Accessing computer through Wifi - 8525, TyTN, MDA Vario II, JasJam General

I wanted to find out if anyone knew of any programs that could be installed on an AT&T 8525 (HTC Hermes) that would allow me to move my cursor, access files, delete files, etc. from my computer over wifi.
Thanks!

https://secure.logmein.com/welcome/get_logmein_free/signup.asp
Mike

I didn't know logmein could be installed on a mobile device. If it can, could you please explain how, please.

Logmein free and pro have a very good win mobile version. (Pro or Pocket pc version only)
just got to the log me in site as per normal try to connect to your pc and itll ask if you want to download and install the cab
works well
Jeremy

i just use plain ol' VNC
google pocketpc vnc viewer, it works well.
run VNC host on your computer, forward the ports you need with your router and learn your IP, or get a dynamic IP routing service and set it up to work with your router..
+its free, and understood by everyone.

I use RealVNC on the desktop (free version, no file transfer) and MochaVNC on my 8525. Worked great!
Stop by DYNDNS.org to get a named dns, works even if your modem shuts down for a while and the old IP goes back into the pool. (It's free too)
Configure the router for RealVNC (port 5900) and also configure the router to use dynDNS (it's easy to do with linksys routers)

Maybe not exactly what you're looking for but I manage those tasks with RESCO EXPLORER - you will see your desktop under NETWORK just like you would use your desktop for MY NETWORK PLACES. It is easy to move, copy or delete (shared) files ...

Related

accessing LAN from PPC with activesync

Hallo,
I've searched for a long time in the forum and in Internet but I was not able to find how to access a shared folder on my :shock: LAN. It seems I have to use pass-through connections but I'm not able to make it work. Every time I use pocket file explorer to open a shared folder (writing the complete UNC) I receive the message "the network path was not found" and then "network resource cannot be found .....".
My LAN is a 192.168.1.X network and I've seen that IP assigned to the PPC is 192.168.55.101
Thank for every help.
Rudy
I'm not sure.
But have you tried localhost????
HTH
Stefan
I've tried from pocket file explorer both \\localhost and \\127.0.0.1 but I've received always the same messages.
rudy
Tryed Pocket LAN yet?
It works
I have been trying to do this for months and pocket Lan works perfectly
There is a freeware network utility, named vxUtil.
Maybe this tool help you to solve the problem.
Utilities include:
DNS Audit
DNS Lookup
Finger
Get HTML
Info
IP Subnet Calculator
Password Generator
Ping
Ping Sweep
Port Scanner
Quote
Time Service
Trace Route
Wake On LAN
Whois
vxUtil (Personal) operates on all Windows CE-based Handheld, Handheld Pro, Palm-size and Pocket PCs and requires Windows CE 2.0 (or later).
http://www.cam.com/vxutil_pers.html
I've truid both pocket lan and vxUtil with no results. I can't ping the laptop. I think I could never ping it if the network segment of PPC and laptop are different. Laptop ip now is 10.0.0.8 and PPC always 192.168.55.101. Perhaps I should enabled a proxy on the PPC to route the ping.
rudy
do you have a personal firewall installed on laptop? try to disable and check
I have no firewall installed or active.
I was successfull in accessing the LAN using the software "pocket LAN CE", but this is obvious thus it installs a server software that stays resident in the tray bar of the deskop PC.
There must be a solution to access the LAN using only active sync!
As far as I know that's not possible without a LAN card.
The passthrough which is available via activesync works only for internet connections.
I might be wrong. Keep looking. Have done it for a long time an gave it up.
If you find a solution feel free to share at this forum.
Success
How about LAN over Bluetooth?
LAN over bluetooth
And how do we accomplish this with the XDA II while the XDA II has no profile for LAN over bluetooth.
Please share the info you've.
Because this is interesting to me too!
For me too I'm also trying bluetooth over XDA but aint working yet
:?
I have installed bluetoothGPS.zip file (found in this forum) and then I installed the Bluesoleil Bluetooth Software for the PC (evaluation version). I could get an IP for the PPC and see the LAN but Internet wasn't working. Anyway having the two Bluetooth Stacks at the same time on the PPC is not a good alternative...
So please:
-MS give us some more Bluetooth Profiles, cm on, you can doit!
- Tobias and Pocket Bluetooth Tools: Please finish the LAN profile, I already donated you :wink:
Cheers
Make sure that a "guest" account is enable on your server, and try protocals other than tcp/ip. Ipx/Spx is fair. I suppose I should ask first if the activesinc laptop is able to browse the target folder? If it can, then try mapping the share as a network drive on the laptop, and see if you can nav to it using activesinc??? I'm a newbie, and don't even have my MDA I yet (in about 2 hours, I will). I will definantly be trying lots of unorthodox crap, so I'll let you know if I get it to work! Good luck.

