Related
I got a serious problem with my mda vario here.
sometimes, 7 out of 10 times, when i get a call the screen gets totally corrupted and jumbled like on the picture in the attachment. i can only see black vertical lines on a white screen. in order to make the screen work properly i have to turn the phone off/on (stand-by mode) then.
does anybody know where the problem is?
i have to confess, that the phone slipped out of my hands and fell on the ground 3 times so far.
thanks
well, you say youve dropped it 3 times already? is it possible that something may be loose inside? is there cosmetic damages from dropping?
yes, there are some scratches on it. i don't really think that something is loose or broken, because the screen gets only on icoming calls corrupted.
so i don't think that it is due to a loose contact or something like that...
I have exactly the same problem. I personally think it is unlikely that dropping the phone has caused it as it corrects when you cycle the power button. Any help on this from other forum member would be much appreciated.
roads said:
I have exactly the same problem. I personally think it is unlikely that dropping the phone has caused it as it corrects when you cycle the power button. Any help on this from other forum member would be much appreciated.
Click to expand...
Click to collapse
Any resoluation this? I have the exact same problem!!
Oh dear ... somethings in the air...
mine's got it also. first time i saw it was a couple of days ago. only happens with the alarm clock in the morning :?
My phone is crap like hell... gotta hard reset and reconfig the damn thing. acting up lately...
(ps... AFAIK i barely dropped the phone... maybe 1 or 2 times. nothing more)
I have the same problem
I have read the service manual of wizard and said:
Unusual Vertical / Horizontal lines or partial display
(1) Check the connection of LCM FPC whether is properly connected. (Is a conector between motherboard and LCD)
(2) Try with another LCM. (LCM=LCD Screen)
(3) Try with another Main Board.
(4) Replace LCM if necessary
(5) Replace Main Board if necessary.
(6) Once the defective part has been identified, verify it again with the defective part whether the
symptom could be duplicated
Any sugestion?
Okay..
so far, i have installed Molski 2.26 rom (30meg free version) and upgrade the radio rom form 2.25 to 2.47.
I have not had another occurance of this so far.
Maybe a fluke.
Screen fixes when pressure applied to bottom of the screen
Guys,
I now have to keep my finger pressed hard against the bottom of the lcd unit to get the screen to display to work properly. it is under warranty with Imate but they want me to send it to Abu Dhabi for repair. I'm in Canada and concerned that I may not get it back.
So has anybody else identified this as being a loose connection rather that a real hard fault. Also has anybody fixed their unit by dismantling and reseating the connections.
Finally has anybody used the Imate repair service and was it timely & reliable?
Any advice would be appreciated.
Mick
This is a real hard fault.. had it with my mini s, took it into the shop, it was away 2 weeks... and in the end they gave me a replacement!!
I agree - took it completely apart and cleaned everything ....
And still have the issue.
Serves me right for buying something in Middlesbrough I suppose
It must be a hard fault with the LCD assembly. Will have to see how Dixons handles an overseas repair.
Take care & thx,
Mick
I had the same problem, in the end i took it into my local t-mob shop to have it repaired, they ended up sending me a new one.
Well, I've exactly the same problem since the past two-three weeks, it also occurs only in the morning. I'm living in the Netherlands and this is happening since it's rather cold over here, especially in the morning (3-4 degree Celcius). Since my bedroom window is open during the night, it gets rather cold in my room.
During the rest of the day it is +8 degree Celcius, and the phone works flawless. Maybe this problem has something to do with the Temperature?
Temperature
Bebob - don't thin so as I have had this problem for a number of months and the temp here in the summer is high (30+ degrees C)
It looks to be a bad connection type issue and may be a bad screen cable. It makes sense though that the issue is at the bottom of the screen cos this is where we press the select buttons all of the time.
Pls keep me posted on how you do. mine is going to a local repair shop (on my dime) tomorrow to see if they can fix it.
If not can any of you guys recomend a new unit that could be considered an upgrade to the KJAM ?
Many thanks
Mick
suggestions needed
friends, i have o2 mini s and got the same problem with screen for the last 3 weeks....
can anyone tell me that will the problem aggravate or else will i be able to use my cell properly for few months...
and also what will be the approx cost of repair..
all suggestions will be warmly appreciated...
It's happened to me as well. I have lived with that for one month now. It is happening, when I touch the cursor keys or when touch the lower part of the display. I tried "shaking/hitting" the xda and it looks better, so I assume it is a faulty connection cable.
