Related
Hi Guys,
I know this might sound crazy but I was wondering if anyone is having this little problem.
Whenever I hold the jam by where the "i-mate" logo is, i hear and feel a slight click, it's as if the jam's case is not sealed correctly. If you don't knwo what i mean, it's like when you put ur thumb on the iMate logo and your pointing finger on the back of the jam and then pinch, you can feel the jam make a very slight click. The other four corners of the jam is fine and tight, but the i-mate logo corner seems to be slightly clicking and not tight whenever u squeeze or pinch it.
IS THIS JUST ME ?????????? if it is i should probably return it for another! PLEASE LET ME KNOW GUYS HELP!!!!! THANKS!!
no i dont think so :wink:
if u meant the cover then i have a little bit of click at i-mate logo
NightmarE said:
no i dont think so :wink:
if u meant the cover then i have a little bit of click at i-mate logo
Click to expand...
Click to collapse
YEA !!!! THAT's EXACTLY what i mean!!! at the i-mate logo, you have a bit of a click too right??????????? SO THIS IS ON ALL JAMS???
i think all i-mate jam units have the same problem, plus i looked up into 10units and i found that every unit has a little scratch on the cover in diffrent place ....
i thin the first version has some problem. well, i think the second versin willl has a few problems....
that just totally sucks... I think i will just go and super-glue it tight so it wont click no more
:lol: i'll let you guys know what happens, hahah
no klik for me
hahah are you SURE????? you just messing with us right?
Click
Yep, mine does it too.
On mine, I can see that it is being caused by the fact the case is a little loose at the back (behind the iMate logo!)
P
Just got mine today from Modaco and I'm really chuffed with it. No clicks, No Scratches. Its perfect. Anybody want to be an XDA IIs
No click here
Located under the battery cover, some above the rubber battery lock, to the right of the battery itself.
Does anybody know the usage of it?
Have asked before about it and no answer.. not even from QTEK ..
Would realy like to know what it is ..
Carlis
Hi,
Push the button in.. and you will see that the Jam turns on.....
It it the cover open/close switch..
Cheers
So this means we can change the cover???
That would be great !
Since I have my S100 for 2 weeks and droped it :-(
it has a bump on its head now.
Happens everytime I buy something new, it needs to be damaged a bit, before I have luck with it :lol:
Thx.. for open my eyes.. I must say .. how the h*** could I miss that.. hehe... was so sure the springs on the sides was some shortcut thingie with the back cover so it felt it was on ..
Learning every day ..
Carlis
Hi,
The 2 metal spring are for the bluetooth antenna, because the GSM antenne is under the upper part of the device...
Cheers
any more detailed instructins of how to remove the front cover and the upper back cover ?
got a friend that does paintjobs, would be nice with a personalized Qtek S100 pics and more tips please !!
How to hard reset MDA T-Mobile PINK.
Br.
A. Wahab
!! VERY IMPORTANT !!
try SEARCHING or RTFM.
regards.
Oh yes everyone, let's drop everything else and get to this right away ;-)
You can find ik here:
http://forum.xda-developers.com/search.php
I tried all over.. but don't found..
Its not a Magician..
its a wizard... and I tried but not found..
Anyone here please waste his 2mins to help me out.
Br.
A. Wahab
if you have same one as on the picture then its Magician..
Its not a Magician..,
Its don't have Intel processor.
waiting for reply from an expert.
Br.
A. Wahab
From the BACK Side its type is
PM200
Br.,
It's a bit complicated with the wizard version of the magician you've got...
First you need two STRONG magnets, a 220 volt wallsocket and some electrical wire.
Now you strip the wire and put the bare copper wire in your mini sd slot
place 1 of the magnets on the table, lay your wizician on it and the second magnet on top. (like a sandwich)
Then plug the electrical wire in your wallsocket and... BAM!! it will be hard reset.
OR
you could do a proper search on the forum
leploep said:
you could do a proper search on the forum
Click to expand...
Click to collapse
If u have skills to search proper. search and tell me link...
I am sure its is not a magician,
because hardware is diffrent..
Its have same hardware as
Qtek S110
I-mate JAM Black
waiting for reply from a person who have enough knowledge..
Br.
It is not a phone which can HARD RESET by pressing POWER + RESET
its have diffrent method to hard reset.. any one knoww????
hold down record and camera and tap reset at the bottom. keep holding record and camera until screen prompts you to push send (green phone) to reset.
The phone isnt magician or wizard, its a charmer. Jam black and S110 are both magicians.
leploep said:
It's a bit complicated with the wizard version of the magician you've got...
First you need two STRONG magnets, a 220 volt wallsocket and some electrical wire.
