Database Users

dead Prophet ??'

Hi everybody,
i habv a probelm, i have upgraded my new Prohet, and now it is dead.
I have te logo.screen, then i become this information on the screen:
IPL 2.15.0001
SPL 2.15.001
GSM 2.47.21
OS 2.15.3.22
after 20-30 sec i become e blank (white screen) thats all ;-)
USB connection i can not establis.
teraterm with USB rerout its nbot possible ???
i have do the hardreset (camera button - reset botton, then release, i become the same resultat as descripted before.
The Prohet i think is dead? or any ideas whart i can do ?
PS. Sorry about my bad bad english, i can describe in italian or german.
many thanks for any help or suggestions.
regards

try to flash another rom. you will get the bootloader by pressing the camera button and do a softreset at the same time.
Und auf Deutsch:
noch ist nicht zu spät!
Du kannst den Bootloader erreichen indem du die Kamertaste drückst und zeitgleich einen Softreset durchführst - Der Prophet sollte jetzt den dreifarbigen Bildschirm zeigen, dann einfach das Updatetool am PC starten und es sollte wieder funktionieren.

Same Issue here, Need Help
Recently flashed my phone prophet G3 stuck at the same page as yours, the solution used to be in PDAmobiz but the page has since been altered doesn'tgive the steps on getting to the 3 color page (bootloader). Anuone please help.

Charmer hangs in Bootloader

Hello,
can you help me please?
the charmer don't boot. It hangs at the bootscreen. at usb mode activesync dosent find the phone.
it shows.
ipl 2.06
spl 2.06.0000
gms 02.19.21
os 4.0.0.0
i want to flash the original firmware. how can i do?
greetings markus

Same problem pls an answer

Enter the bootloader mode and run official rom upgrade.

Bootloader Menu...
I can't make an update with the original firmware software. This Programm tolled me i must make a AktiveSync connetion. In Bootloader (CAM POWER Button) My computer find any USB device but activesync doesn't make a sync connection. Thats my problem. What can i do?
Greetings, Markus

Active sync wont make a connection when your in bootloader mode. The update program will work, it doesnt need active sync connection.

can you give me a link to the update?

I found it self. im so lucky because it do. sorry for my english. @ datenzwerg http://downloads.t-mobile.de/redire...ku3.3_38222_382117_026921_tmo_de_ger_ship.zip damit sollte es funktionieren auch wenn er eine sync verbindung haben will die brauch er aber nicht ein fach ins bootmenu und da dann usb an stecken und am computer starten ;-) bei mir hats geklappt

hoffe h mal das es funzt...
ich werde es probieren mehr als kaputt kann es eh net werden. hab halt a bisserl CID Panik da ich eine TMOBILE Austria sperre habe.
werde berichten wie es gegangen ist.
mfg markus

wrong ventor id
the german update doesn't run. the programm tells me wrong ventor id. i will dry the austrian one.
http://www.t-mobile.at/privat/servi...ftware/_files/MDA_compactII_AKU2_0_Update.exe
greetings, markus

Solved the Problem
Hello,
i've solved the problem.
The German 3.3 Version can't be install by ventor check.
The Austria 2.0 Version can't be install by Active Sync check.
I used the ROM form The Austrian Update and the Software from the
German update Pack.
My Charmer have a useable ROM!!!
Greetings Markus

aaaaaaaaaaaaaaaaaaaaaaaaaaaa
irgendwie klappt dat bei mir nich so recht
könnt ihr mir genau beschreiben was ich zu machen hab
ich hab das selbe problem mda2 Tmobile nach einem flash versuch geht es aus dem boot nicht raus usw
gibt es kein affengriff oder sowat damit er von alleine hoch bootet
thx
mfg
srox

dank an shayd
ua ich habs dank an shayd
Originally Posted by shayd
1. dowenload this t-mobile official rom
2. enter your Charmer into bootloader mode by pressing power + camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the Charmer to your pc (make sure your battery is fully charged)
4. run the t-mobile rom.
5. good luck!

Hallo!
I had the same problem with the vendor Id and i tried to flash the austrian t-mob version ! It worked but at about 40% it saied error and now the bootloader goes on and within 5 sec it wents of! SO i cannot try to flash another time!
What can i do?

