Located under the battery cover, some above the rubber battery lock, to the right of the battery itself.
Does anybody know the usage of it?
Have asked before about it and no answer.. not even from QTEK ..
Would realy like to know what it is ..
Carlis
Hi,
Push the button in.. and you will see that the Jam turns on.....
It it the cover open/close switch..
Cheers
So this means we can change the cover???
That would be great !
Since I have my S100 for 2 weeks and droped it :-(
it has a bump on its head now.
Happens everytime I buy something new, it needs to be damaged a bit, before I have luck with it :lol:
Thx.. for open my eyes.. I must say .. how the h*** could I miss that.. hehe... was so sure the springs on the sides was some shortcut thingie with the back cover so it felt it was on ..
Learning every day ..
Carlis
Hi,
The 2 metal spring are for the bluetooth antenna, because the GSM antenne is under the upper part of the device...
Cheers
any more detailed instructins of how to remove the front cover and the upper back cover ?
got a friend that does paintjobs, would be nice with a personalized Qtek S100 pics and more tips please !!
Related
hello !! i have a problem with my wizard! when someone calls me the screen is rotating for some seconds and then coming back. any ideas??? i tried with different roms but nothing! thank u in advance!
Is it due to the case you keep it in? I noticed that when i hold it close to the magnets of my case, the screen flips. probably because the device uses a magnet to tell when the keyboard is slid out in order to turn the orientation.
Does it happen when some one calls you wile your Qtek is in the bag?
Mine does and I think its because of the magnetic lock on the bag.
Try turning the device on and move the magnets over and around your device and you will see why... :wink:
thank's guys!!! it works! i don't know if theese magnets cause any other problems to the display buti have n mind ,1 month now, to buy a new case!!
thank's guys!!! it works! i don't know if theese magnets cause any other problems to the display buti have n mind ,1 month now, to buy a new case!!
thank's guys!!! it works! i don't know if theese magnets cause any other problems to the display buti have n mind ,1 month now, to buy a new case!!
Hi!
My uni's hinge got really loose and shaky and i was bloody frustrated all these days. Though i'd taken it apart so many times and tightened the hinge, it didnt make a difference....until today
I opened it up, pulled the side clip-ons out (the two pieces with the status LEDs for btooth & radio) and did this -
The bluetooth led piece goes around a metal pipe (the hinge rod) which usually gets loose and starts to slip. I wrapped a layer of cello-tape onto this hinge rod and slid the bluetooth led piece back on to the hinge rod. This time because of the cello-tape the piece goes f***in firm onto the hinge rod!!!
On the opposite side, i stuffed some toilet paper (!!!) into the piece to make it stiff as there isnt too much of the hinge rod on the other end (for the Radio led piece).
Reassembled the damn thing back, and now it feels like brand NEW!!!! Man, no clicking sounds, no rattling or shakes, no i'm-gonna-fall-apart-any-minute feeling!!!
After doing this, i feel like hanging on to my uni for some more time (a day ago i was so frustrated that i wanted to get rid of it!!)
Cheers!
San
If anybody wants pictures of how to do it, i can make an illustration....let me know if anything is unclear and u need help!
cheerio!
step by step instructions backed by pictures would be great! mine's starting to wobble to... this would be a great help!
PLEASE DO!!!!
PLEASE!!!!
Pretty PLEASE
COME ON....
where are the instructions and pictures? cant wait... hehe!
Hey!
I'll do it in te next couple days.
However, I think if you search for the HTC Universal's service manual, it has better instructions. You need to do the following -
1. Remove battery, sim, and remove 4 screws which are under the battery
2. Remove stylus, and start pulling the back side cover apart.
3. Disconnect antenna holder (the white plastic surrounding the camera (on the insides of the device)
4. Remove screws holding the motherboard, remove connectors coming from display unit and keyboard
5. Pull off the motherboard.
6. Take off the keyboard by removing all screws holding it.
7. Now, the two pieces (i talked of in my first post come off along with the display unit. Do what I told you in the first post and reassemble in the reverse order
8. It should be all fixed!
Again, for these steps download the service manual for step by step instructions with pictures. Also, all you need to take it apart is one screw driver with two bits! Its a philips screwdriver...get the specs from the service manual again!
Cheers!
San
Would be nice to get some pics of your "mod".
Any ideas on when you have time to put that up?
