Related
Ugh! I bought a 4gb storage card. Every application I download, I save to this card yet. I'm down to 3MB of system storage memory. What can I do about this? I'm sick of clearing my storage once a month to be able to use this phone without the memory error popping up. Does anyone have any suggestions? Is there somethin I can do in my registry? I already have my emails and internet temporary files going to my storage card. What else can I do?
...........................................................................
1. Try another ROM-Are you still using the original rom it came with?
2. Make sure all you apps are closed - They usually just hide out open in the background.
3. Oxios Hibernate - I'm sure you can find a copy around here someplace. [Here ya go http://forum.xda-developers.com/showthread.php?t=374029]
4. Could be a memory leak. Certain programs have this effect on WM devices. {See 1.}
Also, remember that text messages take up room too. If you visit alot of websites, be sure to clear that also. I just cleared those 2 myself and I got like 5-6 MB free from just that.
clear temp storage even if it is on your card, it couldn't hurt. also delete keyboards that you installed unless you actually use them a lot because they take up a lot of room. move your ring tones to the SD card as they will still show up. update to the newest official ROM if you don't want to go to a custom, you'll get more memory with the new ROM but not much.
wyldstallyns2589 said:
...you'll get more memory with the new ROM but not much.
Click to expand...
Click to collapse
That is very untrue. I rarely run out of memory with Just2Clean.
how is that untrue? i'm on the new stock rom and there is more available memory for storage and program than the stock rom i was on previously.
wyldstallyns2589 said:
how is that untrue? i'm on the new stock rom and there is more available memory for storage and program than the stock rom i was on previously.
Click to expand...
Click to collapse
Sorry I misread your post but I thought you meant a new ROM in general not the Latest T-Mobile Update. Which is still way under performing compared to what the cooks generate here.
oh yeah, i had open tough 5.2 for like a day and it had so much more room after all my stuff was installed, it was insane, but it had some problems that i couldn't deal with so i went back to stock.
What sorta probs?
I found that most of/all the default apps on the Wing are total crap. I use very few applications. I just get my email, browse with opera mini, play solitaire, and listen to mp3's. Any more than that I expect the device to have issues to a degree. It only has a 201mhz processor it can't be expected to do much more.
it would scroll through lists randomly which was pretty annoying. you can't use jivetalk (now beejiveIM) on it. and there were issues with the original dialpad such as being damn ugly, fixed it with a skin but then it does it's scrolling thing when i'm trying to dial a number and then won't let me hit anymore numbers and i have to go out of the dialpad and go back in.
LesiRockGoddess said:
Ugh! I bought a 4gb storage card. Every application I download, I save to this card yet. I'm down to 3MB of system storage memory. What can I do about this? I'm sick of clearing my storage once a month to be able to use this phone without the memory error popping up. Does anyone have any suggestions? Is there somethin I can do in my registry? I already have my emails and internet temporary files going to my storage card. What else can I do?
Click to expand...
Click to collapse
slow down, take a breath....
what rom are you running ???
try installing the cab file for moving IE storage to Storage Card.
on your messages settings save all attatchments to storage card.
there is a solution but you have to let us know whats going on!!!!
robpet2, i happened to stumble on the cab link you have, 'plenty of cabs'. Is there a way to get a quick explaination of some of theme? or possible screen shots? thanks
wookalicious said:
robpet2, i happened to stumble on the cab link you have, 'plenty of cabs'. Is there a way to get a quick explaination of some of theme? or possible screen shots? thanks
Click to expand...
Click to collapse
haha... thats a good one.. cant do screenshots for all of them, just type in the name of the cab file in google with .cab at the end and do a search, they should all come up with descriptions.
I don't know what ROM I'm runnin. I don't even know what a ROM is. I look around these forums but no one explains, they just say use xyz cab. *shrugs* I'm totally lost
a rom is essentially the operating system that you use on your phone.
If you don't know what rom you're using, you're probably using the T-Mobile stock rom. We highly recommend flashing a custom rom from that POS.
To do that, you will need to use USPL or you will need to HardSPL your phone. Bear in mind that T-Mobile won't help you if they find a custom rom on your phone, but you can just flash back to the original before sending it in.
Read the USPL and HardSPL threads before taking any action
Thanx, Fzzym. You've given me somewhere to begin
LesiRockGoddess said:
Thanx, Fzzym. You've given me somewhere to begin
Click to expand...
