out
ac addapter connected (ac power from orig transformer)
hart reset your device before the update
connect device directly to computer's usb plug
run the update
try radio only &/or the all update you can also try on a different pc
if all didn't work read this and see if you can find somthing that works on the 6900
http://www.htcwizardweb.net/node/170
good luck

EREZYAD said:
to be on the safe side i will go over general insraction
battery full
recomended xp os & activesync 4.5 (not beta)
minsd & sim out
ac addapter connected (ac power from orig transformer)
hart reset your device before the update
connect device directly to computer's usb plug
run the update
try radio only &/or the all update you can also try on a different pc
if all didn't work read this and see if you can find somthing that works on the 6900
http://www.htcwizardweb.net/node/170
good luck
Click to expand...
Click to collapse
Thank you for your reply!
I tried but still same, stop at 1% when I flash Radio WAN OS, stop at 2% when I flash Radio FS. I tried to unlock simlock and CID unlock, but it doesn't work on my 6965

called a few places looks like the radio chip is fried. sorry man...not looking good.

try update again with this method
I got almost same problem. I tried to update GSM rom but update fail and my ipaq stuck at hp invent logo. try following steps to see if it works for you
Solution:
this is what I did to get this fixed.
1) Get the battery out of the iPaq, and wait for a few minutes while the "serial" image fades away slowly.
2) In the meantime, prepare your cradle, plugged into the AC charger and plugged via USB to your PC.
3) After a few minutes, with the screen of the iPaq completely gray, put the battery and battery cap back on (with our without SIM card), and put it on the cradle immediately.
4) The iPaq should start coming back to life, as if it were being hard reset. Let is stay on the welcome screen (i.e., do not tap it or anything).
5) Restart the upgrade process, it should proceed from there OK
Thank you to origianl solution provider

I also meet such question.

actualy. I met the same problem "No GSM" after wrong update. I thing I tried everything, but I Didn't try to flash the device via mini-sd card. I don't know the right address for GSM area. Did anyone know?

caoxt said:
I also meet such question.
Click to expand...
Click to collapse
COME ON guys some one can help us , i have too the same problem please help with radio stack !!!!!!!!!

me too,, really nedd help here.. my only phone sable...

my wizard wifi won't turn on

i've had wm6.1 4 a while and the problem was that whenever i try to switch on wifi from the comm manager that round working hourglass shows and then it doesnt turn on , i dunno what happens but the symbol of wlan with the little x on it are still the same
i downgraded back to wm5 2.26 and the same problem then i installed the official T-mobile 3.08 rom and still the same problem
worthy to mention that the official ruu didnt work wz error 326 so i had to extract the nk.nbf and cook the rom again and it worked
does this mean that my wlan hardware is faulty ?
or is it a software problem ?
does anyone have the same problem? can u plz help me ?
i searched all aroud the forum and i tried to hard reset my t-mobile vario several times and still doesnt work

I'm having the same issue with my acer f900. The wifi has been sporadic, and doesn't seem to turn on with comm manager. When you go to settings/connections/wifi all you get is a configure network adapters page. All of the the settings seem to be correct, but it doesn't show any wireless networks.

the whhole forum is full of this such a questions just flash to another rom

erikvario said:
the whhole forum is full of this such a questions just flash to another rom
Click to expand...
Click to collapse
well i've tried that hundreds of times , it just doesnt do the trick still dont have wifi

Ipaq 614c wifi missing

Hello all.
I have problem with WIFI.
When I look into SETTINGS/CONNECTIONS/WIRELESS MANAGER, I´m missing WIFI there => Only Bluetooth and Phone is shown.
I try reflash radio (0.89), original ROM, some ROMs from KEYX but nothing happened
After reset to factory settings still nothing.
Could you please help me with this?
Thanks in advance

This should correct the missing WiFi issue: http://forum.xda-developers.com/showpost.php?p=3791117&postcount=191

Hi Kiemlo
Unfortunately the key is 1 already
I try change key to 0 but results is wifi missing still
Any idea ?
Thx

what happened to cause it to be missing?
did you flash the phone witha new ROM? install a program recently?
Have yuo tried doing a FULL backup then a hard reset?

Yes I think that wifi just disappear after some ROM flashing.
But I try to flash all ROMs which I have before and WIFI not appear again in no one ROM.
I try hard reset without backup(by the menu factory reset and by voice comm+power+reset) with same result - wifi missing.

Hi,
My current rom removes wifi from the list when its connected to usb or activesync. When I unplug it automatically goes back to the state it was before, either powered off or on_and_connected!
Also, use radio rom 0.89, with 0.88 and 6.5 i had no wifi, it was present in the list but could not see any SSID's.
Cheers,
Balint

Yes I know wifi can´t activate (grey text) when its plugged to USB.
But in my case don´t matter if its plugged or unplugged - WIFI option is missing(not only with grey text)
radio is 0.89 and OS is 6.5 so there is something else broken

Not that this would help much, but I had a similar issue with my 914c while using HP's default OEM 6.1 software. The Wi-Fi used to vanish from the Comm. Manager every so often. For what it's worth, a couple of soft-resets would fix the problem sooner or later (for me, anyway). I'm using Montecristo's 6.5 now and haven't had the problem since.

