Hi everybody,
i habv a probelm, i have upgraded my new Prohet, and now it is dead.
I have te logo.screen, then i become this information on the screen:
IPL 2.15.0001
SPL 2.15.001
GSM 2.47.21
OS 2.15.3.22
after 20-30 sec i become e blank (white screen) thats all ;-)
USB connection i can not establis.
teraterm with USB rerout its nbot possible ???
i have do the hardreset (camera button - reset botton, then release, i become the same resultat as descripted before.
The Prohet i think is dead? or any ideas whart i can do ?
PS. Sorry about my bad bad english, i can describe in italian or german.
many thanks for any help or suggestions.
regards
try to flash another rom. you will get the bootloader by pressing the camera button and do a softreset at the same time.
Und auf Deutsch:
noch ist nicht zu spät!
Du kannst den Bootloader erreichen indem du die Kamertaste drückst und zeitgleich einen Softreset durchführst - Der Prophet sollte jetzt den dreifarbigen Bildschirm zeigen, dann einfach das Updatetool am PC starten und es sollte wieder funktionieren.
Same Issue here, Need Help
Recently flashed my phone prophet G3 stuck at the same page as yours, the solution used to be in PDAmobiz but the page has since been altered doesn'tgive the steps on getting to the 3 color page (bootloader). Anuone please help.
Related
Hallo,
ich suche mich langsam verrückt und finde keine Möglichkeit meinen MDA Vario 2 von T-Mobile A upzudaten.
ich habe hier die Vers.
HERM 300
IPL 1.01
SPL 1.4
und schaffe es nicht mittels PC und SD Karte upzudaten
beim PC bekomme ich den Fehler 260 und von der 2GB in FAT32 SD-Karte mag er mir des umbenannte File auch nicht starten - es erschein nur der Tricolor-Screen und Serial-Meldung - wenn ich es mit dem PC verbinde erscheint dann USB aber er gibt mir kein Menü zum Installieren.
kann mir hier jemand bitte helfen
danke
Bani
Sorry, I have to write it in english
I am searching a possibility to update my MDA Vario 2 von T-Mobile A.
I have here
HERM 300
IPL 1.01
SPL 1.4
I could not update my MDA vari 2 from T-Mobile A
from PC I get error 260 and from the 2GB in FAT32 SD-Card I also couldn´t start the renamed file- it appeares only the Tricolor-Screen and Serial-Meldung - and when I connect to the PC USB but I got no menu for installation
could someone help me please
thanks
Bani
Bani_777 said:
Sorry, I have to write it in english
I am searching a possibility to update my MDA Vario 2 von T-Mobile A.
I have here
HERM 300
IPL 1.01
SPL 1.4
I could not update my MDA vari 2 from T-Mobile A
from PC I get error 260 and from the 2GB in FAT32 SD-Card I also couldn´t start the renamed file- it appeares only the Tricolor-Screen and Serial-Meldung - and when I connect to the PC USB but I got no menu for installation
could someone help me please
thanks
Bani
Click to expand...
Click to collapse
What file are you using?
look HERE for help.
thanks for your help
I tried the radio on this site:
http://www.t-mobile.at/privat/servi.../Software/MDA_Vario_Pro_Compact_II/index.html
(for T-Mobile it is only allowed to use this one, isn´t it?)
I think it is Version 1.27
Well, a lot of things could cause the 260 error. Check out the MrVanx guides. It could be Vista, it could be your version of ActiveSync...
You actually can use non-TMobile ROMs. You just need to use the latest CustomRUU. Find any post from olipro and there is a link in his signature to take you to the right place to download it. Or, a WM6 ROM download will probably be packaged with a working RUU (updater) that will work with a non-TMobile ROM.
Thanks to Olipro and the other developers here, there are not many limits to what you can do!
Hello,
can you help me please?
the charmer don't boot. It hangs at the bootscreen. at usb mode activesync dosent find the phone.
it shows.
ipl 2.06
spl 2.06.0000
gms 02.19.21
os 4.0.0.0
i want to flash the original firmware. how can i do?
greetings markus
Same problem pls an answer
Enter the bootloader mode and run official rom upgrade.
Bootloader Menu...
I can't make an update with the original firmware software. This Programm tolled me i must make a AktiveSync connetion. In Bootloader (CAM POWER Button) My computer find any USB device but activesync doesn't make a sync connection. Thats my problem. What can i do?
Greetings, Markus
Active sync wont make a connection when your in bootloader mode. The update program will work, it doesnt need active sync connection.
can you give me a link to the update?