Problems with roms....

Now hello people, I simply opens sometimes nen new subject, because I really in despair am. So I begin at the beginning sometimes. I wanted to me how I have already written in the other Tread, the m amine 2.0 flashen. If this has also acted like in the instructions described. So HrdSPL has folded everything. Only when I wanted then Rome Flashen, nothing has happened and I had my normal O2 Rome on it again. Then ahbe I the shaking it tries out where I had then the problem which I had no more receipt what I wanted to repair by another radio Rome. If everything has used, however, nothing. Now I have downloaded to me \ " 3LIT3 \ " IV Rome. everything is also quite good so far, only everything is there, unfortunately, on in English and I have Tom Tom 7 where my old maps do not go any more. When I now tried ahe, over again the m amine 2.0 to flashen, came he to 100% and then went out. . it came fehlermeldung image \ " corruptet \ " is and on the orbit 2 then the boat screen with the SPL 2.20 and on the right odebn RUUNBH. wars came.... Now I know really nciht more what I should do .... everything an O2 Rome tries to flaschen also miss. I hope somebody can help me here as fast as possible. Thank you schonmal in prerau. Now Olli Having tries sometimes the M.Amine Lite to flaschen, however, WWE. There everything claps funny enough

Hi 'oliver12685'
Nice Post ! But the problem is can not understand one bit of it .. though you tried hard ..

Hy,
sorry for my BAD english! it´s not so good.
can i write this in German??

oliver12685 said:
Hy, can i write this in German??
Click to expand...
Click to collapse
Well, I don't know German, probably you can write in German and try to give an English translation, and hope for any German friends on the forum to help.

Hi, I´m from Germany, but I don't understand your problem in English
German:
Hi, Ich bin Deutsch, aber kann dein Problem leider nicht auf Englisch verstehen. Schreib es bitte auf Deutsch und Englisch.

Ok I Try it in english
ok, now on my Handy I have the "3LIT3_VI_Full" Rom from this Forum.
The Problem is, its now in english.
I would the M.Amine 2.0 Rom in German, But its dosn´t work.
when i flash the Hard SPL its all fine. But when I Flash the M.Amine Rom it get to 100 % and than there comes an Error.
After a Restart comes the Reboot Screen . in the right corner is "RUUNBH" .
Why it dosn´t work?? Hard SPL 2.20 is flased.
So, I hope you understand me now

You needn't to re-Hard-SPL. When it's flashes once time, you needn't to do it a second time.
Have you tried it by another ROM? Is there the same problem?
German:
Du musst Hard-SPL nicht flashen, wenn du es schon einmal gemacht hast, des seit denn du hast den originalen Bootloader wieder geflasht.
Hast du es schon einmal mit einem anderen ROM versucht? Also kein M-Amine oder 3LIT3? Tritt da dasselbe Problem auf?

mutant92 said:
You needn't to re-Hard-SPL. When it's flashes once time, you needn't to do it a second time.
Have you tried it by another ROM? Is there the same problem?
German:
Du musst Hard-SPL nicht flashen, wenn du es schon einmal gemacht hast, des seit denn du hast den originalen Bootloader wieder geflasht.
Hast du es schon einmal mit einem anderen ROM versucht? Also kein M-Amine oder 3LIT3? Tritt da dasselbe Problem auf?
Click to expand...
Click to collapse
Das ist ja das Koriose, ich habe das Light M-Amine Rom WWE geflasht und da ging alles einwandfrei. und vorher hatte ich Bepe´s Rom. Da hatte ich das Problem, das ich so gut wie keinen empfang mehr hatte.
I have tryed the M-Amine Lite WWE Rom and its worked fine. But the Full Rom doesn´t work

Hast du Skype ?
English:
Do you have Skype?

Hi,
How are your flashing? And what is the error at 100%. Check the corresponding error code in the readme.doc from OEM. If you are flashing using SD card, better run from Win-XP (preferably). Do a Hard Reset, connect to ActiveSync and run the RUU at 'align screen'. Good Luck . !

mutant92 said:
Hast du Skype ?
Click to expand...
Click to collapse
Ja ich habe skype.