Thanks.
ey! still awaiting you're mod pics... hope you can put it up!
i realize this is old, but i'd like to see pics of this. my 9000 is a bit loose feeling.
yes please, post your pics, always is good to have aonther point of view of how to make it
yes please,pics please dreamtheater sir....
plz sir,i very urgently need your meyhod details for tightning the jasjar hinge as mine is getting too loose and shaky just like yours,u had said in your thread that u can provide pics as welll,plz iam constantly waiting for ur reply in that thread,,,bbut theres no update...
dear sirji,
pls update on the pict. need it urgently
It would be nice to saw what you made...
pl plzzzzzzzzzz plzzzzzzzzzzzzzzzzz sir i beg u plz upload pics,iam dying
Hi... can you plz post the pics of your modification. thanks in advance.
hello wizard lovers....iam currently using t-mobile vario just same as imate kjam.i love using this handset,but the one and only problem iam facing is the--LOOSE SLIDER PROBLEM.mine i 6-8 months old,but from last 5-10 days i had observed tht slider has got too loose,nd in the keyboard closed position the gap beetween the upper slider nd lower is also gone big.now here in india one technician tells me he can resolve it by tightening some screws after disassembling it,i just want to inquire from u guys tht is it reaaly possible or he is faking,coz i had searched some previous threads nd noone actually came to a final result,so plz help me nd if possible then add the solution in wizard wiki as well.t nks in advance
Tightening the screws will fix the loose slider issue. And you do have to remove the motherboard to get to the screws.
I had that issue.
look up the wizard service manual in Google or Prodigy service manual.
I took my phone apart.
I inspected it.
Saw the broken piece of plastic inside the phone that has a stop for the bevel on the stylus.
GLUED THAT PIECE WITH EPOXY
Took a foam earplug and cut it (after compressing it) to fit the gap between the stopper and the body of the phone. (to make a spring)
put he phone back together. no problems since march.
Wouldn't that be a fix if your stylus wouldn't stay in? I think mayur9890 is saying the phone is coming apart when he slides the keyboard out.
Definatly the cuase of a loose screw or broke part, its nessesary to take appart to gain access to the screws that hold the slider part together, its fairly simple procedure. Should only take 10 minutes (be carefull not to loose the screws there very small and fidgity)
You could probably do the repair yourself, using one of these manuals: http://forum.xda-developers.com/showthread.php?t=244446
Dear All,
I'm a NuB here and have a problem with my Battery Cover, As all knows, as we slide back the battery cover the phone goes off, and my problem: my phone is restarting even with a little tap on the cover. I wonder whether we could disable this matter or it is a mechanical process.
your help would be appreciated.
Any Ideas?
Any Ideas?
What the Newbie!!!
I think you have Magician (i-mate jam or....) phone cause the prophet phones doesn't have this option.
catzillaboy said:
I think you have Magician (i-mate jam or....) phone cause the prophet phones doesn't have this option.
Click to expand...
Click to collapse
Hey Pal, I know that I have Prophet Qtek S200 , and I handle this problem with a peice of paper betweeb battery and cover
What the!
majid.k said:
Hey Pal, I know that I have Prophet Qtek S200 , and I handle this problem with a peice of paper betweeb battery and cover
Click to expand...
Click to collapse
I have one , but it doeasn't have that ability !!!!
I mean I can take out the back cover without restarting or power off.
that's impossible guy!! but I think you have the battery problem,Coz I had same Prblm with my Diamond with fake battery or the old ones, you can change and test that piece!
Hi there,
Maybe someone can explain me, where is the hermes's slide indicator (or.. I don't the correct term, sorry for my bad English). My friend gave me his phone, after he was trying to change phone's cover to original htc tytn cover (of course, top part of the case did not fit on that hermes, but bottom case fit's ok). And after he assembled all parts - phone did not recognize when you are sliding the keyboard, and the screen is not turning to landscape position.
And now I want to fix it for myself, ant had tried to search where is that indicator, which 'sees' when you slide the phone. And when I disassembled - I just cant identify that thing. Only one place in my inexperienced eye is suspicious - http://img65.imageshack.us/img65/8708/dscf7321.jpg this place, in other side of LCD, where the hinges(?) is placed. But I can't understand, how its working (I have other HTC TYTN, but it's under warranty, so I cant dissasembly it to try use other parts, o smth..).
So, I would be grateful if someone could lead me to the right road' to fix this problem... if it's possible.
Thanks,
Laimis.
Yes your friend forgot to move the screen orientation magnet from the old case to the new one!! New cases do not have the magnet attached you have to move it from the old case.
See here:
Yes and you forgot to move the screen orientation magnet from the old case to the new one!!
See here:
http://forum.xda-developers.com/show...01&postcount=6
.... so let's hope he didn't throw away the old case!!
Dismantling Guides for Hermes / TyTn here www.mikechannon.net
Mike
Thank you, Mike!
you were right there is no magnet on the new case, so now I will wait until my friend will send me an old case.
God luck!
... good luck to you