Related
please help! I have made a wrong ROM Update for my Artemis. The result is that it doeasn`t starts anymore. I see only the start screen no more. If i make a SW or HW reset tahn i see a 3 colored screen and USB. But i don`t get a connection via usb to my compute`! How can i wake up my Artemis ???
tell use more what did you do and how did you do it?
what artemis is it?
what rom was it
Flash went sour..
You need the original ROM which was on your device when you bought it. What version (HTC, MDA, etc..) and what language was the original ROM?
please i need help too
I guess I made the same or a similar mistake that dr.moppi did. My machine is a Dopod P800 from mainland china with the chinese operating system. I flahsed it with PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap. Don't really remember what the original ROM was but now when i turn it on it freezes when it lights up. On the screen, it says
IPL 1.27.0001
SPL 1.27.0000
GSM 02.67.90
OS 1.28.0.0
DOPOD
I don't get a connection through usb to the computer either. I am not sure if I did the hard reset correctly. Didn't understand the instruction on that "press the soft key left and right and soft reset at the same time." Anyway, you guys are all experts, can you help me please?
it should be the same as my problem
if i remeber than i used the same ROM Update :-(
I hope anyone could give us a solution, please.
@dr. moppi we can only help you if we know what version you had before.
@empathyvirus you have to look for the original ROM which, in your case, should be the Chinese Dopod ROM. Install that one and your good to go.
Without the original ROM the only thing left to do is: sending your device to your provider or contact and sent it to the guys of imei-check. Either way, you'll probably have to pay to get it fixed.
how to install original rom
Thanks for your quick reply Pyth. In the case I get the original ROM from somewhere, how do I install it if I can't get a connection between the phone and my computer? Can you advice?
Put your device in bootloader by pressing the record button and reset at the same time. If you have your USB-cable connected between your PC and your phone it will indicate a connection by 'USB' in the left corner of your device. Now you should be able to run the ROM executable and update your device.
thanks anyway
i tried but it didn't seem to work. anyway, i have troubled you enough and maybe it's best i just go to the repair centre of dopod and pay for a fix. i really appreciate your help though Pyth.
Where can i find the t-mobile rom its the MDA Compact III that wont start for me
I have got hold of a T-Mobile Ameo that's gone wrong whilst upgrading/unlocking, I believe they were using the Olipro way (which I've successfully done fine myself in the past) and it's now stuck in the multi colour bootloader screen which displays:
ATHE100
IPL-v2.02
ATHE100
SPL-v1.10.RP00
And although it shows USB when plugging it in to a computer it won't connect to ActiveSync so I can't get to the stage where I can re-flash it.
I have tried the hard reset by holding down the volume and pressing the reset hole, and I get to the prompt:
Press ACTION to restore factory default
Press Camera Key to exit
I then press the little nipple button down and it displays:
Restore default complete
Press Power Key to boot
Press CommManager Key to format micro drive
I press the Power Key and I'm back in the multi colour boot loader back where I started, and I canot connect to ActiveSync to reflash.
Any help to turn this paper weight back into a useful device would be appreciated...
exactly the same problem here.
any guru with a solution ?
seckt0r said:
exactly the same problem here.
any guru with a solution ?
Click to expand...
Click to collapse
Hi seckt0r,
have you tried reflashing the original rom for your device while connected to your computer in bootloader? ftp://ftp.xda-developers.com/Athena/Shipped_Complete_Updates/
another idea would be to try sd card flashing,(see the wiki) but you would need to extract an image from the flash utility.
One thing to note is you couldn't flash any of the newer roms as you are probably not unlocked
lakeman,
Thanks for the tips and sorry for the late reply.
I did figured out how to make it work again, and played a lot with the device
Already delivered back to the 'client'...
Active Sync issue is solved !!!
Active Sync 4.5 had changed the way it connects from USB Serial Sync Mode to RNDIS Sync Mode. So it can cause problems in connecting with PPC. Try install on your PPC the "ActiveSyncMode.sa.CAB" that you can easily find on Google & run it. Hope this might help.
same problem here i tried to upgrade with orignal rom tmobile uk but its show invalid vensor what can i do plz help thnx
got your msg ahmerp but I don't use MSN
have you tried some of the other shipped roms
if that fils you could try cmone s mtty solution to rswrite the vendor id
seckt0r said:
lakeman,
Thanks for the tips and sorry for the late reply.
