Database Users

accessing LAN from PPC with activesync

Hallo,
I've searched for a long time in the forum and in Internet but I was not able to find how to access a shared folder on my :shock: LAN. It seems I have to use pass-through connections but I'm not able to make it work. Every time I use pocket file explorer to open a shared folder (writing the complete UNC) I receive the message "the network path was not found" and then "network resource cannot be found .....".
My LAN is a 192.168.1.X network and I've seen that IP assigned to the PPC is 192.168.55.101
Thank for every help.
Rudy

I'm not sure.
But have you tried localhost????
HTH
Stefan

I've tried from pocket file explorer both \\localhost and \\127.0.0.1 but I've received always the same messages.
rudy

Tryed Pocket LAN yet?

It works
I have been trying to do this for months and pocket Lan works perfectly

There is a freeware network utility, named vxUtil.
Maybe this tool help you to solve the problem.
Utilities include:
DNS Audit
DNS Lookup
Finger
Get HTML
Info
IP Subnet Calculator
Password Generator
Ping
Ping Sweep
Port Scanner
Quote
Time Service
Trace Route
Wake On LAN
Whois
vxUtil (Personal) operates on all Windows CE-based Handheld, Handheld Pro, Palm-size and Pocket PCs and requires Windows CE 2.0 (or later).
http://www.cam.com/vxutil_pers.html

I've truid both pocket lan and vxUtil with no results. I can't ping the laptop. I think I could never ping it if the network segment of PPC and laptop are different. Laptop ip now is 10.0.0.8 and PPC always 192.168.55.101. Perhaps I should enabled a proxy on the PPC to route the ping.
rudy

do you have a personal firewall installed on laptop? try to disable and check

I have no firewall installed or active.
I was successfull in accessing the LAN using the software "pocket LAN CE", but this is obvious thus it installs a server software that stays resident in the tray bar of the deskop PC.
There must be a solution to access the LAN using only active sync!

As far as I know that's not possible without a LAN card.
The passthrough which is available via activesync works only for internet connections.
I might be wrong. Keep looking. Have done it for a long time an gave it up.
If you find a solution feel free to share at this forum.
Success

How about LAN over Bluetooth?

LAN over bluetooth
And how do we accomplish this with the XDA II while the XDA II has no profile for LAN over bluetooth.
Please share the info you've.
Because this is interesting to me too!

For me too I'm also trying bluetooth over XDA but aint working yet

:?
I have installed bluetoothGPS.zip file (found in this forum) and then I installed the Bluesoleil Bluetooth Software for the PC (evaluation version). I could get an IP for the PPC and see the LAN but Internet wasn't working. Anyway having the two Bluetooth Stacks at the same time on the PPC is not a good alternative...
So please:
-MS give us some more Bluetooth Profiles, cm on, you can doit!
- Tobias and Pocket Bluetooth Tools: Please finish the LAN profile, I already donated you :wink:
Cheers

Make sure that a "guest" account is enable on your server, and try protocals other than tcp/ip. Ipx/Spx is fair. I suppose I should ask first if the activesinc laptop is able to browse the target folder? If it can, then try mapping the share as a network drive on the laptop, and see if you can nav to it using activesinc??? I'm a newbie, and don't even have my MDA I yet (in about 2 hours, I will). I will definantly be trying lots of unorthodox crap, so I'll let you know if I get it to work! Good luck.

Access network share via WiFi

I had a JasJar and before it PDA2k and with both I could not mount network shares on my local home network. I write the address in file explorer in the format \\10.0.0.23\share where the share share does not even have a password and is share to everybody and the phone can not recognize the share.
It does see other devices on the local netword for example it can browse the Internet and access my routers web based admin but not the share.
Other computers on my home network can access the share.\
I heard there are programs that help in doing this, but is there no direct or free way to do this?

Try using Resco File Explorer in which you will be able to map shared network folders and then you can access them from File Explorer directly, it even support possword protected shared items.

Im using the standard file explorer, it works fine. I start by typing \\P4 which eventually shows my shares, and then I can navigate as I want.
Cheers
Nasdaq

still can not connect to share
Nasdaq, which version of windows do do you have the share on. Are there any special settings?
It gives me "network path was not found" always then "Network resource can not be found or you do not have the permission to access the network".
The share has no password, on windows it just logs me in without any further input.
I am using the openpath in the file explorer.