vpn compatible apps

the remote desktop client on my vario ii connects to my work desktop perfectly using our office vpn but it is rubbish! the screen doesn't scale well at all or provide any kind of zoom out function.
I have a vnc client which performs much better but it won't connect over the vpn it only works when connected directly to the office network.
forwarding ports is out of the question. so my question is this.
is there a vnc client for pocket pc which will work over vpn or is there a way to make the remote desktop client less rubbish
also are there any apps out there that will let me browse my work network over the vpn. resco doesn't seem to be able to do it even the ftp client won't work.
am I missing something about vpn connections as it seems the only two apps that work over one are activesync and the remote desktop client.
Did you tried to acces domain controler throught the VPN? If yes it is normal that it doesn't work; Domain controler require security enhancement in auth that pocket devices cannot deliver yet. The only way I know is to reduce the security enhancement by using the GPO on the concerned servers; but this is far of being a clean fix.
Just trying to use connect to a vnc server on my workstation. btw our domain controller is the exchange server and active sync works fine
Active sync & exchange do not use the integrate authentification & kerberos; it uses a plain text auth (crypted with the SSL certs), that's why it works. Even if you are on the LAN you will not be able to access your domain's controller shares because of security enhancement.
This is far from solving your issue; but I just wanted to make it clear. Concerning your issue I can't help you at the moment, I still didnt tried the VPN & advanced networking.
btw, good luck
I have set up a vpn on my home computer, no domain, and can't access shares or a vnc server on that either.
Hi Stemill, I seen your other post about the vpn issues with Resco also, I have heard in the past about vpn issues using the [email protected], are you using [email protected] or [email protected]?
I use the terminal/remote client on a daily basis, and it does blow, vj on the board here has made an app that allows fullscreen with the terminal client, and theres a Mocha remote desktop client that supports scaling but no fullscreen, both of which have their own quirks. The scaling makes the text impossible to read when its even at 25%
I have been working on connecting to the remote desktop on mac with vnc, and I've gotten as far as an error on authentification, so I know its possible outside of a home network, but I don't have a clue about buisness situations..exchange or vpn's.
I not even 100% positive about the wap issue, I just seem to remember reading something about it in the past.
Sorry I wasn't of much help, also I kind of have a question for you, I see you mention activesync, you're not activesyncing over an internet connection are you?, I'm working on installing apps that I don't have a .cab for over an internet connection, but the best route I had figured out was to install to a ftp share and then grab the .cab from there with Resco.
Best of luck to you.
Hi there.
I'm on t-mob in the uk. They have a 3g network with full internet access so i'm not using wap at all.
Thanks for the tips about the remote client tweaks. Do you have a link?
I'm using activesync to connect to my works exchange server to sync email and calendar. Pretty sure its not possible to sync over the air to a pc without using exchange. You certainly won't be able to grab remote files via activesync.
If we could figure out how to get apps to work over vpn you could set one up on your pc and (theoretically at least) browse its contents using resco without having to bother with ftp.
If it's not possible to get stuff working over the vpn then you've probably found the best solution already. use ftp or setup a webserver on your pc and host the cab files on that. pocket ie seems to let you install cab files directly from a link.
btw which vnc client are you using on your phone?
Hi, I forget a lot of the time that people here have so many different carriers, sorry.
Here's the link to vj's terminal addon app
http://www.vijay555.com/?Releases:VJFullscreenTSC
And here's the link to the Mocha remote client app
http://www.mochasoft.dk/rd.htm
I used .Net vnc when I was able to get the authentification error
http://www.freewareppc.com/docs/netvncviewer.shtml
I think my problem on the authentification was with the apple remote desktop itself, I read about somethin in the authentification being non standard and sometimes the free vnc viewers don't work..but that was also pc to pc related, the same makers of the Mocha remote desktop also make a vnc client..that was gonna be my next try, I just haven't gotten there yet.
I inistally set up my pc to be able to remote to it from my phone and access aol chatrooms..well mainly one I have hung out in for years, then realized if I set up a server, I could install apps that I couldn't find in .cab form over the net with it, I used to have windows server 2003 set up with IIS(webserver) and the streaming media services, I'm wondering now if the windows streaming media really works with the pocket windows media, and if I could even use it with my gprs/edge connection, I'm still waiting on 3G, suprisingly the remote desktop isn't too bad on gprs/edge.
I'm currently waiting to get a new hard drive before I can really get to work, I'm testing on an old messed up xp install, and half the time I can't even access "my computer" or open folders without it crashin explorer.