I did figured out how to make it work again, and played a lot with the device
Already delivered back to the 'client'...
Click to expand...
Click to collapse
Please help me to sort out my ameo problem some one flashed with with wrong rom now phone shows only volume icons and whenever i try to flash with tuk roms it always give me error invalid model id e.g
Check post 33 on this thread http://forum.xda-developers.com/showthread.php?t=387454&page=4. You MUST use Windows XP with SP2 optionaly SP3 for this to work. If you need mac file for SPL1.2 send me email.
ameo stuck on bootloader after trying to unlock with athena unlocker
my tmobile uk was on rom 1.12. i tried to unlock and it went faulty on step 1. now it boots only in bootloader mode tri colour screen.
any tmobile rom gives invalid vender id error 294.
anyone can provide me with the original 1.12 tmobile uk wm5 rom?? also anyone cna help me online to change vender id using rswrite or pdocwrite.
Ayyub
hafizayyub said:
my tmobile uk was on rom 1.12. i tried to unlock and it went faulty on step 1. now it boots only in bootloader mode tri colour screen.
any tmobile rom gives invalid vender id error 294.
anyone can provide me with the original 1.12 tmobile uk wm5 rom?? also anyone cna help me online to change vender id using rswrite or pdocwrite.
Ayyub
Click to expand...
Click to collapse
Can you post what is written on the bootloader screen?This will help define what rom you need to flash.
thanks lakeman
my bootloader tri color screen shows
I hv a new htc Athena (ameo t mobile uk locked).
I was trying Athena unlocker by olipro. I hv used this on a number of occasions and no problems.
With the present one it was on rom 1.12 tmobile uk and while doing Athena unlocker it crashed on first step.
In bootloader mode it shows
Athe100
Ipl-v1.00
Athe100
Spl-v1.10. RP00
It keeps giving invalid vendor id error 294 when I try to flash tmobile original rom
I have read olipro message who say that I can only repair this via pdocwrite. Apparently it’s the spl that’s corrupt so I need to repair this.
I will be very happy if u can help me with a step by step guide to repair the spl using pdocwrite or rswrite to change vender id.
I am using windows xp or windows 7 and I hv tried mtty and I can successfully connect to Athena and do info 2
It shows level=ff ie it is still locked cid.
Wdata also seems to work but even after password says pass I do not really know how to change the device id or vender id
Device id shows HTCS Þ?ÒtHTCE
I am told y olipro that this device id or spl can only be repaired via pdocwrite.
How can I do it..
Pls help me u can email me on [email protected] or hotmail.com and can add me so u can please provide me with a step by step guide repair my athena ameo
Ayyub
Hi,
if i connect my HTC Touch HD with my computer, it's just charging, nothing more. If i go to Bootloader, there is just written Serial even if its connected.
I am using Dutty ROM since some weeks and didn't had any problems till a few days ago, the strange thing is, that i didn't change anything.
I tried it on my laptop and on my computer the one with windows vista the other one with win xp, it worked on both, but not anymoe.
i also have a problem with the camera, if i press it nothing happens it just stays in the menu. Some days ago i got a error failed to initialize camera, but no more error anymore.
In my opinion my hardware is broken somehow, i hope someone in here can tell me sth different and a solution.
And if my hardware is broken, how can flash my original rom back without an usb connection, because the warenty will be gone with a custom rom i think.
I hope someone can help me.
Kryston said:
Hi,
if i connect my HTC Touch HD with my computer, it's just charging, nothing more. If i go to Bootloader, there is just written Serial even if its connected.
I am using Dutty ROM since some weeks and didn't had any problems till a few days ago, the strange thing is, that i didn't change anything.
I tried it on my laptop and on my computer the one with windows vista the other one with win xp, it worked on both, but not anymoe.
i also have a problem with the camera, if i press it nothing happens it just stays in the menu. Some days ago i got a error failed to initialize camera, but no more error anymore.
