Database Users

Screen Alignment

Oh dear.
After thinking that software was causing an alignment problem (pretty sure MultiIE DID make it worse), I reset the device to factory settings and it still happened. Each day I needed to recalibrate the machine several times, making it unusable.
So it is in the post to HTC Europe for repair and I am without my MDA Compact!
Let's hope they fix it and send it back soon.

I am having the same problem with my O2 mini on which I have to realign the screen every hour or so. I have done many hard resets but there was no improvement. I have tried many ROMs as well. So I suspect its a hardware problem. Any suggestions apart from sending it to the service centre?

I'm having the same problem, I think our only solution is to take our JAMs to a service center

me too... but already pass my warranty period~!!!! da*n :!: some1 can tell me how much to fix this problem?? oh, again,

I think it's better
Maybe a little to early to say but I just got my Magician back from the HTC Europe centre.
They have simply re-flashed the Rom back to 1.12 (May 2005). When I first unpacked it I thught the screen was out of alignment again and rang to complain.
The thing is, I have since set it, played around with it for a few hours and it seems absolutely fine.
Since all my testing previously was with the November ROM (1.13), and the problem started around December time, I wonder if it's a problem with the new November Rom?
I'll keep you posted on what happens over the next few days.

Yes it was too early
Seems to be a problem still. What happens is it loses alignment after being switched off for more than a couple of minutes.
HTC are ringing me back soon.

It's going back again!!
HTC are taking it back for another look.

Observations
I have been living with the problem, and over the period have noticed that sometimes problem is not at all there, and sometimes its pretty bad.
Interestingly, when the problem crops up, if I press the screen a little harder with my finger, the screen just returns to normal alignment. So now I just press the screen instead of doing a screen alignment - takes only 1 second.

yeah~! same exacly here... just pressed it hard then it will back to normal but sometimes not, and still, im not happy with the quality of xda mini... for such an expensive toy, this \things should not happen to too many ppl.
thx,... waiting for your update... and pls let us know the cost...

Yippeee - it's fixed
Just got it back again from HTC Europe.
They have replaced the LCD and I now have perfect screen alignment again. I can even turn it off and the problem doesn't come back!
Very, very happy.
Repair was under warranty so it didn't cost me anything.
HTC have provided very good service to me on this. I am very impressed that they continued to listen and fixed the problem for me.

mini screen misalign
just started experiencing this about a week now, very iritating, and a bright dot appeared on my mini at the lower left edge, its especially obvious wen playing a video with dark or black scenes coz the dot is really bright
i still have warranty til may16 i hope i dnt have to bring it to the service cnter

screen alignment problem on HT634 Vario II

I'm really pissed off... being an medical intern I really need my Vario II (allready gave away my Vario I) and now I'm experiencing the screen alignment problems as described in previous versions! I was told these problems were solved and now have to re-align my screen about every time I turn on my phone.
Is anybody else experiencing this problem?

anyone who told that this is solved is a joker....
even the HT635XXX is having problem... you can return it back, and wait or go to another unit.
It's an expensive bet on a gamble

Today I received my repaired tytn back. SN HT627.
According to the serviceburo it should now be repaired according to the instruction of HTC.
parts used:
1x Gasket, Keypad.Apache For.
1x MYLAR,LCM CONN, BREEZE FOR
So, hopefully this really solved the problem.
Regards,
Piet

let us know.... if fixed.. it means it's a HW issue.. but dont know why even the latest batch still suffers on this ... :evil:

Screen alignment problem
Those of us with this pesky problem are just dying to hear how "pietg" is getting along after the mylar film Liquid Crystal Monitor connection has been replaced. Not quite sure why they changed the keyboard gasket.
Not that we want to hassle "pietg" but if this is the cure some of us will be straight in there with the tools for another look!!Best give it a few days as the problem sometimes vanishes for lengthy periods anyway - especially I've noticed after you've done a reassembly. (just as you think it's cured it's back)