Click to collapse
and on your storage memory issue...delete your old mail and text/picture messages then empty your email and text and mms deleted items. also google maps installs and stores its cache in storage memory even if you tell it to install on your card. those are the 2 biggest apps that eat away at my storage memory, although with the open touch 4 lite rom, i usually have 21mb free.
LesiRockGoddess said:
Ugh! I bought a 4gb storage card. Every application I download, I save to this card yet. I'm down to 3MB of system storage memory. What can I do about this? I'm sick of clearing my storage once a month to be able to use this phone without the memory error popping up. Does anyone have any suggestions? Is there somethin I can do in my registry? I already have my emails and internet temporary files going to my storage card. What else can I do?
Click to expand...
Click to collapse
It seems to me that you are experiencing the memory issues that every new T-Mobile Wing is faced with. It has to do with the default Page Pool size.
The easiest way around this problem is to do an upgrade of the new T-mobile software. You can find this at:
http://member.htc.com/RuuDownload/T-mobileUS/Filedownload.aspx?pid=wing
or you can change the pagepool size manually following the instructions at:
http://forum.xda-developers.com/showthread.php?t=313263
Good Luck
This sucks. Everything was going great but for someone reason lately, I am having trouble turning on my XV6800 from standby. Some times I have to hit the power button more then once. Or wait for a couple of seconds then it turns on. It is not dependent on the power button, because when I switched it to turn on when any button is on, it still won't turn on. What does get it out for good is if there is a call or a text that wakes its self up. But other times the power button works great.
I would love to solve this problem! I used SKTools to see what is running as soon as I hit the power button and hit it again to turn on. Both TimeWizard.exe and shell32.exe are at hundred for that second. Is that ok/normal? Have any suggestings before I hard reset?
If I do hard reset, I am wondering if instead of going to MR1 I should go with a WM6.5 rom. Is it really more trouble then its worth? I get about 21 of 22MB at startup (aftering clearing ram in beginning). What's the average for WM6.5 with the titan? I rather fix my problem and not hard reset, hate to reinstall all the software and do all the registry hacks all over again.
edit: Looks like this is an issue (a lot of people had it) that cannot be solved without hard reseting. So I still need to decide what route (MR1 or WM6.5) to go with...
I personally like 6.5. With the inclusion of a tool called nueKernel, many ROMs will boot with up to 28ish MB of RAM in high memory mode on a fresh install. In low memory mode, it's usually between 20 and 22. High memory mode, if you aren't aware, temporarily disables the camera. Low memory mode enables the camera. You can switch back and forth easily using a setting in your System menu.
Also, make note of any tools you currently use on your Today screen. Any third party additions may not exist for the new Titanium layout. There are a bunch of new add-ins for it that will most likely do everything that you need, but do some poking around first. You can also use the older today screen on 6.5 if you can't find what you need for Titanium, but that ruins a lot of the fun.
Since you use SKTools, you can also easily export any registry tweaks you put in, and re-import them on whichever ROM you decide to use. It's fairly easy.
There are a number of ROMs to choose from between XDA and ppcgeeks. Read some of the comments and check out what the chef includes. It will be pretty different than the official Verizon ROM you are used to, but that's usually a good thing. I currently use bbsandkm's 6.5 ROM from ppcgeeks, but that's personal preference. Ryan and TPLane here on XDA make some amazing ROMs that you can use, too.
But before you flash to any non-official ROM, please make sure you read up on the guides to do it properly. It's really pretty simple, but you need to just follow the directions.
Is the around 20MB the amount with Titanium? I love HTC Home since I can use the Today calendar. All these new plugins never show the complete day of apointments.
Yeah I would have to do some reading before I even consider. I do know I would have to downgrade to the original 6.0 OS before going custom. Would I have to go back to 6.0 again and then 6.1 if I decide I don't like 6.5? Already getting scared just thinking about it lol.
segadc said:
Is the around 20MB the amount with Titanium? I love HTC Home since I can use the Today calendar. All these new plugins never show the complete day of apointments.
Yeah I would have to do some reading before I even consider. I do know I would have to downgrade to the original 6.0 OS before going custom. Would I have to go back to 6.0 again and then 6.1 if I decide I don't like 6.5? Already getting scared just thinking about it lol.
Click to expand...
Click to collapse
In high memory mode after installing all my programs, I start with between 25 and 26 meg free. That is using Titanium.
The only reason (I think) that you'd need to downgrade to 6.0 is if your GPS does not work after your upgrade. And no, you wouldn't need to re-install 6.1 during the process.
Downgrade is necessary if you have a pri of 2.03xx and want gps to work on your custom rom.
