Database Users

1.06 ROM, GPRS not always-ON

Has anyone come up with a fix so that the GPRS is back to being always on as it was in the original 1.03 ROM? I have read some posts on this on other sites, but I have not found anything here. I assume that I have everything set properly, but the GPRS has to be started every time now.
In general I do not feel that the 1.06 ROM upgrade did much of anything to enhance my device, and quite frankly I wish I was back to 1.03, however, I have heard that a new ROM upgrade will soon be released and I bet that one or I hope that one will provide some real value and fix things.

I've posted this in another thread, here's the quote:
Here's a solution I've done to my XDA II with T-Mobile GPRS problem. I don't know who came up with this solution, but thanks to my friend who suggested this at PDAMobiz.com.
1. After a hardreset and completing the initial screen alignment, interrupt the auto-installation process by softreset your XDA II (you have 3 seconds before the files in Extended_ROM will automatically install).
2. Make your Extended_ROM viewable, whether by using the Extended ROM Viewer from http://www.ppcw.net or Extended ROM Switcher (sorry I forgot the link).
3. Now, install each cab files, except TMD_AP_NL.sa.CAB. In fact, I also disregarded, Caller ID, and some other TMD stuff.
As a result, the GPRS is now always-on as it should be.
Cheers,

Thank you for responding to this post. I had to wait quite awhile.
Your #3. states to install the cab files and disregard the TMD files. Did you delete these files or just not open them? What are these TMD Files for?
I assume that I cannot, at this point and without a hard reset, just delete the TMD Files that are viewable in my Extended Rom. Is this a correct assumption or could I accomplish the same goal by just deleting those files?
Thank You

gratefuled said:
Thank you for responding to this post. I had to wait quite awhile.
Your #3. states to install the cab files and disregard the TMD files. Did you delete these files or just not open them? What are these TMD Files for?
I assume that I cannot, at this point and without a hard reset, just delete the TMD Files that are viewable in my Extended Rom. Is this a correct assumption or could I accomplish the same goal by just deleting those files?
Thank You
Click to expand...
Click to collapse
Yes you need to delete does file from Extended_ROM and hard reset it.
Or hard reset, quickly soft reset after you finish the screen calibration, run the extended_rom viewer and manually open/run each of the cab files except the mention cab. ( basically follow exactly what jopard said ).
I read also somewhere in this forum that someone did a differrence search on the registry between GPRS always on and GPRS off when idle. With this method you can change the setting without hard reset.

Hi, the mentioned cab installs the following registry key (among others):
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ConnMgr\Planner\Settings]
"CacheTime"=dword:0000003c
"SuspendResume"=hex(7):\
69,6e,74,65,72,6e,65,74,00,00,00,00
I guess it must be the SuspendResume setting. Can you post your setting without applying the cab file?

softworkz said:
Hi, the mentioned cab installs the following registry key (among others):
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ConnMgr\Planner\Settings]
"CacheTime"=dword:0000003c
"SuspendResume"=hex(7):\
69,6e,74,65,72,6e,65,74,00,00,00,00
I guess it must be the SuspendResume setting. Can you post your setting without applying the cab file?
Click to expand...
Click to collapse
This is my setting running my own cook 1.60.06 skiping that file:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ConnMgr\Planner\Settings]
"SuspendResume"=hex(7):7E,00,47,00,50,00,52,00,53,00,21,00,00,00,00,00,00,00,00,00
"CacheTime"=dword:00000258
And yes my GPRS is always on.

Hm, I'll try that, but I had another problem:
When I was always GPRS-connected my GSM-connection was always lost
after 12-24h. The device showed that it is connected but I could not dial out and I could not be called.
Now since I am not "always on" anymore I do not have this problem anymore.
Did you experience something similar?

softworkz said:
Hm, I'll try that, but I had another problem:
When I was always GPRS-connected my GSM-connection was always lost
after 12-24h. The device showed that it is connected but I could not dial out and I could not be called.
Now since I am not "always on" anymore I do not have this problem anymore.
Did you experience something similar?
Click to expand...
Click to collapse
Mine work fine I can call, received phone/sms while npop and aim is running in the background.

