Hi,
Recently my pda(k-jam) fell from my pocket and it hanged. I did a soft reset but I get this error message "Press Send to restore factory defaults, Other keys to quit"
I tried all keys but in vain. I then did a hard reset by pressing the comm and the voice dial. (did a reset with my stylus). I still get the above error message.
Does anyone have any suggestion or idea how to reset my pda?
Thanks alot.....
Y dnt u flash it with a new Rom look around the forum for the new MOSKI ROM.
Thanks
Thank you for your suggestion, I will think of upgrading to molski.
But will it upgrade ? As a hard reset also doesnt seem to work and how do I get to reach the ROM if I am not able to see the other things?
Thanks
Please help...
Hi ,
I am a newbie and so would seek alot of help. Thanks in advance...
Couple of days back my pda fell and now after soft or hard reset the screen still shows this "press send to restore to factory defaults, other keys to quit"
I would like to upgrade to molski but they say I might have to downgrade my rom but I must first unlock the device. There are g3 or g4 device..how do I know what device my k-jam is...g3 or g4? How do I follow up or know?
Could anybody give me the link or solve my problem? As my k-jam just wont pass that screen..I tried looking into various topics but couldnt go about the first step I should be taking...
Please help!
Thanks
Hi,
Please help..after hard reset, it still does not happen to load into the factory defaults... I cant flash my ROM or anything ...as it wont progress further than that screen ... "Press Send to load factory defaults, or quit"
Anyone have any suggestion?
Hold down the camera button while resetting it. If you can get it to the bootloader (three color screen), you might be able to flash it with something and possibly rescue it. It does, however, sound like you might be screwed. Things break when you drop them, including plastic phones.
hi
Thanks but if I have to do a hard reset, I would already be holding the comm manager and the voice dial with the stylus to reset. Do I hold all the 3 buttons together while hard resetting ?
I have tried all the buttons after doing the hard reset but just doesnt get to the other screen.
Thanks for your help.
Hold down the camera button, Power Button and Pin in the hole. First relese the hole, then release the power button and keep holding the Camera button dis will bring the Tri-colour screen. There'll be some info. like IPL n SPL der
If IPL n SPL are like:
IPL 2.xx.xxxx or 1.xx.xxxx
SPL 2.xx.xxx or 1.xx.xxxx then ur device is G4.
if its like:
IPL 2.xx or 1.xx
SPL 2.xx or 1.xx then ur device is G3
if its G4 you need to CID Unlock that before upgrading it.
All the LUCK. Go Ahead.
Hi
Thanks,
I tried your steps but it still wouldnt work. But somehow I did the switch below the comm button and it showed me the screen to the somethign HTC innovation or like that.
I think I had to tinker with the switch below the button to get the screen working.Thanks for your help.
Dear All,
Help Required,I m Trying To Load Hard SPL From Diamond.After Load My
HTC Juno is dead & Couldnot Start in Bootloader Mode.
Please Help Me To BootLoading Again.............................
I'm sorry, but I don't think it's possible. You're not supposed to use the HardSPL from one device to the other because it is meant for that specific device and only that specific device. You probably have bricked it.
The only thing you can try is to attempt to start the bootloader mode. Hold down the camera button while turning on the Juno and keep holding it after you've released the power button. If the 3 color bootloader screen comes up, you can flash the official T-Mobile ROM, but I don't think that's possible because you tried loading a Touch Diamond SPL onto it.
Thanx ND4SPD,
I Tried To Enter Bootloader Mode But Failed.
Any Advice will be appreciated.
you have to try JTAG mode
tramuyo,
Thanx For Reply.
What is JTAG? How I Use It? Please?????????????????
I've got a "Brick" HTC Magic - Vodafone.
Basically, when i press the power button doesn't start. It happened after follow the "Install / Update SPL" ( http://code.google.com/p/android-roms/wiki/SPL ) guide.
Is there any way to recover it? or should i put it on the bin?
You're going to have to be more specific than "it doesn't start".
Does it turn on? If so, does it hang at the htc magic screen? Can you hold vol-down and press power (while still holding vol-down) and load a screen with three androids on skateboards? If you can do the last step, it's not bricked, and you should look at the thread I have below about bricking and semi bricking, one of the users on there gave a great amount of information on what you can do if your phone's not working right (bricked).
Caid.
444
Caid444 said:
You're going to have to be more specific than "it doesn't start".
Does it turn on? If so, does it hang at the htc magic screen? Can you hold vol-down and press power (while still holding vol-down) and load a screen with three androids on skateboards? If you can do the last step, it's not bricked, and you should look at the thread I have below about bricking and semi bricking, one of the users on there gave a great amount of information on what you can do if your phone's not working right (bricked).
Caid.
444
Click to expand...
Click to collapse
Hi Caid, thanks for the reply! sorry for the short message without details.
Here is the answer for your first question (sadly, the rest of questions can be skipped):
Does it turn on?