I got so sick of this problem I just hard resetted and went for MR1. I will switch to WM6.5 maybe later in the future.
However, I notice my Titan did it again today! It barely has anything on it right now. So I am guessing my memory card might be the problem. So much stuff on it (its a 16GB) like portable apps, every cab I have ever downloaded etc. That's my only guess. Would a memory card be causing this problem?
segadc said:
I got so sick of this problem I just hard resetted and went for MR1. I will switch to WM6.5 maybe later in the future.
However, I notice my Titan did it again today! It barely has anything on it right now. So I am guessing my memory card might be the problem. So much stuff on it (its a 16GB) like portable apps, every cab I have ever downloaded etc. That's my only guess. Would a memory card be causing this problem?
Click to expand...
Click to collapse
What you are experiencing is a DSOD (dark screen of death). Usually its because of something installed to your storage card that is always running(not good, things like that need installed to device memory). Also make sure you have no .exe's in the 2577 folder on storage card (if you have the folder).
Here are some possible examples of DSOD's
Disable the automatic ActiveSync checking. This is the official solution from Verizon Data Technical Support.
Do not install software on the storage card that might trigger automatically. That means: Absolutely no today plug-ins, no ring tones, nothing that runs in the background, and nothing that could accidentally be triggered if you hit one of the buttons of your device.
Do not store data that might be accessed automatically. Same thing. Basically, do not store mail attachments on the storage card if you have wireless sync.
Close programs that use the storage card before turning your device off. Magic Button is an excellent tool to do this.
If you do install programs on the storage card, do NOT use the "Programs" window or the start menu to start them. Instead, use a File Explorer to run them. If you use "Programs" or the start menu, that program will be in your list of recently accessed applications in the start menu. So the next time you turn your device on and click on the start menu, the system will access your storage card to load the icon of the application - this will create a noticeable delay of several seconds, if not DSOD.
Don't randomly install crap. Every single piece of software you install could interfere with your system. Limit the software you install to what you really need. Check the forums, some people named a few programs that explicitly did not work for them.
I hope this helps you out.
Wow thanks, that helps a lot!
edit: Not my day. Don't ask me why but I decided to clean some registry after cleaning up my card. Well I deleted something that effects me to not see the verizon mobile site. I posted about it before here. At least now I know what I did wrong with that problem. Anyway, if I were to hard reset, will it revert back to a clean MR1 with all the Verizon stuff? So far I have been just reinstalling MR1 which does it all. The reason I ask is I hate to wait until tonight to do this again. Thanks guys.
RyanMogul6800 said:
What you are experiencing is a DSOD (dark screen of death). Usually its because of something installed to your storage card that is always running(not good, things like that need installed to device memory). Also make sure you have no .exe's in the 2577 folder on storage card (if you have the folder).
Here are some possible examples of DSOD's
Disable the automatic ActiveSync checking. This is the official solution from Verizon Data Technical Support.
Do not install software on the storage card that might trigger automatically. That means: Absolutely no today plug-ins, no ring tones, nothing that runs in the background, and nothing that could accidentally be triggered if you hit one of the buttons of your device.
Do not store data that might be accessed automatically. Same thing. Basically, do not store mail attachments on the storage card if you have wireless sync.
Close programs that use the storage card before turning your device off. Magic Button is an excellent tool to do this.
If you do install programs on the storage card, do NOT use the "Programs" window or the start menu to start them. Instead, use a File Explorer to run them. If you use "Programs" or the start menu, that program will be in your list of recently accessed applications in the start menu. So the next time you turn your device on and click on the start menu, the system will access your storage card to load the icon of the application - this will create a noticeable delay of several seconds, if not DSOD.
Don't randomly install crap. Every single piece of software you install could interfere with your system. Limit the software you install to what you really need. Check the forums, some people named a few programs that explicitly did not work for them.
I hope this helps you out.
Click to expand...
Click to collapse
Wow, you learn something new every day! Amazing writeup.
It happened again last night but I am thinking it might be caused by the latest SKTools. But not sure since I had it almost a month before this happened. I might go all day without it and see if that is the case. Then if it is the I will get the lower version.
Also, I am going crazy here, which registry edit is to take away the keyboard lag? I cannot remember if it had to do with increasing the gyphe or whatever maybe taking away the speed of the keyboard when it lights up. I just cannot remember. I looked at tons of posts here and PPcgeeks but still cannot find or figure out which one did it. Thanks guys. I need to seriously remember these registry hacks for next time.
ok: it was not SKtools. I put it back on. I decided to wipe my memory card clean and start over. So far so good! Now I will have time to find some registry edits.