I have active Cleartype and no more vertical lines for the past 2 days.
I seems to be a problem when background is white and leters are black.
Regards
similar problem
i dropped the phone (T-Mobile MDA Vario) and now when i turn it on the screen is fine for 5-30 seconds but then it scrambles, but works again if i smack the bottom of the phone on my hand!
t-mobile staff told me there are sensors to identify if it has been dropped. I'm suspicious that it could even be programmed to go "faulty" once it is dropped as the screen is fine for a limited time so it obviously works somewhat. do you know if this is the case? or what's happened? also is it a simple thing i could do myself? i didn't take out insurance so that's why i haven't just claimed off that as i'm really broke
Any help is appreciated
Regards,
Steve
whiteish screen / over temperature
hi,
I have a problem smilar at qtek 9100. I had upgade to my ppc wm5 to wm6 around 3 week ago and overclocked to 221 mhz with batery status today plug-in . 2 days ago Screen became whiteish (almost no contrast or over gamma) and working temperature is around 30c. I tried to re-flash with many kind roms but noting chaged.
Is there anybody has these kind of experice. If I can not solve. I am planing to buy new LCD ( I am not sure new LCD will solve the problem)
Thanks
Same problem here. Dropped it ONE time and the screen went crazy. Sent it to my t-mob shop and they got it repaired. They said in the report that they changed the "flex". Dunno if this helps.
Hey all,
I've read these forums, and am 90% sure I have a defective Hermes. However, I'm unsure, as these forum posts were just text, and therefore can't really accurately describe the problems being seen. So, I made a YouTube video showing a couple of my issues, especially the screen fading to white. Like I say, I'd just like confirmation, and I'd like this post and video to serve as a help to others who are wondering if they have the same problem. You know what they say, a picture is worth a 1000 words .
Here are more details of my problems, in no particular order:
o The buttons reset after a quick power off and on (not a reset).
o The screen fade problem resets itself after a quick power off and on (not a reset).
o The screen calibration issue (not shown in video) seems to last a little longer sometimes. The issue is that calibration gets a little off. It seems to be by 10-20 pixels, but I can't repeat this as readily as the screen fade.
o This has happened with and without a memory card inserted.
o I've tried two different batteries, with the same results.
o I've tried three different firmwares (original, WM5 update, WM6 Black 2.0).
o The battery quick powerdown issue has only happened to me once (battery drains 10% every minute).
Here's the link to the video. It's only 84 seconds, so take a peek!
http://www.youtube.com/watch?v=zQWqTkoMX_4
Let me (and others) know your thoughts. It'd be appreciated.
PS... about the screen calibration...
FYI, I know about the screen calibration issues some have had wth the Hermes. However, I don't think this is that problem, since I never, ever have to recalibrate my phone. It always corrects itself eventually.
The screen calibration issue (not shown in video) seems to last a little longer sometimes. The issue is that calibration gets a little off. It seems to be by 10-20 pixels, but I can't repeat this as readily as the screen fade.
Click to expand...
Click to collapse
This has been documented HEAVILY in the wiki and the forums so I wont answer that.
The rest seems VERY weird indeed especially the screen going white?!?!
Is it still in warranty because I would so send it to be repaired.
Not seen anything like that on any forum. Are you keeping it somewhere hot or near an e.m. field just before use?
What additional apps have you installed? Do these problems still occur with an "empty" phone (i.e. right after a hard reset before installing third party apps)? If so then that should rule out software and firmware (ROM).
Fade to white issue: hardware problem IMO
Buttons stop working issue: looks like software IMO
Sleuth255 said:
Fade to white issue: hardware problem IMO
Buttons stop working issue: looks like software IMO
Click to expand...
Click to collapse
I agree, the screen going white is similar to when I had my O2 XDA EXEC (HTC Universal) in which whenever I moved the lcd into the mini laptop mode the screen would fade to pure white. When I sent it into PPC Tech they notified me saying in which the lcd cable was damaged itself. Im not sure if thats the case with you necesarily, since it seems the screen goes back to normal after powering the device to standby and back.
The keys are most likely software/rom issues. Perhaps maybe you should reflash to a recent rom and see what happens. Although if that doesnt work I suggest you send in for replacement or warranty. I neeever in the 6 months I had my phone did I ever have problems like the one you've listed.
::EDIT::
I just realized I saw that you tried multiple roms, if thats the case I realllly believe you have a defective phone. It does happen that one in a hundred tend to go bad..