Remote Desktop WM6 T-Mobile Wing help

I have been searching for clarity thru islands of info in the forums as well as the net. Any help directing me would be sweet. I am trying to use my T-Mobile Wing HTC WM6 to control a computer on my home network. I have somewhat knowledge of having the server and client. Have read and installed programs. I want to be at McDonalds *or any wifi spot and log in to home computer. When I have a VNC server running it says the network ip address of 192.168.1.101 but I assume thats because its thru my network. I have went to what is my ip address.com and tried that with the port the server allows in the vnc viewer and had no luck. I think I might be too newb for such an advanced concept. I am somewhat computer savvy to alot of technical terms. If anyone could help it would be greatly appreciated. I use messengers if faster communication is necessary. Thanks in advance to any help or thoughts.
homiedaclown said:
I have been searching for clarity thru islands of info in the forums as well as the net. Any help directing me would be sweet. I am trying to use my T-Mobile Wing HTC WM6 to control a computer on my home network. I have somewhat knowledge of having the server and client. Have read and installed programs. I want to be at McDonalds *or any wifi spot and log in to home computer. When I have a VNC server running it says the network ip address of 192.168.1.101 but I assume thats because its thru my network. I have went to what is my ip address.com and tried that with the port the server allows in the vnc viewer and had no luck. I think I might be too newb for such an advanced concept. I am somewhat computer savvy to alot of technical terms. If anyone could help it would be greatly appreciated. I use messengers if faster communication is necessary. Thanks in advance to any help or thoughts.
Click to expand...
Click to collapse
a few thoughts,
1. what version of windows are you running. (e.g Xp Home or vista )
as Vista home basic and premium will not accept a remote desktop connection without a 3rd party hack to make it work only business and ultimate support remote desktop
If on XP home be sure to set allowing of remote desktop sessions to be allowed under the system properties area.
2. do you have a password setup on the user account that you log into windows on if no remote desktop will not allow access.
3. when browsing from a 3rd party network ( e.g mcdonalds or over GPRS/HSDPA ) you browse to your external ip not the dark ip of 192.168.1.x i use dyndns.org so i can just browse to the dynamic domain ip which is my external ip of my home pc
4. since you mentioned a dark ip i can only also assume your using a router at home. this means you either use such as LogmeIn/Hamachi and browse to the home pc's Hamachi IP ( e.g 5.5.100.50 ) or you will have to set a port forward in your router to forward any requests from port 3389 to the local IP of the home pc, ( e.g 192.168.1.100 )
I use static ip's in my router at home to ensire that the port forward will always goto my home pc's internal ip address. My particular router from netgear allows to have the ip of a specific machine be assigned the same ip internally based on it's ethernet adapter MAC address. making no changes required on the pc itself other them standard DHCP.
hope this helps.
1. what version of windows are you running. (e.g Xp Home or vista )
as Vista home basic and premium will not accept a remote desktop connection without a 3rd party hack to make it work only business and ultimate support remote desktop
If on XP home be sure to set allowing of remote desktop sessions to be allowed under the system properties area.
1. I am using Windows XP Home. I have allowed Remote Access under the tab Systems Tab.
2. I only have a pw on the prog VNC server on the pc but no passwords for windows *should I? :| ... Then I try VNC Viewer the the Pocket PC *T-mobile Wing.
3. I am reading up on the dyndns.org site. I assume I need the free dns service for those with dynamic IP addresses. *i hope I have that.
4. I have Linksys Bef11s4... I believe I can set static ip's though its tricky for me. I am going to try for the pc I want to connect to. This networking stuff gets a little bit blurry for me. I understand that static means non-changing, therefore the pc to connect to in network will have same ip on restarts and things. I am familiar with the port forwarding options *do i need tcp and udp checked?... again any thoughts definately appreciated...
lastly, Do you have any particular progs you recommend for me to do this concept? I have a few installed, but not sure i need all.. I have pocketputty on pda and wm6 rdc... plus vncvier. On the PC i have VNC CLient and VNC Server *believe I only need server. Thank you for your time Cyberjak
1. Just go to http://www.logmein.com
2. Sign up. It's free.
3. Screw Remote Desktop and juggling internal vs. external IP addresses and DNS.
4. Use/enjoy...no work needed.
MJB
Logmein has like 6 choices... I am looking to remote access outside my network... also is this free? I see trials and stuff... thanks for help mjb
have the logme in installed on main and when i use pda it doesnt work...i installed cab and log in fine but when i go to remote the pc it takes my access code and then pops up with error message for menuPDA.html... i cleared history and cookies and tried to make sense of the forums... I am using the T-mobile Wing with WM6.... wierd... willing to try the other way if needed... i guess i could also try loggin thru a pc not home to the remote pc... i believe i saying this remote term correctly but i believe u understand. I am trying to use my PDA anywhere to control home pc.... thanks for help guys... i am willing to try whatever way works...
I've used Logmein on my MDA Pro, Ameo and now on my Vario 3.
You should first try to remote your PC while your sitting next to it. That way you can see any firewall pop ups that may be blocking you.
I have been trying when i am right next to it... I am using my WM6 to connect wi-fi to the internet thru my network.... the pc i wanna control is on my network...
It doesn't matter what network the PDA and PC are on. Logmein uses an internet connection.
yeah, tried a bunch of things to get logmein to work, and it always comes to the page of "403 Forbidden (0x5) menuPDA.html System error: Access is denied. (5)"
checked their forrums too...
guessing i should try going back to client/server manual entry... either way, any advice from you guys much appreciated.... It seems WM6 are known for incompatibility issues with RDC situations.... hoping not the case but...thanks again guys
got logmein working nicely, thank you for the help guys...
Gooer Remote Desktop Service
I am using Gooer Remote Desktop Service(http://www.gooer.com) and it let me access my home PC using laptop or mobile phone.
remote desktop only works, as far as I know, on XP pro & Vista
http://forum.xda-developers.com/showthread.php?t=357009