Re: Screen alignment problem
mikechannon said:
Those of us with this pesky problem are just dying to hear how "pietg" is getting along after the mylar film Liquid Crystal Monitor connection has been replaced. Not quite sure why they changed the keyboard gasket.
Not that we want to hassle "pietg" but if this is the cure some of us will be straight in there with the tools for another look!!Best give it a few days as the problem sometimes vanishes for lengthy periods anyway - especially I've noticed after you've done a reassembly. (just as you think it's cured it's back)
Click to expand...
Click to collapse
Will give it a week before judging the repair.
Finally I will be able to start using this thing. A lot to learn, also a lot of usage. So if the problem returns it should be back in one week.
(By the way, the first time to problems occured after I started carring hte phone in my pockets. And the phone came under "pressure".
I wonder when other users are getting back there repaired Tytn, the same parts are replaced.
To be continued ......

hereby an update.
Untill totday still no problems anymore.
So for me the problems are solved.
Piet

Alignment
pietg said:
hereby an update.
Untill totday still no problems anymore.
So for me the problems are solved.
Piet
Click to expand...
Click to collapse
Pietg
Good news, partly based on your earlier post on parts replaced, I did my own fix which is also still working well.
Just ocassioally when drawing in "notes" I get spikey lines i.e. when drawing a straight line it actually draws a line with v shaped peaks or sometimes a line like a sinusoidal wave. It always settles down within a minute or so, no need to realign. Once when it happened I noticed the WiFi was reconnecting after a broken connection. This spikey line issue is not a big prblem and I think is unrelated to the usual screen alignment issues. I got the feeling it was caused by power surges or leakage currents when the device was performing power hungry tasks? I saw a LCM manufacturers site that said reistance based LCMs are highly suceptable to both power fluctuations and leakage current interferance.
Anyway your post pretty much confirms the physical cause of most folks general alignment problems.
Mike

Different manifestation of Screen Alignment issue

Hi, going through the emails on this list was indeed very useful. I bought an iMate JASJAM in January 2007 and it started giving me a weird problem with the screen.
The phone was working perfectly OK till Mid Feb when I started noticing that any application I opened (including phone or contacts) got closed automatically within a second. I observed carefully and saw that the 'X' on the top left corner of the screen was probably getting clicked on its own. I suspected it is most probably a screen problem and took it to the iMate service center. They promptly replaced the screen in 2 days.
It worked fine for 15 days before I am seeing the problem again. Could someone help me please. I am seriously dependent on email through my phone for my work. Would appreciate any sort of guidance, even if it seems obvious.
My JASJAM is 647XX s/n based
Thanks a ton,
Aditya Deshoande

If indeed the X is getting phantom taps, this is not a screen problem as such. In other words, you could replace the screen time and again and it would recur. The issue is that the screen gets pressre/pressed by the bezel around the screen. The screen is rather stupidly sensitive to touches even below the bezel. Pressure can arise from a slight twist in bezel, from heat expansion and from dust trapped between bezel and screen. You might try the "business card solution" - though it is not guaranteed.
I would also take a backup and do a hard reset. Try the problem apps without restoring the backup. This will identify whether it's software or the SA related problem.
f the problem is still there, I would demand a replacement not a fix, because if something is out of line it's not going to be fixed by swapping screens.
Mike

Thank you
Mike,
Thank you for posting a reply so quickly. I suspected it is not just a screen alignment issue the moment it appeared again. None of the fixes mentioned for the SA issue work. I just wanted to check if anyone has any suggestions to try something. There are no applications installed by me and I have tried hard reset. In fact the crosshair in the align screen application keeps moving without me touching the screen.
The problem is that this problem makes the phone useless because I cannot open the dialer. We need to be extremely careful of what iMate and HTC seem to be shipping out. This is a damn expensive phone to have such problems.
I will request for a replacement but would not be surprised if I am refused and told that it will be repaired since it is warranty.
Let us see if I need to drag them to consumer forum. I will, if the need arises.
Regards
Adi

Good luck Adi - I hope it works out. Yes that jumping around of the cross hairs does prove there is pressure being put on somewhere. Indeed HTC did appear to have largely resolved the SA and SA related problems - but I'm still seeing quite a few.
Cheers
Mike