If I go to terminal and type swap I get swapiness: 28 but in Swap the app I have it set to 60 and to use the swap partition that I created... but I have serious doubts as to weather or not it's using that. Everyone talks about how quick their roms are but every one I've tried is slow as heck. The phone will vibrate 4 times before the ring sounds and three times before I see who's calling..
if your using a Hero rom its better to have your ringtones on the phone and not on the SD card or else there is significant lag on them. I normally put my ringtones and notiffications on the Rom 1st then resign them.
as far as knowing if your swap is working I usually check with swapper app found in the market.
hope this helps
This thread is for those of you who have already got the MR2 update and would like to report any bugs, features etc. This thread will make it easier to follow up and find any similarities. Also to find fixes faster then digging through different threads.
Please DO NOT post "Oh I haven't gotten this patch yet","WTF it's not up yet","Installing it now" etc...
Please post anything you have noticed or would like to share about MR2 here.
I have the Swedish version of MR2, these are my observations.
(1) I noticed as well that when the device is waking up, the SD Card takes a second or 2 to show up. I am sure this has to do with power management. Now this causes a slight delay when you wake up the device and can be annoying if you are like me and want "Instant response". I stated already in another thread that I had applied the "SD Card Fix" that was created for MR1. Now there is no delay and thats the way I like it, the power consumption difference is not noticeable, so I am not concerned at all that it might use 0.0..something milliamps more power. Take note, that I did not suffer memory card missing or sudden data loss problems. It just took a while for the card to pop up after start up.
(2) The GPS problem with TomTom remains, I still need GPS Gate in order to use TomTom.
FIXED! See here -> http://forum.xda-developers.com/showpost.php?p=6494250&postcount=14
(3) The G Sensor problem remains, I cannot use any other apps apart from SE's that work with the G Sensor, very annoying!!!
This Java -> "Water Level" app works, so maybe some other ones might. But even that one is SE's. I will check more into it later.
(4) Visual LED notifications don't seem to turn on until you wake up the device, the audio alerts are instant though.
I will update as I find more, otherwise everything else(I have tested) on this device is faster now, including SMS typing via keyboard.
CAB for SD Card fix -> http://rapidshare.com/files/389695879/X2_SDFix.cab
EDIT:
Please note! I will no longer be working on trying to fix any bugs on the X2.
I'm sending it back and getting an X10 instead, so my efforts will shift over to Android now.
Perhaps down the road when they come up with a better OS or something, I will buy another X2. Until then, I hope others who have been helping out now will continue to do so.
Thanks for the clarification that the notification LED problem has still not been fixed. I'm afriad it might be time for me to say goodbye to my X2 as this was one of the reasons why I bought the device and if they still haven't fixed it now, it is unlikely they are ever going to.
bob2k4 said:
Thanks for the clarification that the notification LED problem has still not been fixed. I'm afriad it might be time for me to say goodbye to my X2 as this was one of the reasons why I bought the device and if they still haven't fixed it now, it is unlikely they are ever going to.
Click to expand...
Click to collapse
I am sure there are more updates or fixes on the way.
Besides that, not many devices offer LED notification anyways.
Today was the first day my X2 has run superbly, I have not needed to install "Advanced Config Tool" or "SK Tools". No Stalls, no sluggish behaviour. Good battery life... I think it's on it's way to perfection. Now we only need HardSPL
im also dissapointed that theyve not bothered to fix the LED notifications. was one of the main reasons i stuck with SE. most SE phones have LED notification (which work), an immensly useful but simple feature. it worked fine on the X1. seems to be another casualty of their over zealous power management. the phone doesnt wake up when a text is received like the X1 used to. im sure someone clever can get the X2 behave as it should do either, their must be something in the registry that can be modified like the SD card fix..
^^ Yep, I am sure we can tweak this bad boy somehow...
But meanwhile.
To enable "Auto rotation"
Edit the following Registry Key. YOU WILL NEED A REGISTRY EDITOR! If you don't know what it is, don't bother with this! Just move along...
HKLM\Services\MultiService\mods\Rotation\AccelBasedRotationEnabled
Change value to "1"
This will help with many things including this -> TomTom!
To enable TomTom Rotation, go further down to AADRClients
(1) Add "New Key" Call it TomTom or whatever.
(2) In that key add new "String Value"
(3) Value name "ModuleFileName"
Value Data "\Storage Card\Program\Navigator\TomTom Navigator.exe"
(You will need to check your folders are the same, edit the text accordingly)
(4) Make sure it saved.