It doesn't
It was after follow the guide i mentioned before. I tried to update the SPL, but something went wrong and my phone didn't turn on again.
So... I think I have to accept the fact is not going to work again.
Is there any kind of service able to fix this?
Anibal
No display at all? no backlight on the screen? no vibration (signifying it's past a certain point in the loading stage)?
You probably tried taking out the battery for 10 seconds and then putting it back?
As Caid444 asked, tried holding Back+Power for a few seconds (after making sure power is off and not just hanging. Take off battery for 10 sec and reload)? Tried holding Home+Power after making sure power is off?
please i need some help htc touche cruise
hi everyone. I have a big problem with my htc touch cruise when I installed a hard spl htc dedicate a Diamond.donc I had a white encrant after I did a hard reset since my htc no longer I have a black encrant are neither green nor orange but when I connect with the pc I am data interface and it does not recognized my htc. In my pay is not qualified repairman three non réparé.aidé unable to please me I tried the commands mtty.exe but does not c I do not really know how it works.
thank you for your patience and for help
parrot5 said:
No display at all? no backlight on the screen? no vibration (signifying it's past a certain point in the loading stage)?
You probably tried taking out the battery for 10 seconds and then putting it back?
As Caid444 asked, tried holding Back+Power for a few seconds (after making sure power is off and not just hanging. Take off battery for 10 sec and reload)? Tried holding Home+Power after making sure power is off?
Click to expand...
Click to collapse
I'd really like to say it DOES something... but it doesn't . I tried Volume down + power, back + power and several more combination always taking out the battery and putting it back.
It's bad... Do u know if there's any hardware service for this?
Just a wild guess, but since the phone sucks more battery, then a vampyre on rampage.
Could it be an idea, to charge the battery before, or have the usb cable pluged in, when you press back+home? (the same buttons you used to enter fastboot)
I'm pretty sure what you're trying to say is, you know enough about the phone to know how to bring it into it's multiple boot options, and none of them make the phone even burp. So there's no need to tell you to press this button plus that button, or insert usb or remove usb, or battery or such, because you've already done all that.
Well, I'd have to agree with you that it's dead. Unfortunately, there's nothing to do at the moment. I'm guessing (or maybe just hoping) that in the future there will be an unbricker for our phone, much like those available for many htc branded winmo phones. In the meantime, how old is your phone? Can you still bring it back?
Caid.
444
p.s To anyone else who's trying to figure this out, let's assume that he's already tried the many variations of recovery procedures and that it's still not working.
argc79 said:
I've got a "Brick" HTC Magic - Vodafone.
Basically, when i press the power button doesn't start. It happened after follow the "Install / Update SPL" ( http://code.google.com/p/android-roms/wiki/SPL ) guide.
Is there any way to recover it? or should i put it on the bin?
Click to expand...
Click to collapse
If it's really a brick and we all want to learn something from this then we need to know the following :
1. What was your original SPL
2. To which SPL did you "try" to upgrade? (I hope you didn't try to flash a G1 SPL on your Magic...).
Amon_RA said:
If it's really a brick and we all want to learn something from this then we need to know the following :
1. What was your original SPL
2. To which SPL did you "try" to upgrade?
(I hope you didn't try to flash a G1 SPL on your Magic...).
Click to expand...
Click to collapse
That's how my brick arrived ! Tried Hard SPL, after installing the one you suggested. Yours okay, Hard SPL no. But even after installing the spl, no fastboot adb.
BRICKED by HARD SPL ( the recommended )
Same here, I have just bricked my new vodafone HTC Magic (Vaffanc...)
downloaded from here: http://code.google.com/p/android-roms/downloads/list?q=label:SPL
I hope something can be done. It is not reacting to power button at all.
Amon_RA said:
If it's really a brick and we all want to learn something from this then we need to know the following :
1. What was your original SPL
2. To which SPL did you "try" to upgrade? (I hope you didn't try to flash a G1 SPL on your Magic...).
Click to expand...
Click to collapse
I think you are right, I have flashed the G1 SPL. But the page is really not clear, it start speaking as Dream/Magic and probably it is only for Dream. Since it says to apply the Hard Spl and in the download link(http://code.google.com/p/android-roms/wiki/SPL) there is no clue that it is not for the G2.
Any idea? anybody got it changed from the shop with no problems? (mine is vodafone in the netherlands)
Me idiot, I have to leave tomorrow for holidays!
byronhero said:
I think you are right, I have flashed the G1 SPL. But the page is really not clear, it start speaking as Dream/Magic and probably it is only for Dream. Since it says to apply the Hard Spl and in the download link(http://code.google.com/p/android-roms/wiki/SPL) there is no clue that it is not for the G2.
Any idea? anybody got it changed from the shop with no problems? (mine is vodafone in the netherlands)
Me idiot, I have to leave tomorrow for holidays!
Click to expand...
