Database Users

accessing LAN from PPC with activesync

Hallo,
I've searched for a long time in the forum and in Internet but I was not able to find how to access a shared folder on my :shock: LAN. It seems I have to use pass-through connections but I'm not able to make it work. Every time I use pocket file explorer to open a shared folder (writing the complete UNC) I receive the message "the network path was not found" and then "network resource cannot be found .....".
My LAN is a 192.168.1.X network and I've seen that IP assigned to the PPC is 192.168.55.101
Thank for every help.
Rudy

I'm not sure.
But have you tried localhost????
HTH
Stefan

I've tried from pocket file explorer both \\localhost and \\127.0.0.1 but I've received always the same messages.
rudy

Tryed Pocket LAN yet?

It works
I have been trying to do this for months and pocket Lan works perfectly

There is a freeware network utility, named vxUtil.
Maybe this tool help you to solve the problem.
Utilities include:
DNS Audit
DNS Lookup
Finger
Get HTML
Info
IP Subnet Calculator
Password Generator
Ping
Ping Sweep
Port Scanner
Quote
Time Service
Trace Route
Wake On LAN
Whois
vxUtil (Personal) operates on all Windows CE-based Handheld, Handheld Pro, Palm-size and Pocket PCs and requires Windows CE 2.0 (or later).
http://www.cam.com/vxutil_pers.html

I've truid both pocket lan and vxUtil with no results. I can't ping the laptop. I think I could never ping it if the network segment of PPC and laptop are different. Laptop ip now is 10.0.0.8 and PPC always 192.168.55.101. Perhaps I should enabled a proxy on the PPC to route the ping.
rudy

do you have a personal firewall installed on laptop? try to disable and check

I have no firewall installed or active.
I was successfull in accessing the LAN using the software "pocket LAN CE", but this is obvious thus it installs a server software that stays resident in the tray bar of the deskop PC.
There must be a solution to access the LAN using only active sync!

As far as I know that's not possible without a LAN card.
The passthrough which is available via activesync works only for internet connections.
I might be wrong. Keep looking. Have done it for a long time an gave it up.
If you find a solution feel free to share at this forum.
Success

How about LAN over Bluetooth?

LAN over bluetooth
And how do we accomplish this with the XDA II while the XDA II has no profile for LAN over bluetooth.
Please share the info you've.
Because this is interesting to me too!

For me too I'm also trying bluetooth over XDA but aint working yet

:?
I have installed bluetoothGPS.zip file (found in this forum) and then I installed the Bluesoleil Bluetooth Software for the PC (evaluation version). I could get an IP for the PPC and see the LAN but Internet wasn't working. Anyway having the two Bluetooth Stacks at the same time on the PPC is not a good alternative...
So please:
-MS give us some more Bluetooth Profiles, cm on, you can doit!
- Tobias and Pocket Bluetooth Tools: Please finish the LAN profile, I already donated you :wink:
Cheers

Make sure that a "guest" account is enable on your server, and try protocals other than tcp/ip. Ipx/Spx is fair. I suppose I should ask first if the activesinc laptop is able to browse the target folder? If it can, then try mapping the share as a network drive on the laptop, and see if you can nav to it using activesinc??? I'm a newbie, and don't even have my MDA I yet (in about 2 hours, I will). I will definantly be trying lots of unorthodox crap, so I'll let you know if I get it to work! Good luck.

Access network share via WiFi

I had a JasJar and before it PDA2k and with both I could not mount network shares on my local home network. I write the address in file explorer in the format \\10.0.0.23\share where the share share does not even have a password and is share to everybody and the phone can not recognize the share.
It does see other devices on the local netword for example it can browse the Internet and access my routers web based admin but not the share.
Other computers on my home network can access the share.\
I heard there are programs that help in doing this, but is there no direct or free way to do this?

Try using Resco File Explorer in which you will be able to map shared network folders and then you can access them from File Explorer directly, it even support possword protected shared items.

Im using the standard file explorer, it works fine. I start by typing \\P4 which eventually shows my shares, and then I can navigate as I want.
Cheers
Nasdaq

still can not connect to share
Nasdaq, which version of windows do do you have the share on. Are there any special settings?
It gives me "network path was not found" always then "Network resource can not be found or you do not have the permission to access the network".
The share has no password, on windows it just logs me in without any further input.
I am using the openpath in the file explorer.

