Hi Everyone
Past two days I am having prob with MMS which used to work well and all of the sudden it stoped working and giving me error message saying...
Unable to send the message and your message will remain in outbox.
Is there anyone else from Dubai having same prob ?
I checked with i-mate support already, they dont have any clue about it, even did the hardreset nothing works, they send me a cab file for Etisalat installed it still no luck.
There seems to be some issue between i-mate and Etisalat, so for now with i-mate MMS wont work...
They are negotiation thats what I got from i-mate support after they asked me to hard reset the device with latest ROM twice.
MMS works with me!!
I have tried the MMS and even sent a Vcard thru. You may first configure the Connection settings.
Rename Work selection and change the setting further by entering the ID and PW as "mms".
Select it to use GPRS and then I reckon it should work.
Good luck...
Did you tried sending MMS in past 2days?...
It used to work fine and all of the sudden it stoped and I went to FONO where we checked with couple of other imate devices to, it didnt work.
I did tried with the settings which you are talking about... If I try to just connect this mms setting without sending MMS message it does get connected to the network tru GPRS but not sending messages.
I have an unlocked Cingular 8125 that I am using on TMobile. I can't seem to figure out how to get my Data plan working on it. Can anyone explain what settings I need to change, i.e GPRS and MMS. Thanks.
For GPRS/EDGE setting in T-MO USA do the following:
Press start then go to settings then connections and then connections.
Then add new modem connection
Under select a modem pick cellular line. then click next.
Under phone number insert internet2.voicestream.com
no no no......internet2 will only cause problems later on.....here just do the following....
Hard Reset your device after which before it starts installing all of the cingular customization quickly soft reset (This is where it sayd installing applications in 3...2...1..)
After you soft reset just install the files in the order I have them listed saving the registry cab for the end. Once you have done all this press and hold the power button until it says "data loss can occur...blah blah balh" hit OK and the unit will switch off. When it switches off count 3 and just press the power buton one time to turn the unit back on.
You should be in the clear now.
lvlolvlo said:
no no no......internet2 will only cause problems later on.....here just do the following....
Click to expand...
Click to collapse
What do you mean internet2 will cause problems later on? I used to use internet3 here in New York, then all of a sudden I could not connect to the internet using the GPRS unless I was in say Washington, DC. Upon on reading something in a chatroom regarding various settings, I saw the internet2 specified, and switched the official tmobile cab set network obtained from club imate from internet3 to internet2 and it has worked ever since. But I have noticed when traveling up and down the Eastern Seaboard that I do have to change the setting.
wap.voicestream.com is T-Mobile's main data line....from there you get to hop onto internet2 or internet3. It is best to have it set to wap.voicestream.com as you would benefit from this the most.
The reason why I said it would cause problems later on is that what if T-Mobile changes something or applies some changes (like reserving internet3 only for VPN customers) then you would be effected by this change.....so it's better to leave somethings default but tweak the hell out of the rest of th deivce!
A note about internet3....this is reserved specifically for those indivduals who have added VPN access to their accounts...you know the plan that allows you to use VPN access i think it's an additional 5$-10$ more per month....
you are probably right about the wap.voicestream.com I just posted what works for me. thanks for the cab, i will probably use it after i do a future rom upgrade.
no no no......internet2 will only cause problems later on.....here just do the following....
Hard Reset your device after which before it starts installing all of the cingular customization quickly soft reset (This is where it sayd installing applications in 3...2...1..)
After you soft reset just install the files in the order I have them listed saving the registry cab for the end. Once you have done all this press and hold the power button until it says "data loss can occur...blah blah balh" hit Ok and the unit will switch off. When it switches off count 3 and just press the power buton one time to turn the unit back on.
You should be in the clear now.
Click to expand...
Click to collapse
any specific area i should install this on the phone? folders? thanks.
