HI everybody, first i am from germany so excuse my english
i have a Herm 300 that belongs to a friend of mine, he just bricked his phone during a flash procedure.
It shows the same as in point 4 described here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
so i did that MTTY thing and after the reboot on the screen appears something like:
+
if u want to rest all date press QWERTY (R) for YES
and QWERTY (dunno that letteranymore) for no
so i pressed R for YEs and softresetted with stylus.
Now i cannot turn that device on, no led lids up nothing!
so i put the battery out an plugged in the chgarger cable
et voilá a red led lits up on the right corner.
i cannot turn the device on and when i put the battery back, the red led tunrs off.
Is here someone who can help me?
thanks!
Linus02
If you can get your hands on another battery then try that as the led lights up meaning that the hardware is still working. Battery could be bung...
Cheers...
but with a charger cable plugged in, it mustbe possible to start up the device or?
When i turn out battery from my 'HTc Touch and plug in charger, i can start the device but not the herm?
greets
Linus02
You can't start the Hermes without a good battery installed....
Related
this is my firends phone - tmobile cmpact 2 - its never been cooked, standard wm5 rom and no upgrades or downloads. it suddenyl today entered bootload screen - we took out the battery restarted, then it loads to the tmobile splash screen the cuts off, now it wont even turn on
tried charging it, and the charge light doesnt ocm eon, any ideas??
Thanks
anyone?..........................................
You have to enter bootloader mode (look up the wiki for how to) and then run the official rom upgrade for charmer.
my charmer is also dead
right in the middle of typing in an adress at iGO on my Charmer with WM5 it started rebooting and turned black after the T-Mobile bootscreen. And I could only turn it on by removing the battery, waiting for some minutes and then turning on again, just to see the same thing happening - black after T-Mobile screen.
Now I cannot turn it on at all, cannot reset (neither hard nor soft), cannot get into bootloader nor can I charge it (at least no LED is indicating anything).
Does anybody have an idea? vlodeck?
At the moment I am not at home, so I cann't try the original power supply (so far I used the one in the car).
Thanks in advance!
There are two possible outcomes Jared.
Either your power supply in the car is not enough to lift up Charmer.
Or your battery went totally dead, in which case you would have to buy a new battery.
Good luck.
Thanks for the fast support!
the strange thing is, that it all started with battery at about 80%...
I will check on sunday with the original power supply and a battery from another device. Then I will let you know the outcome.
I can lend you my battery, Jared!
...to see if it is really the battery.
Otherwise I can only recommend the HTC Kaiser ;-)
problem solved for now
thanks frikibaby for the offer...
but vlodeck was right. At home I pluged in the charger and it started charging and I can also turn it on again. So for some reason my car charger does not charge the charmer anymore although the indicator and the battery bar says so ...???
Thanks for the support!!
Hello, i get Qtek from friend which is not working, i want to repair it.
It doesnt turn on, when i push power button, on the all screen appears like white strings and thats all. I have tried soft and hard reset , but nothing to do. The only good thing i see- that when i plug in the charger, red LED turns on.
So where do i could find the problem?
Is that normal- when i put battery into its placce, there immediately red LED turns on? (dont push any of buttons)
the red light means that the battery is dead or no charging...leave it a few hours to charge like so without tryn to turn phone on....also make sure that the red connector which secures the battery in place is functional because there is a switch on the mainboard trigerred by that connector and when it's not locked the phone won't start..
mihai_nightrideer_86 said:
the red light means that the battery is dead or no charging...leave it a few hours to charge like so without tryn to turn phone on....also make sure that the red connector which secures the battery in place is functional because there is a switch on the mainboard trigerred by that connector and when it's not locked the phone won't start..
Click to expand...
Click to collapse
Dear user, does there appears any sign (led changes color or else) when the battery is fully charged?
orange led => battery charging
green led => full charge
red led => battery very low (stay in this until your xda turn on)
Thank you, abdelamine
Red LED lits continuously. No other signs of life. Tested battery from my device with onother Wizard and all works good (battery is full). Tryed soft and hard reset, nothing.
Is there any other solution than buy a new device.
Thank you
Is it any new message and missing call on it?or check the battery charging function ,is it working ?
If all good,maybe upgrade is the way.
dushuai said:
Is it any new message and missing call on it?or check the battery charging function ,is it working ?
If all good,maybe upgrade is the way.
Click to expand...
Click to collapse
Blank screen...Battery is ok
Kaiser
Hi, I've the same problem on my Kaiser. Yesterday evening I put it charging and this morning phone is dead, only red LED while phone is on the charger.
Hello.