In my opinion my hardware is broken somehow, i hope someone in here can tell me sth different and a solution.
And if my hardware is broken, how can flash my original rom back without an usb connection, because the warenty will be gone with a custom rom i think.
I hope someone can help me.
Click to expand...
Click to collapse
A hard reset will quickly tell you if it's hardware or software and you don't need usb for that. There is also an option which dictates what the phone does when connected via usb, so you might want to check that option first.
need to read & search a little more
last paragraph of this post outlines how to return to stock rom
http://forum.xda-developers.com/showpost.php?p=2710548&postcount=1
i did hardreset, but still same problem
what i also noticed, is that sometimes my display don't work, i have sound and vibrate feedback, but i see just a black display, softreset etc doesen't work somehow i have to take of the battery.
i noticed also that the usb cable is a bit broken, but it still charges the phone.
but i already saw that normal usb cable should work too, so i tried it but no change.
i guess i will try to get the stock rom again now and see what happens
well like i thought, i can't get the stock rom, because i dont have a usb connection
any more suggestions?
Kryston said:
well like i thought, i can't get the stock rom, because i dont have a usb connection
any more suggestions?
Click to expand...
Click to collapse
There is 2 methods to flashing roms. Have you tried SD card method?
1. Download ROM image you would like to use, normally named RUU_Signed.nbh, and rename it to "BLACIMG.nbh"
2. Copy BLACIMG.NBH into the root dir of your Storage Card.
3. Be sure to have at least 30% of charge.
4. Turn off your device by using the Power Button
5. Go to bootloader mode. Push and hold Vol Down + press Power button.
6. As soon as presented the message, push Power button to start flashing or Volume Down button to cancel.
7. The whole procedure will take about 3 minutes. After you finish and see the relative message, soft reset your device, you are ready.
thanks god i didn't bring the phone to shop yet xD
thank u, i will check this method i will post here if it works later
well now i have another problem
there is written upgrade rom code error please try again on bootloader, i cant turn it on anymore it gets stuck on the loading screen of the flashing progress
Kryston said:
well now i have another problem
there is written upgrade rom code error please try again on bootloader, i cant turn it on anymore it gets stuck on the loading screen of the flashing progress
Click to expand...
Click to collapse
I had this exact same problem a while back after a bad flash. What you need to do is flash carriers orginal stock rom onto device. This will be the only rom which will work. Go to wiki section on stock roms here and download your original rom and flash it. Don't worry if bottom of bootloader is blank or doesn't say 'usb', original rom will flash anyhow.
More info read this thread
i am downloading right now, hopefully it will work, i will write more infos later
thank u for your help, without you, i would be lost...
i am stuck, i get error 206 connection
i downloaded stock rom to my pc
and i'm a bit confused, my pc noticed that i pluged in the phone, my device manager showed my phone, this worked only one time, now nothing...
EDIT: in bootloader mode, serial staus doesnt switch to usb or blank, updateing usb driver doesn't work without usb connection to device, at least i didnt found sth here
i will try it on my other computer now, but i doubt it will work
EDIT2: got usb connection for some seconds, problem is my hardware of device its broken somehow, if i press on th eback of the device i am able to get usb connection, now it failed, i will give it some more tries, there was sth 294 ID error
EDIT3: seems like its the wrong rom, how can i find out which rom will work?
EDIT4: semms like i got a working rom its at 10%
EDIT5: Device working again, usb working perfectly again, dunno why, but camera still doesnt work, there happens nothing if i press on it and display turns black sometimes as before.
i flashed an O2 Rom now, from my provider.
My last question now is, what about warranty, how can i know that uspl/hsapl is fully removed from device and how to find out if device is now a case of warrnty, where can i check it? because i want a working camera again, so i think i need the warranty
Some infos:
O2 Provider ROM flashed
On Bootloader i see:
BLAC100 32M
SPL-1.54.0000
MicroP-Blackstone (LED) v6
In my opinion its fine for warranty, but i want someone to confirm this.
