Please teach me how to clear item(s) in NEW Menu....
i've uninstalled the program, but the shortcut entry in NEW MENU still exist...and it's kind of annoying... :shock:
Please help me...
Take the attached prog which will make a softreset and delete the items in the new menu.
regards
cimber
@cimber: You'd read what he asked for...
@efayes: Search your registry and you'll know... can't tell you the key off-hand.
if you mean by New Menu the one that appears in the left lower corner of today screen then you'll have to go to
Start>Settings>Menu>New Menu then choose what shortcuts you like to see in it
cheers
brother, i've tried to go to SETTINGS>MENU>NEW MENU...the key is there....
but i've uninstalled the programmre...i can set it off so that i can see in the NEW MENU...but it does exist in the settings....i just dun like it...
Please help me to clear it off...
Chatty said:
@cimber: You'd read what he asked for...
Click to expand...
Click to collapse
Kann schon sein, aber das Problem ist das ich eine nur deutsche SW habe und wie was übersetzt wurde etwas "merkwürdig" ist in der deutschen Version. Daher also meine Antwort.
Gruß
cimber
PS: ein Beispiel, bei der Kameraeinstellung gibts den Begriff "Geschrei". Gemeint ist, und das ist eine Vermutung "hue" oder "tint". Also was isses ?
Hi everybody,
i habv a probelm, i have upgraded my new Prohet, and now it is dead.
I have te logo.screen, then i become this information on the screen:
IPL 2.15.0001
SPL 2.15.001
GSM 2.47.21
OS 2.15.3.22
after 20-30 sec i become e blank (white screen) thats all ;-)
USB connection i can not establis.
teraterm with USB rerout its nbot possible ???
i have do the hardreset (camera button - reset botton, then release, i become the same resultat as descripted before.
The Prohet i think is dead? or any ideas whart i can do ?
PS. Sorry about my bad bad english, i can describe in italian or german.
many thanks for any help or suggestions.
regards
try to flash another rom. you will get the bootloader by pressing the camera button and do a softreset at the same time.
Und auf Deutsch:
noch ist nicht zu spät!
Du kannst den Bootloader erreichen indem du die Kamertaste drückst und zeitgleich einen Softreset durchführst - Der Prophet sollte jetzt den dreifarbigen Bildschirm zeigen, dann einfach das Updatetool am PC starten und es sollte wieder funktionieren.
Same Issue here, Need Help
Recently flashed my phone prophet G3 stuck at the same page as yours, the solution used to be in PDAmobiz but the page has since been altered doesn'tgive the steps on getting to the 3 color page (bootloader). Anuone please help.
Now hello people, I simply opens sometimes nen new subject, because I really in despair am. So I begin at the beginning sometimes. I wanted to me how I have already written in the other Tread, the m amine 2.0 flashen. If this has also acted like in the instructions described. So HrdSPL has folded everything. Only when I wanted then Rome Flashen, nothing has happened and I had my normal O2 Rome on it again. Then ahbe I the shaking it tries out where I had then the problem which I had no more receipt what I wanted to repair by another radio Rome. If everything has used, however, nothing. Now I have downloaded to me \ " 3LIT3 \ " IV Rome. everything is also quite good so far, only everything is there, unfortunately, on in English and I have Tom Tom 7 where my old maps do not go any more. When I now tried ahe, over again the m amine 2.0 to flashen, came he to 100% and then went out. . it came fehlermeldung image \ " corruptet \ " is and on the orbit 2 then the boat screen with the SPL 2.20 and on the right odebn RUUNBH. wars came.... Now I know really nciht more what I should do .... everything an O2 Rome tries to flaschen also miss. I hope somebody can help me here as fast as possible. Thank you schonmal in prerau. Now Olli Having tries sometimes the M.Amine Lite to flaschen, however, WWE. There everything claps funny enough
Hi 'oliver12685'
Nice Post ! But the problem is can not understand one bit of it .. though you tried hard ..
Hy,
sorry for my BAD english! it´s not so good.
can i write this in German??
oliver12685 said:
Hy, can i write this in German??
Click to expand...
Click to collapse
Well, I don't know German, probably you can write in German and try to give an English translation, and hope for any German friends on the forum to help.
Hi, I´m from Germany, but I don't understand your problem in English
German:
Hi, Ich bin Deutsch, aber kann dein Problem leider nicht auf Englisch verstehen. Schreib es bitte auf Deutsch und Englisch.
Ok I Try it in english
ok, now on my Handy I have the "3LIT3_VI_Full" Rom from this Forum.
The Problem is, its now in english.
I would the M.Amine 2.0 Rom in German, But its dosn´t work.
when i flash the Hard SPL its all fine. But when I Flash the M.Amine Rom it get to 100 % and than there comes an Error.
After a Restart comes the Reboot Screen . in the right corner is "RUUNBH" .
Why it dosn´t work?? Hard SPL 2.20 is flased.
