Database Users

Bricked Device with Touch It German Final Rom from itje

Hello,
i have flashed my device new with the german touch it final rom from tije, which worked wonderful for me installing it first time (a month ago)
now i have flashed the rom again yesterday and my device stucks in the htc startscreen. nothing works (hardreset, softreset, removing battery)
please tell me what to do

Go into bootloader mode and flash with the german RUU (see Wiki and search for Details)
Then you can flash again.

thank you very much, this is the only thing i do not know (how to go to bootloader) but if it stands in the wiki, its all ok

ok what you need to do is hold the camera key and then hit the reset button... thatwill put you in boot loader

zacwhite15 said:
ok what you need to do is hold the camera key and then hit the reset button... thatwill put you in boot loader
Click to expand...
Click to collapse
sorry camera and reset worked thanks
but how can i flash my new rom now? i just checked the touch it final german rom from itje and i got the following message: no device connected - would you like to try copying again?
can i flash with official rom? how? i need active sync right?

ok everythings ok right now will flash with official htc wm6 now (works without active sync)
and then i will start again with itjes touch it rom, cause i know it works stable
EDIT: EVERYTHING WORKED FOR ME NOW, THIS IS HOW I LIKE IT ^^

Is it dead??

My Artemis is coming only to the splash screen (orange) and than is stooping. Is it bricked, since I tried to upgrade the new software??
Thanks

unfortunatly yes... may be...
Hi,
I had the same Problem wirth MDA C3 and this one was bricked... But i don´t tried to start the bootloader mode (on/off + speech-dial hardware button together and than the softreset button, hold the other two buttons and press only short the softreset button)
May be than you should be able to flash it once more... However, i read this tip to late, i changed my divece before so i can´t garantee that it works....
But give him a try, it´s worth the time !!
regadrs,
andi

u'll find it in the forums somewhere, u just need to flash it with a new ROM (and USPL if it isn't the original ROM) This can be done from Bootloader as suggested by Mr.Trader.

rilazi said:
My Artemis is coming only to the splash screen (orange) and than is stooping. Is it bricked, since I tried to upgrade the new software??
Thanks
Click to expand...
Click to collapse
obtain the original rom for your device and flash it. it should be all fine.
after, install uspl, and then you flash with any rom again.
regards,

bricked xperia-how to unbrick.

this is not a question,but sollution
i installed hard spl on x1,and the try to update with generic rom,and i stucked on 10%.when recovery was finish,nothing changed.10%again.i try with another rom,and it's installed to 100%,but x1 then keep on restarting.it's not even reach the main window,but stucked in 'sony ericsson'.if you have this issue,read tips below.
1. make x1 in bootloader mode (hold down volume down+power button)
2. hard reset your device
3. voila
xperia won't hard reset,if he won't be in bootloader mode first!!!and you need to instal at least one room to 100%.

rakec00 said:
this is not a question,but sollution
i installed hard spl on x1,and the try to update with generic rom,and i stucked on 10%.when recovery was finish,nothing changed.10%again.i try with another rom,and it's installed to 100%,but x1 then keep on restarting.it's not even reach the main window,but stucked in 'sony ericsson'.if you have this issue,read tips below.
1. make x1 in bootloader mode (hold down volume down+power button)
2. hard reset your device
3. voila
xperia won't hard reset,if he won't be in bootloader mode first!!!and you need to instal at least one room to 100%.
Click to expand...
Click to collapse
hi,
am having problem here. doing something wrong while flash rom & my x1 bricked. now bootloader shows no image. when turn on it stuck at sony logo.
how do i overcome this? please help.

me too..
just want to install the Energy Leo (this is my first time, n i've done the HARD-SPL before install the ROM)
did u mean that i should enter the bootloader mode n do the hard reset while in bootloader mode?
Thankyou very much!
sorry if my english is bad..
3rd party world..

fully bricked
Hi
After last power off Xperia X1 dont wake up at all
- no bootloader
- no hard reset
- no power up
- no any single spark of life
Is there some trick or JTAG to wake up the phone.
Thanks in advance.

charge the phone completely, enter bootloader using the camera button+power button, task29, then flash via RUU

task29 saved me after bricking my phone few days ago when my device disconnected during a rom installation... something i tried and hoped it worked then it did... RUU wont even install unless i task29 that heartbreaking moment

What is task29

Suhel28 said:
What is task29
Click to expand...
Click to collapse
its the miracle task

inheaven said:
its the miracle task
Click to expand...
Click to collapse
very funny can you please elaborate..

I would also like to know of this task of 29.
I'm screwing around allot on my phone and an accidental brick'ing would like to be un'bricked.