May be you need to check once again about IP Addresses and Default Gateway settings, which is not allowing you to connect with your LAN.

--Universal can't connect to Windows Server 2003--
Cant map to a Windows 2003 Server share? Is it also a Domain Controller? Check the server for
start / programs / administraton tools / Domain Controller Security Policy
Then check Local Policies / Security Options :
Microsoft Network Server: Digitally sign communications (always)
change to disabled
that will stop your universal from accessing a share normal windows machines can access.,.

Access shares problem is on Windows XP
This problem is on WindowsXP share not on windows server.
Also the imate can access the Internet and even the administration of the router, so I gues it has full TCP/IP abililty.
Are there any workgroup settings that I need to do?

Sorry for not getting back earlier, my share is on an XP sp1 box.
What I would REALLY like to do is browse my Exec over wifi from my PC. :?
Cheers
Nasdaq

Anyone got any other advice on this one?
Can't access my network shares with //192.168.0.1/ etc either?
Thanks
M.

I can't access shares by using the IP, I have to use the name of the machine: \\azhad instead of \\10.168.2.158
Azhad

Hi Guys,
what is this sharing stuff u r talking about?
Please excuse me for this newbee question but i want to know about what sort of sharing etc can i do with my Exec and Laptop, like exploring files on laptop from Exec or other way around?
My laptop has Windows XP sp2 and i use wireless router to share my broadband
many thnx......
Jatt

Try this up
I had the same problem accessing network shares on my Universal...
I was also typing IP address in Resco Explorer and it was not working.
But I could make it work using the computer name. I have no idea why it work whil with basic ip address it couldn't, but at least I am able to browse my computer folder and play video files.
So try using "\\computername\share" to see if it's working.
forrest.

I tried
I tried doing that, using the computer name. It takes more time to tell me that it can not access the server.
I think that to resolve the name of the computer it needs a wins server, is that correct?
Could it also be in your network settings if you set your network as internet or connects to work?

to Jatt
Jatt theoretically you should be able to create a network share on any computer on your network and be able to access it on your phone. This is really handy since you would not need to activesync to exchange files.
But note that for JasJar/Exec or any WM5 device you can not sync over the network just share files.

To ehabh
Thanks for trying to help me out but can u tell me how do i create a network share on my computer? please
Thanks again

Same problem
I've got the same problem. I can connect to the internet through my router but for the life of me I can't connect to the shared on my PC (XP SP2). I know it's not a problem with my EXEC because I can connect to my PC at work. I can see my PC in the device list but not connect to it.
The first time I tried to connect using Resco Explorer 05 I managed to ge the screen asking for log-on details, but never got any further as it said my passwork was incorrect. Since then I've never managed to get the log-on screen back only an error say the network resource was unavailable.
I've ran the XP network set-up wizard more times than I can count, changed my PC settings manually but still had no luck. Has no one figured out what we're doing wrong?

I didn't really understand the machine name issue as I don't have any WINS or DNS server at home... But for me it worked...
Anyway you should try to temporarily disable your personnal firewall (On the computer you're trying to access) just to see if it is not blocking network traffic for the windows sharing.
If it is the problem, then you have to configure your firwall to stop blocking this traffic...
Sorry, but it's all I know...
Forrest.

HTC WM6 as member of Windows LAN workgroup via WIFI

I have a new AT&T Tilt and I've just installed a WIFI access point on my home/office LAN. My WIFI laptop was simple to configure as member of the Windows WORKGROUP. I've been struggling with my TILT. Some questions:
1) Is this supposed to work?
2) How do you assign the TILT to a workgroup?
3) I can see other workgroup PCs from the TILT, but I cannot see the TILT from other PCs. I am able to ping the TILT from a PC both by ip address and by device name (which happens to be "tilt").
Thanks for any help,

From what I understand you want to be able to browse phone files over wifi?