I have big problem with my Uni. It's not booting, it's not going to bootloader mode. When I connect Uni to computer the red LED blinks and nothing happen. Battery works in other uni.
hmm leave the uni on the charger with battery in.
also have you tried using another battery in the dead uni?
same problem
I have the same problem during upgrading to wm6.5 computer gave me an error message
i pressed the reset button and the unit went blank
now its dead whatever i do notthing happens bootloader keys , hardrest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
please help
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
holy **** me too. i borked my sd slot so i took it apart, just popped off the back and fiddled with the sdpins and now it refuses to boot+redlight.
any thoughts? i miss my phone -_-
Hi
I noticed if i connect the device with my pc the red light flushes time to time and the pc gives the error of usb device not recognized please help I miss my o2 exec.
many thanks
keyfetcher said:
Hi
I noticed if i connect the device with my pc the red light flushes time to time and the pc gives the error of usb device not recognized please help I miss my o2 exec.
many thanks
Click to expand...
Click to collapse
did you try another battery in your uni? also did you try tapeing the pin on the battery that reads the voltage level?
according to the universal service manaul flowchart, a redlight indicated bad battery>bad battery pins>shot motherboard.
so i don't think this is good. anyone got any..thoughts on figuring out WHAT exactly happened?
Hi
thanks for the input
will you please guide how I can tape the pin on the battery that reads the voltage level
many thanks
help
I have upgraded my xda exec from wm5 to wm6.1 but later decided to upgrade by downloading this upgrade from xda developer site " BA_6.5.23004.WWE-xplode-R7.1"
during upgrading it reached to 75% and then my pc gave me an error message
unfortunately i continued and later on a gray screen appeared on the xda exec
i pressed the reset button and the unit went blank
now its dead whatever i do nothing happens bootloader keys , hard rest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
I asked my friend to check the power in battery and he said its charged
I dont know what is wrong ?
please help
keyfetcher said:
I have upgraded my xda exec from wm5 to wm6.1 but later decided to upgrade by downloading this upgrade from xda developer site " BA_6.5.23004.WWE-xplode-R7.1"
during upgrading it reached to 75% and then my pc gave me an error message
unfortunately i continued and later on a gray screen appeared on the xda exec
i pressed the reset button and the unit went blank
now its dead whatever i do nothing happens bootloader keys , hard rest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
I asked my friend to check the power in battery and he said its charged
I dont know what is wrong ?
please help
Click to expand...
Click to collapse
I beleive that BA_6.5.23004.WWE-xplode-R7.1 mean blue angel rom. http://forum.xda-developers.com/archive/index.php/t-482997.html
so you are pretty much out of luck unless you can jtag.
again the same problem
keyfetcher said:
I have the same problem during upgrading to wm6.5 computer gave me an error message
i pressed the reset button and the unit went blank
now its dead whatever i do notthing happens bootloader keys , hardrest keys , reset buttons nothing happens
if i connect to the wall charger to the unit nothing happens
if i press reset button red light blink once and if i remove the battery and connect the pda with the charger red light remains on
please help
I connected the unit with charger for whole night hoping it will work but nothing happened even the battery is cold ?
Click to expand...
Click to collapse
...almost the same.
my problem occurred after I did a soft reset. It took it a while to boot and every other time I used soft reset the boot took longer and longer until it did not want to turn on again.
Soft reset doesn't work but when it's left on the charger and pressed, the battery light blinks once. It won't charge and my PC registers a device malfunction when connected through USB.
The only sign of life pops up when I press hard reset but after I press 0 or X nothing happens.
Please help!
I have same problem as well, I even bought spare battery but uni remains dead and silent.
Beside the fact that when it's connected to PC, windows show unrecognized usb device.
what happened before it died? did you ... do anything to it? mines still dead as a doornail.
I am not alone :'(
It means many other fellows are suffering from same.
strange , total silence from experienced guys... atleast they can say it is useless for you to try.. and now dig a grave for it.
Experienced guys have their own lives too
Wait with patience till someone replies you and do not double post on same topic please
hello, got an hd2 which stay on "first screen": on the screen appear only "htc" and down r, s and d (radio 2.15).after few seconds the screen goes coloured and that's all. strange thing, i can go to bootloader but when try to put the usb cable the screen goes black and that's it. can my phone be repaired?
even when i put the usb charger (phone is closed) the led didn't light, but the battery goes warm.
thx
klinutzu said:
hello, got an hd2 which stay on "first screen": on the screen appear only "htc" and down r, s and d (radio 2.15).after few seconds the screen goes coloured and that's all. strange thing, i can go to bootloader but when try to put the usb cable the screen goes black and that's it. can my phone be repaired?
even when i put the usb charger (phone is closed) the led didn't light, but the battery goes warm.
thx
Click to expand...
Click to collapse
I am not a prof. but can you give some more info maybe others or I can help you.
Look also here for nand lot of usefull important info here http://forum.xda-developers.com/showthread.php?t=1336700
For the Sd look here also
http://forum.xda-developers.com/showthread.php?t=1401767 :silly:
Have you tried a different battery?
Have you tried cooling the device?
If the bootloader is intact just get an another
battery and flash a WM 6.5 rom via a SD card.
Please keep us posted....all the best.