Now you strip the wire and put the bare copper wire in your mini sd slot
place 1 of the magnets on the table, lay your wizician on it and the second magnet on top. (like a sandwich)
Then plug the electrical wire in your wallsocket and... BAM!! it will be hard reset.
OR
you could do a proper search on the forum
Click to expand...
Click to collapse
I think it would be better if this was done while in a bathtub instead of on the table.
Kidding aside, as Dr. Mobile said in his first post : QTEK S110,
MDA T-Mobile PINK/BLACK, I-mate JAM BLACK.. This is definitely a Magician with the 128MB memory upgrade and WM5, right? I think this is the HTC Charmer?
The Wizard is supposed to be QTEK 9100, MDA Vario, I-Mate K-JAM. This has a slide-out keyboard
Here's the T-Mobile link to the specs corresponding to the picture posted :
http://www.t-mobile.co.uk/Dispatche...nType=pmt&pmid=7242&menuid=ctl_phones_details
Go Figure
dave106 said:
hold down record and camera and tap reset at the bottom. keep holding record and camera until screen prompts you to push send (green phone) to reset.
The phone isnt magician or wizard, its a charmer. Jam black and S110 are both magicians.
Click to expand...
Click to collapse
Spoiler :lol:
dave106 said:
hold down record and camera and tap reset at the bottom. keep holding record and camera until screen prompts you to push send (green phone) to reset.
The phone isnt magician or wizard, its a charmer. Jam black and S110 are both magicians.
Click to expand...
Click to collapse
You are the only Person who have some knowledge.
my problem is solved.
THANKS....
Jorgee said:
Here's the T-Mobile link to the specs corresponding to the picture posted :
http://www.t-mobile.co.uk/Dispatche...nType=pmt&pmid=7242&menuid=ctl_phones_details
Go Figure
Click to expand...
Click to collapse
Now thats really funny
Hello to everybody...
Member "Chaos42" has updated Wiki , he said that all problems with Tytn has been solved :
http://wiki.xda-developers.com/index.php?pagename=RecentChanges
He wrote that devices with Serial HT633 has got not problems.
Would you please "Chaos42" tell Us why you think so ? Have you tested a Tytn with this serial ? For how many days ?
As i read here :
www.mobile01.com/topicdetail.php?f=61&t=202144
seems that Tytn(s) with serial beginning with HT634 (that is greater that HT633) are not bug free..Language is Chinese, you can translate it with "Google's tools for languages".
Guys , i'm disoriented...Let's start talking about this news.
Bye!
Hello everybody,
is recieved my replacement unit five days ago. It is an TytN HT633xxx, ROMVers: 1.18.257.2 (07/22/06), Radio: 1.03.03.10, Protocol: 32.34.7010.01H, EXTROMVer: 1.18.257.105
and i have to say this device feels diferent/better then my old HT628 TyTN. The Keyboard feels more solid, the screenaligment problem has not occured once since i am using my device, and the most obvious thing was that the new battery was not fully coverd with a white plastic, but had a metalplate on the bottom instead. Alle buttons work as expected (also on the keyboard), the device is not getting hot when using wlan and the battery seems to last longer. So i am pretty happy with my new TyTn.
If there is anything you want to know or want me to check, feel free to ask
Thank you chaos42 for your reply... :wink: I was a little "suspicious" in my post because i've seen your Wiki's upgrade but i've not seen any your post in this forum before about Tytn and you registered your account only yesterday...So i thougt that this was a new Htc's commercial strategy to sell Tytn that seems to have,at the moment,many bugs.
What can you say us about :
1. During battery charge Tytn getting hot ?
2. This HT633 Tytn is in your hands since ?
3. Wi-fi range is good or poor ?
4. Screen switch from portrait to landscape when Tytn is in his guard or when keyboard is "opened" ?
5. The guard is like the previous or is a new one without magnet ? (The magnet seems to cause alignment and orientation issue to the display)
6. Any freeze problem ?
At the moment you and "randomelements" owns the most recent devices...let us to stay tuned on your tests...Thanks in advance.
Hi,
how did you get the new one? Did you replace it for free thru HTC support?
thanks
ferrari said:
Thank you chaos42 for your reply... :wink: I was a little "suspicious" in my post because i've seen your Wiki's upgrade but i've not seen any your post in this forum before about Tytn and you registered your account only yesterday...So i thougt that this was a new Htc's commercial strategy to sell Tytn that seems to have,at the moment,many bugs.
What can you say us about :
1. During battery charge Tytn getting hot ?
2. This HT633 Tytn is in your hands since ?
3. Wi-fi range is good or poor ?
4. Screen switch from portrait to landscape when Tytn is in his guard or when keyboard is "opened" ?
5. The guard is like the previous or is a new one without magnet ? (The magnet seems to cause alignment and orientation issue to the display)
6. Any freeze problem ?
At the moment you and "randomelements" owns the most recent devices...let us to stay tuned on your tests...Thanks in advance.
