I followed the instructions from a gracious fellow XDA member, but my phone(titan) is stuck at the HTC Smart Mobility screen.
On startup is shows a few things in red and here is what it is:
H3BD039E2 P DCAAXAM-4350
M09 R 3.24.02
D D2.17
Please help me out, need to get this thing up and running with stock WM6.0 ASAP.
Thanks
push the camera and power button at the same time and then use your styles and press the reset button on bottom.this will put you in bootloader which will allow you to reflash the rom or try another one.
You need a 6.0 radio and not the 6.1 radio 3.24.02 you have. Try the following. ftp://xda:[email protected]/Titan/Radio_Roms/titan_2.13_CDMA.rar
Related
Hello, i used imei-check's program to unlock my phone, i did a hard-reset and then i used the PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap.exe. I did executed it on my pc, and there was a dos window saying something about waiting some minutes and everything was fine. After ~10 minutes, i was seeing that nothing was going on on either my phone or my pc, so i did reset the phone and closed the dos window. But since then my phone stays on the HTC screen, displaying the following
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 1.28.0.0
I tried to download a small rom from my manufacturers site and i did went onto bootloader screen, by holding the upper left and upper right buttons and then the reset button, and i did flash the new small rom, but it keeps staying there. Is there a way to flash the original rom back in ?
PLEASE HELP ME !
PS : How do you hard-reset using the hardware buttons ?
To do a hard reset.
Press both soft keys and insert stylus into soft reset button and press.
Release the soft reset button and keep pressing the soft keys.
When the "This operation will delete all your personal data, to manufacturer default" appears on screen.
Press Green call button to restore manufacturer default, or press other keys to cancel.
The bootloader is invoked by pressing down the Power and Voicedialer buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears.
from http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
even the hard reset, isnt bringing the phone back to life. what should i do ?
i think you should enter into bootloader menu connect you ppc with usb to your pc and flash it with the original shipped rom that you had before or if it's unlocked with any original shipped rom... It is the only way...
how can i flash my original rom ? is it included on some of the cd's it was shipped or ?
no ... there was on an ftp but now it is down... Maybe someone who has it can upload it in rapidshare .... What brand has your artemis? HTC, Dopod??? Leave some info in order to get the right rom... if noone help you until tommorow i will upload an original HTC Rom(right now i can't) if it works on your ppc...
It is an original HTC phone aye, so there isnt a way to find a rom like this out in the open ?
I DID THE SAME!
Please someone share the original rom for MDA Compact III T-Mobile UK!
It can be anything to fix the device.
Pleeease!
P.S.
Is there any software to dump a rom from other device?
I have access to my firend's MDA and possibly could use his to get a copy.
You guys seem to have the same problem as me
http://forum.xda-developers.com/showthread.php?t=294551
I have already download all the original ship ROMs from XDA-FTP but no luck to try any of them on my device. It always said "Invalid Model ID". Some people said, the CID area was damage and the only way I can do is open my device and use jtag interface to directly flash my ROM without access to bootloader. I am now trying to do that and the last chance is to send my phone to Imeicheck (Glasgow, Scotland) to get it fixed.
Anyway, if you want any of these ROMs please email me ([email protected]) and give me your FTP so I could upload them. Sorry cannot send over email because they were big (~40Mb).
Just upload them on rapidshare and send me a private message with the links. If i dont get it to work, i am gonna send it back and get a replacement.
Same problem
I also got the same problem as you are, not even a hard reset helped me to start the p3300 ... My device is not CID free so i can flash only the htc italian rom into it (i had italian language in my device) and i can't find anywhere a rom with italian language so i'm stuck and i don't know what to do ... ( i tryed flashing all the roms found on FTP but my p3300 won't accept any of them )
If anybody got an ideea how to fix this problem or got a htc rom with italian please upload it somewere
Thanks
ducva said:
You guys seem to have the same problem as me
http://forum.xda-developers.com/showthread.php?t=294551
Anyway, if you want any of these ROMs please email me ([email protected]) and give me your FTP so I could upload them. Sorry cannot send over email because they were big (~40Mb).