Could I get your Skype-Name (PM?!) please to help you?
German:
Kannst du mir bitte deinen Skype-Namen geben, damit ich dir besser helfen kann?

mutant92 said:
Could I get your Skype-Name (PM?!) please to help you?
Click to expand...
Click to collapse
At last there a German hand holding another. Enjoy ..

I think it's your Radio-Version that make problems. To solve the problem flash this

sorry for my poor english!!!
i have the same problem.
i have download an original rom : RUU_Polaris_HTC_WWE_1.25.405.1_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
on xda
and install it.
after i sucessfull intall the amine in french...

It can be your Radio! Please look at the Link given in this Thread, there you can download the Radio and your problem should be solved
Good Luck!

How debrand an Austrian (A1) x10i R1FA014

Hallo Leute, der Einfachheit halber schreib ich jetzt mal nicht in Englisch...
Ok ich hab ein X10i mit firmware R1FA014.
Soweit so gut, bis Punkt 5 der allgemein bekannten Schritten zum debranden läuft alles super aber dann:
1. Download files:
-SE PC Companion
2. Install PC Companion on your PC
3. Connect your phone when PC Companion asks
4. Check for updates - on this screen you will get the REPAIR option
5. Select repair - and let PC Companion guide you through it.
BIS HIER HER KEIN PROBLEM, ES SIND ABER KEINE FILES VON DER GRÖßE 110 oder 16 MB in dem Ordner!!!!
Maximal was mit 10 MB zu finden.
ICH HAB ECHT ÜBERALL GESUCHT; ABER AUCH IN ANDEREN ORDNERN IST NICHTS ZU FINDEN...
IST DAS EIN BEKANNTES PROBLEM?
WIE KANN ICH DAS X10i DENNOCH DEBRANDEN?
VIELLEICHT IST DER ORDNERVERLAUF JA AUCH ANDERS?
ICH VERWENDE VISTA und XP, aktuell hab ich hier gesucht und nichts gefunden:
C:\Programme\Sony Ericsson\Update Service\db\13740270\blob_fs
6. Go to the following directory (folder may be hidden)
For Windows Vista/7 C:/ProgramData/Sony Ericsson/SEMC OMSI Module/db/13740270/blob_fs) (Yes, ProgramData; not Program Files!)
For XP C:/Documents and Settings/All Users/Application Data/Sony Ericsson/SEMC OMSI Module/db/13740270/blob_fs
7. Sort the files by date in descending order
8. Look at the screenshot: http://img217.imageshack.us/img217/5554/x10deb.jpg
"Purple"]Dazu komme ich daher gar nicht mehr
9. Rename file 1 from the archive to the first file at the top (they should both be similar size (~110mb)
10. Rename file 2 from the archive to the second file at the top (they should both be similar size (~16mb)
11. Now copy both files from the archive into C:/ProgramData/Sony Ericsson/SEMC OMSI Module/db/13740270/blob_fs. If asked to overwrite, then do so.
12. Run PC Companion again. Go through steps 4 and 5.
13. After a successful update the phone will be unbranded.
(If you used Generic NCB files it is recommended to perform steps 4 and 5 once more. This will update the firmware to the newest, R1FB001, firmware.)
6. Go to the following directory (folder may be hidden)
For Windows Vista/7 C:/ProgramData/Sony Ericsson/SEMC OMSI Module/db/13740270/blob_fs) (Yes, ProgramData; not Program Files!)
For XP C:/Documents and Settings/All Users/Application Data/Sony Ericsson/SEMC OMSI Module/db/13740270/blob_fs
7. Sort the files by date in descending order
Bitte helft mir

1st of all, if you do not post in English always provide a translation
are you referring to the "Debranding X10" in general section? then you should have asked there instead of opening a new thread
drop a note, if the answer is yes I will transfer your post