1. Download the file
2. Unzip the file
3. Right click the folder just before you see the files and make it "Read Only"
4. Transfer to device (I personally like keeping them on a storage card)
5. Open File Explorer and install one by one
a. Tap on file
b. Leave default setting of installing to Device
c. Tap Install
d. Tap OK (top right corner after successful install)
e. Repeat a-e for all cab files
6. Press and hold down power button until data loss message box comes up
7. Tap OK (unit will now power-off)
8. Power unit back on....enjoy life....
Although I must say you should consider flashing your device with the iMate 2.16 ROM....I have it running and I'm loving it! If you don't need it at least consider flashing your device with the original T-Mobile ROM available here. What's the point of doing either...
iMate - Faster, included Java support, AKU2 (MS Security/Push Technology)
T-Mobile Original - Other than physical appearance your device will function just like a stock T-Mobile MDA
i have the latested tmobile rom, can i just flash the iMate 2.16 ROM? what else do i need?
hi, i just updated my o2 mini s to the new rom from o2 uk.. ive been able to conect to tzones before.. now i cant.. PIE will stay at Locating before popping up an error message.. anything i can do to fix it? or get my tzones working again? thank you
the same for Cingular 8525 for t-mobile US
Will the t-mobile file in the previous message install t-mobile settings to work on an unlocked Cingular 8525? If not, does anyone have the settings? I could not get the ones at t-mobiles US or UK site to work. I will be brave and install while in Windows Mobile 5 (against my better judgememt)
Thanks!
FYI:
I did not hard reset it but simply installed the files in the order within the zip. I did get a waring on the registry edits.cab about being designed for an earlier version of windows. Anyway, I did the Power + OK button reset. Upon loggin, the HotSpot Login shows in the Connections and I was successfully able to send a MMS message my gmail account!
Thanks
I'm happy and relieved to say that this still works. I just updated my cingular 8125 with t-mobile service. Thanks lvlol!
lvlolvlo said:
1. Download the file
2. Unzip the file
3. Right click the folder just before you see the files and make it "Read Only"
4. Transfer to device (I personally like keeping them on a storage card)
5. Open File Explorer and install one by one
a. Tap on file
b. Leave default setting of installing to Device
c. Tap Install
d. Tap OK (top right corner after successful install)
e. Repeat a-e for all cab files
6. Press and hold down power button until data loss message box comes up
7. Tap OK (unit will now power-off)
8. Power unit back on....enjoy life....
Although I must say you should consider flashing your device with the iMate 2.16 ROM....I have it running and I'm loving it! If you don't need it at least consider flashing your device with the original T-Mobile ROM available here. What's the point of doing either...
iMate - Faster, included Java support, AKU2 (MS Security/Push Technology)
T-Mobile Original - Other than physical appearance your device will function just like a stock T-Mobile MDA
Click to expand...
Click to collapse
100% Correct use the wap.voicestream.com and follow the instructions above
Thanks lvlolvlo
Hey lvlolvlo thanks for the tmobile file....really helped. I spent a lot of time googling settings with no luck, i tried calling tmobile with no luck....but your post really helped. thanks!
Sorry if this is a horrible question but...
When trying to flash my 8125 I'm receiving an invalid vendor ID message and I'm told the updater can not update my device.
Any help would be awesome.
Thanks :: M
help
ok. ive been reading these posts all week and still need help. i have a 8125. i do not have cingular, i have tmobile. i have unlocked the phone. when i had my tombile phone i paid for pic and vid txts and AIM. i didnt pay for internet. how did i change the settings on my 8125 so i can send and reiceve pic and vid txts. i have tried following almost every step ive read and cant get it working. ive called tmobile and they have sent all types of IP numbers andect. but i have know idea where to input them. every despription isnt how i see it on the phone. someone plz help.
dan wilson
help me too
mrdanboone said:
ok. ive been reading these posts all week and still need help. i have a 8125. i do not have cingular, i have tmobile. i have unlocked the phone. when i had my tombile phone i paid for pic and vid txts and AIM. i didnt pay for internet. how did i change the settings on my 8125 so i can send and reiceve pic and vid txts. i have tried following almost every step ive read and cant get it working. ive called tmobile and they have sent all types of IP numbers andect. but i have know idea where to input them. every despription isnt how i see it on the phone. someone plz help.
dan wilson
Click to expand...
Click to collapse
i have the same problem please help!!
