i have orange SPV M700 pocket pc mobile. i upgrated my mobile to windows 6.1. after that i upgrated my mobile to Windows mobile version 6.1 elegand edition but upgradtion, it stuck at bootloader mode. now i can not upgrate my rom. it stuck at windows mobile 6.1 logo. when i go to hard reset it come to bootloader mode shows " Trin 100
IPL -0.50
Trin 100
SPL-1.07.0000
this is the message i m getting from last two days. i tried to make every step to lad a rom but cant upgrade my mobile. plz help me to make my mobile alive.
there have been may posts similiar to your problem ...
generally speaking the answer seems to be to flash your Rom,
and then when it gets stuck again at bootloader, just check that 'usb' appears at bottom of bootloader screen
then just run the reflash again (without switching off, or unplugging phone)
this usually does work. even if it takes you 2/3 attempts
Related
Hello All
I have One SPV M3100 Here When power up it just Stays at Windows Mobile Screen cannot go further....Person says he tried to unlock at home using the Unlocked Radio (HTC HERMES RADIO FOR SIMLOCK V1.16.00.69)....
What to do now to repair it back ..???
Kindly reply Urgent help needed....
I tried to flash that unlocked radio again it stops at 39% all the time.....i tried 3 times but same.....
Not sure if it would work but have you tried a hard reset?
If that doesn't help see the Wiki it will tell you how to repair this type of brick. If it is in fact a brick
I have One SPV M3100 Here When power up it just Stays at Windows Mobile Screen .i dont know what i do?what is the hard reset.i dont know.how to do?i am new.
You should flash yr device wth official rom or send it back to the service center can you enter the bootloader 3color screen power+ok+reset? if yes is good you can flash yr device.
Hi,
I have a big problem, i when i started my SPV M650 (Orange phone) 2 days ago it didn't want to start (blocked on orange splash screen) so i made a hard reset and it was working.as i didn't want to keep orange OS i tried to flash it.
As a newbie, i tried to flash it with a HTC Rom without unlocking the CID. and..... didn't work !
Retry : updater says no system at all was installed on the phone then, it had passed by and installed the rom (don't know why)
yap, installed but didn't work! still blocked on splash screen sometimes go on WM6 welcome screen and one time accessed the Windows Mobile.
And one hour later.... black screen !
So, i tried to reflash it in bootloader mode with the original orange ROM, it worked, but still blocked on the orange splash screen and the OS version written on this screen was 1.84.0.0 (it should be 1.84.73.2) and screen was brightening so reflash a second time with that original rom, error 276: update error. Now everytime i start the phone, it is in bootloader mode with RUU written on it (in update process i suppose) and everytime i retry to update, error 276: update error. then tried with SD card: card no recognized and still blocked on the bootloader mode update process.
So,
- is there a way to update or flash the bootloader ?
- has my phone his hardware totally crashed
(because i think orange won't never accept warranty, even in normal way they only accept it when you are dying front of their door, and its not sure if they could kill you just for pleasure they'll do)
I up my shadow to 6.1 . The first time it went to 100% and restart with an error 270 : the image is corrupt . After, when I boot loader, it go to 2% and restart every time ( many)
When it restart, I can't enter the homescreen, it came to the green screen and hang.
Help me please. (
My shadow is frozen...! also
dear all experts ...
I have the same problem:
I'm stucked at bootloader mode and tried many roms but no one sucsess ... all of them reach 2% and then stopped.
even I tried the original one (Shadow_Software_Update_1.11.531.5.exe) from t-mobile official site but also same result.
so can any one help me and give me any solution to try?
have you guys both ran the CID unlocker?
dear t mobile shadow rom developpers,I've the same problems as the other,and I think that the phone should be cid unlocked via bootloader,as in my case,I've recently flashed my shadow with wm6.0 but their was an electricity faillure,and now it just hang on the splash screen,and when I use mtty and set 32,I saw that my device is cid locked but mine has no os for now,and I can do hard reset,enter bootloader,but I'm not able to flash any over os,as well as the original t mobile rom,so please,help us to revive our loved phone,please,I love this phone so much but I have not enough money to buy a new one
Few days ago my Wizard died all of a sudden. When turned on it only gets to the point when it shows "HTC smart mobility" and stays there. So not even to the screen with IPL, SPL. I tried soft/hard resetting, playing with battery but it was all no go, same.
I can get to the red-green-blue bootloader screen however, shows IPL 3.08, SPL 3.08. If i connect via USB cable to computer, bootloader screen shows "USB" on bottom. The ROM on the device was TNT's (not sure which version), Windows Mobile 6.1. It worked for ages without any problems with this ROM before this.
ActiveSync does not recognise Wizard at all, I cannot establish connection and therefore downgrade/upgrade the ROM becouse upgrade programs (for exmaple with ROM got originally with the device) say they cannot contact the device.
What are my options, please help.
hy
in my opinion , it is normal for active sync to not recognize your phone , because it's not turn on properly ,i mean it only recognize the phone when you enter windows mobile.
if i were you i would try to flash any rom i like and see if it works. i hope this helps
But ROM upgrade/downgrade program requires ActiveSync connection to run and I can't establish it...How to solve the situation, please advise?
when you are in bootloader screen and your phone is connected to the pc by usb cable just start the downgrade/upgrade program and it should work.
i did that. rom update utility complains that it cannot connect with mobile...
that was tried with:
1. official t-mobile ROM that was on the device when I got it
2. CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM
my IPL and SPL versions now are 3.08
sorry , i can't think of anything that might help you.
same problem
phones a brick.
I can get to the bootloader , i can even perform a succesful hard reset.
But it doesnt get recognized by the computer in bootloader mode. is there any way to flash the rom if the computer doesnt recognize the device?
regards
Try this look for nbd v8.1 or v8.3 .
hold the camera button and do a soft reset but keep holding the camera button until the 3 color screen comes up it should sync your phone then run the nbd rom or original cingular ship rom like this one ** RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1 ** i prefer original then other but that's me. Hope this help you.