endless vibration on SMS ... - Touch Diamond2, Pure General

Hi,
i use S2U2 to lock my device...
Sometimes if i get a SMS the sceen stays black
and the vibration alarm keeps running till i unlock
S2U2 ...
Does anybody else have it or know how to fix that ?
It only happens from time to time...

Frank67 said:
Hi,
i use S2U2 to lock my device...
Sometimes if i get a SMS the sceen stays black
and the vibration alarm keeps running till i unlock
S2U2 ...
Does anybody else have it or know how to fix that ?
It only happens from time to time...
Click to expand...
Click to collapse
I use S2U2 and don't have this behaviour.
Sorry
Tony

i don't use S2U2 but it's happened to me a few times before. I reset the phone afterwards but every now and again it happens. No fix?

Hi
You may be able to resolve this by using advanced config and setting the "resuming timeout" values under the Power options to around 15 seconds.
What is probably happening is the phone wakes up in unattended mode (it still looks off) and it sends a start vibrate signal, however the phone then goes back to sleep before it has chance to send a vibrate stop signal.
Regards
Phil

PhilipL said:
Hi
You may be able to resolve this by using advanced config and setting the "resuming timeout" values under the Power options to around 15 seconds.
What is probably happening is the phone wakes up in unattended mode (it still looks off) and it sends a start vibrate signal, however the phone then goes back to sleep before it has chance to send a vibrate stop signal.
Regards
Phil
Click to expand...
Click to collapse
Hi,
is it the "Battery resuming from suspend timeout" option ?

Hi
Yes it is.
Regards
Phil

ok thanks , then it didn´t help ...

any other ideas ?

yesterday evening it happend all the time i got a SMS
while my device was connected to the powercord
Edit:
If it happens i don´t hear the SMS sound.. only my
LED starts flashing and it vibrates till i unlock S2U2

