Related
Hi all, im kind of new to this but i just read about push email with exchange server and i was wondering how i could use it with my mda vario. I've already installed an updated rom with push email but i dont know how to use it. can any one fill me in on this? thanks for any help.
You need a Exchange 2003 server with at least SP2 installed. Also a UMTS/GPRS connection because is not working over WIFI.
Bitfrotter 8)
Go to www.mail2web.com, sign up there. Than put the settings from the website in the Exchange Server settings in Active Sync on your PPC. Set your current email address to automatically forward your email to your mail2web email address. Enable GPRS and enable push email from the Comm Manager and bingo, push email is yours.
Ok, ive already signed up with mail2web but i want to automatically retrieve hotmail emails. i don't see an option on hotmail to forward all my emails to mail2web. am i missing something here? sorry, im inexperienced and all and these are probably lame questions and all. but please help me out. after reading that article i got hyped up in doing this. thanks for any replies.
Bitfrotter said:
You need a Exchange 2003 server with at least SP2 installed. Also a UMTS/GPRS connection because is not working over WIFI.
Bitfrotter 8)
Click to expand...
Click to collapse
I've gotten DirectPush to work over WiFi... Maybe that was an earlier ROM version though... I don't recall the circumstances under which I got it to work.
MS says that Direct Push does not work over WiFi. WiFi does not allow disconnected connections (in other words, a connection that allows for the data stream to be suspended). If WiFi did it, it would require a continuous connection that would drain the batteries at a very rapid pace.
Setting up Exchange for Direct Push is pretty easy. I set up ours in about 5 minutes.
One of the coolest things you can do with a correctly configured Exchange 2003 system is with the Mobile Admin pack (free download from MS). It allows you to tell the PDA that it needs to "self-destruct" in case the phone is stolen. A remote wipe will do a hard-reset on the phone, deleting all data not stored on an external SD.
I usually get my email on the MDA faster than Outlook on my desktop.
If any Exchange admins are out there, I can post how to set it up if anyone needs help.
exchange/activesync
Yes please!
Hotmail has deleted the possibility of forwarding mail automatically a few years ago in the free version, only Hotmail Plus subscribers can use this option. With gmail however it is still free. So a basic hotmail account will not be able to use Push over Exchange. You can however sign in to MSN Messenger on your device and will then be notified as soon as an email arrives on the hotmail server. This will cost you extra data charges though, since contacts coming online will also result in data transfer to your device.
Romp said:
MS says that Direct Push does not work over WiFi. WiFi does not allow disconnected connections (in other words, a connection that allows for the data stream to be suspended). If WiFi did it, it would require a continuous connection that would drain the batteries at a very rapid pace.
Setting up Exchange for Direct Push is pretty easy. I set up ours in about 5 minutes.
One of the coolest things you can do with a correctly configured Exchange 2003 system is with the Mobile Admin pack (free download from MS). It allows you to tell the PDA that it needs to "self-destruct" in case the phone is stolen. A remote wipe will do a hard-reset on the phone, deleting all data not stored on an external SD.
I usually get my email on the MDA faster than Outlook on my desktop.
If any Exchange admins are out there, I can post how to set it up if anyone needs help.
Click to expand...
Click to collapse
that would be awesome if you know of a tutorial anywhere on this..
so by creating an exchange server as romp said, you can sync any email including hotmail? well that's really a bummer that microsoft disabled forwarding on hotmail. Its mainly my primary email which all my friends/family know. so it would be a miracle if anyone knew how to sync hotmail without subscribing to their hotmail plus.
Well, getting outside emails are a bit more complex. This is usually for a business, but there are plenty of POP-to-Exchange plug ins that would allow getting Hotmail emails. Of course, you would need the Hotmail Plus for the POP.
http://www.slipstick.com/exs/popconnect.htm
My answer was more concerning the Exchange Direct push question, not the hotmail one.
Where I work (yes, I did set up the Exchange system) we have GFI spam filtering and virus filtering (www.gfi.com) and they have a POP2Exchange bridge included. It just checks the account, downloads any POP emails, and drops it in the right mailbox.
