Hello,
I've been using Touch HD at least 7 months. When i first bought i never get this issue but lately my phone wakes up when in sleep mode even i dont press power on/off button.
First i thought it's the software problem so restore my stock rom( 1.14 German) but no luck same problem happened. i tried many cooked/original rom again no luck.
So it must be hardware problem, then begin when it happens this wake up issue. Generally after sleep mode actives 2-3 seconds later it wakes up.
and i realized that it wakes up when the stylus is in. When phone is in sleep mode and stylus is in if you press the case where the stylus is, it wakes up,
(not all the time) but when stylus is out nothing happens .
anyone has the same problem, at least have a solution for this.
Can we disable when the stylus is out the phone is wakes up setting?
I'm using s2u2 program to unlock phone, so it doesn't call anybody at my contact list by mistake...
Hey LostXP,
I've got similar problems while using S2U2 - it never happened before. I think this must be a Software-Problem generated by S2U2... anybody out there having the same probs.
My HD wakes up while beeing asleep, trying to create voice-orders or initiating video-calls...
Find the mistake... I used the standard Headset which tried initialise calls because of pressing the call-button without recognizing it!
Broetchen said:
Hey LostXP,
I've got similar problems while using S2U2 - it never happened before. I think this must be a Software-Problem generated by S2U2... anybody out there having the same probs.
My HD wakes up while beeing asleep, trying to create voice-orders or initiating video-calls...
Click to expand...
Click to collapse
Problem not the s2u2, s2u2 solves the problem temporarily
up!!!
anyone???
Related
My phone is always waking up for odd reasons (AVRCP commands, switching in and out of roaming, etc...), and I can't seem to get the darned thing to stay OFF.
Music A2DP streaming is the biggest deal to me, because not only will the device wake up when I press a remote command (on my AVRCP headset), it will also keep the device backlight on indefinitely. This is clearly shortening my battery.
I tried Slide2Unlock, and have it set to shut off the display if no activity for 5 sec., but the problem is that Slide2Unlock appears to not notice when it is woken up, and just sits there without turning the screen back off again! (a simple screen press brings Slide2U back to life, and then it will toggle the screen... but this defeats the purpose!)
There must be SOMETHING I'm missing here... doesn't anyone else have this problem???
I have 2 things for you. The first, is if you're using WM6 that's a known issue and unchecking the today timeout in start-->settings-->today-->items tab should solve most of your problems. The second is a little program that I found (not sure where at , but it might have been on here) called screen off. Install it and then set it to a hardware button and it will allow you to turn just your screen off whenever you don't need it on.
Maybe it depends on the player you're using? With Coreplayer, my phone's screen just flashes on and off quickly when it receives an AVRCP command.
Still doesn't explain the roaming thing though.
xeno1 said:
I have 2 things for you. The first, is if you're using WM6 that's a known issue and unchecking the today timeout in start-->settings-->today-->items tab should solve most of your problems. The second is a little program that I found (not sure where at , but it might have been on here) called screen off. Install it and then set it to a hardware button and it will allow you to turn just your screen off whenever you don't need it on.
Click to expand...
Click to collapse
Yes, I'm using WM6 on a HTC Titan (Sprint Mogul).
I don't currently timeout to the today screen, but I don't see how that would cause my problem really- I've heard people mention that before, so can anyone explain what difference that would make?
I already have a shortcut to screen toggle (wrote my own MortScript to do it). That's not a problem anyway since every media player can assign a button to toggle the screen- The problem is that it keeps turning the screen back on when a button is pressed no matter how many times I toggle!!
Plastriq, I've heard that coreplayer does that... that's how they deal with this problem. They're the only ones that have addressed it as far as I know, and I'm not about to pay for their app when I already have TCPMP and WMP for free.
I just can't believe that there haven't been more practical ways around this yet!
Anyone experienced the same issue? After using the phone I press the power button but after few secs. the screen goes on again and its annoying.. Especially when I take out my HD from pocket and I see it. It was happening on stock rom now on Duttys. Could it be hardware issue with the button?
NikPraskaton said:
Anyone experienced the same issue? After using the phone I press the power button but after few secs. the screen goes on again and its annoying.. Especially when I take out my HD from pocket and I see it. It was happening on stock rom now on Duttys. Could it be hardware issue with the button?
Click to expand...
Click to collapse
Try it without stylus inside. maybe faulty stylus thats what happened to me.
I have exactly the opposite, I switch it on, and a second later it switches off again!!
Faulty stylus? Do you mean that I try using the other one or?
When we´re already talking about the stylus, I noticed that sometimes when I pull it out my HTC doesn´t wake up from standby.. That didn´t happen on my Diamond.