And thank you alot for ur help and work in this forum =)
If you have an official HTC upgrade rom on your device you are fine for warranty. As your SPL says 1.54.0000 this means you haven't got USPL or HSPL on your device, so you're fine.
thank you very much
Hi,
I made a HSPL and it's succesfull cause i saw "we hacked it" on screen, than i download a rom from htc's site and install it successfully and than my device turned off.
I tried all of the button variations but unable to open my phone again. I tried the hard reset (volume down+on) and etc.
And still no sign of living
I tried another battery which is working and still a NO. I tried to charge it and no amber or green light appears.
But i find out when i connect the device to pc with usb, it gives me a sign of living that my 64 bit win 7 tries to install a driver called Qualcomm CDMA Tech. MSM driver. But unable to install it too.
Please tell me what to do cause i need to give this phone working to my cousin.
You downloaded a rom from HTC's site? Im no expert... but could you link to where you found this?
www . htc . com/tr/SupportViewNews.aspx?dl_id=878&news_id=534
Hi,
It's a Turkish rom upgrade, i wanted to change the WM to Turkish
Interesting.... but its Tmobile US HD2?
Yes it's a Tmobile US HD2
but the rom isn't tmous.and it won't have a .50. radio.
unlucky. theres a thread sticky at the top of the tmous section with a possible new brick fix. don't know ifit's this problem,but worth a look.
edit - ROM versiyonu: 1.66.468.1
couldn't find it actually i'm a newbie can u give me the address?
bookmark this
http://forum.xda-developers.com/forumdisplay.php?f=631
that's your tmous section the thread is top one or two posts in rom development section
I read that topic now but i couldn't understand how will i open the device to bootloader status cause i tried it million times and no sign of living from my leo
first i have to put the device on bootloader but this is my problem
yeai've just been reading it too. seems it's for a different problem.
your only hope then is take it back.
2 words: Search Function.
Seriously though, please use the forum's search function before posting yet another thread.
On topic, your bricked. The brick fix only works if you can actually get to the bootloader: which you can't do because you installed the wrong ROM. The only current solution is to send it back to T-Mobile and play dumb.
Sorry,
~Jasecloud4
htc hd2
i put a rom on my phone it looked like it was working whem i came back my phone was black so i thought it was off so i thought it will turn on so i tryed turning it on it dosent at all i also tryed hard resr hold up and down to manufacter reset and nothing it stays black but when i connect it to my computer it says its connected but nothing pops up please help im only 13 and my parents r going to scream the living hell out of me so work hard and help or even send me a free htc hd2 thanks
actually ur phone bricked.only the solution is jtag method to getting bootloader.better u have to give this expert tech in any service centre........
hello,I'm from china.and I get wp7 phone HTC 7 Surround.It's a phone for test.and I try to Switch USBMode to zune mode,it does't work..It only can work on Diag mode..so,someone can help me? The DIag mode Driver can’t find.It seems to unlock for developer？
look the picture...HELP...
understand me? sorry for my poor english
Now it does't connect to pc from zune
MY MSN:[email protected]
how did u enter USBMode ?
There is a program in phone, USBModeWitch, you can find it from my picture
Is this some sort of test device? As i noticed its also security unlocked
I have 2 devices，if you need.contact me. MSN:[email protected]
YES,it is unlock....
how did u get it to be security unlocked ?
He has a pre-release phone, it came with a custom firmware that has those tools pre-installed.
YuLong, have you tried rebooting the phone (remove the battery, etc)?
If that doesn't work, have you tried connecting it to a different computer with just the Zune software? It might work.
he shuld prob contact some Devs in this forum and get his ROM dumped or backed up somehow, it may be usefull for Jailbreaking or something....
Please post your device specific questions in the proper forums!
~~Tito~~
yulong256 said:
There is a program in phone, USBModeWitch, you can find it from my picture
Click to expand...
Click to collapse
that's a test rom, not a shipping ROM, so none of us will see that.
I need a htc surround rom desperately as i made the great mistake of purchasing a likely stolen store display model. its main account is set to [email protected] and keeps popping up with fake texts and refilling the contacts with fake contacts. my battery dies fast. Im sure im not the first to ask for a rom, but lord knows i need one.
need DIag mode Driver.Thanks