Exchange is a complete system, not just mail. It has webmail, Windows Mobile direct push, calendar, contacts, and more. Unless you are in a company with Exchange or Small Business Server, its not a cheap thing to do for a home network.
If you DO have Exchange at your office, run to the IT guy and hurt him until he sets your phone up on it. Its all the functionality of Blackberry and more, built into Exchange.
I'll write that tutorial, g0nk.
ok so if we go the mail2web route... i dont need to install exchange 2003 on a pc myself? does it only work on windows server 2003?
im interested in doing this at my job but i want to make sure it is not too difficult
edit.. well we have our own domain email addresses so the [email protected] is not an option..
any suggestions?
Romp said:
Exchange is a complete system, not just mail. It has webmail, Windows Mobile direct push, calendar, contacts, and more.
If you DO have Exchange at your office, run to the IT guy and hurt him until he sets your phone up on it. Its all the functionality of Blackberry and more, built into Exchange.
I'll write that tutorial, g0nk.
Click to expand...
Click to collapse
1) Agreed
2) I am the IT guy and it don't work on our server - the rootcertificate won't install to the PPC - an MS acknowledged problem............
3) Please forward ASAP !! Thanks !! :lol:
Is it a self published cert? Because you CAN get any externally issued cert to work just fine. We use a $15 GoDaddy cert with no problems.
The big screw up most people have with the cert (myself included) is that the cert is not correctly installed, even though it says it is.
Cheaper certs are called "Chained" certs. All certs need a path back to one of the big cert companies. So, companies like GoDaddy get approved to be second level cert issuers. IE on the PC will look at the cert and track it back to the main cert issuer. For example, the cert on GoDaddy goes from GoDaddy, to Starfield, to VeriCert. The VeriCert certificate is installed on all PCs.
Anyway, the problem is that the PC can follow an undefined cert path, the PPC can't. If you install the cert on the server, IE on the PC can figure out the whole path, PPC can't. So, the big thing is to make sure the MIDDLE CERTS are installed on the server. Even though everything seems fine, chances are that the middle ones are not (in this case STARFIELD)
The easiest way to find out if the cert is valid or not is try to get to your webmail on PIE. If you get a message about the cert, your server is not set up completely.
For my server, I had no luck until I found the Intermediary Cert and installed it. https://certificates.starfieldtech.com/Repository.go
Once that was done, my GoDaddy cert worked on the PPC and syncs went perfectly. Once the server has all the certs in the cert path installed, the PPC can validate each level. Until then, its clueless. Most people think you need to install the cert on the PPC. Its the server that needs it.
Does the self published cert only cause problems with direct push? I've got the "old" polling method working. I created a root CA on my server to sign the cert created for the web server and then turned that root CA into a CAB which was installed on the PPC. I should say that my phone doesn't have an AKU 2.xx rom on yet so I've not tested push mail.
This is all outlined in the following doc :
http://www.microsoft.com/technet/itsolutions/mobile/deploy/msfpdepguide.mspx
Also look at http://support.microsoft.com/kb/817379 if you are running a non sbs2003 exchange server in a configuration that doesn't have a front end/back end exchange server configuration. As there are some minor tweeks needed to the registry and to the default web server setup.
If you can do a remote Activesync, then DirectPush will work just fine.
A newbie Direct Push question:
I upgraded my 8125 ROM to the official Cingular June 19 version, and direct push SEEMS to be working great my my Hosted Exchange provider. When new email comes in to my Exchange server and/or a task / calendar / contact is changed on the desktop Outlook client, those get pushed quickly to the 8125.
Problem is, it doesn't seem to work in reverse. For example, IF I get an email pushed to me on my PDA, I read it and delete it on my PDA.....that deletion action is NOT getting syncronized back to my Exchange server. Is that by design, or is indeed something wrong?
Thanks in advance!
not sure if it helps, but you can change when pocket outlook deletes mail, there are 3 options:
on connect/disconnect
immediately
manually
I dunno if changing that will help you at all, but its in the pocket outlook options.