Yea friend soft resets - I did it thousand-times, even hard resets 1000x not help...

bluejay23 said:
Yea friend soft resets - I did it thousand-times, even hard resets 1000x not help...
Click to expand...
Click to collapse
I usually run into the same problem after ROM updates. Switch it off, remove the battery for a minute, insert the battery back in and hard reset fixes it always.
Regards

Flash original ROM with downgrading radio to 0.88

Sergious: unfortunately - this wouldn´t help.
even if yes, I can´t stand original ROM
I´m going to try Montecristo ROM
Best regards

Not working WiFi is a radio problem, not ROM. Link that i gave will downgrade your radio to 0.88, then you can flash any rom
PS. Montecristo ROM ?? It is for 914...

oh I miss that so next flashing will be with keyx roms still
I will try some flash and resets by the night ...
what goes around comes around

Hello everyone who can helps with me
I have some more informations.
After flash original HP ROM phone always show message problem with DEVICE.EXE until I disable sending report.
When i flash some KEYX 6,5 ROM this message doesn´t appear but when I look onto task manager DEVICE.EXE is mostly of the time under 90% of CPU.
With this battery is drain too quickly too.
This is may be the bad trick :/
Somebody knows it ?
THX
p.s. wifi still missing

bluejay23 said:
Hello all.
I have problem with WIFI.
When I look into SETTINGS/CONNECTIONS/WIRELESS MANAGER, I´m missing WIFI there => Only Bluetooth and Phone is shown.
I try reflash radio (0.89), original ROM, some ROMs from KEYX but nothing happened
After reset to factory settings still nothing.
Could you please help me with this?
Thanks in advance
Click to expand...
Click to collapse
I had the same problem with 23001 Beta 13.2 WWE, the WiFi was initially disappear from my Wireless Manager, then i change this : my network card connects to - The Internet (default is work), and the WiFi is now again show in Wireless Manager, but can not switch on, so after soft reset it works ok...

Zemun_PFC : thanks you for your advice - its so close to solve my issue.
I did what you say and
1) after soft restart BLUE LED blinking(means some wireless active - BT was off before restart so I suggest WIFI will be working) BUT
2) when i go to SETTINGS/CONNECTIONS/COMM MANNAGER and click on wifi -> waiting icon then nothing happened - STILL only TURN ON - BUT SHOULD BE ON already => so on/off trigger doesnt work
3!!) when I´m in COMM MANAGER and click on SETTINGS in bottom right corner I see WIRELESS LAN - this not happened before!!
4 when I´m click on it it show only BLUETOOTH and PHONE settings :/
You helped me a few with it
I must solve it

bluejay23 said:
Hello everyone who can helps with me
I have some more informations.
After flash original HP ROM phone always show message problem with DEVICE.EXE until I disable sending report.
When i flash some KEYX 6,5 ROM this message doesn´t appear but when I look onto task manager DEVICE.EXE is mostly of the time under 90% of CPU.
With this battery is drain too quickly too.
This is may be the bad trick :/
Somebody knows it ?
THX
p.s. wifi still missing
Click to expand...
Click to collapse
some of my roms (older version) had a issue when you use a2dp and turn off bt. Restart then device.exe will take most of the cpu

Keyx : yes you are right - I flash another one from you, now is device.exe issue cleared.

[Q] hermes 8525 freezes

well my phone after i flashed and installed wm 6.5 it was working totally fine, but this morning i turned it off and then on and it totally freezes at the startup screen and never loads windows. what i can do?
i'll appreciate any comments

i have then same problem switches on displays, disigned for windows mobile 6.5.5 then freezes

Yeah many ppl has this issue... be sure to flash first the att stripped att stock rom then hard reset then boots then reflash the custom rom then hardreset then try again to use th rom maybe it works ok now

I have the same problem
but I have the same problem. I bought a second hand phone and also freezes on the welcome screen and to make the rom? I need it so I can re-flash the windows

I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????

miljan017 said:
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
Click to expand...
Click to collapse
try to upgrade radio version on your device !! you can find Radio Rom Wizard in http://forum.xda-developers.com/showthread.php?t=300713 or at http://forum.xda-developers.com/showthread.php?t=268031

i cant start update proces always error 260 or 262

Jasjam Freez on i-mate logo
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck

Batman1351 said:
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Click to expand...
Click to collapse
probably you need reflash again your device with Original Shipped ROM

JasJam Freez on Logo
Dear Rahman
sorry for my bad english.Thank u for ur reply.jasjam freez on the first page!it mean i can not connect it to PC via active sync because it no load to windows!PC can not detect device!so how can i fix this problem without a PC connection ?

Kitkat update turns off radio itself (no signal) any fix avaliable?

So i have verizon g2 (using it on gsm carrier) , but i have problem . the phone radio turns off itself and i'm loosing signal... for now it's completely turned off and i can't even turn it on . tried on stock and custom roms . trying to turn it on with *#*#4636#*#* menu (on custom rom) , but it doesn't turn on ....
on stock roms it says "service disabled" and when i try to call "to call first turn off airplane mode" (when it's not in airplane mode)
is there any fix for that?
yesterday it worked normal , but now it won't
before that i tried to downgrade to older stock roms , but they were unstable , seems like it's not downgrading completely (maybe , kernel or bootloader or something like that )
Sim card works , so there is no problem !

noone?

Any solution?
jkjambo said:
noone?
Click to expand...
Click to collapse
Hey,
I've got the same problem and i don't know how to solve it..:\ did you get any help in solving it?