Htc p3400 hanged at start up page onyl

Dear Please help my PDA HTC p3400 has hanged at started up only at front screen only it is not moving further. i had done hard restet also then also not working. Please help me out .
Waitng for reply.

hard reset
Jeet8626 said:
Dear Please help my PDA HTC p3400 has hanged at started up only at front screen only it is not moving further. i had done hard restet also then also not working. Please help me out .
Waitng for reply.
Click to expand...
Click to collapse
do hard reset

i had done hard reset also

Try to bootup without the SD card (and may be SIM), I had this problem with my Vox, the SD Card was corrupted. After formatting the SD Card, everythig became normal.
Best of Luck

Same problem
Jeet8626 said:
Dear Please help my PDA HTC p3400 has hanged at started up only at front screen only it is not moving further. i had done hard restet also then also not working. Please help me out .
Waitng for reply.
Click to expand...
Click to collapse
Hi!
i have the same problemwith my P3400
i have made the upgrade to wm5 to wm6.1
the pda at the first time has booted and i have configured the regional time and the pen alignment until the the screen that says Setup complete, click to proceed (or something like this).
After this, it gets stuck on the windows mobile 6.1 boot screen
i have made the re-update with the same rom update.
the problem persists!
I have made with/without sd card and sim.
Now when it boots apears
ONBL 1.07.0000
SPL 1010.olip
GSM 02.84.90
OS 1.17.0.0
then changes for the wm6.1 boot screen
and stucks here
S/n-SZ716FW06338
XT01
GENE 100 (old gene i think)
please help me
thanks in advance
Pedro Matos (from Portugal)

matosmatos said:
Hi!
i have the same problemwith my P3400
i have made the upgrade to wm5 to wm6.1
the pda at the first time has booted and i have configured the regional time and the pen alignment until the the screen that says congratulations, click to proceed (or something like this).
After this, it gets stuck on the windows mobile 6.1 boot screen
i have made the re-update with the same rom update.
the problem persists!
I have made with/without sd card and sim.
Now when it boots apears
ONBL 1.07.0000
SPL 1010.olip
GSM 02.84.90
OS 1.17.0.0
then changes for the wm6.1 boot screen
and stucks here
S/n-SZ716FW06338
XT01
GENE 100 (old gene i think)
please help me
thanks in advance
Pedro Matos
Click to expand...
Click to collapse
i have done it!
Now i have the wm6.1
i found another rom update! (coooollll!!!!)
heheehehehhe
thanks anyway!

i have the same proplem you had can you tell me how you done it with new rom espiecly i cant flash room and i cant do anything
thanks

for ur info @matosmatos
hi
as per the numbers quoted by u urs is a old gene so falsh roms for old gene only this is just for ur info
goodluck
matosmatos said:
i have done it!
Now i have the wm6.1
i found another rom update! (coooollll!!!!)
heheehehehhe
thanks anyway!
Click to expand...
Click to collapse

@smb_do
hi
assuming ur phone is just dead ie just blank screen do this
1.power off the phone remove batter and press the power button 3 secs
2.put batter back in to the phone
3.Press camera button and then power on at the same time u will get tricolor
used usb and Flash new ROM
or press camera button and do soft reset using stylus this will also give u the tricolor use USB and flash new ROM
goodluck
smb_do said:
i have the same proplem you had can you tell me how you done it with new rom espiecly i cant flash room and i cant do anything
thanks
Click to expand...
Click to collapse

thasnffffffffff

Im so so saaaad
I try avery thing hard reset , now roms every time it accept the now rom and whine it restsrts again tha same problem it stop at
ONPL 1.07.0000
SPL 1.07.oref
GSM 02.79.90
OS 1.9.1.1
please help me send me at
ahmedrefaat82/hotmaill.com

gene hanges at start up page onyl (after rom Upgade)
I am also facing the same problem. I have old Gene. I had upgaded it to
Pro User's ROM WM 6.1 Sumit
Everything was running fine till I soft reseted the device. On soft reset it stucks at the start up screen
On boot it shows following
ONBL 1.07.0000
SPL 1010.olip
GSM 02.79.90
OS 1.17.0.0
Then it shows the windows animations and then it hangs.
This has happned to me twice.
I had installed following applications after the ROM upgrade. Does any application creating a problem
1) HTC Home (6 tab plugin)
2) S2U2,S2P,S2V
3) Quick Menu
4) Opera Mini
5) TCPMP with many codecs

satishgosavi said:
I am also facing the same problem. I have old Gene. I had upgaded it to
Pro User's ROM WM 6.1 Sumit
Everything was running fine till I soft reseted the device. On soft reset it stucks at the start up screen
On boot it shows following
ONBL 1.07.0000
SPL 1010.olip
GSM 02.79.90
OS 1.17.0.0
Then it shows the windows animations and then it hangs.
This has happned to me twice.
I had installed following applications after the ROM upgrade. Does any application creating a problem
1) HTC Home (6 tab plugin)
2) S2U2,S2P,S2V
3) Quick Menu
4) Opera Mini
5) TCPMP with many codecs
Click to expand...
Click to collapse
Not likely, try a hard reset and see if your issue is solved

