Did anybody have successful wireless data connection with DUN on the Athena100 (htc advantage x7500)?
I have WM6 Pro and tried the BT_DUN.cab and the WM6_DUN.cab, but without any result.
Nevertheless this works perfect on f.e. Touch (P3450), but not at all on Athena 100.
I think I have read and tried all what was published about this DUN-problem with WM6 and what causes problem to connect with TomTom Go or others that only use DUN.
Because now, after weeks searching and looking I cannot find any solutiuon, I hope somebody has experience with this problem and can help me.
Thank you.
Related
Hi all,
I have a big problem with my Prophet and its WIFI, I didn't manage to connect to anything.
First, I had the Orange French rom.
When i tried to connect to my hotspot with WPA protection, although the prophet could see the hotspot, try to connect to it, connection seemed to stay blocked... status was "connected to network" but no IP given (DHCP is activated on my hotpot).
Then I read that WPA wasn't well supported by WM5 so i put a WEP encryption on my hotspot. This time the prophet connect and an IP address appeared in wifi sttings, but connection reseted all the time... connected, not connected, connected again, not connected...
impossible to stabilise the connection.
I tried on another hotspot without encryption, and same thing, connection reseting again and again...
Now I've just tried with the last dopod rom which I've found right here, but no change, the wifi connection is impossible.
I'm kinda lost, dunno what's going wrong with something that should work without any problems...
Does someone ever seen something like this?
Could it be a material failure?
Thanks a lot for your help!!! :wink:
Cedrick
It was a hardware disfunction, replaced today with another prophet which works fine
New Prophet Revision out ?
Hello,
I Just got my XDA Neo (o2Germany) 2 days ago and because i´ve read about the Dopod Rom beeing faster, i upgraded immediatly.
The Problem now is the bad Wireless performance, i never get a good connection - Still if i am right next to the Router/Accesspoint...
Did i understand you right that this is a Hardware failure ?
Can I correct this with a different Rom ?
The Problem is that i cannot give it back to o2 now, because of the Dopod Rom - Maybe i have to try the Downgrade Method presented yesterday...
Can you give some more information about Wlan performance ??
THX !!
Hi,
First of all, did you try the wireless connection with your first original rom?
And what do you mean by "never get a good connection", could you explain that point? does the prophet connect and disconnect?
You must know that wifi performance are kinda poor on this device from what I heard and what I saw... you'll never get something like your laptop for example.
But I'll do some test at home and see how it's going now that I can really connect (I never could before, so I never really tried :wink
Anyway, in my case it was clearly hardware as I have the problem on my Orange rom, then I had the same problem with the Dopod one.
Now I just received a new prophet, and it worked fine on the first try with the Orange rom...
I'd like to try with the Dopod again but until they find a way to downgrade, i won't take the irsk... or maybe yes, i dunno
First of all: Thank you for answering so quick !!!
Yes i can connect, and i can also Use Opera, Internet Explorer and so on...
But i think it is really slow, i never got the connection far away from "poor" ...
Even the original o2 Xda neo rom was not better...
I will have to try some different Roms when downgrading will be made possible i think.
you said your o2 rom wasn't better? is that right?
it is slow for me too (right now i'm on my prophet over wifi)... but i don't think the rom would make a big difference, i mean, the dopod us supposed to be the fastest...
I think the device itself have a poor wifi...
could you confirm that your o2 rom was as poor as the dopod or did i get it wrong?
maybe you could also test your connection speed too.
If you tell me how i can test the Connection, i can do for sure !
I did not "really" test the o2-rom, i started the XDA and after Windows was ready, i saw it is quite slow in the menue - wireless was detected and i connected but signal quality was exactly the same bad thing i have now.
Edit: TXRATE is "Auto", after 2 Minutes or so it drops to 2Mbps
408 Kb/s is what I get when I run a basic speed test.
that ain't bad... and I t ink pocket IE is quite slow too...
We are not on a PC after all, the proc speed also affect the connection speed.
I think that it's already nice to have wifi on a little device like this
I`ll do a DSL-Speedtest, i think this is what you did, too ?
EDIT:
Downloading is very fast can you give me a clue wehre i can exactly see the speed?
exactly
Mhm, after a new Hardreset a interruped the *.cab file installs with the first reboot - The System is much faster now. The Wireless Quality is not better but i can Download and Phone via Skype without any Problems and interruptions.I Think my System had an overload, now it is fast and it works.
I will test the wireless range tomorrow...
Hey guys,
I have searched for this problem on the forum but I can't find a solution. The problem I have is that my Bluetooth is not working like I would like it to:
When trying to connect from my TD2 to my pc (xp) / laptop (vista) I get the message:
Cannot connect
Your device hasn't been able to connect with 'pc-name'. De connection failed or the password is incorrect.
(I get it in dutch... so if my translation isn't the same as in the english version you know about it).
When using the pc / laptop to connect to the TD2 I get a screen where I can choose between two bluetooth services:
- Dial-up Connection
- Network Access Point
... These are the only two. When I use my old phone I can also use a Serial port connection (and even a few more).
