Hi, I have 'problem' with my HP... I can't make it to connect via WiFi. So, I'm in a place where's WiFi signal very strong, but still, when I run Internet Explorer, phone starts GPRS, not WiFI. I have not found any options to select 'primary' connection? Where I can 'tell' him to connect via WiFi? Small problem but makes me angry!!!
Please, help
just turn on wifi first, then open the browser and your done.
Related
I have a belkin router. It works well with several laptops.
I can connect to it with my JASJAR and get an IP address.
If I sync pop3 email it uses WIFI and works as expected.
If I sync journal bar it uses WIFI and works as expected.
However if I try to use internet explorer it alway tries to start a GPRS session and refuses to work through WIFI. :evil: Why??
Ive sent hours trying every setting I can find.
Anyone have any suggestions? :?:
Jon
At least your Wifi network doesn't crash as soon as u connect the JJ. Mine doesn't even get that far...
Anyone who can help???
Hmmm I wonder if this is something in the Telstra settings Cab.
Re those having problems all on Telstra?
Might try a hard re set and then manually build the settings.
Jon
Try de activating the phone. this allows you to use IE via your wireless router.
Tried that, thanks.
I just get the "Cannot Connect" message and if I dismiss it. Nothing!
However I can sync the weather without getting the "Cannot Connect" box. SO the WiFi is working, its just that Explorer can see it.
Im running the O2 UK firmware and it works fine (auto gives prefernce to the WiFi if I am in range, try loading on the genuine Imate firmware.
Jon
I know how you feel. I can't get wifi to work. Heck, I can't even use IE when synced to the computer via USB :evil:
Have you tried messing with the settings in start/settings/connections/connections?
I finally got it working.
You have to chose the "Telstra Internet" setting in Network Managment.
Its in Settings, Connections, Advanced, Select Networks, select "Telstra Internet".
I then did, Settings, Connections, Manage existing connections, Modem, and set it to "Auto"
It uses the WiFi first and then only uses GPRS if there is no WiFi.
Hope this helps someone else !
Jon
Can anyone help me with just getting my JJ connected to the wifi network without crashing the router?
Have you tried turning off any encryption etc and re booting the router.
Then try to connect at the most basic level?
Now I'm totally confused
I don't know what is going on!
I have finally managed to use IE via Activesync, using "Telstra Internet" as my My network connects to...
I tried again to hook up to the wifi network. The router is connected to my desktop via a physical cable, and my tablet pC is connected wirelessly (my JJ syncs with the tablet). I turned to tablet off, and then connected the JJ to the desktop wirelessly. On the desktop, I am no longer able to connect to the internet, but for some reason, the JJ is able to connect to the internet :shock:
But, even if I disconnect the JJ from the network, my desktop is unable to connect back to the internet until I reboot the router. What does this all mean????
I have the same issue with my MDA Pro! i done even have the sutp option in the modem settings. I can connect to my belkin router with encryption but no response when in IE!
Anyone else got any other suggestions?
I'm beginning to think that nobody has a solution to such connection problems. Is there any hope on the horizon? Any chance of something being sorted out by MS?
BTW, how well does BT syncing/internet connection work?
Ok frustration rising.
I can connect to my Belkin wireless router with no problems but I can only log onto the router and not browse the internet!
I have checked that the proxy is not configured.
Anyone got any ideas?
Nope
I cannot for the life of me find any clear-cut instructions on how to setup the 8525 to use Wi-Fi for Internet instead of GPRS/3G if a Wi-Fi connection has been established. I've been able to connect to my Wi-Fi router but when I try to go to a website it still tries to connect to GPRS/Edge/3G! Help!
When I want to connect to wifi, I use connection manager to connect to wifi, then disconnect, and then reconnect, and for some reason this works.
Otherwise I get the same problem as you do.
Hope this works for you.
After tweaking my new Touch Pro and not getting PDAnet to work, I got wmwifirouter to work great, but now I cannot get out on the 3G network. I have tried IE, Opera, updateing weather and nothing works.
I am using KK rom and had no 3G issues before trying pdanet and wmwifirouter. I dont have Phone as Modem selected either.
Any ideas?
i had the same issue.
sorta.
when i turned on the wifi router, it over-rode the connection settings turning off my data connection. it also confused my usb connection. so every time i connected my device to my pc, it saw it as a network adapter.
all i did was turn off the router completely and restart my data connection manually.
after that, it reset all connections itself.
works fine now.
you may also have to manually disconnect your internet sharing proggie (open the program, select disconnect), as it uses that.
now that i think of it, try that first.
no wifi
after installing wmwifirouter i cannot connect to other wifi signals. The router works great, but when I turn off, my phone does not connect o other wifi signals.
How can i fix this?
So, I recently got a camera that connects to my phone via WiFi to use as viewer. When connected to the WiFi camera, I can't surf the internet. I figured when the phone didn't detect internet connection through the WiFi it would use the mobile/LTE connection for internet. This seems to not be the case. Does anybody know of a way to force using the mobile/LTE connection while the phone thinks it's connected to a WiFi network? Thanks in advance.
So, I recently got a camera that connects to my phone via WiFi to use as viewer. When connected to the WiFi camera, I can't surf the internet. I figured when the phone didn't detect internet connection through the WiFi it would use the mobile/LTE connection for internet. This seems to not be the case. Does anybody know of a way to force using the mobile/LTE connection while the phone thinks it's connected to a WiFi network? Thanks in advance.
Put the wireless camera on a network and get remote access to it or use download booster which should work as a back up internet
Thanks for the suggestion. I can’t put the cam on the network, it doesn’t have an interface. All settings need to be adjusted through the phone. It’s a Xiaomi MiSphere.
Download booster, on the other hand, is worth looking into. I took a hiatus from Android for a while, just got back into it with the GS8 so relearning things.
If I understand your question correctly, the phone connects directly to the camera via WiFi. So as far as the phone can tell, the camera is a router with no internet connection.
I have the same problem.. I need to connect to my car via WiFi without internet connection, but I want to stay online via mobile network. It has worked well on my previous OnePlus 3 with the stock rom, but SGS8+ doesn't support this feature. I have tried to turn on "Keep Mobile data turned on" option in "Developer options", but it isn't helpful. The Mobile Data is on while connected to the WiFi, but the Internet connection doesn't work via Mobile network. Google Chrome and all other apps say, I am offline without the Internet.
Any solution?
Any possible solution for this issue?