After tweaking my new Touch Pro and not getting PDAnet to work, I got wmwifirouter to work great, but now I cannot get out on the 3G network. I have tried IE, Opera, updateing weather and nothing works.
I am using KK rom and had no 3G issues before trying pdanet and wmwifirouter. I dont have Phone as Modem selected either.
Any ideas?
i had the same issue.
sorta.
when i turned on the wifi router, it over-rode the connection settings turning off my data connection. it also confused my usb connection. so every time i connected my device to my pc, it saw it as a network adapter.
all i did was turn off the router completely and restart my data connection manually.
after that, it reset all connections itself.
works fine now.
you may also have to manually disconnect your internet sharing proggie (open the program, select disconnect), as it uses that.
now that i think of it, try that first.
no wifi
after installing wmwifirouter i cannot connect to other wifi signals. The router works great, but when I turn off, my phone does not connect o other wifi signals.
How can i fix this?
Related
I have a belkin router. It works well with several laptops.
I can connect to it with my JASJAR and get an IP address.
If I sync pop3 email it uses WIFI and works as expected.
If I sync journal bar it uses WIFI and works as expected.
However if I try to use internet explorer it alway tries to start a GPRS session and refuses to work through WIFI. :evil: Why??
Ive sent hours trying every setting I can find.
Anyone have any suggestions? :?:
Jon
At least your Wifi network doesn't crash as soon as u connect the JJ. Mine doesn't even get that far...
Anyone who can help???
Hmmm I wonder if this is something in the Telstra settings Cab.
Re those having problems all on Telstra?
Might try a hard re set and then manually build the settings.
Jon
Try de activating the phone. this allows you to use IE via your wireless router.
Tried that, thanks.
I just get the "Cannot Connect" message and if I dismiss it. Nothing!
However I can sync the weather without getting the "Cannot Connect" box. SO the WiFi is working, its just that Explorer can see it.
Im running the O2 UK firmware and it works fine (auto gives prefernce to the WiFi if I am in range, try loading on the genuine Imate firmware.
Jon
I know how you feel. I can't get wifi to work. Heck, I can't even use IE when synced to the computer via USB :evil:
Have you tried messing with the settings in start/settings/connections/connections?
I finally got it working.
You have to chose the "Telstra Internet" setting in Network Managment.
Its in Settings, Connections, Advanced, Select Networks, select "Telstra Internet".
I then did, Settings, Connections, Manage existing connections, Modem, and set it to "Auto"
It uses the WiFi first and then only uses GPRS if there is no WiFi.
Hope this helps someone else !
Jon
Can anyone help me with just getting my JJ connected to the wifi network without crashing the router?
Have you tried turning off any encryption etc and re booting the router.
Then try to connect at the most basic level?
Now I'm totally confused
I don't know what is going on!
I have finally managed to use IE via Activesync, using "Telstra Internet" as my My network connects to...
I tried again to hook up to the wifi network. The router is connected to my desktop via a physical cable, and my tablet pC is connected wirelessly (my JJ syncs with the tablet). I turned to tablet off, and then connected the JJ to the desktop wirelessly. On the desktop, I am no longer able to connect to the internet, but for some reason, the JJ is able to connect to the internet :shock:
But, even if I disconnect the JJ from the network, my desktop is unable to connect back to the internet until I reboot the router. What does this all mean????
I have the same issue with my MDA Pro! i done even have the sutp option in the modem settings. I can connect to my belkin router with encryption but no response when in IE!
Anyone else got any other suggestions?
I'm beginning to think that nobody has a solution to such connection problems. Is there any hope on the horizon? Any chance of something being sorted out by MS?
BTW, how well does BT syncing/internet connection work?
Ok frustration rising.
I can connect to my Belkin wireless router with no problems but I can only log onto the router and not browse the internet!
I have checked that the proxy is not configured.
Anyone got any ideas?
Nope
I cannot for the life of me find any clear-cut instructions on how to setup the 8525 to use Wi-Fi for Internet instead of GPRS/3G if a Wi-Fi connection has been established. I've been able to connect to my Wi-Fi router but when I try to go to a website it still tries to connect to GPRS/Edge/3G! Help!