Had similar occurance when mine had gotten damp.
fading screen and hardware buttons
Hi,
I've reported some time ago these issues, they started with LVSW Edition (2007-03-20) and after that Pro - BLACK 2.0, 2.5, 3.0 and still with 3.01.
I don't think is hardware related. i happens in random way. No specific apps or time or connection.
I've had similar issues with the buttons not working on my 8525. It seems to have to do with changing in and out of landscape mode. For example, I'll always have problems if I reset the phone and leave it in landscape mode and I always have to push the keyboard in and pull it back out to get everything working right.
If the buttons DO work, they are usually wrong, like up and down will instead move left to right. Again, pushing in and pulling out the keyboard fixes it for me. I recently upgraded to a new ROM and couldn't say if the problem persists or not.
As for the white screen issue - I'd say it's FUBAR'd.
My Cingular 8525 is having screens issues that I thought I'd post to the community if anyone has seen this.
The normal screen will go to all white under thermal conditions it appears. Thermal being inside a hot car, in my holster against my hip, gripping in my hand, heavy use with BT or wifi... thus I suspect thermal. I've changed battery's, no change. If it has changed to all white screen, a soft reset will not revert the screen back. The pda appears to have to "cool" off before screen will recover.
Could this be a LCD driver chip dieing? The screen itself? Worth repairing? Got my eye on the AT&T Fuze but wanted to keep the 8525 going for a few more months.
Thanks, Craig
holy crap I'm having the same problem. I havent determined heat to be the problem, but the only possible clue is that once, right after i hung up ona phone conversation, the screen turned semi white. If you looked real hard you could tell that the menus and programs were still operating normally, but the screen was screwy. using johkoss's V8 w. Manilla2D
Major problem, theres a MASSIVE thread going for this, sometimes it pays to use the search function.....
this is "the most common issue" on a hermes device.
I, personally, experienced it 3 times with 3 different hermes. Each time I had to send the device back to the shop. Because my device was under warranty, I always got a new one, free of charge.
You guys might want to check the Wiki, cause I believe there's a section there just dedicated for this issue.
I can't remember what the details are, but if my memory serves me right, it has something to do with the hardware (connection of cables to the screen).
I don't use hermes anymore, but I still come to the hermes forum every now and then...
Therer are actually a myriad of reasons you can get whitescreen, both hardware and software. From the descriptions though, it sounds like hardware.
This can be one of the most difficult things to fix as there may be multiple reasons and fixing one thing won't fix the issue.
^
I am agree with you. White screen may be appears occasionally and may be not. When white screen appears in my experience, it's enough to soft-reset.
May be different solutions with another?
HTC TyTN White Screen Issue with S/N Starting with HT6's
is your TyTN S/N start's with a HT6 you have a defective model for sure they are one of the first breads and are being known too have issues, so anyone make sure it starts with a HT733G4323 Etc, if your buying one of these used.
Or Even new Watch Out.
HTC TyTN
1.10
mobile 5
With 6.1 Plug-in's
Can't say that MY HT6 is a problem.. I actually found it faster than a HT7 (I have both). I did have to replace the LCD, BUT, it was because the touchscreen died, NOT whitescreen.
I bought the HT7 as a broken Hermes off ebay and found that it was actually less responsive than my older model. Used it to fix my older HT6 than use the HT7 motherboard in my, now, Frankenphone....
The "broken" Jasjam had a broken camera. It was actually just unplugged from the board. Liked my older model better...
Cheers...
White Screen
Hi to all,
I'm using PDAcorner v.20 w/ 5mb page pool,i to has encounter a white screen issue,it is true that its my be a hardware and software issue but if you only encounter white screen that all the time it is a software issue,you can check (schaps advance config) im using version 2.02.1.0.0 builtin in pdacorner v20 check the performance setting disable file system cache and file system filter cache in the glyph cache use only 8kb observe if the white screen will appear again.
hope that this will help all with white screen issue.
So My S5 worked great for 2 months or so but then the screen started flickering at very low brightness. As time passed the flickers increased and now whenever the brightness goes below half, the screen shows yellow flickers. That's not even the biggest problem, when i lock my phone and then press the lock/home button to turn on the screen, it shows a flash on the screen and goes dark again. This takes around 15-20 tries everytime almost (sometimes even A LOT more) to turn back on.
There was no water or fall damage.
I've tried factory/hard resetting, disabling hardware acceleration, disabling google chrome (worked for some people on the internet) still not solved.