is there
Is there a way to do this without hardrestting? It just took me two hours to load all the program into XDA. Can I just hack the reg?
thanks

my rom
My rom does not even have this cab in the ext file. Can I hack it in the reg?
I have XDA II 1.50WWE ROM
thanks

softworkz said:
Hm, I'll try that, but I had another problem:
When I was always GPRS-connected my GSM-connection was always lost
after 12-24h. The device showed that it is connected but I could not dial out and I could not be called.
Now since I am not "always on" anymore I do not have this problem anymore.
Did you experience something similar?
Click to expand...
Click to collapse
I think you will find that many carriers have a "timeout" after several hours of non use.
Dave

SuspendResume
What does this look like in the registry:
This is my setting running my own cook 1.60.06 skiping that file:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ConnMgr\Planner\Settings]
"SuspendResume"=hex(7):7E,00,47,00,50,00,52,00,53,00,21,00,00,00,00,00,00,00,00,00
I have PHM Registry Editor, and entering the entire string does not look like a meaningful option.
Is it a REG_DWORD with a base of HEX ?
Regards
Michael

I use resco registry editor you can just import in that registry.
I found another post regarding this issue:
http://forum.xda-developers.com/viewtopic.php?p=26866

I'm afraid I do not understand how this thread has evolved.
I understand the posts that speak to the hard reset and softreset within 3 seconds to keep the device ROM applications from loading. From there to install fix for viewing extended ROM files and then load everything except TMD, and perhaps some of the T-Mobile apps you do not want. Although the response says a specific TMD file and some other TMD-no specifics, all or some?
The balance of the thread seems to speak to radio settings.
Is it being said that you can change some settings on the radio stack and get the GPRS always on? If so how do you do this in reasonably simple terms?
Ed

Nonintrusive Keep-Alive
The intrusive solutions are enticing to me but they are for "developers". From a user's point of view, I am always worried about doing something and then not being able to restore it to the original state (or having to spend a lot of time to get back) should something go wrong. My bandage solution (unique to my use situation) is to open an ssh or a telnet window and run a shell script which loops to print the current timestamp and then sleeps for 5 seconds. A T-Mobile tier 2 tech guy told me that the disconnection was by design for the benefit of network service providers so that they can save on connection resources.
By the same token, I like the Keep-Alive application solution - I think it is worth my $2.45 (See thread http://forum.xda-developers.com/viewtopic.php?t=5220). I wonder if the to-come T-Mobile Windows PPC 2003 comes with some sort of control that is equivalent to the Keep-Alive application - in a matter of a month or two, supposedly.

MS Voice Command when unit is closed?

Hi all, I am new to this forum.
I own a Dopod 900, and currently trying to get MS Voice Command to work properly with my unit. I believe one of the problem with this application is that it does not respond to command while the unit is in closed mode (the pda screen in inside). Is solution to this problem already available?
I have searched the forum but have not been able to find any solution. I apologize if I missed it, please kindly point me to that posting if there is any.
Any advise is greatly appreciated.
- Josh :?:

From what I've read so far there isn't a fix I'm afraid. It's not fully compatible with WM2005 and will just have to wait for an update from Microsoft :-(

Thanks for your reply. That's too bad. I really have high hope that there is a solution for just this one problem, as there are already tweaks for the other problems. Being unable to receive command in closed mode really make MS Voice Command very much less usable. Too bad.
- Josh

I agree, but at least it's a step up with the other voice dial (that comes it with?). Couldn't do dialling from BT headset at all on WM2003 :-(

The "closed mode" doesn't bother me as I carry the Exec round in a Krusell case, with screen up. This allows me to instantly answer the phone when it rings (having seen who's calling first on the screen).
But there are a few more annoying problems with MS Voice Command 1.5 (I have UK version) present under Windows Mobile 5.0.
This one is unique to WM5.0:
- The first is when I try to call up a certain contact by "Show John Smith", it would show John Smith's contact under WM2003/03SE, but under WM5.0 it just shows blank screen on the Summary tab. This is still a proper contact, if you go to Notes tab, you see proper notes for this contact. You can press Edit and it will be edited... BUT, meanwhile if you just open Contact app, the ones you open are working great.
GBugger...
The following coupla' niggles are also present under WM2003/03SE.
- The days of week when answering "What date is it today" (somehow UK regional settings don't even have it, so I had to enable it in registry under NLS settings) -- all are announced correctly except Wednesday & Thursday, which are sounding simply as "Wed" and "Thu" instead of proper name.
- The signal strength for 1,2,3 and 4 "units" is announced as 30, 60, 90 and 100% correspondingly, instead of 25,50,75,100 which would seem more logical here. I don't know though if it's just caused by something real or an attempt to easily convert
That said, the application is enormously useful especially with the Krusell case, because the carrying shape for Exec in this case is PDA shape with screen up; but it's protected by screen cover of the case and you can't really write on the screen without opening the case -- so voice activation of programs and then controlling them by 5-way navigation control, is really a great way of using the Exec Examples of these programs are the eWallet (ever forgotten your PIN numbers or clothes size?) and speaking date/time, very convenient when you can't look down there.
Hopefully Microsoft corrects these small errors - the WM5.0 devices are the future.