Click to expand...
Click to collapse
I dont work for HTC nor i am in any way related to HTC
For the last ten years i was a heavy and loyal palmuser so, i stayed away from ppc-forums :roll:
the tytn is my first ppc device...
1: This was my problem with my old HT628 especialy when charging and using wlan at the same time. This problem is completly gone. This is maybe related to the new design of the battery, with the metalplate on the bottom. And for me the battery lasts now about 30% longer.
2: five days, playing a lot with it
3: its slightly better, but i only tested it at home, so i have to do some more tests
4: the screen still keeps switching when i take it out of the case, because of the magnets in that damm case. When using the keyboard the screen switches as expected, no more freezeing during screenswitch
5: still the one with magnets
6: no freezing until now, no need for a softreset since i got it
cheers,
chaos42
nicolochi said:
Hi,
how did you get the new one? Did you replace it for free thru HTC support?
thanks
Click to expand...
Click to collapse
Yes, the friendly support told me that during the first 4 weeks they replace it for free. I just called them to ask if its normal that the device gets pretty hot during charging especialy when using wlan at the same time. She said, she has to ask, but after mentioning my screen alignment problems she said i will get a replacement unit, and i should send it in as soon as possible because its a know hardware issue.
I also called the repairecenter in germany, just because i wanted to know how long it will take, and after i said that i got the screen aligment issue, they laughed and told me i will get a replayment unit for sure. four days later i had my new tytn. thumps up for the htc support!
Hello,
Only to say that the initial TyTN Spanish version is:
ROMVers: 1.18.262.2 (07/22/06)
Radio: 1.03.03.10
Protocol: 32.34.7010.01H
EXTROMVer: 1.18.262.105
1. During battery charge Tytn getting hot ? >>> NO
2. This HT633 Tytn is in your hands since ? >>> 2 weeks
3. Wi-fi range is good or poor ? >>> Poor (my Qtek 9100 has better range)
4. Screen switch from portrait to landscape when Tytn is in his guard or when keyboard is "opened" ? >>> YES, like the Qtek 9100, because de magnet (if you put the magnet near the camera buttón screen change, there is a magnetic swith inside)
5. The guard is like the previous or is a new one without magnet ? (The magnet seems to cause alignment and orientation issue to the display) >>> The guard is like the Qtek 9100's, 4 magnets, but leather.
6. Any freeze problem ? >>> NO
chaos42 said:
I also called the repairecenter in germany, just because i wanted to know how long it will take, and after i said that i got the screen aligment issue, they laughed and told me i will get a replayment unit for sure. four days later i had my new tytn. thumps up for the htc support!
Click to expand...
Click to collapse
I called the servicedesk today and the lady told me different.
They have been waiting for an answer from HTC. And got it yesterday.
HTC mailed them how to repair the Tytn (replace parts) and they are not allowed to replace the Tytn's.
So, new policies??
Well, wil wait and see which phone I get back.
Regards,
Piet
pietg said:
I called the servicedesk today and the lady told me different.
They have been waiting for an answer from HTC. And got it yesterday.
HTC mailed them how to repair the Tytn (replace parts) and they are not allowed to replace the Tytn's.
So, new policies??
Well, wil wait and see which phone I get back.
Regards,
Piet
Click to expand...
Click to collapse
i was told that during the first four weeks, the phone will be replaced. Is your phone older than 4 weeks? maybe they handel this different in each country.
hope you will get a functional phone soon
chaos42
chaos42 said:
pietg said:
I called the servicedesk today and the lady told me different.
They have been waiting for an answer from HTC. And got it yesterday.
HTC mailed them how to repair the Tytn (replace parts) and they are not allowed to replace the Tytn's.
So, new policies??
Well, wil wait and see which phone I get back.
Regards,
Piet
Click to expand...
Click to collapse
i was told that during the first four weeks, the phone will be replaced. Is your phone older than 4 weeks? maybe they handel this different in each country.
hope you will get a functional phone soon
chaos42
Click to expand...
Click to collapse
NO, it was only one week old when I send in. By now it is 5 weeks old
We will see.
PIet
So MacPac you think the magnets in the case are causing the screen alignment issue? Because any magnet powerful enough to effect a switch inside the device cant be having good effects on the screen alignment, is that a logical notion?
Just updated the wiki to include HT634 (HERM300). only issue I've noticed is that some of the keys aren't as responsive as the others. Does anybody else have this version and experiencing similar issues or do I have a duff unit?
herman3101 wrote :
Just updated the wiki to include HT634 (HERM300). only issue I've noticed is that some of the keys aren't as responsive as the others. Does anybody else have this version and experiencing similar issues or do I have a duff unit?