I'll shut up now, in case I misunderstood
jmel said:
not sure if it helps, but you can change when pocket outlook deletes mail, there are 3 options:
on connect/disconnect
immediately
manually
I dunno if changing that will help you at all, but its in the pocket outlook options.
I'll shut up now, in case I misunderstood
Click to expand...
Click to collapse
I appreciate your reply, but my question is beyond that......it centers around Driect Push.....my thinking is, regardless of that setting you referred to, once the email is deleted on the PDA, the PDA should "reverse-push" that deletion to the Exchange server, and mine does not seem to be doing that.
I hope that is a little clearer?
No, his answer was right. The reverse of the Push is not the same. You have to set the options as Jmel suggested. Its basically to save data.
This allows you to go through your mail, delete all your spam and crap, then update the server. Doing so immediately would be a waste. Recieving/sending emails is considered vital, deleting them...not so much.
My company recently discontinued support for activesync in the exchange server. I found out about emoze and it was working, until they changed the webmail access. Now, instead of the pop-up that asks for login and password, the page itself has a field for login and password, so I'm guessing that's why emoze doesn't work anymore. Is there an alternative that works on these cases?
paulo_andre said:
My company recently discontinued support for activesync in the exchange server. I found out about emoze and it was working, until they changed the webmail access. Now, instead of the pop-up that asks for login and password, the page itself has a field for login and password, so I'm guessing that's why emoze doesn't work anymore. Is there an alternative that works on these cases?
Click to expand...
Click to collapse
Choices are limited really; you could sign-up for another push email service - the free one from Mail2Web (http://www.mail2web.com and look for the "live" option), or there is another one offered by an xda-devs forum member "DeniaL" (http://forum.xda-developers.com/showthread.php?t=305612).
Both of these are free, they work using push email, but the question is whether you want your corporate email held on "someone else's server".
It may be something you're allowed to do (or you could get away with ), but my company would **** on me from a great height if I forwarded my email to a third party.
I use Mail2Web for my Gmail account and a couple of others so I know it works well; the decision is yours!!!
HTH,
Mark.
no, I really can't do that, if there is a solution, it must use the company's server directly.
Quick question .. not sure if anyone can help or not.
My Company uses Xchange email and was wondering if there was a way to get this email pushed on to the phone first. I guess the main problem is that I am not sure if the company has pop enabled. Not really even sure what the incoming mail server and outgoing mail server are or where to find this information. Asking them really isnt an option... any thoughts?
This is the first thing that i tested with my Dopod. When it asked for servers, i just put in the web address to our Outlook Web Access site.
Hard reset after about 30 mins because my server enforced a 30min lock policy and i wasnt sure if i was allowed to hook my dopod upto the exchange server (we have strict policies about attaching non approved hardware to servers and or network)
Exchange servers don't use POP or SMTP, they use Exchange. So there are no 'incoming' or 'outgoing' mail server names.
Get your Exchange server address from your internal tech support group or your system administrator and go through the email account setup on your phone. You'll find one of the options early on is "Exchange Server".
You say that asking them for this info isn't an option, but it's the only way you're going to get this information. If you know where to look on your desktop, you can check your Outlook installation for the Exchange server name there. Otherwise, you're stuck having to ask someone.
If you just simply can't ask anyone, and can't find out on your own, it's a safe bet that your company doesn't want you to do this, and someone might get upset if you try.
i guess the real question here is. If I were to install the BBconnect 4.0 software on my phone; would this then allow me to access my company email on my Tytn?. The problem is that I am trying to get my company email on my Tytn without having to go to my corporate IT department and ask for official permission as they are idiots and say I do not have a need for this. Currently certain people have blackberry's in the company which they receive there email. From my point of view I could careless what they think I have a need for or dont. So in the end I am just trying to circumvent the IT department to achieve what I need. Any thoughts on how this could be done?