EastExpert said:
Hopefully Microsoft corrects these small errors - the WM5.0 devices are the future.
Click to expand...
Click to collapse
Really, MS should have had this wrapped up ages ago. So disappointed. I want a device like the Exec, but with Voice Command fully working and A2DP sorted, and it's a shame I still can't get all this.
I was so used to the VC software on my JAM, shame the Exec is giving problems.
And I'm tired of tangling my headphones up...
MS, sort all this out already.

EastExpert said:
The first is when I try to call up a certain contact by "Show John Smith", it would show John Smith's contact under WM2003/03SE, but under WM5.0 it just shows blank screen on the Summary tab. This is still a proper contact, if you go to Notes tab, you see proper notes for this contact. You can press Edit and it will be edited... BUT, meanwhile if you just open Contact app, the ones you open are working great.
Click to expand...
Click to collapse
Copy the outres.96.dll into the windows folder and the contact will display correctly.

I'm sorry, but no, it doesn't work for me. Same effect as without outres.96.dll. And yes, I made a soft reset after copying it to the windows dir.
So the next question now is: how to remove the file again?
If I try to delete it, Resco Explorer says "Cannot delete file 'outres.96.dll'. The process cannot access the file because another process has locked a portion of the file."
If the file is useless, then I want to remove it from the device. But it has been blocked by another process.
Thanx in advance
tomestos

I had the same problem but saw the answer on a forum somewhere. After you have installed the dll and do a soft reset as it reboots for a short period it does a security check on the new dll and asks whether you really want to install it, if you answer yes then you will find the blank contacts screen problem is fixed. If you take your eyes off the screen at the end of the soft reset you will miss this security question a it defaults to No after a few seconds. Hope this helps.

I had the same problem but saw the answer on a forum somewhere. After you have installed the dll and do a soft reset as it reboots for a short period it does a security check on the new dll and asks whether you really want to install it, if you answer yes then you will find the blank contacts screen problem is fixed. If you take your eyes off the screen at the end of the soft reset you will miss this security question a it defaults to No after a few seconds. Hope this helps.

guc925 said:
I had the same problem but saw the answer on a forum somewhere. After you have installed the dll and do a soft reset as it reboots for a short period it does a security check on the new dll and asks whether you really want to install it, if you answer yes then you will find the blank contacts screen problem is fixed. If you take your eyes off the screen at the end of the soft reset you will miss this security question a it defaults to No after a few seconds. Hope this helps.
Click to expand...
Click to collapse
I have answered 'yes' to the security check. Nevertheless the dll doesn't work for me. So I want to remove it now, but I can't because it's blocked by some process.
Thanx in advance
tomestos

I've copied the file gnassel suggested into my Windows directory (using the explorer on my desktop pc).... rebooted the exec.. and voila.. it's working like a charm now.. My voice command shows the contact when I say : "Lookup XXXX" or when i call someone, it confirms the person and shows his information just fine. Norte I am usin the u.s. version of voice command 1.5.
Thanks gnassel !

This is a reply to my own posting above.
I did the soft reset using an application called 'psShutXP' (maybe someone knows it; one use it in order to switch off or soft reset the device). Voice Command's contacts mask doesn't worked.
A few minutes ago I soft resetted the device using the "original" reset hole. And voila: Voice Command works as expected!
So there seems to be a difference between "soft reset" using psShutXP and soft reset using the reset hole.
Sorry for the confusion. THE FILE OUTRES.96.DLL WORKS!
By the way: What exactly does outres.96.dll?
Best regards
tomestos

Many thanks gnassel, it works great..