Click to expand...
Click to collapse
Yes, just upload to rapidshare plz. as I have no ftp.
A R T E M I S_____W W E_____H T C___O R I G I N A L_____11240501_____026790 H E R E
djsolid said:
A R T E M I S_____W W E_____H T C___O R I G I N A L_____11240501_____026790 H E R E
Click to expand...
Click to collapse
THANK YOU SOOOO MUCH
I got it and plz. keep fingers crossed...
...5 mins. later...
so close... invalid ID...
I thought it would work. I unlocked the device with imei-check before the accident and thought I can use any rom.
Is there someone that have the T-Mobile UK original rom and would be so kind to upload it please?
Thank you djsolid again very much!
Adigital said:
T-Mobile UK original rom
Click to expand...
Click to collapse
I will try to upload this Rom to... If this doesn't work i tihnk that you should send you device to the service center...
QUESTION (a little off topic) : Are mods ok with rapidshare links?or not?
Another Question (a lot off topic) : How about writing a guide about everything that concerns artemis, for newbies... i am a noob to, and i am looking for others to write down a guide about useful tasks such as unlocking unhiding,customizing extrom, making themes,must have progrs with simple steps so that we can understand... Write them down in one place and when they are final upload them on the wiki site... Is anyone in??? Please send me Pm if you are interesting in order to open a new subject in the forum...
djsolid said:
[...]
Is anyone in??? Please send me Pm if you are interesting in order to open a new subject in the forum...
Click to expand...
Click to collapse
Yeah! I'm in. I will describe my way to get the device back to live - if I ever get it.
So far I got information that seems to be quite important to those that are stucked on Invalid ID error.
Apparently the ROM named ART_DOPODASIA_10270701_024190_WWE_TEST works for all model IDs.
So share please.
H E R E___I T___I S
T--M O B I L E___O R I G I N A L___U K___11311001_024990
You're a star!!!
It is alive !
The original ROM worked at last! And here is the story:
1. Bought IMEI-CHECK and unlocked the MDA Compact III
2. Flashed with PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap.exe (with device on Today screen)
3. The process started and stuck on "uploading file [don't remember] and as the instruction said I reseted the phone after 30 minutes.
4. T-Mobile splash screen, version infos and that's it.
5. Tried to flash again in bootloader mode but the device was not visible by PC
6. Thankfully to djsolid tried to flash with HTC Original and ended up with Invalid ID
7. Flashed with the original ROM from T-Mobile UK and it is working now.
I am not sure when I will try to flash it again
Well, my phone is alive again, thanks to http://www.pdamobiz.com/show_news.asp?NewsID=74701&PN=1
I have flashed my phone with the dopod rom, and it worked ok, and then i flashed the Powermap one, and it works fine.
ROMS
Hello,
I have just bought myself an Xda Orbit, and previously have had Exec, Blueangel etc but was gutted to hear about Micro$oft and their action. i am very keen to customize my phone and ext rom etc just like i used to do and wrote about last year so i am willing to create a new website and will host myself and have all the roms available as a download for all to share BUT i need the roms. i have just downloaded from rapidshare the t-mobile rom and will download the ext rom from this ftp site but i need more roms and any programs that are useful i will host on the site and just link it to this site for downloading. i am not sure how to host ftp but i can learn....
let me know if this will be useful and i will get the ball rolling in getting an address and hosting account. thanks
hi all ..
I did flash my HTC wizard with new rom after finishing the install the device reboot and stacked on the boot screen then I tried to go to the boot screen but I couldn't , I tried to make hard rest but also I coudn't nothing is working even charing the device cant be made .
bye bye
Are you able to get to a multi-colored screen with numbers?
In case you don't know, to get to the bootloader screen hold down the camera button and press the power button.
now i got the same problem.