I found it self. im so lucky because it do. sorry for my english. @ datenzwerg http://downloads.t-mobile.de/redire...ku3.3_38222_382117_026921_tmo_de_ger_ship.zip damit sollte es funktionieren auch wenn er eine sync verbindung haben will die brauch er aber nicht ein fach ins bootmenu und da dann usb an stecken und am computer starten ;-) bei mir hats geklappt
hoffe h mal das es funzt...
ich werde es probieren mehr als kaputt kann es eh net werden. hab halt a bisserl CID Panik da ich eine TMOBILE Austria sperre habe.
werde berichten wie es gegangen ist.
mfg markus
wrong ventor id
the german update doesn't run. the programm tells me wrong ventor id. i will dry the austrian one.
http://www.t-mobile.at/privat/servi...ftware/_files/MDA_compactII_AKU2_0_Update.exe
greetings, markus
Solved the Problem
Hello,
i've solved the problem.
The German 3.3 Version can't be install by ventor check.
The Austria 2.0 Version can't be install by Active Sync check.
I used the ROM form The Austrian Update and the Software from the
German update Pack.
My Charmer have a useable ROM!!!
Greetings Markus
aaaaaaaaaaaaaaaaaaaaaaaaaaaa
irgendwie klappt dat bei mir nich so recht
könnt ihr mir genau beschreiben was ich zu machen hab
ich hab das selbe problem mda2 Tmobile nach einem flash versuch geht es aus dem boot nicht raus usw
gibt es kein affengriff oder sowat damit er von alleine hoch bootet
thx
mfg
srox
dank an shayd
ua ich habs dank an shayd
Originally Posted by shayd
1. dowenload this t-mobile official rom
2. enter your Charmer into bootloader mode by pressing power + camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the Charmer to your pc (make sure your battery is fully charged)
4. run the t-mobile rom.
5. good luck!
Hallo!
I had the same problem with the vendor Id and i tried to flash the austrian t-mob version ! It worked but at about 40% it saied error and now the bootloader goes on and within 5 sec it wents of! SO i cannot try to flash another time!
What can i do?
hi i have MDA Compact IV phone ( from t-mobile ) and have a few questions ( im new so pls dont post im in wrong section or something. i rly need answers )
So i instaled succewsfulyl the jevelry 0.2 theme but my clock are not so big as in the pictures. I have just ordinary small black clock on the "today" screen. And my next problem is that under the start button is the grey strip continuing to a under battery indicator space, where is "T-Mobile" written. And same grey is behind the "contacts" and "programs" buttons on the "today" screen. How can i turn this to gold?
And the other question is have this phone "wake up alarm"? Or i just must set the "reminder" to wake me up?
Thank you very much for answers
moin aus deinem englisch und der tatsache das du ein mda hast
entnehm ich mal das du deutsch bisty
kannst du mirdas problemv nochmal erklären? die sache mit dem wecker ist recht einfach suchhier im forom mal nqch klaxon
is der beste wecker den es fürsmda/diamond gibt
Now hello people, I simply opens sometimes nen new subject, because I really in despair am. So I begin at the beginning sometimes. I wanted to me how I have already written in the other Tread, the m amine 2.0 flashen. If this has also acted like in the instructions described. So HrdSPL has folded everything. Only when I wanted then Rome Flashen, nothing has happened and I had my normal O2 Rome on it again. Then ahbe I the shaking it tries out where I had then the problem which I had no more receipt what I wanted to repair by another radio Rome. If everything has used, however, nothing. Now I have downloaded to me \ " 3LIT3 \ " IV Rome. everything is also quite good so far, only everything is there, unfortunately, on in English and I have Tom Tom 7 where my old maps do not go any more. When I now tried ahe, over again the m amine 2.0 to flashen, came he to 100% and then went out. . it came fehlermeldung image \ " corruptet \ " is and on the orbit 2 then the boat screen with the SPL 2.20 and on the right odebn RUUNBH. wars came.... Now I know really nciht more what I should do .... everything an O2 Rome tries to flaschen also miss. I hope somebody can help me here as fast as possible. Thank you schonmal in prerau. Now Olli Having tries sometimes the M.Amine Lite to flaschen, however, WWE. There everything claps funny enough
Hi 'oliver12685'
Nice Post ! But the problem is can not understand one bit of it .. though you tried hard ..
Hy,
sorry for my BAD english! it´s not so good.
can i write this in German??
oliver12685 said:
Hy, can i write this in German??
Click to expand...
Click to collapse
Well, I don't know German, probably you can write in German and try to give an English translation, and hope for any German friends on the forum to help.
Hi, I´m from Germany, but I don't understand your problem in English
German:
Hi, Ich bin Deutsch, aber kann dein Problem leider nicht auf Englisch verstehen. Schreib es bitte auf Deutsch und Englisch.