Heats up during charging
Hi Mike,
Perhaps the problem is compounded by the fact that it really heats up if you charge the phone while it is still in the cover. The one with a belt clip that comes in the box
My screen does not respond to any taps anymore. Which in a way is good because I am at least able to call as well as send/receive emails.
Regards
Adi

Same problem here!
So my Hermes, which just got replaced by Cingular after the "red light..not charging problem" (Thanks for the pointers on that Mike!). But my new unit is also having phantom clicks on the x or in landscape the Start menu kept getting clicks. And I too got the moving crosshairs during screen alignment setup. Now the whole screen is whacked, not repsonding to any clicks.
Cingular are sending out another unit. I love my hermes, but seriously getting worried about the reliability of these units. I really can;t be without my unti working for too long, I'm stcuk having to go back to my SE P900 (with a flaky battery) or my SE S700 which sux.

It is a worry and very frustrating. However, when you get a good one it is well worth it. A hassle I know, but some folks here say they've been through 3/4 before being happy. This is the secret I think, put up with no physical defect and get an immediate replacement. Use a cheap mobile while you wait for the replacement. Most of the 'pain' comes from trying this and that and the other to get the device working and perhaps 6 out of ten times you fail. Use the warranty without hesitation. There ARE good ones out there!
My thought for today!!
Mike

Screen fading to white ongoing issue- MONEY AHEAD!

Hi all,
I need help,suggestions,anything with an issue I've had for a while. Since the time I started loading WM6 the screen has been randomly fading to white. I have LSVW latest rom 22/4 SE and 1.40.10 radio and 1.40oli although it doesn't matter what rom you load. I tried going back to WM5 and its better but now still fades to white as well.
on advise from oli and legolas I purchased a new battery but still have the same issue.
I have dropped my phone once which resulted in a crack to the right of the DEL/CR keys so could it be a HW issue and if you think so is it one I could open up the phone and fix?
Any and all help appreciated
IN FACT IF SOMEONE CAN RESOLVE THE ISSUE I WILL DONATE SOME CASH TO THEM!
test

Im updating to
LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04
seeing if any difference comes out.

This is not the first time this issue has been reported:
http://forum.xda-developers.com/archive/index.php/t-301003.html
The conclusion is that it's hardware related. It may be as simple as one of the internal ribbon connectors having a less than firm connection. It may be brought on my anything from physical movement or pressure to internal pressure if the device gats warm. However, it is possible that there is a failing component. IMHO, a case of take it for replacement/repair or first check connectors if your brave and not worried about a warranty.
Mike

mikechannon said:
This is not the first time this issue has been reported:
http://forum.xda-developers.com/archive/index.php/t-301003.html
The conclusion is that it's hardware related. It may be as simple as one of the internal ribbon connectors having a less than firm connection. It may be brought on my anything from physical movement or pressure to internal pressure if the device gats warm. However, it is possible that there is a failing component. IMHO, a case of take it for replacement/repair or first check connectors if your brave and not worried about a warranty.
Mike
Click to expand...
Click to collapse
HHmmm interesting thread .. the only issue i have out of that is the fade to white one.
Maybe Hardware .. i got the phone off ebay and now it has a crack in it .. so i dare say it isnt under warranty any more. (even though its a max of 6 months old).

It may also be software. I experienced the WSOD on my JASJAM when playing with the GPS-related DLL's. Once this problem appeared when switching on the camera. The screen would turn white and soft reset would not fix this, only power off/on would sort it out. Seems that the drivers do not reset (some of) the hardware to a known state on boot.