I updated the rom & now i have the multi-colored (red/green/blue/white) screen
with RUU - IPL 2.18 - SPL 2.18 - USB on it (Qtek 9100)
I downloaded the tools from Vippie in the thread "How to flash a new ROM to your Wizard... a little tutorial!" but those won't help...
anybody got any advice? I would like to install WM6...
thanks in advance!
I brick my phone ,now ,white screen start, not enter sys,can be link by pc!!please give a newer uspl!!thanks....
Hey buddy, can you give a little bit more info. Were you trying to flash your phone? If so, did you the PDF directions?
white screen experience
Brief experience:
1, my phone is the original shadow , English system.
2, would like to refresh the Chinese
3, in the absence of support shadow that use the Dopod c730'uspl refresh the shadow'uspl, lead white screen
4, the current machines can not be normal start, the start-up is white screen ; hold down the camera key and link usb phone can be connected computers, and can access to refresh uspl interface.An error come when use the latest uspl of shadow refreshing ," this update utility cannot be used for your shadow ,please get newer update utility"
Turn of your phone, press the two soft keys and press the power button, then let go of the power button while still holding the soft keys. Then you will get into the tri-color boot screen. Then try to flash your phone again.
He says that he had flashed the wrong SPL.
The SPL is for HTC S710(vox) only,but he flash it into his T-mobile shadow.
The SPL still at work, can be connected with MTTY
but can not reflash official rom with RUU.
hikei say right
As the situation heiki said, master guide
who can help me!!
please help me!!!who can make a rom for my shadow!!!
Don't listen to previous posts
The Previous posts on how to fix this porblem are not correct. If your shadow gets a white screen, or will not boot windows fully, you will have to either reset the OS to defaults, or reinstal OS completely.
The First option is to Reset the OS to default this can be done by following these steps:
1. turn off the phone
2. Press and hold the two soft keys that are right below the LCD screen. (These are the keys above the Home Key and the Back key)
3. While holding these keys, press and release the the power button, this should turn on your phone, if not try again. (do not keep holding power key, but continue to press the soft keys)
4. A screen will then appear asking you if you want to reset your phone, press the Send key (The Key with the Phone on it)
5. The OS will then begin to reset. If this does not work, follow next option.
The Second and only other option is to perform a rom flash. You will need the original tmobile shadow rom. I've tried with several hacked roms, and they never finish while doing this. Download original rom from here:
http://wiki.allshadow.com/index.php/Downgrading_to_WM6.0/_Neo_on_the_Shadow_2007
Now you are ready to fix you problem.
1. Turn off you phone
2. Press and hold the Camera Button on the side of the phone. (press no other button with it)
3. Now press and release the power button (phone should now turn on, if it does not, try again. Do not release the phone button)
4. After phone turns on, it will then show you a Colored bar screen, this is knows as the Boot Loader screen. It has a similar purpose as the Boot Loader and Boot Select screen that is seen on PC computers.
5. Place phone down in secure location, and connect to your computer. (drivers may install after connection, let them install before moving on)
6. Open the Shadow Rom update utility that you downloaded before and follow prompts.
7. Once update completes you are now ready to use your Shadow Again. If you want a different Rom, go ahead and download and follow instructions for installing that rom.
Things to avoid this in the future:
1. ensure you are updating rom with phone on a secure surface, ensure it will not fall and disconnect from Computer during update.
2. ensure battery is full
3. use roms tested and validated by other users. Read reviews of problems and known issues.
4. Use tested, validated, and/or signed apps. (ensure apps are meant for smartphones with QVGA and windows mobile standard. Generally this is not a problem, but better safe than sorry)
So that is a step by step guide on how to fix your problem. good luck
Will this also help me?
