Hi all,
I just upgrade my Xda Neo from wm5 to wm6 with Prophet_ShadoW_1.0 rom. The process upgrade went successfully; however, when I turned on the device, it stop at a picture of 3 different colors with words "TPL 2.15.001" and "SPL 2.15.001"
Can anyone help me solve this problem?
Thanks beforehand.
Related
Hi All,
I have had my MDA compact since April and all of a sudden over the last week or so it has started freezing up ???
Nothing i seem to do can wake it up and I am not getting any backlight. At present the time on the device is frozen at 21.25 the last time i had it working ??
The only remedy i have is to perform a soft reset which brings it back to life but only for a short while then it freezes again.
I have also tried performing a hard reset but the problem wont go away.
I only have the basic installation with not one single add on.
My device info is as follows
ROM Version - 1.01.00 WWE
ROM Date - 10/21/04
Radio Version - 1.00.10
Protocol Version - 1337.36
So if anyone can help me please post a suggestion. A mate has suggested a ROM upgrade but i cannot find one for the T-Mobile MDA Compact/
Please Help
Thanks in Advance
Kev
I also had this problem before and ROM upgrade help to me.
For upgrade Ur T_Mobile MDA Compact U can use any Qtek or I-mate ROMs for Magicians.
I use WWE_11200_550_11200.zip and haven't any problems now
In this topic: http://forum.xda-developers.com/viewtopic.php?p=166195 it is said the problem is hardware and a ROM update is useless.
CraF > Please explain what is fixed ...
Hello,
I wanted to upgrade my MDA Compact 2 to AKU3.
I started the update tool, like described in the forum here. The progressbar
on my MDA screen appears and when 95% are reached the update tool give me the ERROR [302]: UPDATE ERROR.
The reset of my MDA gives me only the 3color Boot-Loader Screen with the following Numbers:
IPL 2.06.0001
SPL 3.08.0001
and RUU in the right top corner.
Has anyone an idea to solve this problem, an downgrade to the old AKU2 can also not be done, because i get always the error about an wrong vendor ID.
I read a thread, to unlock CID, but this is not possible in Bootloader Mode, or?
thanks
Michael
SOLVED
Hello,
I solved my problem!!
I installed the Radio ROM Upgrade:
ftp://[email protected]/Uploads/Prophet/Prophet-roms/Radio_ROMs/Prophet_G3_G4_RadioRom_v2.69.21.exe
and it works.
There is maybe at 95% the Radio ROM Upgrade, and this worked not with the AKU 3.3 Image.
greets
Michael
I have the same issue. It's asking me for a password when I click on your link.
@optical, read the FAQ
@mwulz, thanks a lot ;-)
I got the same Problem. Does the link also work with the T-Mobile MDA Vario?
I don't want to crash my MDA Vario...
Thanks in advance
No, it won't help you. It's the radio rom, so it will not fit your wizard. You can try to flash any radio rom for wizard or any splash.
@mwulz
Thanks to you, I had the same problem (95% Error) and my mda compact II stoped working. With your tipp it works again!
Markus
mwulz said:
Hello,
I solved my problem!!
I installed the Radio ROM Upgrade:
ftp://[email protected]/Uploads/Prophet/Prophet-roms/Radio_ROMs/Prophet_G3_G4_RadioRom_v2.69.21.exe
and it works.
There is maybe at 95% the Radio ROM Upgrade, and this worked not with the AKU 3.3 Image.
greets
Michael
Click to expand...
Click to collapse
I have the same error on my Charmer with the AKU3.3, downloaded from the German T-mobile HP. Now I want to solve the problem with your described Radio-Rom but it is not downlodable from ftp://[email protected]/Up...adio_ROMs/Prophet_G3_G4_RadioRom_v2.69.21.exe !! What can I do??
it is downloadable, just type in password "xda".
thanks.
my charmer is in life again
hello everyone!
i am still abit new so please help!!!
how do i upgrade from my WM5 to WM6 on my xda orbit?
please can i get the dummies guide reply
Just read this page for the official WM6 upgrade.
http://member.htc.com/ruudownload/O...r=http://www.my-xda.com/xdaOrbitSoftware.html
Windows Mobile 6 on Orbit
Hello all,
This is my first post and hopefully useful.
http://www.my-xda.com/xdaOrbitSoftware.html
I have loaded it and it is brilliant.
remember to back-up you data first!!!!
regards
Warwick
Hi,
this Forum has so many and usefull information, that sometimes I don't know where to start searching.
I'm looking for WM6 to install in my Qtek S200 G3.
Is there any specific topic regarding this subject, with links to download WM6 and step-by-step instructions to install?
thanks in advance
Ayala
Man, does anyone read the wiki.
Yes, there is a whole sub forum for it!
Also please read the WiKi before doing anything!
Update WM6 for Qtek s200
Hi i hav a qtek s200 4g with windows mobile 5 , i wanna update it to WM 6, can someone help me plz
rpanaque said:
Hi i hav a qtek s200 4g with windows mobile 5 , i wanna update it to WM 6, can someone help me plz
Click to expand...
Click to collapse
I am using qtek s200 G4 with WM6. I updated the WM5 ROM wiht WM6. Everything works okey but there is still one problem; The battery is not standing long. I am trying a program called battery saver. If it works I will share the ROM and my updating notes with you.
Please me or give me the link to up upgrade my WM5 I-mate Jamin.
i want to upgrade it from 2005 to 2006.
Is there any update if yes pleae give me the link to up date.
Thanks in advance.
Dinesh
You must read the WiKi first!
Then go to this sub forum and you will find what you need.
WARNING!
You will void your warranty!
You may permanently brake your device!
Attempt this upgrade at your own risk!
After Upgrading Imate Jamin from 2005 to 2006, it just does not book. It comes on blue screen "I-mate" and stays there about 8-10 hours but does not boot.
Please help me. please please help me.
Try a hard reset, Hold the camera and comm manager buttons, and do a soft reset.
O2 Neo didn't boot
l3v5y,
One question, what could happened whith my mobile after a hard reset and it still didn't boot?
I have a O2 XDA Neo and I tried to upgrade my WM5 to WM6, but unfortunatly it didn't pass.
Now my O2 didn't boot.
Did you have any suggestion about this problem??
I will be so glad if someone could help me.
Thnks in advance.
Carlos Cunha
O2 XDA Neo
Can it enter bootloader (hold the camera button and soft reset)? if so, there is something in the wiki about recovering a failed upgrade.