May be you need to check once again about IP Addresses and Default Gateway settings, which is not allowing you to connect with your LAN.

--Universal can't connect to Windows Server 2003--
Cant map to a Windows 2003 Server share? Is it also a Domain Controller? Check the server for
start / programs / administraton tools / Domain Controller Security Policy
Then check Local Policies / Security Options :
Microsoft Network Server: Digitally sign communications (always)
change to disabled
that will stop your universal from accessing a share normal windows machines can access.,.

Access shares problem is on Windows XP
This problem is on WindowsXP share not on windows server.
Also the imate can access the Internet and even the administration of the router, so I gues it has full TCP/IP abililty.
Are there any workgroup settings that I need to do?

Sorry for not getting back earlier, my share is on an XP sp1 box.
What I would REALLY like to do is browse my Exec over wifi from my PC. :?
Cheers
Nasdaq

Anyone got any other advice on this one?
Can't access my network shares with //192.168.0.1/ etc either?
Thanks
M.

I can't access shares by using the IP, I have to use the name of the machine: \\azhad instead of \\10.168.2.158
Azhad

Hi Guys,
what is this sharing stuff u r talking about?
Please excuse me for this newbee question but i want to know about what sort of sharing etc can i do with my Exec and Laptop, like exploring files on laptop from Exec or other way around?
My laptop has Windows XP sp2 and i use wireless router to share my broadband
many thnx......
Jatt

Try this up
I had the same problem accessing network shares on my Universal...
I was also typing IP address in Resco Explorer and it was not working.
But I could make it work using the computer name. I have no idea why it work whil with basic ip address it couldn't, but at least I am able to browse my computer folder and play video files.
So try using "\\computername\share" to see if it's working.
forrest.

I tried
I tried doing that, using the computer name. It takes more time to tell me that it can not access the server.
I think that to resolve the name of the computer it needs a wins server, is that correct?
Could it also be in your network settings if you set your network as internet or connects to work?

to Jatt
Jatt theoretically you should be able to create a network share on any computer on your network and be able to access it on your phone. This is really handy since you would not need to activesync to exchange files.
But note that for JasJar/Exec or any WM5 device you can not sync over the network just share files.

To ehabh
Thanks for trying to help me out but can u tell me how do i create a network share on my computer? please
Thanks again

Same problem
I've got the same problem. I can connect to the internet through my router but for the life of me I can't connect to the shared on my PC (XP SP2). I know it's not a problem with my EXEC because I can connect to my PC at work. I can see my PC in the device list but not connect to it.
The first time I tried to connect using Resco Explorer 05 I managed to ge the screen asking for log-on details, but never got any further as it said my passwork was incorrect. Since then I've never managed to get the log-on screen back only an error say the network resource was unavailable.
I've ran the XP network set-up wizard more times than I can count, changed my PC settings manually but still had no luck. Has no one figured out what we're doing wrong?

I didn't really understand the machine name issue as I don't have any WINS or DNS server at home... But for me it worked...
Anyway you should try to temporarily disable your personnal firewall (On the computer you're trying to access) just to see if it is not blocking network traffic for the windows sharing.
If it is the problem, then you have to configure your firwall to stop blocking this traffic...
Sorry, but it's all I know...
Forrest.

networking, pinging and remote desktop? can u help?

hello all,
gots me a problem . im going to japan november, want to remote desktop back to here when necessary and be able to access a hdd here for dumping pictures. i have a lan here, wifi, it has a connection surfs the net etc.
it has an ip address from my router. is there a program or command that will get me the kind of command functionality of a dos/command prompt? ping, ipconfig, etc?
then if i can get them to talk, what steps do i need to take to remote in. do i need software? i enabled remote here, setup a user (vista BTW).
i cant access here from the laptop with xp either that one can ping. its also wifi currently. im obviously missing something and would appreciate any help, or web site links etc to show me what ive missed.
thanks in advance.