I don't have warranty, and i'm willing to pay for some repairs but can someone help me out here and tell me where exactly is the problem? Cause i really don't want to pay for a new LCD. It's kinda costly. Thank You
ApexPredator01 said:
So My S5
Click to expand...
Click to collapse
I have the exact same problem but only at the bottom of the screen...I am sure is not a software problem because I tried everything (from reinstaling soft with odin from4.4 to 5, with kies, to CM12/13). If you find which is the hardware please let me know.
Thank you. I also don't have warranty and i got this flicker from November.
oia12344321 said:
I have the exact same problem but only at the bottom of the screen...I am sure is not a software problem because I tried everything (from reinstaling soft with odin from4.4 to 5, with kies, to CM12/13). If you find which is the hardware please let me know.
Thank you. I also don't have warranty and i got this flicker from November.
Click to expand...
Click to collapse
I also have this problem. I did bring my S5 for repair under warranty (but have knox tripped) and they REFUSED to repair it,because they think the problem is caused by ME. I did go to a lawyer, and I am gonna sue them. Will update you if I have new info. I am sure it is NOT a Software problem caused by the user,I also tried changing OS,reinstalling Stock,nothing solved my problem.
any update dear as i have the same problem but for me it happened when there was low light means in darkness so when i un tick the auto brightness it will be okay no more flickering issue
Same here. Flickers, stays black. Tho I can fiddle around and it will pick up touches, and have gotten it to reboot.
It will work fine charging. Batt icon works. It only seems to be an issue while its running.
Happens on stock and cyanogen 14.
I have noticed it seems to happen more when cold.
Same problem here on cyanogen 13.0, tried factory reset to no avail. I'm about to try flashing another ROM, just need to figure ou what.
Just done wiping and reinstalling new ROM, bumped up to 7.1 and the problem is still the same.
- Screen has difficulty turning and flickers when the brightness setting is low.
I guess it must be a hardware issue.
My fix for the moment is to disable automatic brightness and never set the brightness too low, so as to avoid have trouble turning on the screen.
Same here. It's a typical problem.
Same...
Sent from my SM-A520F using Tapatalk
I have a feeling that the problem is caused by overheating when charging. I fell asleep and woke up with the phone underneath me, it was blazing hot. It has been doing what the rest of you describe since then.
I am not 100% sure, but I've heard that it's due to the low voltage (brightness) being applied to the screen which is causing the flickering. Unsure why it's only the bottom half (Also happens on mine).
A work around for this is to install a screen-dimmer such as Darker, set the brightness on your phone to be above the flickering amount, then use Darker (or whatever app you use) to lower the brightness down.
Because Darker (or whatever app you use), is a filter, it won't change the voltage, thus no flickering.
do any of you have the always on feature enabled on the screen?
This problem is soooooooo often. Internet full of it.
Is AMOLED designed only to work for 2 years???
Anyone any information about that?
try downgrade firmware back to Android 4.0
Edit: nevermind, this didn't work
Perhaps AMOLED life time is short.
I will buy a LCD display next.
Same here only below the screen. It happened last month
BarrettBear said:
I am not 100% sure, but I've heard that it's due to the low voltage (brightness) being applied to the screen which is causing the flickering. Unsure why it's only the bottom half (Also happens on mine).
A work around for this is to install a screen-dimmer such as Darker, set the brightness on your phone to be above the flickering amount, then use Darker (or whatever app you use) to lower the brightness down.
Because Darker (or whatever app you use), is a filter, it won't change the voltage, thus no flickering.
Click to expand...
Click to collapse
How can we up to low brightness voltage? Is this possible?
It happens only at low temperatures. When you make your phone warmer, the flickering at low brightness stops.
Has anyone tried to check if some kind of cleaning the flex connector helps? I'm thinking about buying LCD sticker and give it a try.
I have the exact same problem and its related to temperature, I never face this problem in the summer.
ApexPredator01 said:
This takes around 15-20 tries everytime almost (sometimes even A LOT more) to turn back on.
Click to expand...
Click to collapse
Maybe your power button is broken?
I'm new to this forum, so I posted in general this problem I'm having since I don't know which category fits for this.
I know this forum is for software-related topics, but I've found hardware questions as well, so I guess this should be fine.
Basically, some time ago my phone started having this problem, which I suspect is hardware related, which is what they call screen burn.
Funny thing is, people usually say this problem is permanent, but in my case it's just temporal.