Yes. On any LAN PC, I would like to click on "My Network Places" and see the WM6-Phone listed with the other WORKGROUP computers. Then I would like to be to click on it to browse its directorys. And also drag & drop files to/from the phone. Thanks.

comet270 said:
Yes. On any LAN PC, I would like to click on "My Network Places" and see the WM6-Phone listed with the other WORKGROUP computers. Then I would like to be to click on it to browse its directorys. And also drag & drop files to/from the phone. Thanks.
Click to expand...
Click to collapse
Not sure that's going to work unless you can find some other way of connecting other than by using Activesync

I understand the "Not sure that's going to work..." part. I don't follow the "unless you can find some other way...". I'm not using Activesync (at the moment) I wish to use a WIFI Access Point to join a LAN WorkGroup. I call that "some other way". It would seem that this desire would be widely shared by the wider community of users. It's a logical thing to want to do. There are enough parameters to tweek that given the proper expertise, I would guess that you could connect anything to anything else. I just don't have the expertise so I thought I would pose the question...

As far as i know, windows mobile doesn't include a smb (file) server. You have only a client. This means that you can browse your desktops' shares from the phone but not the contrary.
Windows CE 5.0 and 6.0 actually have a smb server but i think this is not shipped with the Mobile variant.
Unless you find some 3rd party software of course (i don't know of any but i've never really looked for it).
Bye
EDIT: if you want to be able to share files in the PPC with the desktops in the network, you can install a FTP server in your PPC. Then you can use a ftp client on the desktop to browse the PPC.
Try this one: http://www.mochasoft.dk/freeware/ftpd.htm

Nice solution. Thank you.

Seeing LAN shares with Tilt
I have the same goal (to share both ways between Tilt and LAN), but some additional issues.Have had the Tilt for only one day, so forgive me for any dumb questions!.
Can't even see the LAN shares from the tilt (nor the other way around). The phone indicates it is connected to our WiFI, and other LAN PCs can see another's share \\Titan for eg., but when I type //Titan into the Tilt browser it says it can't connect to that. Any suggestions why?
I wondered if its a syntax problem. Seems the Tilt does not have a reverse slash (\), but I would think forward slash (/) should work equally well.
In some circumstances, the phone invites logging into a VPN, but we dont have one established on our LAN. Would this facilitate sharing files? Does setting one up require running a server or is a simple Peer to Peer network sufficient? If so, how do you set one up?
Once I am sure I hve a Wifi connection I will try the ftp client solution.
Any suggestions welcomed.
Thanks
Trekker451

Remote Desktop WM6 T-Mobile Wing help

I have been searching for clarity thru islands of info in the forums as well as the net. Any help directing me would be sweet. I am trying to use my T-Mobile Wing HTC WM6 to control a computer on my home network. I have somewhat knowledge of having the server and client. Have read and installed programs. I want to be at McDonalds *or any wifi spot and log in to home computer. When I have a VNC server running it says the network ip address of 192.168.1.101 but I assume thats because its thru my network. I have went to what is my ip address.com and tried that with the port the server allows in the vnc viewer and had no luck. I think I might be too newb for such an advanced concept. I am somewhat computer savvy to alot of technical terms. If anyone could help it would be greatly appreciated. I use messengers if faster communication is necessary. Thanks in advance to any help or thoughts.

homiedaclown said:
I have been searching for clarity thru islands of info in the forums as well as the net. Any help directing me would be sweet. I am trying to use my T-Mobile Wing HTC WM6 to control a computer on my home network. I have somewhat knowledge of having the server and client. Have read and installed programs. I want to be at McDonalds *or any wifi spot and log in to home computer. When I have a VNC server running it says the network ip address of 192.168.1.101 but I assume thats because its thru my network. I have went to what is my ip address.com and tried that with the port the server allows in the vnc viewer and had no luck. I think I might be too newb for such an advanced concept. I am somewhat computer savvy to alot of technical terms. If anyone could help it would be greatly appreciated. I use messengers if faster communication is necessary. Thanks in advance to any help or thoughts.
Click to expand...
Click to collapse
a few thoughts,
1. what version of windows are you running. (e.g Xp Home or vista )
as Vista home basic and premium will not accept a remote desktop connection without a 3rd party hack to make it work only business and ultimate support remote desktop
If on XP home be sure to set allowing of remote desktop sessions to be allowed under the system properties area.
2. do you have a password setup on the user account that you log into windows on if no remote desktop will not allow access.
3. when browsing from a 3rd party network ( e.g mcdonalds or over GPRS/HSDPA ) you browse to your external ip not the dark ip of 192.168.1.x i use dyndns.org so i can just browse to the dynamic domain ip which is my external ip of my home pc
4. since you mentioned a dark ip i can only also assume your using a router at home. this means you either use such as LogmeIn/Hamachi and browse to the home pc's Hamachi IP ( e.g 5.5.100.50 ) or you will have to set a port forward in your router to forward any requests from port 3389 to the local IP of the home pc, ( e.g 192.168.1.100 )
I use static ip's in my router at home to ensire that the port forward will always goto my home pc's internal ip address. My particular router from netgear allows to have the ip of a specific machine be assigned the same ip internally based on it's ethernet adapter MAC address. making no changes required on the pc itself other them standard DHCP.
hope this helps.

