Hey guys I have a problem with my rhodiom. I flashed from a german stock rom to an english rom and now the hardware keyboard makes an "y" and not an "z" and I also dont have the letters "ä,ü,ö".
Is there a cab available to change the hardware keyboard to german???
Use a registry editor to change the key:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME\KeyboardLayouFiles]
"07FF"="eT9.Rhodium.wwe.kmap.txt"
to
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME\KeyboardLayouFiles]
"07FF"="eT9.Rhodium.0407.kmap.txt"
Then the hardware keyboard should work with all the symbols, but in the software keyboard the "z" and "y" keys will still be changed.
Thanks for your quick help! Software keyboard is not so important for me. I am using the Fingerkeyboard 2.1 for it and it works in all languages!
RobbyTouchHD said:
Thanks for your quick help! Software keyboard is not so important for me. I am using the Fingerkeyboard 2.1 for it and it works in all languages!
Click to expand...
Click to collapse
Okay, that's fine then
If in the hardware keyboard the "y" and "z" are still messed, then try setting the registry key
Code:
HKLM\HARDWARE\DEVICEMAP\KEYBD\
"CurLang"="407" (HEX)
In case some one want to change soft AND hardwarelayout:
To change software layout (advaced Config required)
1. start
2. Advanced Config
3. change to the right layout under Input
To change hardwarelayout special key's
1. open a registry editor
2. browse to [HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\IME\Keyboard LayouFiles]
3. change "07FF"="eT9.Rhodium.wwe.kmap.txt" to "07FF"="eT9.Rhodium.807.kmap.txt" (standard country code) files are already in windows folder
To change qwerty to qwertz
1. install Keys remapper ( here)
2. Start -> Settings -> System ->Keyboard Config
3. Menu -> add key -> press y -> Action -> Emulate key press -> z -> ok
4. Menu -> add key -> press z -> Action -> Emulate key press -> y -> ok
5. update config
German Keyboard Layout
Hi,
my first work... I tried to create a CABfile for that, and I think it works.
Please find attached here.
Hallo zusammen,
ich habe mal versucht ein CAB-File zu erstellen.
Es ändert die 3 benötigten Registry-Werte und kopiert 2 benötigte Dateien ins Windowsverzeichnis.
Umlaute usw sind auch auf dem Hardware-Keyboard damit richtig... nicht nur y und z...
Perfekt ist es natürlich diese Datei auf die Speicherkarte in das Verzeichnis xda_uc zu kopieren.
Z.B. beim Energy-ROM wird dann alles dort selbst installiert nach nem hardreset oder Flashen von nem neuen Rom.
Habe keinen Hardreset gemacht um das zu testen. Habe die Werte von Hand zurückgestellt und dann das CAB probiert, bei mir hats geklappt...
Kann aber ein Profi gerne überarbeiten... Ich bin wirklich nur Laie und hatte mal vor vielleicht 5 Jahren die letzte CAB-Datei erstellt...
Mike
works!!
Yes, thank you, finally something that worked on my TP2
Same problem here...
Can someone make a cab file for Norwegian keybord...
Letters i want to use are Æ=æ, Ø=ø and Å=å...
Is there a cab available to change the hardware keyboard to Norwegian???
Related
Please teach me how to clear item(s) in NEW Menu....
i've uninstalled the program, but the shortcut entry in NEW MENU still exist...and it's kind of annoying... :shock:
Please help me...
Take the attached prog which will make a softreset and delete the items in the new menu.
regards
cimber
@cimber: You'd read what he asked for...
@efayes: Search your registry and you'll know... can't tell you the key off-hand.
if you mean by New Menu the one that appears in the left lower corner of today screen then you'll have to go to
Start>Settings>Menu>New Menu then choose what shortcuts you like to see in it
cheers
brother, i've tried to go to SETTINGS>MENU>NEW MENU...the key is there....
but i've uninstalled the programmre...i can set it off so that i can see in the NEW MENU...but it does exist in the settings....i just dun like it...
Please help me to clear it off...
Chatty said:
@cimber: You'd read what he asked for...
Click to expand...
Click to collapse
Kann schon sein, aber das Problem ist das ich eine nur deutsche SW habe und wie was übersetzt wurde etwas "merkwürdig" ist in der deutschen Version. Daher also meine Antwort.
Gruß
cimber
PS: ein Beispiel, bei der Kameraeinstellung gibts den Begriff "Geschrei". Gemeint ist, und das ist eine Vermutung "hue" oder "tint". Also was isses ?