The file was from OzVGA

Thanks for drawing attention to it and posting it, or I wouldnt have know..
Take a thanking damnit

Guys, where do I put the outres.96 dll file again? If I am using File Explorer there is a "WINDOWS" Folder from the very root with a lot of files. Is that the folder I am suposed to put the oures.96 dll file or just leave it outside in the main root?

cktlcmd said:
Is that the folder I am suposed to put the oures.96 dll file?
Click to expand...
Click to collapse
yes
c:\windows\
;-)

gnassel said:
cktlcmd said:
Is that the folder I am suposed to put the oures.96 dll file?
Click to expand...
Click to collapse
yes
c:\windows\
;-)
Click to expand...
Click to collapse
It's "\windows" not "C:\windows".
Best regards
tomestos

Thanks everyone. I thought for a while I have to plug it in my computer too.

"This device is restricted from downloading this file t

My Qtek 9100 with the latest english generic ROM was working fine for months. This morning, I removed the SIM and put it back in. Since then, it won't activesync, I can't drag n drop files to it through Explorer, and when I try to download a CAB file via IE, I now get this error message:
"This device is restricted from downloading this file type."
Any ideas? I don't understand what happened to it! It's like it moved to a very strict secure mode all by itself. It doesn't make any sense!

It seems that my security policies are all whacked up. The device doesn't even see the installed applications in the "Software uninstaller manager" app anymore. I tried rebooting and soft-resetting, no good.

ok guys, in order to fix my problem, I NEED one of you to send me ALL the keys and data info from this registry folder:
HKLM\Security\Policies\Policies\
Please export that registry for me as a text file and attach it here (or copy/paste it), so I can retype it manually on my Qtek 9100 phone (I can't import anything on my PDA atm as I can't download anything to it, it won't let me).
If none of you do this small favor to me, I am screwed. I would need to hard reset and lose everything (I can't back up anything).

Here Goes...
Ok, I am running the latest "T-mobile custom" ROM, ROM version 2.24.10.1 WWE. I should have no policies enabled... I have typed out all of the keys and values under this in notepad in the format name-value. all values should be DWORD. Hope this helps....
__________
Edit: My phone is a t-mobile MDa, don't think that should matter...

Thank you very much, much appreciated.

I have this issue but I can't view the txt doc can someone paste it here or email it me in the body so I can add them manually or if ur really kind email me the cab file. I have the htc wizard running the most beautiful edition rom. will this work by any chane? I can't download any file this device is restricted from downloading this file type every bloody time... (bloody being f*cking)
keithstewartson at hotmail.com

this device is restricted from downloading this file type
I have this issue but I can't view the txt doc can someone paste it here or email it me in the body so I can add them manually or if ur really kind email me the cab file. I have the htc wizard running the most beautiful edition rom. will this work by any chane? I can't download any file! "this device is restricted from downloading this file type" every bloody time... (bloody being f*cking)
keithstewartson at hotmail.com

hel
any1 ? please asap

Okay hate to bring back an ANCIENT Thread but do I add these security polocies or remove the ones that are currently in there and then add these or how do i do it.

Okay hate to bring back an ANCIENT Thread but do I add these security polocies or remove the ones that are currently in there and then add these or how do i do it.
Edit:
Okay I found that my security policies on my MDA did NOT match totally with the one that was posted here. Little adjustments had to be made in the value of the d-words as well as 3 dwords had to be added.
I also found ADDITIONAL D-Words:
Original .txt security DWords posted:
name-value (all DWORD)
00001000-8
00001001-1
00001005-16
00001006-1
00001007-64
00001008-1
00001009-5
0000100b-3716
0000100c-2112
0000100d-3136
0000100e-64
0000100f-3732
00001011-1
00001017-16
00001018-16
00001019-140
0000101a-1
0000101b-1
0000101d-1
0000101e-1
0000101f-1
00001020-1
00001021-3072
00001023-1
00001024-1
00001025-1
Additional Ones found on MY MDA
00001026-1
00001027-1
00001028-1
00001029-1
0000102A-1
0000102B-0
0000102C-0
0000102d-3200
0000102e-3200
0000102f-3200
00001030-0
00001031-1
00001032-1
I have not checked if changing these have fixed my issue or not so lets find out I will post back with the result. Should I try removing the additional ones found on my MDA?