1. what version of windows are you running. (e.g Xp Home or vista )
as Vista home basic and premium will not accept a remote desktop connection without a 3rd party hack to make it work only business and ultimate support remote desktop
If on XP home be sure to set allowing of remote desktop sessions to be allowed under the system properties area.
1. I am using Windows XP Home. I have allowed Remote Access under the tab Systems Tab.
2. I only have a pw on the prog VNC server on the pc but no passwords for windows *should I? :| ... Then I try VNC Viewer the the Pocket PC *T-mobile Wing.
3. I am reading up on the dyndns.org site. I assume I need the free dns service for those with dynamic IP addresses. *i hope I have that.
4. I have Linksys Bef11s4... I believe I can set static ip's though its tricky for me. I am going to try for the pc I want to connect to. This networking stuff gets a little bit blurry for me. I understand that static means non-changing, therefore the pc to connect to in network will have same ip on restarts and things. I am familiar with the port forwarding options *do i need tcp and udp checked?... again any thoughts definately appreciated...
lastly, Do you have any particular progs you recommend for me to do this concept? I have a few installed, but not sure i need all.. I have pocketputty on pda and wm6 rdc... plus vncvier. On the PC i have VNC CLient and VNC Server *believe I only need server. Thank you for your time Cyberjak

1. Just go to http://www.logmein.com
2. Sign up. It's free.
3. Screw Remote Desktop and juggling internal vs. external IP addresses and DNS.
4. Use/enjoy...no work needed.
MJB

Logmein has like 6 choices... I am looking to remote access outside my network... also is this free? I see trials and stuff... thanks for help mjb

have the logme in installed on main and when i use pda it doesnt work...i installed cab and log in fine but when i go to remote the pc it takes my access code and then pops up with error message for menuPDA.html... i cleared history and cookies and tried to make sense of the forums... I am using the T-mobile Wing with WM6.... wierd... willing to try the other way if needed... i guess i could also try loggin thru a pc not home to the remote pc... i believe i saying this remote term correctly but i believe u understand. I am trying to use my PDA anywhere to control home pc.... thanks for help guys... i am willing to try whatever way works...

I've used Logmein on my MDA Pro, Ameo and now on my Vario 3.
You should first try to remote your PC while your sitting next to it. That way you can see any firewall pop ups that may be blocking you.

I have been trying when i am right next to it... I am using my WM6 to connect wi-fi to the internet thru my network.... the pc i wanna control is on my network...

It doesn't matter what network the PDA and PC are on. Logmein uses an internet connection.

yeah, tried a bunch of things to get logmein to work, and it always comes to the page of "403 Forbidden (0x5) menuPDA.html System error: Access is denied. (5)"
checked their forrums too...
guessing i should try going back to client/server manual entry... either way, any advice from you guys much appreciated.... It seems WM6 are known for incompatibility issues with RDC situations.... hoping not the case but...thanks again guys

got logmein working nicely, thank you for the help guys...

Gooer Remote Desktop Service
I am using Gooer Remote Desktop Service(http://www.gooer.com) and it let me access my home PC using laptop or mobile phone.

remote desktop only works, as far as I know, on XP pro & Vista
http://forum.xda-developers.com/showthread.php?t=357009

DNS troubleshooting

I'm having trouble looking up DNS records on my TyTN (WM6.0). I use Cambridge VxUtil to ping my desktop PC ("tinygod" -- 2 points for getting the reference), and it says it can't find the host. I tried running Pocket Hosts and adding a record, but it doesn't help.
If it matters, I *can* ping the PC by IP, and I can FTP from the PC into Mocha FTP Server on the phone.
I think this is the reason why I can't browse to a network share in File Explorer, which is the problem I'm actually trying to solve. Can anybody offer some tips?