- Should also be noted that I have gone into my outlook settings on my Work PC; retrieved what is listed in there as the Microsoft Exchange server address and inputed this along with my netwrok id and password into my Tytn but when you do the Sync it does not work. I have also pinged the server address and inputed the IP# and tried that way unsucessfully as well ... any thoughts?
It's a pretty involved process. You will need to know the server addresss, user name and password and additionally an SSL certificate in order to get true push email. That's unless they use a big company like Verisign to provide SSL certificates. So you might have to talk to them...
First things first though.... Find out what the name of the exchange server is. You will also need a domain name. I'm sure you know what your username and password are.
NRGZ28 said:
It's a pretty involved process. You will need to know the server addresss, user name and password and additionally an SSL certificate in order to get true push email. That's unless they use a big company like Verisign to provide SSL certificates. So you might have to talk to them...
First things first though.... Find out what the name of the exchange server is. You will also need a domain name. I'm sure you know what your username and password are.
Click to expand...
Click to collapse
I have retrieved the domain name from going into the control panel and system icon and checked under computer name. So I know what the domain name is; I have also retrieved what is listed in the Microsoft Exchange Server address. However for some reason it still does not work; I am wondering if what is listed in the MES address field is only accessible if you are on the company internet and not an outside connection? - Thoughts?
If you retrieved that address from a computer on their internal network, than it's an "inside" address and it wont work on your phone. You need to figure out what the outside address is and it's pretty easy to do. It's usually "mail.blahblahcompanyname.com" or something like that.
Any thoughts on when the usual mail.blahblahcompanyname.com doesn't work? Any thoughts where one might find this information?
Yes. See above for my thoughts.
Pk2007 said:
Any thoughts on when the usual mail.blahblahcompanyname.com doesn't work? Any thoughts where one might find this information?
Click to expand...
Click to collapse
As mentioned by one of the posters above, the Outlook Web Access address is the best one to use to ensure that it is a valid routable host. You also mention that some of the other network users have blackberry devices. If your corporate IT guys are using Blackberry Enterprise Server, it may mean that Exchange Activesync is not enabled at the server end (or indeed that they are not using a late enough version of Exchange server) in which case, you will not be able to use it no matter what settings you have.
embeeowes said:
As mentioned by one of the posters above, the Outlook Web Access address is the best one to use to ensure that it is a valid routable host. You also mention that some of the other network users have blackberry devices. If your corporate IT guys are using Blackberry Enterprise Server, it may mean that Exchange Activesync is not enabled at the server end (or indeed that they are not using a late enough version of Exchange server) in which case, you will not be able to use it no matter what settings you have.
Click to expand...
Click to collapse
By Outlook Web Address; do you mean the website that you can visit to get your company email when you are away from the office?
Yes, try that address. Ours is https://blahblah.wahwah.com/exchange
If yours is also HTTPS you'll need the certificate. If it's a MAJOR provider like someone else posted, no worries, your device will handle it on its own. If it's a self-signed certificate, SOL.
pkley said:
Yes, try that address. Ours is https://blahblah.wahwah.com/exchange
If yours is also HTTPS you'll need the certificate. If it's a MAJOR provider like someone else posted, no worries, your device will handle it on its own. If it's a self-signed certificate, SOL.
Click to expand...
Click to collapse
Yeah I tried the web address that I login into my web mail when I am not in the office. However that does not seem to work either.
Thank you to all those who replied with useful information. Combined with the answers I received a little tinkering around; I was able to successfully accomplish what i was trying to do; which was receive company email without the involvement of the IT department.
computer misuse act
without sounding picky, you shouldnt be doing this unless you have explicit permission.
IT departments have specific policys in place to safeguard the data transmitted to mobile devices, and in this case, I doubt you know what these policies are and potentially opening up your corporate network for attack
all you have to do is call your IT department. Tell them you want to enable Outlook Mobile Access (OMA) on the server.
Once this is done, ask them for the Outlook Web Access (OWA) URL. Also, check to see if your server requires SSL or a domain (if you are unsure).