Merely changing the security Policies as listed in the .txt did not fix the problem

I have this problem too, I can't even edit the registry so I can't even try to put the policies back again. By the looks of things that won't work anyway.
Anyone got a solution that doesn't involve wiping the phone? Not that I know how to do that anyway. I have an XDA Orbit from O2.
Thanks,
Sapan

Same problem here
I have the same problem (XDA Orbit 2)
Worked fine for the first few days - was able to download CABs etc. Then it just stopped. I've read elsewhere about root certificates. Could this be the problem?

this device is restricted from downloading this file type
I have had this problem on my HTC touch with windows mobile 6.
This microsoft bug can make you loose a lot of work, time and data.
Are the Microsoft programmers drinking while they work?
Here is the solution I found!
http://www.24hsoftware.com/How-To/this-device-is-restricted-from-downloading-this-file-type.html
I hope it fixes your problems too.

Restricted Download !!!!! Hum
Hello all. I also have a Qtek 9100 for more than 2 years.
Honestly i never had that problem. And i already flashed undreads of ROMs and software to it.
One thing is that i always have Backup Software for any eventuality. Things can always go wrong.
Tips
First - Try to use Resco Registery Editor,its a good Software to make any changes "Delete/Rename/Copy/Add etc,etc.
Second - Look for Its Right,the TNT Master. It will be dificult to find him as he is getting is Engineer Degree. You can also ask Octaivoi,he is a Wizard Master 2.
Third - Keep an exautive search in XDA Devs and eventualy you all will find the answere.
Fourth - Get a Backup Software,get back all the software that cant be recovered. "Eugenia software can always be recovered". And FLASH a new ROM. There are many,many Beautiful and advanced Wizard ROMs arround XDA Dev.
Hope that any of these tips can help

SOLVED!!! ThankS!!!
mioan said:
I have had this problem on my HTC touch with windows mobile 6.
This microsoft bug can make you loose a lot of work, time and data.
Are the Microsoft programmers drinking while they work?
Here is the solution I found!
http://www.24hsoftware.com/How-To/this-device-is-restricted-from-downloading-this-file-type.html
I hope it fixes your problems too.
Click to expand...
Click to collapse
first had this problem with the empty "remove programs" list 6 months ago, glad to see this whacked-out solution that works!!
Conclusion: Microsoft Windows Mobile messed up the security settings, so let Microsoft Word Mobile put it back automatically, voila!

And ofcourse, I've read about this "fix" soo many times at so many places, and it works for everyone but me >.< I tried all the different ways theres to it, nothing worked. One more thing, shutting it off and THEN pressing soft reset doesn't make sense. Anyway I tried, and it didnt fix. Still got the file deletion/changing restriction. Can't sync, can't get online, download files nothing ... If only Microsoft cared to fix this. Anyone any idea? Dutch phone, Hi provider, rom version: 1.93.404.1 NLD

A Real Fix
Has anyone on this board found A REAL FIX to this problem?
Because I just got my tilt 6 months ago was doing good and now cannot download, cannot stream, cannot play cellular videos, radio.
I have tried the office word solution. That did not work for me!
Is there a Real Solution?
THANKS IN ADVANCE!

A Real Fix
Has anyone on this board found A REAL FIX to this problem?
Because I just got my tilt 6 months ago was doing good and now cannot download, cannot stream, cannot play cellular videos, radio.
I have tried the office word solution. That did not work for me!
Is there a Real Solution?
THANKS IN ADVANCE!

I'm sorry it didn't work on your device. I had the same problem, no sync, no file copy/rename on the device, no cab install, no programs in "add/remove programs" on my Mio A702 thing. The MS Word solution worked smoothely and now I have everything as it should be. So I can confirm the "word thing" actually works . Don't know why it won't do the trick in your case

AutoUpdate of time on WM6

I am a frequent traveller, I travel a lot between Eastern and Central Time zones.
When my PPC was on WM5 it used to Auto update the time no matter which state I used to be in.
But ever since I updated my PPC to WM6 the AutoUpdate of clock stopped working. Can someone help me out
i did find a registry entry which I used.. I do timezone tab in Phone settings and it is checked to autoupdate and still the phone is unable to update the time from network.
anyhelp is greatly appreciated

You are seriously wondering why you are not getting full functionality out of a bootlegged OS?

chichu_9 said:
I am a frequent traveller, I travel a lot between Eastern and Central Time zones.
When my PPC was on WM5 it used to Auto update the time no matter which state I used to be in.
Click to expand...
Click to collapse
I can't help with the WM6 question...but I am curious how you managed this with the WM5 OS. I have an 8125 and apparently a similar travel pattern. My device NEVER updates the time based on the network. How did you set this up when you were still running 5?