Had EXACTLY the same problem. Hoped it would be a software problem. Hard-reset a few times to no avail. Upgraded to a couple of the WM6 ROMs. No change. I did notice that when it was cool it tended not to happen, but after being on the phone a couple minutes or using the PDA for a while, it would do it AGAIN.
One weird thing I noticed was that if I did a Soft-reset and held down the Left Soft-key, I could "force" it to fade to white on start-up! VERY WEIRD.
I finally bit the bullet, and sent it back to Telstra to get it sorted. Didn't want to void warranty myself.
It has been just over 2 weeks since I sent it off, and They have sent this reply...
-------
-------
Hi
This phone is currently waiting on a part which was ordered yesterday. Some parts have already been issued but needs further repair.
Regards
Nadine
--------------------------------------------------------------------------------
From: LJ Boyd [mailto:[email protected]]
Sent: Friday, 20 April 2007 2:18 PM
To: ! TMS Customer Service
Subject: RE: Imate JASJAM Problem
Hello, I am emailing about an I-Mate JASJAM phone I sent for repairs early last week (tel # xxx ).
Can you please update me as to status of this repair, as the Telstra shop did not provide me with a second phone while I await return/repair/replacement of the phone.
Thanks,
-------
-------
So, I guess it IS a hardware problem. But then again, that kind of reply, sounds a bit "dodgy" as it doesn't seem to "technical" does it?
Hope this helps.

jyetara said:
So, I guess it IS a hardware problem. But then again, that kind of reply, sounds a bit "dodgy" as it doesn't seem to "technical" does it?
Hope this helps.
Click to expand...
Click to collapse
Their reply was not very technical - does not surprise me however. The people who repair these devices are usually faced with some component/connection/screen or a m/board that needs replaced. They often fail to take account of something as basic as the case pressing on the screen or other components - particularly when device is warm. So they replace the component they think is faulty and then discover the problem is still there. With this issue in particular I think that there are no faulty components just the case is a fraction of a millimetre too tight for the internal components and hence swapping out parts can have no effect. With this fault I advise people to go for a replacement not a repair if possible.
NB: This issue should not be confused with white screen that may appear after installing particular software or when an application crashes, or when the flashing of a new ROM goes wrong! The hardware issue arises most commonly when the device gets warm or put another way goes white after maybe 10 minutes of use and will continue to go white even after hard reset.
Mike

I have this same problem! =(
My phone screen recently (4-5 days ago) started to go white. I never saw this happen with my own eyes but when i picked up my phone and its sleeping i push the power button to get to an all white screen. I can hear noises when i touch the screen but no image other than white. I can solve this by removing the battery and putting it back in, then my scren works fine....its not verry often just like 1-3 times a day.
I want to try a hard reset but have a question first: My phone is unlocked by the ebay guy i got it from, will a hard reset lock my phone back to Cingular?
Next i want to try upgrading my ROM and Radio and anything else...im looking in the wiki for instructions on how to do this. Any help? What else shouls i upgrade?
Ive only had my Hermes for around 2 months so im new to much of this.
THanks!

I recently purchased a Used Imate Jasjam (Ex Telstra Australia) with this issue.
I pulled the unit apart, and reseated and pressed the Power and LCD Display Data Cables... attempting to ensure they were firmly fastened.
I then upgraded to LVSW's Latest WM6 Release.
I have had the Phone go to White once in that timeframe since. I brought it back by pressing the power button of, then one again.
I don't feel that it's really a "100%" Faulty Part... Because it works fine othertimes. It almost seems as if connections or a Data Cable has an Issue.
I'm intending tonight and using the Phone over the weekend to see if the issue continues to occur.

BAD NEWS!!
Well, got my phone back after a bit over 3 weeks I think? I kept ringing the repair center and emailing. Finally they said it was ready, and was sent back to the shop I bought it from. Rang the shop "no it's not here yet, we will ring you"... now the repair centre to the shop is a 20 min drive... on the 3rd, I rang again at 1pm and "no it's not here yet, we will ring you when it arrives." At this point I was really getting p*ed off. So I went to the shop, and demanded, and guess what was AT the Shop?!?!?!
Anyway, after 1 friggin day, I have lost the Red & Green phone buttons! As of tonight the whole bottom section no longer work, and the screen has gone white again.
The repair report listed 3 things replaced...one was a "bezel" another was a "poly" something. I will get the report a list the replaced bits if anyone likes, but their descriptions are kind of strange if ya ask me.
Anyway, I have to send the phone back for repairs again, which could take another 3 weeks +, which I think is completely PATHETIC OF TELSTRA, especially for the fact they dont give the same phone or even similar to "loan" while I wait for my defective $1300 phone to get "repaired"... (more like 'fiddled with' & "yeah, she'll be right mate"...
GRRRRR!!!!