hi, a lot of admin utilities is in program called vxUtil. try to find it, if you are interrested. this is list of few features -
DNS Audit
DNS Lookup
Finger
Get HTML
Info
IP Subnet Calculator
Password Generator
Ping
Ping Sweep
Port Scanner
Quote
Time Service
Trace Route
Wake On LAN - magic packet
Whois
or look at HERE
so this was for PDA, and this is for full connection via SSH VPN encrypted connection. I work for Infineon/Qimonda company, and there is strict security policy in here. So we have not permitted to ping, or created FTP connection with outside and many other services (like sending files through ICQ and etc.). There is one way, use your own SSH tunell ;-) on my home PC I have installed WinSSHD Bitvise server liseninng on port 443 (which cannot be blocked, because all our lotus notes databases is secured with HTPPS) and from work I can connect easily to home. Then is easy to create FTP connection, or terminal, or full GUI terminal (mstsc.exe e.g.) Link to this server (not free) and also to very good client (free) is HERE
I also have few routers connected to stable IP´s adress, which also have VPN features. Then is easy for me to connect to my home lan from everywhere.

thanks so much, i knew someone would point me the right way.
since last post, i have managed to remote desktop from my phone on the LAN just using built in remote desktop. tomorrow i will attempt an internet connection probably not configured something yet!
im checking out those web pages now. thanks again

Accessing computer through Wifi

I wanted to find out if anyone knew of any programs that could be installed on an AT&T 8525 (HTC Hermes) that would allow me to move my cursor, access files, delete files, etc. from my computer over wifi.
Thanks!

https://secure.logmein.com/welcome/get_logmein_free/signup.asp
Mike

I didn't know logmein could be installed on a mobile device. If it can, could you please explain how, please.

Logmein free and pro have a very good win mobile version. (Pro or Pocket pc version only)
just got to the log me in site as per normal try to connect to your pc and itll ask if you want to download and install the cab
works well
Jeremy

i just use plain ol' VNC
google pocketpc vnc viewer, it works well.
run VNC host on your computer, forward the ports you need with your router and learn your IP, or get a dynamic IP routing service and set it up to work with your router..
+its free, and understood by everyone.

I use RealVNC on the desktop (free version, no file transfer) and MochaVNC on my 8525. Worked great!
Stop by DYNDNS.org to get a named dns, works even if your modem shuts down for a while and the old IP goes back into the pool. (It's free too)
Configure the router for RealVNC (port 5900) and also configure the router to use dynDNS (it's easy to do with linksys routers)

Maybe not exactly what you're looking for but I manage those tasks with RESCO EXPLORER - you will see your desktop under NETWORK just like you would use your desktop for MY NETWORK PLACES. It is easy to move, copy or delete (shared) files ...

Connect from PC to PPC over wi-fi

Hello,
I'd like to be able to connect from my PC to my PPC using wi-fi, nit USB/ActiveSync. This is part of an effort to establish connection between all networked computers - one PC and two PPC, including the possibility to connect from one PPC to the other. I am not sure how much of this is possible, and will appreciate advice.
Currently I have:
DHCP enabled wi-fi router and assigned static IPs to both PPCs, e.g. 192.168.2.100. I try to access this via FileZilla by typing the IP or the host name (WM_Cheeseus). I never get beyond:
"Connection established, waiting for welcome message...
Error: Could not connect to server".
I can ping the device, but I cannot see it from Windows Explorer's Network Places (only see other PCs, not the PPCs).
From the device, I can ping the PC (192.168.2.102) but I get "request timed out" when trying to ping the second device, 192.168.2.109.
I think I am looking for the WM version of "sharing" my PPC's folders on the network.
So, what settings should I be looking for? Thanks!

don't think ppc support smb server role
you can put a ftp on it and do it that way

Rudegar said:
don't think ppc support smb server role
you can put a ftp on it and do it that way
Click to expand...
Click to collapse
Um... what do you mean by "put a ftp on it"? Will Total Commander's FTP/LAN plugins do or do I need something else? I have tried to connect to the other PPC via TCMD's LAN plugin but I can't.

no total commander got a ftp client not a server
http://www.google.dk/search?source=...le-søgning&meta=lr=&aq=f&oq=pocketpc+ftp+serv
here are some

Thank you!
Mocha FTP did the job - as far as connecting to the PPC from the PC. Unfortunately, it is still not possible to connect between the two PPCs by starting Mocha FTP on one and typing its IP into the other one's browser.