I am interested in how you got it working as well. Mine did not update once from the east coast to the west coast. Not even when making a call.

well i have a reg tweek that will change the time when you enter a diff time zone via the network...hope this is what your looking for....
Timezone and time update
In the branch HKLM\Software\OEM\PhoneSetting Change the value of the Key "ShowTimeZonesPage" to value of 1 (dword). Close your registry editor (no reset required) and tap START-SETTINGS-PHONE, there should be a new tab where you can automatically set the phone to get time and timezone information from the network. Really useful for me as I do extensive travelling. Tested on WM5

ugahairydawgs said:
You are seriously wondering why you are not getting full functionality out of a bootlegged OS?
Click to expand...
Click to collapse
thats why this is called xda-developers. we'll find a way to make it work.

btw how did you get the new wm6 on your wizard....is there a link..

yes, i was wondering where the wm6 rom download is also.

>> bj///////////////////////////////////////////////////

RiNo808 said:
Timezone and time update
In the branch HKLM\Software\OEM\PhoneSetting Change the value of the Key "ShowTimeZonesPage" to value of 1 (dword). Close your registry editor (no reset required) and tap START-SETTINGS-PHONE, there should be a new tab where you can automatically set the phone to get time and timezone information from the network. Really useful for me as I do extensive travelling. Tested on WM5
Click to expand...
Click to collapse
Yes! Its there on WM6 too!!!! Dont know if it actually works, yet to travel in a different timezone.

I have had it enabled in my registry in WM5 and WM6. It's NEVER worked for me. I change phones a lot so I'm always taking out the SIM card. When I do this, the battery comes out and it loses time/date.
I'd be curious on the details as well because I've never heard anyone that actually had it functioning!
-Mc

I tested this tweak and it seems to work when I initiate flight mode and then turn flight mode off (which will be great when I land on the plane...the time will adjust automatically).
Will this update periodically check the time to ensure it's sync'd or will this only work when the phone initially communicates with the network?

acording to microsoft list of bugs in all from aku1 to aku3 this feature never worked and they never fixed it..... since crossbow has several parts of old aku roms my guess is it does not work either..... this feature is also carrier dependent if you manage to make it work.

faria said:
acording to microsoft list of bugs in all from aku1 to aku3 this feature never worked and they never fixed it..... since crossbow has several parts of old aku roms my guess is it does not work either..... this feature is also carrier dependent if you manage to make it work.
Click to expand...
Click to collapse
My carrier supports it. My Wizard never did with the ROM hack or with Crossbow. So if it worked, I'd love to find out how! This at least makes me feel good that I'm not missing out on something...
-Mc

McHale said:
My carrier supports it. My Wizard never did with the ROM hack or with Crossbow. So if it worked, I'd love to find out how! This at least makes me feel good that I'm not missing out on something...
-Mc
Click to expand...
Click to collapse
upon doing some more reading aparently some aku3 roms now support it!!!
but in a diferent way. here it is;
Receiving Network Identity and Time Zone(NITZ) information is currently unsupported.
This feature was incorrectly documented to be supported by Windows Mobile Version 5.0 AKU3.0 in Windows Mobile Version 5.0 Documentation Release. NITZ is currently supported at Radio Interface Layer(RIL) only.
Click to expand...
Click to collapse

OK, so apparently this functionality is in fairly high demand...and since we're talking about WWAN devices, hasn't someone written an app that will periodically ping a time server (like PC OS's) and update the time on the device?
I am NOT a developer, so maybe I'm missing something obvious here. But it doesn't seem like a complicated concept for sure.

registry wizard does this
the xda-developers registry wizard allows you to make the registry tweak "show time zone s page" in both WM5 and WM6,- this put the time zone tab in phone-options, but the feature never worked for me. I called my provider to confirm if they supported it but the help desk was clueless- Would love to see if anyone got this working.