Ich denke wenn man es sich so einfach machen will wird man keine Antwort bekommen ...
Ich will mal nicht so sein. Das einfachste Tool zum flashen (auch debranden) ist OMNIUS. Einfach mal googeln oder hier im Forum danach suchen. 2xGratis Account anlegen, bestätigen und in Omnius die Zugangsdaten eintragen.
R1...zip oben und die phone.zip darunter auswählen.
Firmware von hier nehmen:
http://forum.xda-developers.com/showthread.php?t=683793
Aber die Richtige (X10i - Shipped R1FA014 !!)
Danach könnte man sogar auf die R1FB001 updaten (optional)
@Moderator: Sorry that i not wrote back in english

in this particular case I can live with that
thx for answering his q
until I get an answer from OP...
Mod. edit: not dev related, moved to general

first of all thx for help...
Sorry, I didn´t know that I´m not allowed to write in german...
I was searching for a while but the only thing I found was the describtion which I put at the top.

@yalla
Could you please tell if it worked for you the way IxXxI told you ?
Did you do the step to R1FB001 also ? If yes How ? (Omnius, Seus)
I read in different forums that people bricked their X10 after flashing debranded firmware so I'm a bit curious. Mine is also R1FA014 and A1 branded.
THX

dont work
ok,
I have create an account and installed omnius.
Then settings-> server-setting-> I have put in the pass login.
After I was trying to "unlock" the phone I also was trying to "flash" the x10.
Nothing...
I get always the message "incorrect password"
please dont think that I´m to stupid to put in the right!!
I was trying to log in by using the webside, works...
Was trying to change the pass, works on webside, only on webside...
I was creating a different acc. works, put the same massege.
I think for me this way to debrand does not work
any idea

-Search WM 6 for MDA

Sorry my english is bad, i read in german.
Hi User,
ich habe einen MDA PM10A compact bekommen.
Meine Frage, kann ich WM 6 auf meinen MDA ziehen, wenn ja wo bekomme ich das passende Rom her und wie ziehe ich dieses drauf. Es wäre schön wenn mir jemand helfen könnte, such schon seit Tagen, nach einer Lösung.
Hier die Daten meines MDAs:
T-Mobil MDA PM10A
Windows Mobil 2003 2.Ausgabe
Version 4.21.1088
Build 15159.2.6.4
Rom 1.13.01 GER
CPU Intel PXA272
Vielleicht kann jemand mir helfen...Bitte...

Hi user,
I have got a MDA PM10A compakt.
My question, I can pull windows mobile 6 on my MDA if so where I get suitable Rome here and how I pull this. It would be nice if to me somebody could help, look already for days, for a solution.
Here the data of my MDAs:
T-Mobil MDA PM10A
Windows Mobile in 2003 2nd issue
Version 4/21/1088
Build 15159/2/6/4
Rome 1.13.01 GER
CPU Intel PXA272
Maybe somebody can help me... Please..

Arundian said:
Hi user,
I have got a MDA PM10A compakt.
My question, I can pull windows mobile 6 on my MDA if so where I get suitable Rome here and how I pull this. It would be nice if to me somebody could help, look already for days, for a solution.
Here the data of my MDAs:
T-Mobil MDA PM10A
Windows Mobile in 2003 2nd issue
Version 4/21/1088
Build 15159/2/6/4
Rome 1.13.01 GER
CPU Intel PXA272
Maybe somebody can help me... Please..
Click to expand...
Click to collapse
Nope, no chance to find a running German-WM6 for MDA Compact. You can use one of Cotullas english roms for the Magician, but be careful to choose the right one for your device.
Otherwise you can try to use the search button (or google) for : 'Home.1.01WM5.Installer' and 'home.ppc2003' to get a feeling like the OS with finger friendly touch.
Look for it in the alpine forum, as this device is (and will be) still stuck in WM2003SE.
Good Luck and nice to see you here. On problems feel free to PM me, as all these forums here are nearly dead.

vielen Dank...Thanks.
Habe bereits eine Rom mit WM6 gefunden und T-Online schreibt, WM6.1 geht bei dem MDA Compact. Nun weiß ich nicht wie ich es instalieren muss.
: Confused:

Interesting answer from T-online as cottula is the only one who build a working kitchen for WM6.X for the magician worldwide!
They never release modern builds for it!
Search here,
http://www.cotulla.pp.ru/Magician.html
choose the rom which fits to your device and how to flash you can find there, too. Tried once for a friend and it worked fine. Good Luck.