So, I hope you understand me now
You needn't to re-Hard-SPL. When it's flashes once time, you needn't to do it a second time.
Have you tried it by another ROM? Is there the same problem?
German:
Du musst Hard-SPL nicht flashen, wenn du es schon einmal gemacht hast, des seit denn du hast den originalen Bootloader wieder geflasht.
Hast du es schon einmal mit einem anderen ROM versucht? Also kein M-Amine oder 3LIT3? Tritt da dasselbe Problem auf?
mutant92 said:
You needn't to re-Hard-SPL. When it's flashes once time, you needn't to do it a second time.
Have you tried it by another ROM? Is there the same problem?
German:
Du musst Hard-SPL nicht flashen, wenn du es schon einmal gemacht hast, des seit denn du hast den originalen Bootloader wieder geflasht.
Hast du es schon einmal mit einem anderen ROM versucht? Also kein M-Amine oder 3LIT3? Tritt da dasselbe Problem auf?
Click to expand...
Click to collapse
Das ist ja das Koriose, ich habe das Light M-Amine Rom WWE geflasht und da ging alles einwandfrei. und vorher hatte ich Bepe´s Rom. Da hatte ich das Problem, das ich so gut wie keinen empfang mehr hatte.
I have tryed the M-Amine Lite WWE Rom and its worked fine. But the Full Rom doesn´t work
Hast du Skype ?
English:
Do you have Skype?
Hi,
How are your flashing? And what is the error at 100%. Check the corresponding error code in the readme.doc from OEM. If you are flashing using SD card, better run from Win-XP (preferably). Do a Hard Reset, connect to ActiveSync and run the RUU at 'align screen'. Good Luck . !
mutant92 said:
Hast du Skype ?
Click to expand...
Click to collapse
Ja ich habe skype.
Could I get your Skype-Name (PM?!) please to help you?
German:
Kannst du mir bitte deinen Skype-Namen geben, damit ich dir besser helfen kann?
mutant92 said:
Could I get your Skype-Name (PM?!) please to help you?
Click to expand...
Click to collapse
At last there a German hand holding another. Enjoy ..
I think it's your Radio-Version that make problems. To solve the problem flash this
sorry for my poor english!!!
i have the same problem.
i have download an original rom : RUU_Polaris_HTC_WWE_1.25.405.1_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
on xda
and install it.
after i sucessfull intall the amine in french...
It can be your Radio! Please look at the Link given in this Thread, there you can download the Radio and your problem should be solved
Good Luck!
Hi,
I'm trying to use "basebandswitcher" an App for switching bands for the Defy.
I have some errors that I couldn't find solution for anywhere, but a post on a german forum that seems to solve it.
Problem is google translate, and other online translators, do a pretty bad job translating it.
Anyhow I hope some nice German member could help with translating this small quote:
Habe ich gestern bei meinem Handy auch gesehen das diese Meldung auftaucht.
- Wenn Du dem auf Default zurücksetzt nimmt er das von Einsteino vorgegebene Band wieder aktiv (meine 2.21). Bekommst aber beim nächsten mal die selbe Meldung. Aber das zurücksetzen auf DEFAULT geht damit.
- Wenn Du ein anderes Band auswählst und bei dem beschriebenen Fehlerfensterchen "later" anklickst, wird Deine Wahl übernommen.
An sich, finde ich, ein Schönheitsfehler. Das zurücksetzen auf Default geht, die Wahl eines anderen Bandes auch. Nur eben mit kleinem Fenster.
Click to expand...
Click to collapse
Thanks!
shloms said:
Hi,
I'm trying to use "basebandswitcher" an App for switching bands for the Defy.
I have some errors that I couldn't find solution for anywhere, but a post on a german forum that seems to solve it.
Problem is google translate, and other online translators, do a pretty bad job translating it.
Anyhow I hope some nice German member could help with translating this small quote:
Thanks!
Click to expand...
Click to collapse
"I had the same message on my phone yesterday
-if you go back to default it will take the band given by Einsteino. But you will get the same message next time but going back to default works
-if you take a diffrent band and klick "later" in the errorwindow it works"
Thank you very much, loehry
Human translations beats Google
Newbie Need help,
I activated "turn all notifications off (exept alarm clock) - till deactivation" and now, i cant find a way to turn it on?
In the quick menu there is the button for this (attached file), but it will not be able, to push it.
Hilfe, ich habe mein "Telefon lautlos geschalten - bis zur Deaktivierung". Wie schalte ich die Töne wieder ein, bzw. was meint man "Bis zur Aktivierung"?
Ich finde keinen Button, der mir intuitiv zeigt, alles wieder einzuschalten...
Gruß Feusti
Ok, i got it, its a bug. In an other forum i read this:
Pawan Pratap Singh hat gesagt:
Hi all, same problem on Nexus 5
Fix:
I took the volume down to vibrate and then one more down to total silence. When I brought it up again, the priority was gone