The purpose of the bluetooth connection is to be able to synchronize my contacts with my Microsoft Outlook 2007.
Can someone please help me with this problem? I have already tried a few things, like soft- and hard reset. Updated the ROM, etc. But it is still not working. The only thing which DOES work is connecting the TD2 to my radio in my car...
Thanks in advance
Hi robje,
Ive got same problem with you.. but i managed to solve it ..try enable receive all incoming beams.. u can find it at all settings --> connections --> beam --> then check " receive all incoming beams"... good luck.....
Thanks for the quick help!
I already enabled this setting, but I still have these problems...
I've got exactly the same problem with my bluetooth,are you still using the stock ROM? I've currently got energyrom's standard2.5 installed so I thought that it maybe WinMob 6.5... My wife's phone is fine and she's using the stock ROM. I'm going to go back to HTC's stock ROM, so I'll give you another update after I've done this...
One note to add.. I've seen that on my older Diamond, the bluetooth COM ports menu shows "New outgoing port", whereas my new Diamond2 shows nothing on the same menu...
Update... I've flashed my Diamond2 back to the original HTC ROM and bluetooth is now working correctly. So it looks as though the problem is probably with WinMob 6.5...
Can anyone confirm this at all???
I think I am just using the Stock ROM (as I haven't installed any other). I am also using WM 6.1... as 6.5 is not yet available for the TD2 (if I am correct)...
Robje113 said:
I think I am just using the Stock ROM (as I haven't installed any other). I am also using WM 6.1... as 6.5 is not yet available for the TD2 (if I am correct)...
Click to expand...
Click to collapse
The retail version isn't but a lot of the ROMs on here have been done with beta versions of 6.5 (mines on build 23016)...
Anyway,I've flashed back to my cooked ROM and bluetooth still isn't working correctly. I've been messing around with the "advanced configuration tool" and found that OBEX was disabled. However once I turned this on, it still wouldn't work correctly...
Yeah I also found the OBEX using Advanced Config. But that didn't seem to matter... I hope anyone knows a solution for this, because it's really annoying! I have contacted the HTC Helpdesk... but didn't get much help. After giving all details about the problem they send me a manual of how to turn on the bluetooth radio on a mobile device :|...
Have you tried reflashing with the latest update from the HTC website?
This problem is getting weirder... I've now found that I can send files from my TD2, it's just the recieving of them that won't work. So I think it must be a possible compatibility issue between WinMob 6.5 & the older version on my TD...
Has anyone got an idea to solve this problem...?
No intention of being a smartass though...
Have you checked the box "visible"?
magnus66 said:
No intention of being a smartass though...
Have you checked the box "visible"?
Click to expand...
Click to collapse
Hey Magnus,
I do have checked that box and it's visible. I have done all there can be done (the easy way) on the TD2, but all settings are correct. I can also see a list of available bluetooth services on the phone, which also describes the one I need. But when I then try to connect my pc with my phone, I can only choose on my pc between:
- Dial-up Connection
- Network Access Point
Only those 2... when there are much more available according to the list on the phone...
Have you tried to connect to your "old phone" as you mentioned?
Sending receiving between those phones
Hello.
Ever since i had this 3600 that my wifi never seemed to be working smoothly...
I don´t seem to be able to connect to my wifi wireless at home nor to any other wireless network that needs a password...
I used to have the default WM5, but recently updated to WM 6.1 using one custom ROm dowloaded from here...
I´ve tried changing my wireless to broadcast using 802.11.g, changin in HTC the wireless power options and so on, but i´m always stuck with this problem...
Does anyone have any idea what the problem might be or experienced anything similar?
Thanks in advance!
On some cooked ROMS not all the features are working. You have to choose a good one or give feedback to the ROM cooker about those problems so he can fix it.
For example I had one WM6.5 where bluetooth and infra-red don't worked. Now I have one where videocalls don't work. I'm still in the quest to find a perfect one.
Hi
I have an HTC Wizard (an O2 Mini S but now unlocked and running WM 6.5)
The WiFi connects to the hub when all security is taken off both devices - some problems with finding pages in IE but the Wizard is shown as connected
However I cannot get it to connect whenever I add any encryption.
Any ideas would be most welcome.
The same thing happened under the original WM 5
Thanks
Problem solved
I cam across WiFi Monster when looking about for solutions, downloaded it and it worked really well. Found all the networks locally and worked immediately when the wireless key was entered. No problems so far using IE.
Hope this can help anyone else having WiFi connection difficulties
Hi,
Three days ago I updated my Elfin for Windows 6.5 (with a ROM cooked for Elfin) and since I have an awkward problem that I couldn't resolve after reading many posts...
I can connect on WIFI without any problems but then only IE can access to the web... Whatever over programm say me that the connection doesn't exist.
Does anyone know how to solve this ???
Or have some tip....
Thank you very much
I suggest you ask this question in your cooked rom's thread.
Thanks for the suggestion
but I found out why I couldn't connect with Wifi. It was because of the proxy indicated in the registry for Wifi connection. Since I removed it its working great
Still I don't understand why IE was able to connect ??? That's not too important since the connection is now working.