Confirmed working on my 8125 through the Cingular network. Before the hack I had to initiate a physical active sync through USB or manually change the time. Now if I go and change the time to say an hour ahead within 5 -10 seconds the time reverts back automatically.

ctgoodman said:
Confirmed working on my 8125 through the Cingular network. Before the hack I had to initiate a physical active sync through USB or manually change the time. Now if I go and change the time to say an hour ahead within 5 -10 seconds the time reverts back automatically.
Click to expand...
Click to collapse
what ROM are you using? I'm on Cingular in IL and it doesn't work here.
-Mc

Interactive said:
OK, so apparently this functionality is in fairly high demand...and since we're talking about WWAN devices, hasn't someone written an app that will periodically ping a time server (like PC OS's) and update the time on the device?
I am NOT a developer, so maybe I'm missing something obvious here. But it doesn't seem like a complicated concept for sure.
Click to expand...
Click to collapse
Here is a quote and a link to a program I found on the Cingular/HTC forum:
"How hard would it be to go to the clock settings and select the "visiting" button and select the time zone you are in?
Works for me.
There are options for atomic clock server time sync. But that won't address time zone issues.
http://zdnetasia.com/downloads/handheld/swinfo/0,39043246,39175141s,00.htm
"
I don't go out of my own time zone, so I don't really have any issues with it. The registy hack has worked just fine on my 8125.

Problems Opening e-mail (from HTC Sense)

Hi all, I have recently changed my HTC HD for an HTC HD2, but nearly immediately, still without adding any thirdy party program I am nearly systematically facing with the following problem
I am failing opening the received emails (using Microsoft Excange Server Setting) using HTC Sense (i.e. I mean by clicking on the e-mail).
The only way to read emails is then go to the email tab then select ALL from the left bottom corner and then press one of the email in the proposed list to read/open it. This is my actual configuration:
OS = 5.2.21869 (21869.5.0.82), Manila = 2.5.192116190, ROM = 1.48.408.1 (71294) ITA, ROM Date = 11/16/09,Radio = 2.05.51.05_2, Protocol = 15.28.50.07U.
Can someone help me ?
Many thanks in advance for your kind support ))
Cheers,
Max

I am experiencing the -exact- same problem.
Going to the email tab and tapping on the envelope on the screen does nothing. I can see that it registers the tap, since the envelope 'bounces'. The email doesn't open up like it normally would though.
I have no clue why this keeps hitting me :S I have tried hard resetting 4 times, and it keeps happening.
Someone please provide some insight in to what is breaking in Sense when it comes to the 'open email' functionality.
OS: 5.2.21869 (21869.5.0.82)
Manila: 2.5.19211619.0
ROM: 1.48.403.1 (71294) DAN
ROM Date: 11/20/09
Radio: 2.05.51.05_2
Protocol: 15.28.50.07U.

Tap Start, then Lock. Unlock your device and hopefully bug is gone (till it next appears and you redo the steps).

This very bug has appeared with 1.48 ROMs...
Together with another bug: The lockscreen did not work unless you would force the device to lock using the soft button from the start menu.
Once done, the lockscreen bug plus the mail not opening bug magically disappeared, but I have not seen any thread so far with a clear explanation for the exact reason...

It fixed
tnyynt said:
Tap Start, then Lock. Unlock your device and hopefully bug is gone (till it next appears and you redo the steps).
Click to expand...
Click to collapse
Well I don't know what this will do...but what ever it fixed the issue, I never had that issue with version 1.43 and I have updated ROM to 1.48...did that bring in that bug ?

tictac0566 said:
This very bug has appeared with 1.48 ROMs...
Click to expand...
Click to collapse
I've had this on my stock 1.43 too.

tnyynt said:
Tap Start, then Lock. Unlock your device and hopefully bug is gone (till it next appears and you redo the steps).
Click to expand...
Click to collapse
Wow, it worked. Can't believe it was that simple. I guess this will be fixed by HTC in the next ROM update. Seems to be related to the autolock when you put the device in standby, which explains the randomness to some extent...
Thanks tnyynt!