Once you're off the phone with IT, launch activesync on your ppc. press menu and choose "add server source"
enter your OWA address (without http:// or https://) and be sure to include " /exchange " without quotations at the end. press next. enter your outlook username. this is usually the same as your email before the @ symbol, however it can be different.
enter your password and then domain. ensure 'save password' is check. choose next
choose what you want to sync wirelessly , such as contacts, calendar, and task.
note: whatever you sync wirelessly will be deleted if you ever decide to stop using exchange activesycn
choose finish. the initial sync will begin. also, your company's security or it policy may force you to have a password on your phone. if so, you will be prompted during the initial sync to set up a password.
if you need any more help, let me know..
My company runs an exchange server for email, and I was wondering if anyknow knows how to connect to them, using the mogul. I went through the setup on the phone, with no success...Are their any additional steps required to connect to the server when you are not on the same network as the server?
Missing Certificate ?
I think you'll have to install the certificate from your Mailserver on the phone to get it working.
Do you get any active-sync error code when you're trying to sync ?
In general you get an error-code in ActiveSync which is telling you what's wrong...
IMHO the best idea would be: aks your IT-Stuff in your company
you need to add a server in active sync with your companys exchange server addy and your username/password
To be clear you need to enter your companies OWA server address. At most small companies this is your Exchange server and at most large companies it is your ISA server.
Example:
You access OWA using https://exchange.mycompany.com/exchange
You enter: exchange.mycompany.com in the activesync settings and you use your username, password and domain to authenticate
You also need to make sure Outlook Mobile Access is enabled on the Exchange Server and on your Exchange Mailbox. You will need to contact your IT Admin to verify these settings.
I'm in the same boat as the OP. I had been trying to hit the mail server directly or via VPN, with no luck, probably due to no certificate. Never thought about OWA. I set this up as indicated in the prior post, and checked 'Tasks' only (just to run a quick test), and it sync'ed fine. I then checked email and calendar, and now it takes me to a company sign-in web page (same page I encounter when using web access to OWA). Weird thing is the page is in the ActiveSync window and does not appear to be rendering correctly or completely (e.g. no 'submit' button). Nonetheless, I sign in and click where the submit button "should be" and the page goes away and it appears to start syncing, only to take me back to the sign-in page again after 15-20 seconds. Any suggestions on how to get past this point? I've tried logging in to OWA from IE, but ActiveSync still brings up this sign-in page. And yes, I've got my userID, pswd, and domain properly set up as well. Thanks.
BTW, my company IT won't help because they only support handheld access for specific company-issued devices.
try using mail.yourcompanymailserver.com/oma
its a lightweight version that handles easy in mobile browsers (only if your IT guys have enabled it)
as for the OP your exchange settings could vary depending on how your admin set it up, ssl (requiring a certificate) or not. to get the certificate from your company you can dl it from the server mail.yourcompanymailserver.com/cersrv
you log in using your mail credentials and you select download certificate chain and select a der 64.
save it to your phone and just install.
chances are though if your company is using a lot of treo's they dont require ssl because you can't install self issued certificates on them (good work palm). so if you want to ask your IT guys their setup and post it here i can try to walk through it with you.
this is my situation and how i got it to work.
Although i tried to internal address of 1x01po2s.domain.name, that didn't work.
I thought about it for a while, and reasoned if i can access my companies exchange server outside the network through a http://mail.domain.name address, then maybe that'll work hahaha
BAM! it did and now it works perfectly fine. Conincidentally, since i started trying to get this going last week, i emailed a few guys i know and the last one who got my email (it was forwarded to try to solve the problem) said that because of security policies, i am not allowed to do this. Ooops!
Here is a quick run down of my settings:
server address: mail.domain.name
ssl is selected (checked)
username: exchange/nt workstation login name
password: user password
domain: network domain (we have different domains)
save password is selected
under advanced you can select whatever options you like
next select e-mail, and any other options you want
and you're done!
I also enabled the push email icon and get my email regularly on my phone throughout the day.
Well, i hope that this helps some of you out.
server address: mail.domain.name
Click to expand...