(5) Reboot device
(6) Start TomTom when it's loaded rotate your device left, viola!
mtechfan said:
^^ Yep, I am sure we can tweak this bad boy somehow...
But meanwhile.
To enable "Auto rotation"
Edit the following Registry Key.
HKLM\Services\MultiService\mods\Rotation\AccelBasedRotationEnabled
Change value to "1"
This will help with many things including this -> TomTom!
To enable TomTom Rotation, go further down to AADRClients
(1) Add "New Key" Call it TomTom or whatever.
(2) In that key add new "String Value"
(3) Value name "ModuleFileName"
Value Data "\Storage Card\Program\Navigator\TomTom Navigator.exe"
(You will need to check your folders are the same, edit the text accordingly)
(4) Make sure it saved.
(5) Reboot device
(6) Start TomTom when it's loaded rotate your device left, viola!
Click to expand...
Click to collapse
Where do i fink HKLM ive been busting my braines to find it
oubsty said:
where do i fink hklm ive been busting my braines to find it
Click to expand...
Click to collapse
hklm = hkey_local_machine
after the install of MR2 all the data on my mammory card got corrupted. Not right away but couple of hours later. I have Generik_UK. Then i formated the card. installed the SDfix (its on this forum somewhere -> search) but i think its not everithing as it should be. the data did not get corrupred again but the micro SD sometimes is not visible in the file manager.
I also had some problems with total freezing of the phone (two times in 2 days time). that only happened when i was doing heavy usage on the camera and the picture viewing I guess the RAM got full ar something. then i deleted all the panells and the panelmanager to save some RAM. Ill let you know if it helps.
gbajzelj said:
after the install of MR2 all the data on my mammory card got corrupted. Not right away but couple of hours later. I have Generik_UK. Then i formated the card. installed the SDfix (its on this forum somewhere -> search) but i think its not everithing as it should be. the data did not get corrupred again but the micro SD sometimes is not visible in the file manager.
I also had some problems with total freezing of the phone (two times in 2 days time). that only happened when i was doing heavy usage on the camera and the picture viewing I guess the RAM got full ar something. then i deleted all the panells and the panelmanager to save some RAM. Ill let you know if it helps.
Click to expand...
Click to collapse
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Mine is still running really well, really really well. No memory card issues or sluggishness so far. I hope it stays that way.
oubsty said:
Where do i fink HKLM ive been busting my braines to find it
Click to expand...
Click to collapse
You also need to use a Registry Editor to do what mtechfan has recommended.
laurence0609 said:
You also need to use a Registry Editor to do what mtechfan has recommended.
Click to expand...
Click to collapse
Yep, I guess I should have mentioned that
instead of hardSPL to flash custom roms has anyone tried to hack the sony update program?? if it could be fooled into thinking the custom firmware is the latest firmware then get it to install it onto the phone...
For those of you not in the KNOW.
TomTom will work without installing GPSGate.
On the X2 – go to Settings/System/External GPS and change GDP9 TO COM8.
Run FASTGPS and download the latest Sat Data.
Open TomTom and change the GPS Device from Built in GPS receiver to Other NMEA GPS receiver and select COM8.
Wait a few secons for the Receiver to kick in and away you go.....
ok,can some one to test video mode,record some video and see what is the frame rate in new MR2,is it still low? or is it better then 15fps
gbajzelj said:
after the install of MR2 all the data on my mammory card got corrupted. Not right away but couple of hours later. I have Generik_UK. Then i formated the card. installed the SDfix (its on this forum somewhere -> search) but i think its not everithing as it should be. the data did not get corrupred again but the micro SD sometimes is not visible in the file manager.
I also had some problems with total freezing of the phone (two times in 2 days time). that only happened when i was doing heavy usage on the camera and the picture viewing I guess the RAM got full ar something. then i deleted all the panels and the panelmanager to save some RAM. Ill let you know if it helps.
Click to expand...
Click to collapse
I guess you look for Storage Card in File Explorer? What I have seen is that because of the card delay mentioned earlier the card appears at the bottom of the folders/files list and not among the folders in alphabetic order, at least on my device. Can be worth a look even though you applied the card fix and i haven't.
Two flaws:
1.
Auto lock on, display blacked out
Listening to music via slideview
Phone rings (technically speaking)
The phone vibrates and perhaps play half ringtone or just not at all.
Without the music listening the phone rings as it should, using generic ringtone so far so no storage card error here I suppose.