My girlfriends phone was having the same problem. Try popping out your SD card and putting the phone into/out of sleep and see if that brings back a visible screen. Thats how we determined her situation was a hardware problem and not a problem with the rom.

jyetara said:
Well, got my phone back after a bit over 3 weeks I think? I kept ringing the repair center and emailing. Finally they said it was ready, and was sent back to the shop I bought it from. Rang the shop "no it's not here yet, we will ring you"... now the repair centre to the shop is a 20 min drive... on the 3rd, I rang again at 1pm and "no it's not here yet, we will ring you when it arrives." At this point I was really getting p*ed off. So I went to the shop, and demanded, and guess what was AT the Shop?!?!?!
Anyway, after 1 friggin day, I have lost the Red & Green phone buttons! As of tonight the whole bottom section no longer work, and the screen has gone white again.
The repair report listed 3 things replaced...one was a "bezel" another was a "poly" something. I will get the report a list the replaced bits if anyone likes, but their descriptions are kind of strange if ya ask me.
Anyway, I have to send the phone back for repairs again, which could take another 3 weeks +, which I think is completely PATHETIC OF TELSTRA, especially for the fact they dont give the same phone or even similar to "loan" while I wait for my defective $1300 phone to get "repaired"... (more like 'fiddled with' & "yeah, she'll be right mate"...
GRRRRR!!!!
Click to expand...
Click to collapse
Yes, sadly this is kind of predictable as I said in an earlier post in this thread:
http://forum.xda-developers.com/showpost.php?p=1233420&postcount=7
This is why, as I said, get a replacement not a repair if possible. My view is that the individual components are fine but connectors come loose or the heat generated causes pressure to be put on the screen etc So it's a problem with some cases and how the innards in some cases get squeezed. So off course changing the top poly board, connectors, bezel gasket, may by pot luck make a difference but is just as likely to make no difference at all.
Mike

Status Report:
After having my phone playing Video's Through the Night (My Way of a "Stress Test" to Generate Heat) I woke up the find the screen to be "almost completely" White.
Usually its gone completely, however in this instance I was able to see the icons through the whitewash.
I put the phone into sleep and back out and the Display is fine again.
Being that these phones are much easier to pull apart and put back together than my old JasJar I might to do some further experimentation.
I think the issue will have something to do with either one of the following
- Heat
- Pressure on the LCD from Parts Around it
- Faulty Ribbon or Power Leads to the LCD
My suggestions
- In the Case of Heat... I'll run the Same Test, with the Phone Directly in front of a small airconditioning unit I have.
- In the Case of Pressure, I'm going to look and see if I can place some extra Insulation Tape or Similar on the Phone to relieve this
- I wish I could find somewhere to buy the Replacement Ribbon Cables but I don't know where I can get them in Australia... any ideas?

VolarisPtyLtd said:
Status Report:
After having my phone playing Video's Through the Night (My Way of a "Stress Test" to Generate Heat) I woke up the find the screen to be "almost completely" White.
Usually its gone completely, however in this instance I was able to see the icons through the whitewash.
I put the phone into sleep and back out and the Display is fine again.
Being that these phones are much easier to pull apart and put back together than my old JasJar I might to do some further experimentation.
I think the issue will have something to do with either one of the following
- Heat
- Pressure on the LCD from Parts Around it
- Faulty Ribbon or Power Leads to the LCD
My suggestions
- In the Case of Heat... I'll run the Same Test, with the Phone Directly in front of a small airconditioning unit I have.
- In the Case of Pressure, I'm going to look and see if I can place some extra Insulation Tape or Similar on the Phone to relieve this
- I wish I could find somewhere to buy the Replacement Ribbon Cables but I don't know where I can get them in Australia... any ideas?
Click to expand...
Click to collapse
We wait to see. Mind you one guy on these boards found he could get half an hour from his device if he put it in the freezer for a while - so I'm not sure that air-con will be strong enough!!!
Mike