-Bart
Ok, i think im getting this, i also like everyone else here has a 8125 with T-Mobile. But i cant access the itnerent or send MMS.
So dose this mean i have to flash my cell phone with either the iMate or hte toehr MDA rom?
if i do will all hte wifi and all hte drivers work still like bluetooth and such?
t mobile settings
alright everyone, if you have the 5.99 tzones, 1. enter wap.voicestream.com in the apn info, 2. make sure you set the PROXY: 215.155.165.50 port 8080 for http and default ports for the rest, 3. make sure you change the default Internet connection to the one with the proxy under connections/advanced/select networks. and for email with the tzones you have to change the settings for your email to connect with the proxy connection or every time it checks email it'll disconnect and reconnect, and then you'll have to disconnect and reconnect to surf the web.
now for the full internet plan you dont need the proxy, the internet2 and 3 are for the blackberry plan and vpn plan if memory serves me correctly.
Nice thread!
Just used to configure a 8125 that I got of Craigslist yesterday, everything is working now on T-Mobile MMS SMS and internet.
Hi,
I just got my hands on a HTC herm100 (cingular 8525). I was able to superCID it and unlock it. Now I have my tmobile sim card in and it works great with one exception that I have been banging my head on. My MMS is not functional. I have made sure to change the network settings to show wap.voicestream.com with no UID and PWD. When I tap "connect" it goes out to the GPRS (as far as i can tell) and connects fine. When I send or receive a pic/vid message, I get an error saying "unable to send/receive your message". I have been through the MMS configuration a million times. Verified the gateway, port, and server address. I noticed on the herm100 there is no option to select the WAP version, on the MDA it gets set to WAP 2.0. I am on IPL-1.01 and SPL_1.40.olipro via the boot loader screen. Would some one please help me? I have a lot to learn since I am new to all of this.
Thanks for any help
Dunno how this is wherever you are, but in norway there's a seperate gprs connection for MMS..
you can select the wap version in messaging->options->MMS->servers->"servername".
Thanks for the reply. I updated to the latest ROM from HTC and it gave me the additional options I needed to get the MMS working. Thanks
I just sold my HTC HD to a friend, but the problem is that we cant get it to send/recieve MMS!
I live in Sweden and the operator is Tele2/comviq, we have tried all the suggested settings on the Tele2 site, but it just refuses to connect!
I have never used MMS function as long as I had the phone, so I dont know if it worked before, but it dosent work now!
Could someone please help us, and tell if there is something wrong with the phone or if it is just a setting that we are missing!
I have not installed any custom roms, it still has the original wm 6.1 rom!
Thanks!
I had the same problem with T-Mobile and the only way I could get it to work was to turn off proxy server in the connections settings.
Chrissssssss said:
I had the same problem with T-Mobile and the only way I could get it to work was to turn off proxy server in the connections settings.
Click to expand...
Click to collapse
Thanks for the tip, I checked the connection settings, but there are no proxy servers active!
Any more suggestions?
Thanks!
it's not touch hd spc if I were you i'd search the networking it forum for your operator as all wm device owners share the same settings
Same problem
I am having all problem with mms (sending and receiving) aswell.
I think the problem comes from our htc hds and 3g n gsm.
When I use my sim card on another phone, i can easily send and receive.
I wonder if those recent roms don't affect the mms thing.
I tried the original rom of my hd with orange and I can send and receive without problem.
I believe there is something wrong with our settings.
Hey All,
Got my Note 3 few days ago - I have noticed that when my phone is in 4G/LTE range it cant send or recieve MMS ( I can see there is an MMS incoming - but it just shows the download button , and doesnt download ). Everything else ( Calls , SMS , Internet etc ) works perfect.
As soon as I drop back to 3G - I will receive any outstanding MMS and I am able to send them again.
Im with Virgin Mobile Australia ( so Optus network ) .. Have tried all possible APN set ups , tried factory resets , tried with WiFi on and WiFi off - nothing seems to work :-/ - As a side note , once I actually put in a new APN I cant delete it if it doesnt work ??
Any more ideas? - Would like to get this sorted as I cant wait to root and get some custom ROMS on here - but am holding back in case I need the phone looked at by Samsung etc.