Red LED lits continuously. No other signs of life. Tested battery from my device with onother Wizard and all works good (battery is full). Tryed soft and hard reset, nothing.
Is there any other solution than buy a new device.
Thank you
Is it any new message and missing call on it?or check the battery charging function ,is it working ?
If all good,maybe upgrade is the way.
dushuai said:
Is it any new message and missing call on it?or check the battery charging function ,is it working ?
If all good,maybe upgrade is the way.
Click to expand...
Click to collapse
Blank screen...Battery is ok
Kaiser
Hi, I've the same problem on my Kaiser. Yesterday evening I put it charging and this morning phone is dead, only red LED while phone is on the charger.
Related
I am tryin to turn on my mda but it does not. i lest it on charge for almost 2 days and it still dosent turn on . i tried the soft reset and hard reset but still no help. i press the power switch but nothing happens. While the mda is on charge it does show me the red light lit on the led . Any help appreciated
I had a similar problem with my MDA; except the red light on the MDA wouldn't light up during charging. T-Mobile initially send me a new MDA; but it turned out to be a bad battery ... the MDA will not operate without a fucntional battery, even when connected to a charger. They sent me a new batter and my MDA was working again. For some reason my battery must have shorted out.
Hi!
I have a magician who did'nt function because the led (the led in the up part, them which is blue, green...and red ) remain led...
in my opinion because it don't function!
Is possible to baypass it?
Sorry for my bad english!
Upp
do you understand the problem?
Tks!
It is possible to by-pass the LED but that will not solve your problem. The LED turns red when the main battery is totally discharged eventually discharging the backup battery. It also stays red if the unit is plugged to the charger without the main battery installed.
Hi!
yes i know...
but the battery is charged and installed!
All function good, because i tried to use a tester!
I don't know the stat of the backup battery...
Is possible to test it?
In my opinion the problem is them on the first post...
There's a very small toggle switch on the lower-right hand side when the device is facing down. This switch is usually toggled on when the battery cover is inserted. Most probably, either the tab which triggers the toggle switch or the switch itselft is broken.
Did you try and unlock your phone before this happened???
HI everybody, first i am from germany so excuse my english
i have a Herm 300 that belongs to a friend of mine, he just bricked his phone during a flash procedure.
It shows the same as in point 4 described here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
so i did that MTTY thing and after the reboot on the screen appears something like:
+
if u want to rest all date press QWERTY (R) for YES
and QWERTY (dunno that letteranymore) for no
so i pressed R for YEs and softresetted with stylus.
Now i cannot turn that device on, no led lids up nothing!
so i put the battery out an plugged in the chgarger cable
et voilá a red led lits up on the right corner.
i cannot turn the device on and when i put the battery back, the red led tunrs off.
Is here someone who can help me?
thanks!
Linus02
If you can get your hands on another battery then try that as the led lights up meaning that the hardware is still working. Battery could be bung...
Cheers...
but with a charger cable plugged in, it mustbe possible to start up the device or?
When i turn out battery from my 'HTc Touch and plug in charger, i can start the device but not the herm?
greets
Linus02
You can't start the Hermes without a good battery installed....
I ahve a major problem.
Today my battery went down, so I had to charge it.
I left it to charge when I returned the led was red, which means battery is low right? So I noticed it wasnt charging. I retried and was red again.
So I took the battery out and try to to start the phone with the charger attached. But it woudnt start.
The led was green and bliking yellow.
It wont even charge from the pc...................
What do I have to do? What could be wrong?
Thanx in advance
It's possible to turn charging off in the power settings... not sure what to suggest
john09 said:
It's possible to turn charging off in the power settings... not sure what to suggest
Click to expand...
Click to collapse
Itsw working again. Battery seemed dead. I left it charging for one day.
it shouldn't do that, even if you charge it for that long. HP automatically stops charging when full.
Probably the mini usb port is broken. You should have it checked.
Turkiye
Hello.
I have big problem with my Uni. It's not booting, it's not going to bootloader mode. When I connect Uni to computer the red LED blinks and nothing happen. Battery works in other uni.
hmm leave the uni on the charger with battery in.
also have you tried using another battery in the dead uni?
same problem
I have the same problem during upgrading to wm6.5 computer gave me an error message
i pressed the reset button and the unit went blank
now its dead whatever i do notthing happens bootloader keys , hardrest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
please help
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
holy **** me too. i borked my sd slot so i took it apart, just popped off the back and fiddled with the sdpins and now it refuses to boot+redlight.
any thoughts? i miss my phone -_-
Hi
I noticed if i connect the device with my pc the red light flushes time to time and the pc gives the error of usb device not recognized please help I miss my o2 exec.
many thanks
keyfetcher said:
Hi
I noticed if i connect the device with my pc the red light flushes time to time and the pc gives the error of usb device not recognized please help I miss my o2 exec.
many thanks
Click to expand...
Click to collapse
did you try another battery in your uni? also did you try tapeing the pin on the battery that reads the voltage level?
according to the universal service manaul flowchart, a redlight indicated bad battery>bad battery pins>shot motherboard.
so i don't think this is good. anyone got any..thoughts on figuring out WHAT exactly happened?
Hi
thanks for the input
will you please guide how I can tape the pin on the battery that reads the voltage level
many thanks
help
I have upgraded my xda exec from wm5 to wm6.1 but later decided to upgrade by downloading this upgrade from xda developer site " BA_6.5.23004.WWE-xplode-R7.1"
during upgrading it reached to 75% and then my pc gave me an error message
unfortunately i continued and later on a gray screen appeared on the xda exec
i pressed the reset button and the unit went blank
now its dead whatever i do nothing happens bootloader keys , hard rest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
I asked my friend to check the power in battery and he said its charged
I dont know what is wrong ?
please help
keyfetcher said:
I have upgraded my xda exec from wm5 to wm6.1 but later decided to upgrade by downloading this upgrade from xda developer site " BA_6.5.23004.WWE-xplode-R7.1"
during upgrading it reached to 75% and then my pc gave me an error message
unfortunately i continued and later on a gray screen appeared on the xda exec
i pressed the reset button and the unit went blank
now its dead whatever i do nothing happens bootloader keys , hard rest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
I asked my friend to check the power in battery and he said its charged
I dont know what is wrong ?
please help
Click to expand...
Click to collapse
I beleive that BA_6.5.23004.WWE-xplode-R7.1 mean blue angel rom. http://forum.xda-developers.com/archive/index.php/t-482997.html
so you are pretty much out of luck unless you can jtag.
again the same problem
keyfetcher said:
I have the same problem during upgrading to wm6.5 computer gave me an error message
i pressed the reset button and the unit went blank
now its dead whatever i do notthing happens bootloader keys , hardrest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
please help
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
Click to expand...
Click to collapse
...almost the same.
my problem occurred after I did a soft reset. It took it a while to boot and every other time I used soft reset the boot took longer and longer until it did not want to turn on again.
Soft reset doesn't work but when it's left on the charger and pressed, the battery light blinks once. It won't charge and my PC registers a device malfunction when connected through USB.
The only sign of life pops up when I press hard reset but after I press 0 or X nothing happens.
Please help!
I have same problem as well, I even bought spare battery but uni remains dead and silent.
Beside the fact that when it's connected to PC, windows show unrecognized usb device.
what happened before it died? did you ... do anything to it? mines still dead as a doornail.
I am not alone :'(
It means many other fellows are suffering from same.
strange , total silence from experienced guys... atleast they can say it is useless for you to try.. and now dig a grave for it.
Experienced guys have their own lives too
Wait with patience till someone replies you and do not double post on same topic please