Well Results.....
After pulling apart the unit and reconnected, I think I found my cause to simply be excess pressure.
I've removed the "Black Plastic" Micro SD Card from its Blanking Plate.
Since I've done this... not one White Screen Whatsoever.
I don't use an SD Card, so the issue is resolved for me, however it is very interesting.
Could be Pressure or Heat (Small Hole Might Increase Airflow/Allow for Greater Dissapation or something)

Hi folks,
i've also small experience with this "white screen" issue and just wanted to inform you about it.
I got the device from my former boss who did already complain about this "white screen" issue on his O² XDA trion with original ROM. (honestly i did not really believe him due to my experience with couple of other devices so after i got the device i was just wondering - ok back to the facts).
I installed on Friday the Windows Mobile VI Pro - BLACK 2.5 Release and until today it was running (as far as i remember expect one time) nearly perfect w/o white screens. About 45min ago, i flashed the device with BLACK 3.0 Release and got until now about 5-10 times a white screen.
I assume this is not a hardware ONLY issue but indeed very strange.
I'll go back to 2.5 and will look forward if i get again the white screen or it'll be ok.
Cheers so far

FaCeOff said:
Hi folks,
i've also small experience with this "white screen" issue and just wanted to inform you about it.
I got the device from my former boss who did already complain about this "white screen" issue on his O² XDA trion with original ROM. (honestly i did not really believe him due to my experience with couple of other devices so after i got the device i was just wondering - ok back to the facts).
I installed on Friday the Windows Mobile VI Pro - BLACK 2.5 Release and until today it was running (as far as i remember expect one time) nearly perfect w/o white screens. About 45min ago, i flashed the device with BLACK 3.0 Release and got until now about 5-10 times a white screen.
I assume this is not a hardware ONLY issue but indeed very strange.
I'll go back to 2.5 and will look forward if i get again the white screen or it'll be ok.
Cheers so far
Click to expand...
Click to collapse
You are right to ask the question "is it hardware or software".
1
We know a white screens can arise if folk duff up flashing a new ROM.
2
We know there is a hardware caused white screen that comes and goes often when device gets warm.
3
But there maybe white screens caused by some kinds of crashing software or a buggy ROM etc
Crucially in terms of finding a cure will be distiguishing between these.
2 for most people is easy - take it back and get a replacement.
1 is a matter for the ROM upgrading and fixing boards
3 is a case of trying different ROMs testing 3 party software by selective installation until the problem starts or stops.
In your case I am worried that this is a number 2 device as it did sometimes get the problem before you flashed the ROM and now it's worse. It may only be worse because this particular ROM is generating more heat and consequently more white screens. (see explanations elsewhere).
I suppose if it's an occasional problem you might live with it but otherwise it's replacement at best and repair as a rather dodgy alternative.
Mike

Hey Mike,
well, before flashing the device with a custom ROM, in my opinion it was really difficult to use it.
By flashing it with V 2.5, it was very good usable and with V 3.0 it returned to become more unusable. Nevertheless, i upgraded 10min ago with HARD-SPL-V7 and it's running fine now (i've been wating with downgrading to V 2.5. If it returns to become unstable, i will downgrade to V 2.5 again.
I'll keep you informed.

yes for this particular "white screen" issue it will be useful to hear how things go - thanks
Mike

White screen - in my case definitely a hardware issue
Hi folks,
i was testing and playing around with my Hermes and today i found the problem (very funny because now i can't reproduce it anymore but just read ahead).
Today i was playing around and after pressing by accident on the case of the Hermes, the screen appeared disappeared and changed into white.
Please download the video i recorded from the attached link - you'll see that it was able to reproduce it by tapping on the case:
http://asuka.descipe.de/dphome/test/HTC_Hermes_White_Screen_issue.mp4
Please use VLC or MPC (additional codecs required) to watch the movie.
Honestly i'm not sure if this can be reproduced by anyone but this makes the whole situation much more clear.
Any feedback is welcome.
Cheers