Click to collapse
just so folks know there is no standard for this, its whatever subdomain your company decided to put OWA on, for my company its webmail.companywebsite.com
best thing to do would be to ask someone in your company how to access email from outside the office using internet explorer, thats the address your lookign for
Sprint mogul (Titan) WM6.1 Rom update killed exchange server activesync
(Sorry in advance for the long Email) I purchased a Mogul from RS about three weeks ago. For the first week, it worked great! I logged into my company exchange server down loaded and synced email, cal,contacts,tasks ... was very excited. I also got very excited when I started t read threads in this blog .... it seems like there are some pretty smart members maybe someone can help!!
Noticed that there was a new Rom (Sprint TV and improved connection) installed the ROM.
Have spent endless hours with HTC technical support, sprint technical support (not an appropriate name). At times managed to get the email to load but never again Cal, Tasks, contacts. Always able to get sent emails to load (by checking option) . I'm left with a couple of alternatives (any others would be greatly appreciated (actually I really like this phone but I need my email,schedule,etc to work) The error is 0x8503001C there is no exact description about this from MSmobile it seesm to be an awh**** code. Searching on the web provides 1000s of hits unfortunately not just my issue.
o Go to an early Rom WM6.0. So far it seems like to do this I need to unlock the phone then flash the earlier rom?? Since no SIM card I need to hack the registry?? There are several products out there which is best (I do not mind paying for somethng that works well). I down loaded several "Oficial ROm versions ... unfortunately did not write down the number of the one the phone came with.
o Find some way of getting this thing to work well to keep the extra features
o My grace period ends in a week ... cancel with Sprint go to Att but there is not a 3G phone I like ... only Iphone ... it has issues for exchange server??
o I got my wife a Touch at the same time (it runs WM6.1) same issue. Downloaded once my corp email no cal, etc.
o I was told that this Rom was cooked up by MS & Sprint what a disaster
Please, please help ... Thanks in advance
Scurfer
Exchange email and Skype not working after Upgrading Sprint Touch to Wm6.1
The Exchange activesync died at connection and never can sync my company emails after I upgraded Touch to 6.1 Sprint/HTC ROM. Skype also does not work, no sound after first ring, even with 2.2.0.45. I like the GPS and Rev.A speed, and do not want to risk downgrading the ROM. Anybody encounter ssimilar situation?
I have an Incredible with 2.2 and Touchdown installed. I just switched jobs to a corporation which claims to only support Iphone and Blackberry. This is troublesome, because I don't want to switch to a 2nd device just to get corporate email.
I can access my corporate email from my phone by going to the corporation's secure OWA server, but I want to get Push email on the phone. On the OWA site, it lists all the server and domain information, but I can't get Touchdown to work. It looks like the company uses Exchange 2007.
Since Touchdown is secure, is there any way for me to get push email from my company, even though they only claim to support iphone/Blackberry?
Stockmoose16 said:
I have an Incredible with 2.2 and Touchdown installed. I just switched jobs to a corporation which claims to only support Iphone and Blackberry. This is troublesome, because I don't want to switch to a 2nd device just to get corporate email.
I can access my corporate email from my phone by going to the corporation's secure OWA server, but I want to get Push email on the phone. On the OWA site, it lists all the server and domain information, but I can't get Touchdown to work. It looks like the company uses Exchange 2007.
Since Touchdown is secure, is there any way for me to get push email from my company, even though they only claim to support iphone/Blackberry?
Click to expand...
Click to collapse
even if they support just iphone and blackberry, you should be able to get it to work on the inc. just get the server address, domain name (chances are you wont really need it unless the server requires it but get it anyways) and it should work. just try setting it up on the regular phone email. I have exchange 2008 sbs and have no issues.
2.3 has exchange service
khanam said:
even if they support just iphone and blackberry, you should be able to get it to work on the inc. just get the server address, domain name (chances are you wont really need it unless the server requires it but get it anyways) and it should work. just try setting it up on the regular phone email. I have exchange 2008 sbs and have no issues.
Click to expand...