When I want to connect to wifi, I use connection manager to connect to wifi, then disconnect, and then reconnect, and for some reason this works.
Otherwise I get the same problem as you do.
Hope this works for you.
I have had intermittant problems with tethering my laptop via an 8525 since the release of the att2.15 rom. sometimes it would work correctly, sometimes intermittantly, sometimes not at all. After trying numerous combinations of proxies on and off, and various connection settings, I have finaly isolated what i believe to be the problem. When my wifi adaptor is turned on, IE on the laptop appears to prefer to connect to the internet via wifi instead of the usb connection to my hermes device. I do not have an internet connection on the wifi router/hub at my home. Is there a simple explanation for this that one of you network gurus could educate me with? Does anyone else experience this?
There is no broadband access at my residence (rural area) other than satellite or cellular. The wireless router is functioning only as a network for several computers and printers at my home. It is a hassle to lose my tethering connection every time i need to access wifi to print, or get data from another machine.
Any info would be appreciated.
I attached poll because i wondered how often people are using this functionality.
mthomas,
I just flashed up to the 2.15 ROM last night. Internet Sharing would never stay running on my laptop. I had my wireless card active on the laptop as well. It worked fine before I updated the ROM.
Edit:
I turned off my wifi card and still have the problem. After a few minutes of internet sharing, my laptop cannot recognize the the phone.
I have been using this phone with DCD's rom for a while now and I have never really used wifi. I decided I want to stream some things (like TV, music and movies) from my home computer to my phone while im at work but I have very crappy service at my work and when i disconnect the data service and connect my phone to wifi all my programs say they cannot access the internet. HOw can I set it up so that my software will use the wifi by default and then use data service if wifi is off or disconnected? I have gone through all the settings and im at wits end! THanks for any help!.
soooooo any ideas?
Maybe my phone is unique, but it seems to always default to WIFI when it is on and connected. You could check by turning on WIFI and then trying to access something locally (like the WIFI router settings).
thats the problem. when i connect to my wireless router (or any wireless router) non of my internet apps work. then when i disconnect and use data service they work fine. I guess ill try to install the newest dcd rom and see how it goes
Go into settings and ensure you set your wifi connection as "The Internet" and not "Work" as if you set it to "Work" the applications won't work as they want an internet connection.
I figured it out. for some reason or another i must have set it to use a static network ip and not the DHCP provided address. its working now.
Using Internet pass-through on my phone, connected to my PC, works fine. But after I've been using it and have disconnected, my phone seems to forget that it can connect to the GSM/3G networks for data, and any attempts to use data fail (with no icons to indicate a data connection). All settings under Wireless & Networks still show it to try to connect for data.
If I reboot the phone, it's fine.
steviewevie said:
Using Internet pass-through on my phone, connected to my PC, works fine. But after I've been using it and have disconnected, my phone seems to forget that it can connect to the GSM/3G networks for data, and any attempts to use data fail (with no icons to indicate a data connection). All settings under Wireless & Networks still show it to try to connect for data.
If I reboot the phone, it's fine.
Click to expand...
Click to collapse
I have a similar problem after using a widget to turn off wifi. after going to Menu > Settings > Wireless & Networks it attempt to and reconnects to the network.
steviewevie said:
Using Internet pass-through on my phone, connected to my PC, works fine. But after I've been using it and have disconnected, my phone seems to forget that it can connect to the GSM/3G networks for data, and any attempts to use data fail (with no icons to indicate a data connection). All settings under Wireless & Networks still show it to try to connect for data.
If I reboot the phone, it's fine.
Click to expand...
Click to collapse
I have the same problem. Anyone has a solution?
I can't seem to make the internet pass through thing work in the first place.
At first win7 kept telling me that drivers were not installed. Later on, after having downloaded and installed everything I could find, it seemed to recognize the phone, but the desire still couldn't connect :|
Yes, I have this problem too. I use the Internet pass-through very often because on our college is wi-fi prohibited. Phone restart helps but I must do this every morning. Similar problem is while disconnecting from wi-fi (out of signal range). Sometimes happens that GSM/WCDMA are not going up.
Hi,
Some possible answers to this issue here:
Data connection Lost after Internet Pass-through connection...
Des. . .