Click to collapse
as far as i can see no need to flash spl on vodafone magic. i have the same phone and all i did was root with Rav1.1.1G.img and flashed rom of my choice. you have flashed phone with g1 spl and it actually says g1 on the link you provided..........can't see how you missed it. with phone off press home+power button as that bring up recovery image. Rav image file is safer due to that. i am sure if hardspl was available for Magic it would be posted on here as a sticky
hi
all
i have been recevied new htc magic phone from vodafone on line contract . after i done hardspl my device gone blank not power back on . and change amber light it working .... but i cant power on my device how can i reset device with go gui mode ? i had update hardspl from follwoing link http://code.google.com/p/android-roms/wiki/Install_Hard_SPL . i cant take it vodafone shop becoz just week before same happen so this is my second new phone . please help me if know any other idea
thank you
dana
thanant said:
hi
all
i have been recevied new htc magic phone from vodafone on line contract . after i done hardspl my device gone blank not power back on . and change amber light it working .... but i cant power on my device how can i reset device with go gui mode ? i had update hardspl from follwoing link http://code.google.com/p/android-roms/wiki/Install_Hard_SPL . i cant take it vodafone shop becoz just week before same happen so this is my second new phone . please help me if know any other idea
thank you
dana
Click to expand...
Click to collapse
You did brick one with the hardSPL and now you bricked another with the same stuff? Didn't you learn the first time? Only way is to go back to the store and tell em you did it again.
thanant said:
hi
all
i have been recevied new htc magic phone from vodafone on line contract . after i done hardspl my device gone blank not power back on . and change amber light it working .... but i cant power on my device how can i reset device with go gui mode ? i had update hardspl from follwoing link http://code.google.com/p/android-roms/wiki/Install_Hard_SPL . i cant take it vodafone shop becoz just week before same happen so this is my second new phone . please help me if know any other idea
thank you
dana
Click to expand...
Click to collapse
It seems to me you need to go back to basics and start here
A noob question but what exactly does flashing a new SPL unlock.
I got my Vodafone UK HTC magic and simply Downloaded a 32B ROM and used nandroid backup to apply the update.zip and it installed fine and can use Root required apps.
hi all
My HTC magic was bricked after update SPL. Now when press power button, it stuck at HTC magic logo, anyone have solution for fix its?
I Can not understand how can this be possible. Why guys all of you, don't read before trying to change your SPL???? You even don't need any changes about it?! Why do you try to change the SPL? Do you know what that SPL does? I think most of you - don't.
My next question is why all of you are trying to flash the G1 SPL onto Magic phone? Are you crazy or what? There is NO HARDSPL for Magic (G2, Sapphire or whatever you want to call this device)!
The SPL collection is posted in this forum by Amon_Ra, and if someone want to change the SPL can do this by downloading some of the SPL collections posted here.
say2k said:
hi all
My HTC magic was bricked after update SPL. Now when press power button, it stuck at HTC magic logo, anyone have solution for fix its?
Click to expand...
Click to collapse
Power off your phone! Then press and HOLD the "back button", while holding it press once the red one(which you usually use to power on the phone). It will power on (i hope). If you get in fastboot mode then everything will be fine.
I followed the instructions from a gracious fellow XDA member, but my phone(titan) is stuck at the HTC Smart Mobility screen.
On startup is shows a few things in red and here is what it is:
H3BD039E2 P DCAAXAM-4350
M09 R 3.24.02
D D2.17
Please help me out, need to get this thing up and running with stock WM6.0 ASAP.
Thanks
push the camera and power button at the same time and then use your styles and press the reset button on bottom.this will put you in bootloader which will allow you to reflash the rom or try another one.
You need a 6.0 radio and not the 6.1 radio 3.24.02 you have. Try the following. ftp://xda:[email protected]/Titan/Radio_Roms/titan_2.13_CDMA.rar
So a friend have a problem with a ROM, and i decides to flash rom radio and with an other ROM and when i'm flashing HD2 freezing and lock at 53%, i trying to flash with any others Roms and i have a big problem, hd2 no reboot,, and no reboot in bootloader mode too after :S
i trying the Hard Reset manual and nothing !!
Who can help me ???
Sorry for my bad english!
Friendship Kindly.
if you can't get into bootloader then it is probably dead.
So volume down while pressing the reset key doesn't do anything?
If you plug it into a charger does the red led come on?
What version hd2 is it?
Thank's for your answer so,
i can't make it in bootloader even if i press volum down button and press the end key, he does nothing :s but he return in bootloader mode one time / 50 ...
when he connect to a source i don't see the red led for charging batterie :s
and i don't know what is this model, it's an HD2
And the last time i boot it, it's written Software uptade fail, try again with a /!\
If its a US T-Mobile one (has T-Mobile at the top and green & red buttons at the bottom) then its most likely that the radio he has flashed to it is the wrong one.
If this is the case, then there is no fix.
Otherwise, its best to see if you can send it back for repair