Hallo Zusammen,
ich habe folgendes Problem. Ich habe mir gestern das B&B 4.1 ROM aufgespielt. Läuft alles auch wunderbar bis auf meine O2 WAP FLAT.
Habe alle Proxy eingestellt sowie auch in der Reg AllowLSP sowie UAProf laut den Anleitungen in diversen Foren geändert. NICHTS tut sich.
Mit dem alten Rom von O2 lief alles problemlos. Ich kann aber per USB Verbindung mit dem Handy surfen nur nicht über GPRS… dann kommt der Fehler:
0x80072f78
Zugangspunkt wap.viaginterkom.de
Proxy: 195.182.114.52
Was kann ich noch machen?
i cant help you but i can transalte to english so others might find a solution:
(ich kann dir nicht helfen, aber ich kann dein post nach englisch übersetzen)
he wrote:
i have following problem: yesterday, i flashed B&B 4.1 ROM to my device. everything is working great except for my O2 WAP FLAT.
i set all proxies and also set AllowLSP and UAProf in registry according to manuals i found in various forums. NOTHING happens.
with the old O2 ROM everything worked without problems. I can access the internet using a USB connection but not via GPRS...if i try i get this error: 0x80072f78
access point wap.viaginterkom.de
proxy: 195.182.114.52
what else can i do?
Thx...
But nothing work's.....
DAMM IT
soardiac said:
i cant help you but i can transalte to english so others might find a solution:
(ich kann dir nicht helfen, aber ich kann dein post nach englisch übersetzen)
he wrote:
i have following problem: yesterday, i flashed B&B 4.1 ROM to my device. everything is working great except for my O2 WAP FLAT.
i set all proxies and also set AllowLSP and UAProf in registry according to manuals i found in various forums. NOTHING happens.
with the old O2 ROM everything worked without problems. I can access the internet using a USB connection but not via GPRS...if i try i get this error: 0x80072f78
access point wap.viaginterkom.de
proxy: 195.182.114.52
what else can i do?
Click to expand...
Click to collapse
1. Open Internet Explorer.
2. On the Tools menu, click Internet Options.
3. Click the Connections tab, and then click LAN Settings.
4. In the Local Area Network (LAN) Settings dialog box, click to select the Automatically detect settings check box, and then click OK.
5. Quit Internet Explorer.
6. Click Start, click Run, type cmd, and then click OK.
7. Type the following commands. Press ENTER after each command.
a. proxycfg -d
b. net stop wuauserv
c. net start wuauserv
d. exit
hi i have MDA Compact IV phone ( from t-mobile ) and have a few questions ( im new so pls dont post im in wrong section or something. i rly need answers )
So i instaled succewsfulyl the jevelry 0.2 theme but my clock are not so big as in the pictures. I have just ordinary small black clock on the "today" screen. And my next problem is that under the start button is the grey strip continuing to a under battery indicator space, where is "T-Mobile" written. And same grey is behind the "contacts" and "programs" buttons on the "today" screen. How can i turn this to gold?
And the other question is have this phone "wake up alarm"? Or i just must set the "reminder" to wake me up?
Thank you very much for answers
moin aus deinem englisch und der tatsache das du ein mda hast
entnehm ich mal das du deutsch bisty
kannst du mirdas problemv nochmal erklären? die sache mit dem wecker ist recht einfach suchhier im forom mal nqch klaxon
is der beste wecker den es fürsmda/diamond gibt
Hallo Leute, der Einfachheit halber schreib ich jetzt mal nicht in Englisch...
Ok ich hab ein X10i mit firmware R1FA014.
Soweit so gut, bis Punkt 5 der allgemein bekannten Schritten zum debranden läuft alles super aber dann:
1. Download files:
-SE PC Companion
2. Install PC Companion on your PC
3. Connect your phone when PC Companion asks
4. Check for updates - on this screen you will get the REPAIR option
5. Select repair - and let PC Companion guide you through it.
BIS HIER HER KEIN PROBLEM, ES SIND ABER KEINE FILES VON DER GRÖßE 110 oder 16 MB in dem Ordner!!!!
Maximal was mit 10 MB zu finden.
ICH HAB ECHT ÜBERALL GESUCHT; ABER AUCH IN ANDEREN ORDNERN IST NICHTS ZU FINDEN...
IST DAS EIN BEKANNTES PROBLEM?
WIE KANN ICH DAS X10i DENNOCH DEBRANDEN?