Related

TyTN bugs: (1) never sleeps, (2) multiple alarms

Hi,
I've got two niggly problems with my TyTN:
1. Despite having the power options set to 'turn off device if not used for' set to '2 minutes' the phone never actually powers off, the backlight goes off but I can still see the screen text and buttons remain active. (the only thing running in the background is Spb Pocket Plus).
2. Two days ago I set the alarm for 6.30 AM, it went off, i then adjusted it to 7.30 AM. This morning the alarm went off at 6.30 AM and 7.30 AM (I double checked the settings and there is only one alarm set).
PS. I also have a keyboard which doesn't respond perfectly to every key press although I am finding this is improving the more I use it.
I add point 3) e 4) :
3) Sometimes when alarm rings I can't see nothing... no Notification...just the ring...therefor I can't stop it!!!
4) It's happened two times... I set sound off... through comm.manager ( I'M SURE) and after a while when my friends called me the phone rang! It's strange don't u think?
philask said:
Hi,
I've got two niggly problems with my TyTN:
1. Despite having the power options set to 'turn off device if not used for' set to '2 minutes' the phone never actually powers off, the backlight goes off but I can still see the screen text and buttons remain active. (the only thing running in the background is Spb Pocket Plus).
Click to expand...
Click to collapse
In my TyTN this problem seems to be connected to phone module. In fact when the phone module is inactive, my TyTN correctly sleeps. Moreover when it is in charge and when the backlight off timeout is set to greater time than sleep timeout, I can observe that the device correctly sleeps.
El_Mar1ach1 said:
I add point 3) e 4) :
3) Sometimes when alarm rings I can't see nothing... no Notification...just the ring...therefor I can't stop it!!!
4) It's happened two times... I set sound off... through comm.manager ( I'M SURE) and after a while when my friends called me the phone rang! It's strange don't u think?
Click to expand...
Click to collapse
this happened to me yesterday! Alarm ringing but no notification and no chance to turn it off!
After 3 hours the red led was still flashing and the problem was there...
Solution? Hard reset :evil:
nicolochi said:
El_Mar1ach1 said:
I add point 3) e 4) :
3) Sometimes when alarm rings I can't see nothing... no Notification...just the ring...therefor I can't stop it!!!
4) It's happened two times... I set sound off... through comm.manager ( I'M SURE) and after a while when my friends called me the phone rang! It's strange don't u think?
Click to expand...
Click to collapse
this happened to me yesterday! Alarm ringing but no notification and no chance to turn it off!
After 3 hours the red led was still flashing and the problem was there...
Solution? Hard reset :evil:
Click to expand...
Click to collapse
3) Can happen if you go and remove alarms from the notification queue, for example memmaid can be used to do this.
Or use check notifications - see my post here http://forum.xda-developers.com/viewtopic.php?t=60426&highlight=
I just resolved by mammeid. MUST have software
I had this same problem on my TyTN, also could be fixed using MemMaid - the old alarms stopped ringing after deleting the clock.exe entries in the Notification queue.
However, the alarms STILL aren't working ok, because any time I set a new alarm when it rings I don't get any notification so I can dismiss it, so it keeps ringing until I delete it again using MemMaid. Any idea of how can I fix this?
Thank you.
Marques said:
I had this same problem on my TyTN, also could be fixed using MemMaid - the old alarms stopped ringing after deleting the clock.exe entries in the Notification queue.
However, the alarms STILL aren't working ok, because any time I set a new alarm when it rings I don't get any notification so I can dismiss it, so it keeps ringing until I delete it again using MemMaid. Any idea of how can I fix this?
Thank you.
Click to expand...
Click to collapse
I deleted all the entries using MemMaid... then I soft-reset and now I don't have any problem using alarm! Notification appears again so I can stop it!
Marques said:
I had this same problem on my TyTN, also could be fixed using MemMaid - the old alarms stopped ringing after deleting the clock.exe entries in the Notification queue.
However, the alarms STILL aren't working ok, because any time I set a new alarm when it rings I don't get any notification so I can dismiss it, so it keeps ringing until I delete it again using MemMaid. Any idea of how can I fix this?
Thank you.
Click to expand...
Click to collapse
I have exactly the same problem on my 838Pro now (used to have this happened to me on my 818Pro as well. Didn't know what to do, so I hard-reset).
Marques, are you able to try what El_Mar1ach1 has tried, that is to delete all Clock entries using MemMaid and do a soft-reset? Create new alarm using Clock and see if you get any notification.
I could have tried that myself, but unfortunately my unit is in the service centre, and won't be getting it back until tomorrow or day after.
I have a good restore on my storage card that will bring this problem back for me to try when I get my unit back, so that at least if this happens again in the future, we will all know how to resolve it.
Yesterday wasn't working. Today I tryed again the same procedure and it's back to normal. Working again...
Meanwhile I installed PocketAlarm (http://pocketalarm.iit-bsuir.com/indexen.htm) and I'm starting to use it instead of the system alarm.
Do you guys know any other nice alarm applications to test it out?

Text Messages & TYTN II Wakeup

Hi all,
I've searched high and low for a solution to this and am desperate to have a resolution. My problem is when a text message comes in my phone wakes up and doesn't go back to sleep/standby. I have disabled all notifications when an SMS arrives, but still the phone ignores this and wakes up the screen and doesn't disable it again (quickly draining the battery).
Does anyone have a solution for this? A registry tweak/software package?
Thanks
Why don't you set it up so that when the phone is idle, it turns itself off? THen if you get a text, the phone wakes, but will go back to sleep assuming it is idle.
I do
It already has that setting -- 60 seconds = power off, it seems to not work after an SMS has come in.
I also have the phone in my pocket so it's never "idle" for 60 seconds because it generally touches the screen, etc in the pocket.... but even when on the table the backlight stays on after SMS...
VERY FRUSTRATING
No idea?
It would be enough if the SMS-Income sounds, but no wake!
Once i tried automatic screenlock after wakeup, but this is annoying too.
I'd like to know a trick how to disable wakeup after SMS.
Maybe s2u2 could solve this for you.