Click to collapse
How do I know which of the following to use as server address, domain... there are a lot of things that say server in the OWA general settings:
Exchange mailbox address: XXXX
Outlook Web Access host address: XXXX
Outlook Web Access host name: XXXX
Client Access server name: XXXX
Mailbox server name: XXXX
... I tried using "Outlook Web Access host address" and it did populate my email and calendar, but when I tried to update something on my calendar on either the device or the OWA server, they wouldn't sync correctly. It also wouldn't download my last 2 weeks worth of email, even though I have that selected in Touchdown.
Any advice on which of the above to enter?
r2DoesInc said:
2.3 has exchange service
Click to expand...
Click to collapse
What does that matter if my company doesn't support Android? Doesn't that mean they block these devices?
You can set up an Exchange ActiveSync account on the DINC. We just upgraded to Exchange 2010 (which means HTML emails pushed!) and the only thing you should need is the domain, server address, username, and password.
toosurreal01 said:
You can set up an Exchange ActiveSync account on the DINC. We just upgraded to Exchange 2010 (which means HTML emails pushed!) and the only thing you should need is the domain, server address, username, and password.
Click to expand...
Click to collapse
Ok, but you're not answering my question. If you look in the string above, I'm asking which address I enter for the server. There are multiple server names.
Stockmoose16 said:
How do I know which of the following to use as server address, domain... there are a lot of things that say server in the OWA general settings:
Exchange mailbox address: XXXX
Outlook Web Access host address: XXXX
Outlook Web Access host name: XXXX
Client Access server name: XXXX
Mailbox server name: XXXX
... I tried using "Outlook Web Access host address" and it did populate my email and calendar, but when I tried to update something on my calendar on either the device or the OWA server, they wouldn't sync correctly. It also wouldn't download my last 2 weeks worth of email, even though I have that selected in Touchdown.
Any advice on which of the above to enter?
Click to expand...
Click to collapse
None of the above will give you the server address and domain name. You will have to ask that from the tech support people in your office. it will be something like:
server address: mail.ibm.com
domain: ibm3
username: ssmith (should not be [email protected] format)
password: whatever you enter into owa
thats all you will need. just ask your tech support people. its the same info you would need to set up outlook access on mail.app if you have a mac. just tell them that and you should get the info u need
khanam said:
None of the above will give you the server address and domain name. You will have to ask that from the tech support people in your office. it will be something like:
server address: mail.ibm.com
domain: ibm3
username: ssmith (should not be [email protected] format)
password: whatever you enter into owa
thats all you will need. just ask your tech support people. its the same info you would need to set up outlook access on mail.app if you have a mac. just tell them that and you should get the info u need
Click to expand...
Click to collapse
If none of those are the right address, then why when I plugged in the server name that ended with "/owa" did my calendar and email populate on Android? I tried putting the same info into my Ipad and it wouldn't work. Also, my Android calendar doesn't seem to sync very accurately. But just curious as to why entering the server address that ended with /owa did anything?
############
EDIT:
Sorry, I'm burning the midnight fuel here and totally misses you're using Touchdown to connect. You can just skip to the bottom of this post then, my comments were in regards to using the built-in Exchange ActiveSync services on the phone.
###########
I definitely can't speak for every Android device out there, but since this post is in the Droid Incredible forum...
I'm running my Droid Inc. with version 2.2, which supports Exchange ActiveSync. Do you have an option to connect to Exchange ActiveSync on the phone? If so, the only things you'll need are your email address and password.
What I can tell you about that address /owa is exactly that: you've connected to the same website OWA server, you're looking at all this server info for. The website server and Exchange ActiveSync server are normally not the same server address, at least that's the way I run the servers for my company... It's also the reason everyone is telling you the info you have won't work, because the names and method to connect are different.
Your best bet is to ask them to send you the instructions they hand out for an iPhone to connect, since it also uses ActiveSync I'm positive whatever settings they're using will be the same. Either way, that's the closest information you'll get to the right settings.