The only solution I found so far is using the device lock after 0min. so I could avoid accident calls in my pocket. But there is the annoying PIN nr. every time... :/
Today I noticed, the device keeps going out of standby cca. every 10-20mins. Bad. The screen turns on and after few secs off..
mine too, every 10/20 mins.
will be some software doin it i think.
Hey all i installed BSB tweaks on my phone and i think i have disabled the lock feature on the phone when pushing the hangup button (hard button). To lock the phone i need to click start---then lock on the touch screen. bit of a pain as i would like to do it with the hard hangup button. when i push it instead the screen turns off, then if i push a button it wakes. can anybody help please. i tried searching the forums but couldnt find anything on it. cheers.
This happened to me too, but it seems like (at least that's how I recall it) the last thing I did before this happened is setting an alarm, turn off the phone (or maybe not, I am not sure) and when I dismissed the alarm, the "off" button started to just turn off the display isntead of locking the device
theemed said:
This happened to me too, but it seems like (at least that's how I recall it) the last thing I did before this happened is setting an alarm, turn off the phone (or maybe not, I am not sure) and when I dismissed the alarm, the "off" button started to just turn off the display isntead of locking the device
Click to expand...
Click to collapse
Hey i also had this problem afer installing BSB Tweaks, it hink all you have to do is when the phone it on hold the power key stil it comes up with the options to power off or lock and that....then simply select lock device and it should go back to normal!
First I noticed that my Lock button doesn't work anymore. When I press it, nothing happens. I thought it's a bug or something so I flashed different Roms but the problem still exists...
it is not a hardware problem, because i can hard reset my device normally.
When the phone goes to stand-by mode, it stays off for one second and then it turns the screen and backlight back on. That runs my battery out quite quickly.
I have searched forum for this problem, but did not find any answer.
Is there a solution for this??
the same problem here!!!
have someone an idea?!
I've had the same problem with my Omnia i8000.
But my Phone will come back on only if I am listening to Music.
Does this happen to you while listening to Music ? If Yes, then just turn the volume one step down. Thats a workaround I've found for my phone.
has anybody fixed this issue on their omnia pro yet?
i am facing the same issue, the screen is always on as the lock key doesnt do anything....the only time the screen shuts off is when using the touch music player after 60 sec.(backlight setting when phone not on external power)......screen turns on when the song ends.....hard reset to factory settings doesnt fix the issue......plz help if u hv a solution figured out....thnx
SangisettyNaresh
Amazing... You are my lifesaver...I have been facing this problem since last one month.
Your idea worked for me but can you tell why this problem occurs? and this is a temporary solution...Is there any permanent solution to this problem?
Greetings to all. I had this problem for a while. I solved it with 2 programs - the first is AEButton and the second Smart Lock. I mapped the W&L button to "lock device"(AEButton). After that going to SmartLock ticked: Lock screen and then stand-by. In this way I used the W&L buttons as lock key. Worked for me, hope it works for you!
P.S. I am using custom rom without the touchwiz interface, I dont know if that makes any difference!
EDIT: It fixes the issue partly...the screen pops out every 20 seconds or so.... Seems to me it is a hardware problem. Flashing with different ROMs doesn`t seem to work.
Hello all,
I've been using ZUK Z1 for just about a week now and everything was fine until a couple of days ago when I could not unlock the phone after a call - the power button and the home button turned the screen on for a split of a second and then the screen went off again without reacting to any taps. I had to restart the phone by pressing the power button + the volume down button. I tried to reproduce the issue, but did not succeed.
Yesterday, I had the same issue twice and then I finally got it how to reproduce the problem The main condition seems to be ending the call when the screen is off. That can be achieved by holding the phone close to your ear when the call it ended by the other party or ending the call by pressing the power button (you need to turn on that setting beforehand) again while holding the phone close to your ear.
Another guy on another forum wrote that had experienced the same issue once and yet another guy mentioned that there was such an issue with Cyanogen on OnePlusOne, but it was fixed in one of the updates.
I'm currently on 12.1-YOG4PAS3OH and I'm not sure whether it is a Cyanogen issue alone or an issue caused by interaction of Cyanogen and some of the applications installed. I'm inclined to believe that it's the latter, otherwise there would be a lot of people who ran into the issue.
This weekend, if time permits, I'm going to try uninstalling the applications one by one to find out whether any of them contribute the issue, but maybe some of you have already done some investigation or know how fix the issue. I would appreciate your input.
Thanks.
Hi there, i am facing the same issue since two days now
First i am unable to come up with the physical home button issue and now there is this new issue. The phone does not respond after a call and the screen remains off and does not respond to any touch (double tap) or even the power button and home button pressed. I had to take the mobile into the recovery mode via home buttons power button and volume rockers. Is there any possibility of this getting fixed. I think i made a huge mistake purchasing this phone.. Slowly getting into problems one by one.. First the physical home button issue then this screen off issue. Checking for updates daily but seems like ZUK officials and Cyanogen are sleeping! Highly disappointed!!!!