Addicted2xda said:
Not likely, try a hard reset and see if your issue is solved
Click to expand...
Click to collapse
I had tried that also but not able to recover I had to burn the ROM again .
I am scared now to soft reset my gene. Never know when it will get hanged again. (pls note that it does not hang on every soft reset).
I liked the new ROM (6.1 pro Sumeet) so much. It is fast and have left enough room to add/execute other applications. I have read so many good comments about the ROM. I do not want to change it to any other version.
Please.. please try to get some solution.
Thanks in advance.
regards
Satish

It Worked
Thanxxxxxxxx

[HELP] Unable to boot into Windows

After I have installed the maatiROM.V3 ROM, my phone has not been able to boot into Windows properly.
It booted into Windows the first time after I installed the ROM, however, when I tried to restore the programs and reset the device, it tries to install the ROM automatically again, however, after its all done and reset, it holds on a white screen with the HTC logo.
Can someone please give me some advice?

Download youre Original rom for youre device. and get the Leo in 3 colour screen then connect the usb and flash the Original rom back.. than it must work.

Jowan073db said:
Download youre Original rom for youre device. and get the Leo in 3 colour screen then connect the usb and flash the Original rom back.. than it must work.
Click to expand...
Click to collapse
my original version is 1.48.831.0 (71294) WWE
but I couldn't find it
I have version RUU_Leo_HKCSL_CHT_1.48.832.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
but I dont know I need to use SSPL to install it or not....
I try to use SSPL to install it, but error [294] occur.....
WHAT CAN I DO???
thanks!!

kayzee said:
my original version is 1.48.831.0 (71294) WWE
but I couldn't find it
I have version RUU_Leo_HKCSL_CHT_1.48.832.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
but I dont know I need to use SSPL to install it or not....
I try to use SSPL to install it, but error [294] occur.....
WHAT CAN I DO???
thanks!!
Click to expand...
Click to collapse
Just download it from HTC support site... no need to use SSPL for this as it is the original ROM...

kurniawan77 said:
Just download it from HTC support site... no need to use SSPL for this as it is the original ROM...
Click to expand...
Click to collapse
I am come from Hong Kong
Hong Kong's HTC website no download link.....
I dont know which version should I install
I got two version now
one is Official WM6.5 ROM - HTC HD2 (Leo) - English Asian Version(1.48.707.2)
the other is Leo_HKCSL_CHT_1.48.832.1-this is a chinese version which released by CSL (CSL is the provider which sell the phone to me, but my original rom is 1.48.831.0 (71294) WWE(English))
so I am very confuse now...
dont know which one is suitable....
Any idea??
thanks thanks thanks thanks so so much!!

I tried to install both official english and CSL chinese version, its show error [294].......
What should I do??????
now, the phone can get into windows(maatiROM.V3 ROM),but the phone keeping crash...and I reset it....the phone will re-install the windows(maatiROM.V3 ROM) again.... then crash again, and I reset again, and the phone re-install again.....keeping repeat crash, and I reset it, and re-install windows.......
*CRYING*
I dont know what can I do now.........

In my opinion you can try the folowing:
- Remove sim and memory card and do a hard reset (with phone off , keep holding down the volume up and volume down keys and press power button, release all butons then press volume up again to restore manufacrurer deaults)
- Try to enter in boot mode (with phone off , keep holding the volume down and press power button) then flah again your phone
- If none of these helps and you can't find the original rom then use the GOLDCARD method. So make yourself a goldcard (serch the forum and you will find how to do that), boot your phone into flash mode with goldcard inside and you will be able to flash any original rom to your device
WBR
golumbu

golumbu said:
In my opinion you can try the folowing:
- Remove sim and memory card and do a hard reset (with phone off , keep holding down the volume up and volume down keys and press power button, release all butons then press volume up again to restore manufacrurer deaults)
- Try to enter in boot mode (with phone off , keep holding the volume down and press power button) then flah again your phone
- If none of these helps and you can't find the original rom then use the GOLDCARD method. So make yourself a goldcard (serch the forum and you will find how to do that), boot your phone into flash mode with goldcard inside and you will be able to flash any original rom to your device
WBR
golumbu
Click to expand...
Click to collapse
Thanks!!!I restored the phone to manufacurer default!Seems to be ok!!
thanks so much!!!
I

kayzee said:
Thanks!!!I restored the phone to manufacurer default!Seems to be ok!!
thanks so much!!!
I
Click to expand...
Click to collapse
It happened to me and I found out it is one of the reg tweaks in combination of a cab I installed did not work with maatiROM. The rom itself is stable and I use the Premium, which version did you use?

sakiin said:
It happened to me and I found out it is one of the reg tweaks in combination of a cab I installed did not work with maatiROM. The rom itself is stable and I use the Premium, which version did you use?
Click to expand...
Click to collapse
same as you!!!
I am using premium.....