Sometimes my screen is working just fine, and suddenly starts flickering. If I try to switch apps, a "ghost image" of the other app stays there in the background, and until the screen refreshes, it takes time, or maybe I have to switch my screen on-off again, etc.
Another times It turns white, but I still can use my phone properly.
I've identified it's just a screen issue, because as I said, I can actually use my phone fine, but I have this flickers and ghost images. These ghost images are actually the most annoying problem when they happen.
To do some testing, I downloaded a burn-in test app to check every colour, and I've noticed that most colours work fine, but just the white and grey were weird? Like, maybe in the top of the screen the colour wouldn't show, but in the rest of the screen it was working.
Other times, the screen starts to display "colour lines" in front of everything, and after some time they disappear.
Want I want to know is, is this a hardware problem, or software? I guess it's hardware, I'd find it weird to be software.
If so, changing the screen would fix this ghost images and flickers? I haven't tried changing a phone screen before, but I can just buy one and there are videos for my model on how to change the screen so I could do it.
What I want to know is, how to fix this, and If replacing the screen would do. I honestly am against the consumerism trend of throwing away phones, so I at least want to try.
Thanks.
adrianjaramillo said:
I'm new to this forum, so I posted in general this problem I'm having since I don't know which category fits for this.
I know this forum is for software-related topics, but I've found hardware questions as well, so I guess this should be fine.
Basically, some time ago my phone started having this problem, which I suspect is hardware related, which is what they call screen burn.
Funny thing is, people usually say this problem is permanent, but in my case it's just temporal.
Sometimes my screen is working just fine, and suddenly starts flickering. If I try to switch apps, a "ghost image" of the other app stays there in the background, and until the screen refreshes, it takes time, or maybe I have to switch my screen on-off again, etc.
Another times It turns white, but I still can use my phone properly.
I've identified it's just a screen issue, because as I said, I can actually use my phone fine, but I have this flickers and ghost images. These ghost images are actually the most annoying problem when they happen.
To do some testing, I downloaded a burn-in test app to check every colour, and I've noticed that most colours work fine, but just the white and grey were weird? Like, maybe in the top of the screen the colour wouldn't show, but in the rest of the screen it was working.
Other times, the screen starts to display "colour lines" in front of everything, and after some time they disappear.
Want I want to know is, is this a hardware problem, or software? I guess it's hardware, I'd find it weird to be software.
If so, changing the screen would fix this ghost images and flickers? I haven't tried changing a phone screen before, but I can just buy one and there are videos for my model on how to change the screen so I could do it.
What I want to know is, how to fix this, and If replacing the screen would do. I honestly am against the consumerism trend of throwing away phones, so I at least want to try.
Thanks.
Click to expand...
Click to collapse
Hi...
so it could be software or hardware based.
first i would make a full backup and then try to completly reset the firmware and check if the issue is done
if not...it could be the screen or the mainboard or the connector to the mainboard.
at first i would try to change the screen to a new one. mostly the screen have problems. if that not work it can be the mainboard...for a buying a mainboard i would look at ebay for a completly damage devices just to remove the mainborad there and to buod in to your Device
hope that helps you
solong
speedson
speedson said:
Hi...
so it could be software or hardware based.
first i would make a full backup and then try to completly reset the firmware and check if the issue is done
if not...it could be the screen or the mainboard or the connector to the mainboard.
at first i would try to change the screen to a new one. mostly the screen have problems. if that not work it can be the mainboard...for a buying a mainboard i would look at ebay for a completly damage devices just to remove the mainborad there and to buod in to your Device
hope that helps you
solong
speedson
Click to expand...
Click to collapse
I commented my problem with a friend who studied CS with me, and he told me after seeing the phone that in his opinion it's likely the screen. I think so too.
It's ebay a decent play for buying a screen? Or better aliexpress? I've seen screens for huawei p10 lite in aliexpress
adrianjaramillo said:
I commented my problem with a friend who studied CS with me, and he told me after seeing the phone that in his opinion it's likely the screen. I think so too.
It's ebay a decent play for buying a screen? Or better aliexpress? I've seen screens for huawei p10 lite in aliexpress
Click to expand...
Click to collapse
Hi...
Idk if ebay or Alie would be better. I would take a look wich one could send it fastest to me and if it is original Part or from another manufacture.
Hello, I've been experiencing same kind of issues in recent months and I'm interested how the story continued and did fixing the screen was the solution?
Thanks in advance.