Zephnath,
I'm pretty ignorant when it comes to my phone, but I upgraded to WM 6.1 a while ago. If I follow your steps to re-load the original rom will it also go back to WM 6.0? If not, do you know how I can change my phone back to WM 6.0?
okiesho said:
Zephnath,
I'm pretty ignorant when it comes to my phone, but I upgraded to WM 6.1 a while ago. If I follow your steps to re-load the original rom will it also go back to WM 6.0? If not, do you know how I can change my phone back to WM 6.0?
Click to expand...
Click to collapse
Sorry to keep you waiting, but if you follow the steps above and you use the rom downloaded from this link http://www.sendspace.com/file/thvf9u you will have your phone set back to the original rom issued by t-mobile.
If you installed, or tried to install a rom not from tmobile, you will have to follow the second step I provided.
If you have not attempted, or do not have a rom that is not from t-mobile, then follow step one.
If you are not sure, follow step two, by first downloading the file I posted a link to above
Edit: Following these steps will put you back to Windows Mobile 6.0
So you're saying that the SPL from the OEM rom will overwrite the SPL from the Vox? I always thought that flashing a SPL from the wrong phone would brick it for sure with no takebacks.
tonyc0642 said:
So you're saying that the SPL from the OEM rom will overwrite the SPL from the Vox? I always thought that flashing a SPL from the wrong phone would brick it for sure with no takebacks.
Click to expand...
Click to collapse
What I am saying, is that following these steps will get you out of the whole with the white screen of doom, if you follow them. I've done this on not only one shadow but on two, several times. When going back to original rom, it works just like it did out of box. (Slow and clumsy) But at least you have your phone back, and with MyFaves again.
When you go back to the original rom, provided via the download link from previous post, the phone is as it was when you first got it. (Including the SPL, so if you want to flash a different rom on the phone you have to unlock it all over again.)
People have done this many of times. Often people have hardware problems and need to send the phone back for warranty fixes, but waite, they flashed their rom to 6.1. That voids their warrenty. So what do they do now? I know, they flash it back to 6.0 using the official update (the link I included) that t-mobile provided. They send their phone back to manufacture and get their replacement as if their old phone never saw a different rom.
please guys l really need help from you guys. l have t-mobile htc arte110 and when powered on it hangs on and it can't boot on.
spl 1.13
please could some help me to make it boot and come to its original state?
thanks a lot help me out........thanks.
I couldn't understand if it turns on or not,
does it show the first screen? if yes you can try a factory restore..
T-Mobile Germany? UK? NL? ...? you will need to know that to know which ROM to flash with your locked SPL.
Flashing a NEW Rom:
Try by pushing and holding REC + POWER buttons,
Then press and hold for a second RESET
Release RESET, but keep REC + POWER held
3 colours screen will appear.
Try flashing your official T-Mobile Factory Rom
your SPL is locked, so just the original factory rom can save you.
Have a look here for more details
http://forum.xda-developers.com/showthread.php?t=638038
Good luck
Hi I've Instaled Canon Yang hspl..and rom but need to get back to stock my wife doesnt like the mod any help thnx in advance...
Which phone do you have:
The Blue phone is the Wing..
Any other color is the HTC Herald..
For Wing
For Herald
Download the appropriate Orig ROM and then connect your phone to the computer. Next, Go to soft reset the phone but hold the camera button in until you see a Red/Blue/Green/White screen. Look for the letters USB in the lower left hand corner. If you see this, then you can run the .exe file and the flashing will begin. Just follow the directions on screen.
Remove Hard SPL from bootloader
Hi,
Anyone out there knows if we can remove hardspl from bootloader of Wing. Problem is my mobile displays splash screen, then switch offs by itself. Its been quite some time that I have hardspled it and have been using it. But recently I am facing this issue, so I am trying to move to original RUU and try if it works.
So for that anyone knows if we can remove hardspl from bootloader, because I am only able to enter bootloader. Moreover I tried several original roms from Flash Center as well as through SD card as well, but still be SPL version is 4.70.yang. Anyone knows any other alternative.
Also, if anyone has faced similar problem then kindly advice how you resolved.
Thanks in advance!
Regards,
Pankaj