Ok I Try it in english
ok, now on my Handy I have the "3LIT3_VI_Full" Rom from this Forum.
The Problem is, its now in english.
I would the M.Amine 2.0 Rom in German, But its dosn´t work.
when i flash the Hard SPL its all fine. But when I Flash the M.Amine Rom it get to 100 % and than there comes an Error.
After a Restart comes the Reboot Screen . in the right corner is "RUUNBH" .
Why it dosn´t work?? Hard SPL 2.20 is flased.
So, I hope you understand me now
You needn't to re-Hard-SPL. When it's flashes once time, you needn't to do it a second time.
Have you tried it by another ROM? Is there the same problem?
German:
Du musst Hard-SPL nicht flashen, wenn du es schon einmal gemacht hast, des seit denn du hast den originalen Bootloader wieder geflasht.
Hast du es schon einmal mit einem anderen ROM versucht? Also kein M-Amine oder 3LIT3? Tritt da dasselbe Problem auf?
mutant92 said:
You needn't to re-Hard-SPL. When it's flashes once time, you needn't to do it a second time.
Have you tried it by another ROM? Is there the same problem?
German:
Du musst Hard-SPL nicht flashen, wenn du es schon einmal gemacht hast, des seit denn du hast den originalen Bootloader wieder geflasht.
Hast du es schon einmal mit einem anderen ROM versucht? Also kein M-Amine oder 3LIT3? Tritt da dasselbe Problem auf?
Click to expand...
Click to collapse
Das ist ja das Koriose, ich habe das Light M-Amine Rom WWE geflasht und da ging alles einwandfrei. und vorher hatte ich Bepe´s Rom. Da hatte ich das Problem, das ich so gut wie keinen empfang mehr hatte.
I have tryed the M-Amine Lite WWE Rom and its worked fine. But the Full Rom doesn´t work
Hast du Skype ?
English:
Do you have Skype?
Hi,
How are your flashing? And what is the error at 100%. Check the corresponding error code in the readme.doc from OEM. If you are flashing using SD card, better run from Win-XP (preferably). Do a Hard Reset, connect to ActiveSync and run the RUU at 'align screen'. Good Luck . !
mutant92 said:
Hast du Skype ?
Click to expand...
Click to collapse
Ja ich habe skype.
Could I get your Skype-Name (PM?!) please to help you?
German:
Kannst du mir bitte deinen Skype-Namen geben, damit ich dir besser helfen kann?
mutant92 said:
Could I get your Skype-Name (PM?!) please to help you?
Click to expand...
Click to collapse
At last there a German hand holding another. Enjoy ..
I think it's your Radio-Version that make problems. To solve the problem flash this
sorry for my poor english!!!
i have the same problem.
i have download an original rom : RUU_Polaris_HTC_WWE_1.25.405.1_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
on xda
and install it.
after i sucessfull intall the amine in french...
It can be your Radio! Please look at the Link given in this Thread, there you can download the Radio and your problem should be solved
Good Luck!
hallo, habe leider swype raufgezogen, neu gestartet und kann nicht mehr mein herkömmliches passwort zum entsperren verwenden, hard reset nicht möglich, wie kann ich das gerät nun starten? flashen? wenn nur diese möglichkeit, da bootloader angezeigt wird, welches rom sollte man nun in diesem modus verwenden?
lg
dietmar
originalsoftware, also rom war drauf
please respect the forum rules and post in english, or if you have to, post in your native language and at least attach an english version to that post.
and please explain your problem a little further, why exactly would installing swype prevent the device from accepting the right password or being able to hard reset?
btw. flashing the same rom again wouldn't really change anything, unless that flashing session comes with a hard reset.
hello
thanks for writing. i´m sorry, but my english isn´t very good.
today morning i installed a program called swype. before i used finger keyboard??2, but i wanted to try this one. i wanted this program for a bigger keyboard. after installing i started the device again, but wasn´t able to enable. normally i used the windows device lock, but i am not able to use my phone. in different forums it was written, that this ca happen by installing swype, also if you don´t have activated the device lock.
i´ve tried hard reset, but i´m not able to reset for factory. happily i have a copy of my adresses an numbers, but i really would like to solve this problem.
in the bootloadermode it is written:
blac100 32m
spl-1.14.0000
microp-blackstone (led) v6
is it possible to flash the phone in the bootloader or to hard reset it without the unlock code, which perhaps changed itself. with my code i´m not able to get in.
thanks for answering.
lg dietmar
problem solved
thanks for helping anyway.
lg
dietmar