Hi guy, let me try then I was becoming crazy as I did several hard resets attempting to identify which (installed) programs may generate this issue, so installing one by one, resetting etc. but without effect. Suddenly the problem re-appears ... I will re-install everything and let you known accordingly. Anyway just for your info I have opened an official ticket on HTC website about this topic: they suggested me to reset, install latest hotfixes and the new ROM, that today seems to be disappeared from the site, but obviously they did not solve my issue yet :-(

tnyynt said:
Tap Start, then Lock. Unlock your device and hopefully bug is gone (till it next appears and you redo the steps).
Click to expand...
Click to collapse
Massimiliano_C said:
Hi guy, let me try then I was becoming crazy as I did several hard resets attempting to identify which (installed) programs may generate this issue, so installing one by one, resetting etc. but without effect. Suddenly the problem re-appears ... I will re-install everything and let you known accordingly. Anyway just for your info I have opened an official ticket on HTC website about this topic: they suggested me to reset, install latest hotfixes and the new ROM, that today seems to be disappeared from the site, but obviously they did not solve my issue yet :-(
Click to expand...
Click to collapse
Same here, I even Hard reseted my phone twice, and was going to do it again...
Thanks a lot, tnyynt...

Hi guys, I have terminated the re-installation of all my preferred software but this time, following tnyynt indications, before all I have installed the following CAB I found here: "Touch X autolock disable". As result, during the installation of each program and in the end once terminated the restoring of all my preferred applications it seems the problem does not occur anymore so apparently without the need to do the trick suggested by tnyynt. I would you suggest to try ... just in case it works for you too Thanks again tnyynt

Massimiliano_C said:
Hi guys, I have terminated the re-installation of all my preferred software but this time, following tnyynt indications, before all I have installed the following CAB I found here: "Touch X autolock disable". As result, during the installation of each program and in the end once terminated the restoring of all my preferred applications it seems the problem does not occur anymore so apparently without the need to do the trick suggested by tnyynt. I would you suggest to try ... just in case it works for you too Thanks again tnyynt
Click to expand...
Click to collapse
Arfff...your cab is for the screenlock...
Not this Mail problem...

thanks some times problems like this can get you crazy!

Having the same problem here right after I installated 20ShortCuts.....

euror said:
Having the same problem here right after I installated 20ShortCuts.....
Click to expand...
Click to collapse
But you've obviously read the whole thread and therefore know how to fix the issue?

Just come across this issue a few days back, but with a twist -
Firstly the lock/unlock fix detailed on the previous page does not work for me, nor a soft reset. I am loathe to hard reset, since I am suffering none of the other issues many people are (sms etc).
As described on the previous page; on the email tab of HTC Sense the email does register the request to open, as it "bounces" when tapped, but will not open in poutlook.
I noticed it, but wrote it off as one of the many quirks of these phones, expecting all to be well in a few hours. But after almost a week I noticed I was not receiving mail at all. Wanting to check the settings, I opened Pocket Outlook via the start menu, and found that all of my mail accounts had disappeared! Leaving the default outlook demo account only. But I can still view and scroll through (but not open) existing mail via Sense.
I know I am going to have to HR, but I am curious to know if anyone else has suffered the issue, and if a trigger/solution has been found.

MailAccountRepairProgram
In the case of damaged Mail-Accounts u can try this Program before Hardresetting... Quite easy and works 100%

elburna said:
In the case of damaged Mail-Accounts u can try this Program before Hardresetting... Quite easy and works 100%
Click to expand...
Click to collapse
Thanks, never seen this program before. It worked, to a degree. It restored my folders to Poutlook, but the restored accounts have lost the connection settings (pop,smtp). I think that was user error though
Thanks for taking the time to upload

I should have said, that this prog is mainly for making lost accounts visible again in order to delete them afterwards with the same prog (like in the case when they where visible in manila but not in outlook). Never tried to use a repaired account again (always deleted them and created a new one). But if you say, you only needed to reenter the connection-settings... nice to know that this works

Same Problem in my Verizon Rhodium Wit March 7th Energy Maxmanila ROM
same problem for me. I even tried hardreseting and reinstalling the rom witjout any succes. The lock Unlock suggestion doesn´t work for me. Any clue?

HTC sense mail issue problem
I tried the Chrisd1a1 Solution in:
http://forum.xda-developers.com/showthread.php?p=5442905#post5442905
EMAIL ISSUE FIX
Go the following Key:
[HKEY_LOCAL_MACHINE\System\Inbox\Templates\IPM\Note]
Change the following value from:
"Read"="\\Windows\\HTC_read_note.htm"
TO:
"Read"="\\Windows\\read_note.htm"
change Compose to:
"Compose" = \\Windows\compose_note.htm"
And Is not working either.
Any clue???