Sent from my kickAss Incredible using XDA App
I use touchdown, an do IT for my company. In touchdown did you hit Menu-Enable Push? It sounds like you have it working, try adding an event to your calendar, then manually sync touchdown. Does an event or email show up then?
Sent from my girlfriend, according to my girlfriend.
There is a known issue in android that it will not work with exchange 2010 sp1 server. For some reason the sp1 on the server kills android ( but iPhone continues to function). It has to do with eas but this will hopefully be fixed in gingerbread.
Google bug report :
http://code.google.com/p/android/issues/detail?id=11177
Sent from my ADR6300 using XDA App
infotechsailor said:
There is a known issue in android that it will not work with exchange 2010 sp1 server. For some reason the sp1 on the server kills android ( but iPhone continues to function). It has to do with eas but this will hopefully be fixed in gingerbread.
Google bug report :
http://code.google.com/p/android/issues/detail?id=11177
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
It is a bug, but everything I read in that link was for connection issues with the native Exchange ActiveSync. TouchDown was the work around until they got the native Exchange ActiveSync working correctly, which I don't believe is the issue the OP is having since he's using TouchDown currently.
I've been using TD for the last three months on our Exchange system without issue. My phone vibrates before Outlook even pops up that I have an email, it's a "warning" system!
He said his corporation only supports iPhone & BB.
BB enforces the use of it's BES server license for security and RIM royalties.
Does iPhone have a similar solution to BES?
If so, android exchange may be futile.
GOOD / VOX would be a security product for android, similar to BES.
luvit said:
He said his corporation only supports iPhone & BB.
BB enforces the use of it's BES server license for security and RIM royalties.
Does iPhone have a similar solution to BES?
If so, android exchange may be futile.
GOOD / VOX would be a security product for android, similar to BES.
Click to expand...
Click to collapse
I got my work email to work with Moxier mail, but not Touchdown with the same settings my IT dept hands out for iphone. There are a couple of strange bugs though. I've noticed that when I leave the work Wifi and transfer over to either 3g or another wifi signal, my email, contacts, tasks, and calendar refreshes from scratch. This is super annoying because I have thousands of contacts. This happens in both Moxier and Touchdown...
And on to Touchdown, which has been the bane of my existence. I've entered the proper server/domain/login information, and 1/10 times it downloads everything from scratch (which takes hours). Then I'll switch to another wifi connection or to 3g, and I'll lose all the information and I'll have to hit resync. When I resync, 99% of the time it hangs somewhere along the line and doesn't load all of my information. This battle can go on indefinitely until everything finally loads - but then all the info will eventually randomly disappear again and I'm back at square one again.
Since the same thing is happening in both Touchdown and Moxier, it makes me think this isn't a coincidence. But why would my information erase when I change signals and then have to completely refresh? And Touchdown probably takes 10 times longer to reload my info than does Moxier.
Any thoughts from the experts?
Bump. Can't anyone help me with Touchdown? It keeps randomly refreshing. Sometimes it's just the inbox, sometimes the sent box, sometimes contacts, and sometimes all of the above. What is going on?
Try contacting the app support people yet?
You can set it to poll for the folders you want it to refresh. You can also enable or disable push, and you can select which folders to refresh. When it goes to refresh, it will always refresh what you've told it to, did you check these settings?
Sent from my girlfriend according to my current girlfriend
luvit said:
He said his corporation only supports iPhone & BB.
BB enforces the use of it's BES server license for security and RIM royalties.
Does iPhone have a similar solution to BES?
If so, android exchange may be futile.
Click to expand...
Click to collapse
iPhone and Android both use ActiveSync. If one works conceivably the other should, but it's a question of how they're administering the server side. I've seen IT departments that don't turn on ActiveSync at the user level until they confirm that the user is using an approved device.
The fact that the OP says that the calendar is synching and not mail says that it's a client side issue. For starters he should have to just specify the name of the server that's doing OWA and not the full URL path and he's stated that he's adding an /owa to the path.
So unless he has a really fubar Exchange server where he's at everything so far points to client config.