Remote desktop control with Diamond 2

Hi Guys,
After wasting a complete day on all of the different vnc and rdp programmes, trying to control my desktop computer THROUGH the internet WITH my pocket pc (HTC Diamond 2) I thought i'd just ask:
I won't get it to work, and I can't help but think that it's just a lame little thing I've forgotten. Nothing will connect. Logmein and other server services show me nothing. Logmein in particular only shows me a white screen when I try to login to my computer, nothing else...reloading the page doesn't help. The external desktop controller that came with my phone won't connect, due to reasons (the computer is not on for instance) I'm sure are not true.
I have a HTC diamond 2 pocket pc running WM6.1 and network compact frame (latest update) installed (3.5 I think it was.)
My computer runs vista 32bits and I've tried numerous servers and clients but nothing seems to work...
Just a few hours ago I though it might be the fact that my ip ain't static. So I've made a static IP using the portforward.com description for my thomson speedtouch 780 router modem. Tried everything again. nothing...
the only thing I can think of is that my proxy is screwing up all my attempts to connect my two most precious devices through the internet...but shouldn't logmein have passed those settings? (i remember pressing the "don't block" button when windows firewall asked me)
Top of that I've googled my *ss of searching for different kinds of clients, software, programmes and others, usualy being redirected to this forum. I even tried the bible thread about networking and everything, though my mind refused to read the whole thing extremely thoroughly...
To make my request and question very clear:
I want a program that can remotely access my desktop pc through my diamond 2 ppc, mainly for accesing and downloading files and folders I might need for school. Ofcourse full control for audio (so I can start music from my living room) would be nice, but it's not mandatory...
I'm running wm6.1 and have jbed installed on my ppc, and running windows vista 32bits on my desktop computer. I have a static IP and a port setup through my router modem on port 1986.
I've been searching for almost 20 hours with 1 lunchbreak in between....can anyone help me to an easy solution (including a step to step guide)?
thx in advance...
oh yeah, I think i've enabled the "Let other users control my pc" button in the external dekstop control options for vista, but most of the guides and FAQ's say there's another button. -one saying "let other people help me solve issues with my computer by controlling my desktop"
-one saying "let other people connect to my computer, doing whatever the hell they want" (not the actual sentence btw )
vista only shows me the first one, and I have it checked.....
Noone knows anything about this?
I'm also trying to look for a rdp server for vista, but for now it seems non-existent...tried ultravnc, and allthough it works when my diamond2 is connected through USB, as soon as I disconnect my ppc from the PC, it freezes. I did a reboot and tried without usb connected.....nothing....couldnt connect.
the only vnc viewer working on my ppc right now is the one from mocha or mochia.....but it's a trial version. other viewers won't work....
anyone?
LogMeIn with Diamond2 - problem
Hi, I used to be able to use LogMeIn in my old PDA running on WM5. But now after i've gotten HTC Diamond2, I'm unable use my remote access software anymore...
I've gotten my friend to try using his HTC Touch HD and it work too for LogMeIn.