In the meantime, I uninstalled most of the applications and the issue was still there Then I tried to play with different settings and it seems I have nailed it. After disabling turning on the screen by double tap (I'm not sure how the setting reads in English, I'm using the Russian interface), I cannot longer reproduce the issue.
Sydarij, could you, please, check whether the setting is on in your case and, if it is, turn it off and try to reproduce the issue with the screen?
ingtrans said:
In the meantime, I uninstalled most of the applications and the issue was still there Then I tried to play with different settings and it seems I have nailed it. After disabling turning on the screen by double tap (I'm not sure how the setting reads in English, I'm using the Russian interface), I cannot longer reproduce the issue.
Sydarij, could you, please, check whether the setting is on in your case and, if it is, turn it off and try to reproduce the issue with the screen?
Click to expand...
Click to collapse
Do you mean after turning off the tap to wake option on your ZUK, you are no longer facing such issue?
Sydarij said:
Do you mean after turning off the tap to wake option on your ZUK, you are no longer facing such issue?
Click to expand...
Click to collapse
Yes, that's what it seems. With the option turned on I could reproduce the issue (just 1 or 2 tries were needed), while with the option turned off I could not reproduce the issue at all.
ingtrans said:
Yes, that's what it seems. With the option turned on I could reproduce the issue (just 1 or 2 tries were needed), while with the option turned off I could not reproduce the issue at all.
Click to expand...
Click to collapse
After turning off this feature, the device unlocks by itself without me waking it up. Turning the feature off doesn't seem to help buddy!
Sydarij said:
After turning off this feature, the device unlocks by itself without me waking it up. Turning the feature off doesn't seem to help buddy!
Click to expand...
Click to collapse
This seems to be a different problem. How the option for preventing accidental wake-up is set? (It's just below the double tap option. )
In any case, one owner on another forum complained about the accidental wake-up issue despite the setting was on, but he meddled with the firmware before that...
ingtrans said:
This seems to be a different problem. How the option for preventing accidental wake-up is set? (It's just below the double tap option. )
In any case, one owner on another forum complained about the accidental wake-up issue despite the setting was on, but he meddled with the firmware before that...
Click to expand...
Click to collapse
Yes, the accidental wake up is set yet the issue cannot be resolved. Any other way you can resolve this and prevent the issue from reproducing? In my opinion, ZUK and Cyanogen officials are asleep after launching their new flagship. Dont see any updates coming from them since last 2 months. highly disappointed with this!
Sydarij said:
Any other way you can resolve this and prevent the issue from reproducing?
Click to expand...
Click to collapse
No idea. The solution I found seems to work well for me, at least I have not had any issues since I applied it.
Please turn on adaptive brightness. Issue will be resolved
ingtrans said:
Hello all,
I've been using ZUK Z1 for just about a week now and everything was fine until a couple of days ago when I could not unlock the phone after a call - the power button and the home button turned the screen on for a split of a second and then the screen went off again without reacting to any taps. I had to restart the phone by pressing the power button + the volume down button. I tried to reproduce the issue, but did not succeed.
Yesterday, I had the same issue twice and then I finally got it how to reproduce the problem The main condition seems to be ending the call when the screen is off. That can be achieved by holding the phone close to your ear when the call it ended by the other party or ending the call by pressing the power button (you need to turn on that setting beforehand) again while holding the phone close to your ear.
Another guy on another forum wrote that had experienced the same issue once and yet another guy mentioned that there was such an issue with Cyanogen on OnePlusOne, but it was fixed in one of the updates.
I'm currently on 12.1-YOG4PAS3OH and I'm not sure whether it is a Cyanogen issue alone or an issue caused by interaction of Cyanogen and some of the applications installed. I'm inclined to believe that it's the latter, otherwise there would be a lot of people who ran into the issue.
This weekend, if time permits, I'm going to try uninstalling the applications one by one to find out whether any of them contribute the issue, but maybe some of you have already done some investigation or know how fix the issue. I would appreciate your input.
Thanks.
Click to expand...
Click to collapse
Hi! I'm facing the same issue for the last 3 days. I felt everytime there is any moisture of sweat on the ear piece the phone hangs and doesn't get unlocked.
Will try shutting the double tap options. Hope it works! This is the first time I've brought anything in the launch sale without reading reviews. Hope I don't regret this.
sir when call come rintone accor but calling display doesn,t show
when i press phone icon in menu then it shows
phone is lenovo zuk z1
screen freezes during/after call !!
did you solve this problem?
i too have posted the same problem here ..
any sugesstions?
i am facing a black screen while calling and receiving calls on my zuk z1 .. any solution? and where do i find the proximity setting in my settings?