Click to expand...
Click to collapse
Hello herman3101 !
What can you say us about :
1. During battery charge Tytn getting hot ?
2. This HT633 Tytn is in your hands since ?
3. Wi-fi range is good or poor ?
4. Screen switch from portrait to landscape when Tytn is in his guard or when keyboard is "opened" ?
5. The guard is like the previous or is a new one without magnet ? (The magnet seems to cause alignment and orientation issue to the display)
6. Any freeze problem ?
Thanks...
Have a "small" problem with my touchscreen, it requires to be aligned every day,and by that i mean that the alignment doesn't hold much long...that means sms typing is extremely hard when you push one letter he shows you another that lays next to it .Is it due to the touchscreen or the system....i didn't do any ROM update i still have the original software on him:
ROM Ver.: 1.12.01 GER
Radio Ver. : 1.12.00
ExtRom ver. : 1.12.151 GER
Many thanks!!
i think it it the problem of touch screen
i think it it the problem of touch screen.after extrem use of touch screen its loes the alinement for this you replace the touch screen from your hardware guy.
Thanks for all
Hi i fixed the problem with a ROM update and i didn't install extra programs that i had before like ( Pocket plus or Calendar ++...... ), anyway now i don't have to align the screen. I don't know is it the ROM update or the additional software but the touchscreen is now working perfectly.
So if someone else have a similar problem don't replace the screen right away.
Thanks
it's hardware problem.
my xda mini also..
but i know how to fix this problem.
Maybe with you it was, my MDA is now working perfectly and i don't need to align my screen every day as i did before.That doesn't mean that all have such a problem,i am only telling you my experience with it.
Best regards from Vienna
Hello, in my magician is not everyday, hapens all the time that i turn on it.
I had replace it 3 times, but i can find a good dealer of touchs. You knows one that seel a good touch?
regard's,
Ricardo
Guys,
I've had that problem for a LONG time and today i finally got tired and decided to fixed it...here's how i've done it: You just need to lift a little bit up, a few small metal pins which are all around the touchscreen (see the picture in attachment). This will force the touchscreen to remain in place and will end all your problems related to touchscreen alignments.
Regards,
Keeper
so it does help? what do these pins do?
IS THERE REALLY NO SOLUTION TO THAT PROBLEM???
(* the pins have nothing to do with the touchscreen, they are what holds aluminum shell on the plastic chasis)
i had an o2 mini with 1.11 rom and its touch screen was not quite sensitive.. had to tap or drag stylus very hard..
but after upgrading to 2.03TX.. to my surprise.. my PDA now has very good touch screen response!
hi, i have this problem
I tryed to re-flash rom or adjust metal pins but the problem persists.
Anyone have another solution?
Plese help me, i want to save my pupil
i have the same problem. the o2 is really a great little phone but i think im going to be forced to upgrade
i also got a unit mini xda from a friend, he said it is dropped and can't tap screen. i hold and press the screen, then slide up and down, side by side, and now its ok.
Trullalero said:
Anyone have another solution?
Click to expand...
Click to collapse
Probably it's problem with flat wire that connects screen with mainboard.
You need to open yours xda, find that wire, unplug it from mainboard, clean its pins with alcohol and plug into again.
From this time mine xda doesn't decalibrating anymore
khuan said:
i also got a unit mini xda from a friend, he said it is dropped and can't tap screen. i hold and press the screen, then slide up and down, side by side, and now its ok.
Click to expand...
Click to collapse
hi khuan thanks for the great tip.. you save my $$$!
I was just thinking to upgrade my mini since it response too slow when i tap the screen
but now it works just as it is new.
guys.. try khuan tip.. it really works!
khuan said:
i also got a unit mini xda from a friend, he said it is dropped and can't tap screen. i hold and press the screen, then slide up and down, side by side, and now its ok.
Click to expand...
Click to collapse
what exactly do you mean?
can you be more specific ?
Screen Setting
new_ppc_user said:
what exactly do you mean?
can you be more specific ?
Click to expand...
Click to collapse
Hi
My cell also had the same problem. There is a bunch of wires coming from the back of touch screen, these wires fix inside a socket. There is a black color cover that fix the wires inside that socket. During mishandling that cover got loose, that's why your cell loose the screen setting. I fixed that cover and now my Jam works perfectly. (Do it if you have the courage to open your cell)
Ali
Hello, I just bought a used O2 mini and had this same problems. I finally found a quick way to restore the calibration that goes out every restarts.
Using resco registry editor, I found the data stored here->
HKEY_LOCAL_MACHINE/HARDWARE/DEVICEMAP/TOUCH/CalibrationData
So I make 1 clean alignment and quickly went and export the Touch key into my Storage. Now every time the alignment goes haywire, I just import the data back. Hope it helps.