A quick check reveal that our IE could be slightly different version.
Did you have any solution yet?
"Vista 32 bits" is unfortunately not very descriptive. What version is it? Not all versions include Terminal Services.
By static ip, do you mean that your external interface IP is static or that the IP your PC might have on an internal network is static? There's a HUGE difference!
You need port 3389 forwarded to your PC from your router. Enter your external IP address in the RDP client and it will get forwarded properly. Hell, I've got 3389 forwarded to a VM I'm running on my PC and it works great.
Diamond 2 can use LogMeIn
Finally got my HTC Touch Diamond 2 (Topaz) to use LogMeIn. My friend who uses Touch HD and can use LogMeIn easily...
I guess the IE in Diamond 2 is not Pocket IE (PIE).
Procedure:
1) I use this software to toggle IE6 to PIE.
http://discussion.treocentral.com/treo-pro/177752-toggle-between-pie-ie6-free-app-cab-file.html
2) Login to LogMeIn PDA
https://secure.logmein.com/pda
3) Follow normal LogMeIn procedures...
Happy LogMeIn!!!
I use Logmein's Hamachi (that is a VPN software) that give me a direct p2p connection between my HTC fuze any my computer. Then i use remote desktop and use the ip hamachi provides and it work excellent.
PS you need at add you PPC hamachi ip in you firewall
vnc is what I would use it's a good general solution to connect
anything with anything mac, linux , windows you name it and it's free

A Remote RDP Tutorial?

I honestly don't know what I'm doing. All I know is that all the things I've tried so far didnt work.
Can someone guide me on how to set this up on my NookColor?
My PC and NookColor share the same wifi connection via an Airport Exteme router. I know that there are two IP Address: one form y router, which I can see on www.whatismyip.com and the other is my computer's which I can see via cmd > ipconfig. So, my question is-- how do I set this thing up? Any step by step procedure?
What have you already tried? Also what version of OS are you using, some versions of windows have RDP kneecapped. Also, where are you trying to view it from?
If you already have RDP going, you can use Wyse PocketCloud to manage the connections through your google account, it's pretty straight-forward.
Personally, I use TightVNC as the desktop client and AndroidVNC Viewer and ConnectBot on the nook. I only use my home computer when at home, so the setup is fairly simple, have AndroidVNC talk to myipaddress using port 5900. Be sure to use the connecting password when you set up TightVNC - also check the character count as you enter it, sometimes it doesn't take all the characters, ie; the password "bob-ismyuncle" is stored as "bob-ismy".
For connections remotely (not on the same network) I first SSH into the machine with ConnectBot, then set up a port forward to localhost:5901 which AndroidVNC then connects to.
Also, has anyone tried NX?
I'll assume you're a windows user?
Make sure RDP is enabled on your PC (google it, really easy to enable)
If BOTH machines are connected to your network... get the PC's IP address (via cmd ipconfig) and connect to it using the RDP port (3128 on Windows)... ex: "192.168.100.199:3128"
If you want to use RDP away from home, you need to configure your router to forward any external connections on the RDP port directly to your PC. Then you'll want to connect using your external (router's) IP address. Ex: 111.222.333.444:3128 => 192.168.100.199:3128 .... then connect to "111.222.333.444:3128"
I like LogMeIn free and logMeIn Ignition great little app. also teamviewer has a free version and free app for android

Categories

Resources