2.
Listening to music via slideview. Songs stored at Storage card.
Media player plays one, two, three songs and halts in the middle of a song.
Going to try a different media player to see what happens. I have not installed any yet because my favourite player, Pocket Player appears to have some compatibility issues with winmo 6.5. I know of the memcard fix and will eventually try that as well.
Was thinking of a new thread, quite the opposite of this. A "what programs works on X2 MR2". haven't installed that much yet, perhaps someone else can start
SE contact reading chinese?
Can anyone confirm if the SE contacts (not the WinMo) in MR2 can read Chinese (after installing either new fonts or localization)?
Thanks!
so i changed from GENERIC_SG to GENERIC_UK, rather time consuming but worth it IMO, but down to the nitty gritty details.
I'm still in the process of personalising it (adding my ring tones, loading old sms's etc) but from first few things i've done the speed between screens is quite phenominal
Also by accident i just found that you can move icons around ALOT easier, . BIG bonus as it doesn't mean i have to scroll all the way to the botom to find my new apps. - to do this just press down on the icon (using stylus or finger) and move it to were ever you want it.
more feedback to follow
I think this thread lost its and the thread starters intentions long ago. Its sad since it could have been a great resource. Some moderation would be apritiated.
Thanks, A.D
Hi guys, I just traded my HTC Wildfire for an HTC HD 2, it has Cyanogenmod 10 in it and my battery is just going down by the minute. In just 9 hours it is on 6% of the battery. Is there any way to save energy or something? And how do I turn off the animation on Cyanogenmod 10? I don't have the cyanogenmod tab under settings, so how do I do it?
9 to12 hours is normal. Just use your power control widget to shut off wifi, refresh, gps, when not in use. Keep screen brightness on auto.
Sent from my ZeJstersHD2 using xda app-developers app
Thank you, and is there any way to turn animation off? I've been searching everywhere, but no success.
aiimshock said:
Thank you, and is there any way to turn animation off? I've been searching everywhere, but no success.
Click to expand...
Click to collapse
You mean transition? Those are found under Settings -> developers options. Set them to 0 and animations are off.
Thank you so much! And one more question and I'm done: how do I expand my internal memory? I've heard of some programs but I couldn't find a detailed explanation about it.
aiimshock said:
Thank you so much! And one more question and I'm done: how do I expand my internal memory? I've heard of some programs but I couldn't find a detailed explanation about it.
Click to expand...
Click to collapse
Actually, there are many ways which confuse me as well (there are just too many and I'm too lazy to read about them).
But what I do know, is that if I wanted to have my sd-ext act as my internal memory I'd flash (DataOnExt) zip after flashing the rom.
There are also some apps that claim to give you additional storage by moving apps to sd, like Link2SD. (But personally, I never believed them nor used them).
You may have to do a search for yourself, you can use the link in my signature; it's an HD2 specific search, though you can google it, it is better to look in the HD2.
As Marvlesz said, Data2EXT and other similar flashable scripts should work perfectly well (provided you have an EXT partition on your SD of course). I've used Link2SD and it works fine, it actually creates a script which makes the system read your EXT partition as internal memory if I'm not mistaken. Either way, you're going to need a partitioned SD card.
Guys, i did all of that and it still has the icon on the notification bar that it is low on memory, doesn't want to install an app from Google Play, sometimes it doesn't even download it, I have no idea how to fix it, please help me.
aiimshock said:
Guys, i did all of that and it still has the icon on the notification bar that it is low on memory, doesn't want to install an app from Google Play, sometimes it doesn't even download it, I have no idea how to fix it, please help me.
Click to expand...
Click to collapse
Did you confirm that your internal memory has increased?
If yes, it is likely trying to tell you that your system partition is low on free space. Or, depending on the script used, you may still have your Dalvik cache in NAND where you may be short on space.
---
Be careful about reading health books, you may die of a misprint...
aiimshock said:
Guys, i did all of that and it still has the icon on the notification bar that it is low on memory, doesn't want to install an app from Google Play, sometimes it doesn't even download it, I have no idea how to fix it, please help me.
Click to expand...
Click to collapse
You're supposed to flash those scripts right after flashing the ROM, not after days of use. I don't think just when you get the "low on memory" thing, you flash a script and it works, no.
hey there,
sry for my bad enlish at the first.
-do off wi-fi
-display time out on 15 seconds
-display brightness not automatacly(?/ correct word ? ) reduce it on lowest level it is good for you
-when you doesnt data need do it off