Lower part of screen stopped responding

After 4 months of flawless work, the lower part of the screen (a strip several millimeters from the edge) suddenly stopped responding properly!
E.g., all buttons in this area (including launcher/phone/+ on home screen) either don't work at all, or sometimes activate after a while when strongly pressed with the thumb (orientation doesn't matter).
Just two hours before they responded fine to the index finger.
Also, I've noticed that when I "multi-touch" the lower line in a file browser with two fingers, it works nice! Buttons are too small for that, however
I first tried to restore backup, but it didn't help, of course.
Has anybody had the same problem?? I guess it's a warranty case ...

I would agree, it's probably a hardware problem that you'll have to bring your phone in for service to get fixed.

I'm having that same problem my self, but just now and then. What helped with me is that I press the upper left corner of the phone with my other hand and then the lower part works fine, so i think i should get a new digitizer or its just loose connector.

im having the same problem , i have put up with it for the past few weeks and its driving me nuts now. today i did a factory reset which made no difference , i called htc who didnt sound a bit suprised by my phone call it gets picked up tomorrow morning to go for repair so the question is ... is this a common fault? and how the hell am i gonna cope without my hero in my pocket ?

Yeah happened to mine last week, a few have had the same issue where it's just the launcher bit not responding. Although the good news is that I'm getting it back tomorrow though so it's good times!

I had the same problem with my touchscreen (after a month or so!)
Mine got picked up thursday by HTC and I just checked the tracking site and they just recieved it.
I wonder how long it's going to take

Visited their service center last week.
They've immediately replaced my screen with a new one without any ado. Now everything works as before!
BUT a friend of mine who bought his Hero in January is having similar problems now...

It is a common problem according to HTC.
Mine was repaired in just 10 days.

Same problem here, did htc said anything about this problem? is it a common fault?
thank you

I said it in the post above yours.

ah yes, right, thank you

mach2005 said:
It is a common problem according to HTC.
Click to expand...
Click to collapse
If they acknowledge it officially, couldn't you provide a link please?

i gave mine last week to repair, they returned to me unfixed. on the paper stated that they only updated the software, what a dumb this htc guys. need to go back and tell them again the same story. im wasting my time only for this. wtf

I recently had this problem. The 3 buttons at the bottom of the screen wouldn't respond, took it into T-Mobile who said I'd have it back within about 7 to 10 days... 3 weeks later I got a text saying I could collect my phone...
On the paper sheet it says they've replaced the lens.. Which I can see they have as before I had a miniscule hairline scratch near the top.
They also mention a software update (1.0.0.A6288)
Either way it works nicely now.

I've recently experienced the same issue - the lower part of the screen, the one where the LauncherPro icons usually are stopped responding to touch. If I press really hard it works sometimes, but it's pretty annoying. I didn't sit on the phone or drop it recently, it just stopped working all of a sudden.
Is there anything I can do, as the phone is out of warranty ?

HTC South Africa gave me a new hero after I took mine in for the 3rd time. Hardware problem. Very happy with their service.

i have this exact same problem, is the only solution to send to htc? >_> Cuz my warranty's out already unfortunately... i flashed my hero to CyanogenMod 7 and it seems to have helped, but still not completely responsive... I also have a problem where at times i completely lose control of my touch screen where the spots i touch seem to respond to opposite sides of the screen... anyone else?

Remove battery, Remove sim card. put a dryer on the htc logo for about 40 mins. put the phone under a heavy object. Let it dry for about 15 mins and your fixed.

^ wtf do u mean?... are u just being a gimp...

VillainRocks said:
Remove battery, Remove sim card. put a dryer on the htc logo for about 40 mins. put the phone under a heavy object. Let it dry for about 15 mins and your fixed.
Click to expand...
Click to collapse
i am having the same problem and i badly need to solve it please could u tell me that what do you exactly mean by put a dryer on the htc logo
thanks