VIELLEICHT IST DER ORDNERVERLAUF JA AUCH ANDERS?
ICH VERWENDE VISTA und XP, aktuell hab ich hier gesucht und nichts gefunden:
C:\Programme\Sony Ericsson\Update Service\db\13740270\blob_fs
6. Go to the following directory (folder may be hidden)
For Windows Vista/7 C:/ProgramData/Sony Ericsson/SEMC OMSI Module/db/13740270/blob_fs) (Yes, ProgramData; not Program Files!)
For XP C:/Documents and Settings/All Users/Application Data/Sony Ericsson/SEMC OMSI Module/db/13740270/blob_fs
7. Sort the files by date in descending order
8. Look at the screenshot: http://img217.imageshack.us/img217/5554/x10deb.jpg
"Purple"]Dazu komme ich daher gar nicht mehr
9. Rename file 1 from the archive to the first file at the top (they should both be similar size (~110mb)
10. Rename file 2 from the archive to the second file at the top (they should both be similar size (~16mb)
11. Now copy both files from the archive into C:/ProgramData/Sony Ericsson/SEMC OMSI Module/db/13740270/blob_fs. If asked to overwrite, then do so.
12. Run PC Companion again. Go through steps 4 and 5.
13. After a successful update the phone will be unbranded.
(If you used Generic NCB files it is recommended to perform steps 4 and 5 once more. This will update the firmware to the newest, R1FB001, firmware.)
6. Go to the following directory (folder may be hidden)
For Windows Vista/7 C:/ProgramData/Sony Ericsson/SEMC OMSI Module/db/13740270/blob_fs) (Yes, ProgramData; not Program Files!)
For XP C:/Documents and Settings/All Users/Application Data/Sony Ericsson/SEMC OMSI Module/db/13740270/blob_fs
7. Sort the files by date in descending order
Bitte helft mir
1st of all, if you do not post in English always provide a translation
are you referring to the "Debranding X10" in general section? then you should have asked there instead of opening a new thread
drop a note, if the answer is yes I will transfer your post
Ich denke wenn man es sich so einfach machen will wird man keine Antwort bekommen ...
Ich will mal nicht so sein. Das einfachste Tool zum flashen (auch debranden) ist OMNIUS. Einfach mal googeln oder hier im Forum danach suchen. 2xGratis Account anlegen, bestätigen und in Omnius die Zugangsdaten eintragen.
R1...zip oben und die phone.zip darunter auswählen.
Firmware von hier nehmen:
http://forum.xda-developers.com/showthread.php?t=683793
Aber die Richtige (X10i - Shipped R1FA014 !!)
Danach könnte man sogar auf die R1FB001 updaten (optional)
@Moderator: Sorry that i not wrote back in english
in this particular case I can live with that
thx for answering his q
until I get an answer from OP...
Mod. edit: not dev related, moved to general
first of all thx for help...
Sorry, I didn´t know that I´m not allowed to write in german...
I was searching for a while but the only thing I found was the describtion which I put at the top.
@yalla
Could you please tell if it worked for you the way IxXxI told you ?
Did you do the step to R1FB001 also ? If yes How ? (Omnius, Seus)
I read in different forums that people bricked their X10 after flashing debranded firmware so I'm a bit curious. Mine is also R1FA014 and A1 branded.
THX
dont work
ok,
I have create an account and installed omnius.
Then settings-> server-setting-> I have put in the pass login.
After I was trying to "unlock" the phone I also was trying to "flash" the x10.
Nothing...
I get always the message "incorrect password"
please dont think that I´m to stupid to put in the right!!
I was trying to log in by using the webside, works...
Was trying to change the pass, works on webside, only on webside...
I was creating a different acc. works, put the same massege.
I think for me this way to debrand does not work
any idea
Newbie Need help,
I activated "turn all notifications off (exept alarm clock) - till deactivation" and now, i cant find a way to turn it on?
In the quick menu there is the button for this (attached file), but it will not be able, to push it.
Hilfe, ich habe mein "Telefon lautlos geschalten - bis zur Deaktivierung". Wie schalte ich die Töne wieder ein, bzw. was meint man "Bis zur Aktivierung"?
Ich finde keinen Button, der mir intuitiv zeigt, alles wieder einzuschalten...
Gruß Feusti
Ok, i got it, its a bug. In an other forum i read this:
Pawan Pratap Singh hat gesagt:
Hi all, same problem on Nexus 5
Fix:
I took the volume down to vibrate and then one more down to total silence. When I brought it up again, the priority was gone