new sms doesnt alert until i power on from suspend

this is wierd... sometimes, when the phone is on suspend, the led is flashing for new sms.. but no sound is heard..
the moment i click power on, the screen comes and the sms "arrives" with the audio alert...
only sometimes... is this a bug? anyway to solve? thanks
anyone pls?
Im having a similar issue with my TD2. When the phone is in sleep mode receiving a text message won't vibrate even though the profile is on vibrate. Only calls will
elmalote said:
Im having a similar issue with my TD2. When the phone is in sleep mode receiving a text message won't vibrate even though the profile is on vibrate. Only calls will
Click to expand...
Click to collapse
ah ok... anyone who solved this pls help...
install HD tweak and enable "wake up on new sms" function.
dossy33 said:
install HD tweak and enable "wake up on new sms" function.
Click to expand...
Click to collapse
ok.. but will it cause my deivce to power on.. and hence risk accidental touches?
not if its locked by holding down the right hang up key.
dossy33 said:
not if its locked by holding down the right hang up key.
Click to expand...
Click to collapse
thanks.. btw u have any idea why is it like this? is this a bug?
this topic has been discussed before:
http://forum.xda-developers.com/showthread.php?t=499582
so far, this method werks but not for long..
method: Settings---> Sounds and Notifications-----> new SMS----> Disable Alert, Vibrator, Falshing Light !!! Basically disable everything and press OK to return to the touch FLO home.
After that, Go again and enable the SMS notification with or without Vibration as you like and it will work !!!
I had the same problem when i used the nueDynamicClock...
Now, it seems to work well (with the version 1.3)

[PROBLEM] wake up unexpectedly at sleep mode

Hello,
I've been using Touch HD at least 7 months. When i first bought i never get this issue but lately my phone wakes up when in sleep mode even i dont press power on/off button.
First i thought it's the software problem so restore my stock rom( 1.14 German) but no luck same problem happened. i tried many cooked/original rom again no luck.
So it must be hardware problem, then begin when it happens this wake up issue. Generally after sleep mode actives 2-3 seconds later it wakes up.
and i realized that it wakes up when the stylus is in. When phone is in sleep mode and stylus is in if you press the case where the stylus is, it wakes up,
(not all the time) but when stylus is out nothing happens .
anyone has the same problem, at least have a solution for this.
Can we disable when the stylus is out the phone is wakes up setting?
I'm using s2u2 program to unlock phone, so it doesn't call anybody at my contact list by mistake...
Hey LostXP,
I've got similar problems while using S2U2 - it never happened before. I think this must be a Software-Problem generated by S2U2... anybody out there having the same probs.
My HD wakes up while beeing asleep, trying to create voice-orders or initiating video-calls...
Find the mistake... I used the standard Headset which tried initialise calls because of pressing the call-button without recognizing it!
Broetchen said:
Hey LostXP,
I've got similar problems while using S2U2 - it never happened before. I think this must be a Software-Problem generated by S2U2... anybody out there having the same probs.
My HD wakes up while beeing asleep, trying to create voice-orders or initiating video-calls...
Click to expand...
Click to collapse
Problem not the s2u2, s2u2 solves the problem temporarily
up!!!
anyone???

Turn off backlight when get a message

Hi Guys,
My HTC TOUCH HD's backlight turns on everytime I receive a text message, it is really annoying as i sometimes get a message when im out and about with my phone in my pocket or bag, and it starts pressin lots of buttons because the backlight it gets turned on.
Is there any way of changing the settings so that it does not come on when i get a message? it never used to do this until i upgraded the ROM a few days ago.
Thank youuu!
Get HD Tweak, there is a setting which lets you keep the screen turned off when receiving SMS.
linky
Hey, i tried it but theres no setting that does that :s it disables the notification that usually comes up but not the backlight switching on... any other ideas??? :'(
so 'wake up on New SMS' doesn't keep the screen off when you disable it?
woohoo!
OOOOOOOOOOO!!!! its workin now! woohooo! thanks for clarifying! what happened was i installed it and that option was alredy disabled, so enabled it and then disabled it again and then it started working, dno why it didnt work in the first place :s but it works now so its al coooool thanks!!!

Categories

Resources