I tried to flash my iPAQ 6910 with the official rom update from HP Hompage
But it failed
Now the iPAQ 6910 shows:
USB
HP (logo)
vG. 39
When it's turned on.
Has anyone a idea how this problem can be fixed?
Hangart said:
I tried to flash my iPAQ 6910 with the official rom update from HP Hompage
But it failed
Now the iPAQ 6910 shows:
USB
HP (logo)
vG. 39
When it's turned on.
Has anyone a idea how this problem can be fixed?
Click to expand...
Click to collapse
yeah..add me on yahoo messenger (cata_cata_cs) or skype (cata_i0an) best if you add me to skype and speak english a little.
i have the same symptoms on my 6910, wont get past the loader screen with 1.00.00 and 1.13uk in red in bottom left. where do i find instructions on the process of flashing the rom and what is the best\most stable rom to use (english)?
kernowmike said:
i have the same symptoms on my 6910, wont get past the loader screen with 1.00.00 and 1.13uk in red in bottom left. where do i find instructions on the process of flashing the rom and what is the best\most stable rom to use (english)?
Click to expand...
Click to collapse
i have a 6910 which i bricked some time ago and really need advice and software to reflash. looked at link above and it is in german but ruu says wrong version i have 6910 with wwe as language.
help....
Try google for UNI_ExitBootloader.exe maybe it will help if you are actually just stuck in bootloader.
try to update again
I was stuck in that too, then I used my cradle/usb connected with the charge of the phone and installed again de ROM, it solved.
Related
Hello,
I wanted to upgrade my MDA Compact 2 to AKU3.
I started the update tool, like described in the forum here. The progressbar
on my MDA screen appears and when 95% are reached the update tool give me the ERROR [302]: UPDATE ERROR.
The reset of my MDA gives me only the 3color Boot-Loader Screen with the following Numbers:
IPL 2.06.0001
SPL 3.08.0001
and RUU in the right top corner.
Has anyone an idea to solve this problem, an downgrade to the old AKU2 can also not be done, because i get always the error about an wrong vendor ID.
I read a thread, to unlock CID, but this is not possible in Bootloader Mode, or?
thanks
Michael
SOLVED
Hello,
I solved my problem!!
I installed the Radio ROM Upgrade:
ftp://[email protected]/Uploads/Prophet/Prophet-roms/Radio_ROMs/Prophet_G3_G4_RadioRom_v2.69.21.exe
and it works.
There is maybe at 95% the Radio ROM Upgrade, and this worked not with the AKU 3.3 Image.
greets
Michael
I have the same issue. It's asking me for a password when I click on your link.
@optical, read the FAQ
@mwulz, thanks a lot ;-)
I got the same Problem. Does the link also work with the T-Mobile MDA Vario?
I don't want to crash my MDA Vario...
Thanks in advance
No, it won't help you. It's the radio rom, so it will not fit your wizard. You can try to flash any radio rom for wizard or any splash.
@mwulz
Thanks to you, I had the same problem (95% Error) and my mda compact II stoped working. With your tipp it works again!
Markus
mwulz said:
Hello,
I solved my problem!!
I installed the Radio ROM Upgrade:
ftp://[email protected]/Uploads/Prophet/Prophet-roms/Radio_ROMs/Prophet_G3_G4_RadioRom_v2.69.21.exe
and it works.
There is maybe at 95% the Radio ROM Upgrade, and this worked not with the AKU 3.3 Image.
greets
Michael
Click to expand...
Click to collapse
I have the same error on my Charmer with the AKU3.3, downloaded from the German T-mobile HP. Now I want to solve the problem with your described Radio-Rom but it is not downlodable from ftp://[email protected]/Up...adio_ROMs/Prophet_G3_G4_RadioRom_v2.69.21.exe !! What can I do??
it is downloadable, just type in password "xda".
thanks.
my charmer is in life again
Hi Masters, My Qtek 9100 after appliying WM6.Crossbow.WWE.HTC.Wizard.v5.2.660-sck update ROM procedure, the device remains in the Three color screen with the codes:
IPL 2.26.0001
SPL 2.26.0001
GSM (not appear).
1?
Have some of you the original ROM for Qtek 9100, or where I can find a fix?
Please HELP ME, please.
Greetings for Caracas, Venezuela.
Well, your WIZARD is not DEAD - just starting in BOOTLOADER mode. Looks like you did not flash it right! SOLUTION: Flash it again - in case the WM6 won't flash try another ROM (best thing: your shipped one!).
Since you'e a QTEK owner you can register at the QTEKs homepage with its IMEI number (you can find it under the battery on the label) and download the latest ROMs ...
Still remains in Bootloader Mode
Hi June2003, I try to reflash the phone many times, but the status is the same, one of the thinks that I concern is that the Rom Update Utility ver 2.5.2 not show me the current version of my Qtek (the version the lastest ROM in Qtek site doesnt work) and the upgrade version.
Before the execute the process, I read some posts into this forum that Qtek 9100 aka Wizard could be upgrading from WM5 to WM6, and this is the reason about my phone is freeze.
Any advice......
Best Regards, Ulises.
The word for today is "wizard love".
Good Luck
My HTC got bricked after succesfully updated to WM6 with the O2-ROM.
But then I wanted to go back to WM6_black_blue in english.
Now I get invalid ceritificate error when I try to flash from SD-card, and wrong vendor ID when I use the RUU.
Now I'm looking for the original HTC P3300 Swiss German WM5 ROM.
Has anyone an idea where to get it?
htc p3300
HI i have xdaorbit-windows-update germanian
Thanks, but I've got that one, and this won't start anymore, that's why I'm looking for the HTC_P3300_1.xx.xxx.x_GER (Switzerland) ROM.
Any other than this won't be useful, except the WM6 from HTC...
htc p3300
thray this : http://forum.xda-developers.com/showthread.php?t=312594
I've got the finally the correct rom
Sometimes the Provider are much better than the manufacturer's
http://download.sunrise.ch/downloads/manuals/qtek-windows/P3300_softwareupdate_GER.zip
It's worked!!!
Thank You very much for original P3300 German ROM. My Artemis is alive now, after more than month, after unsuccessful upgrade to WM6 WWE.
For me it doesnt work
I have a swiss german p3300, bricked.
The bootloader mode works, but the installer shows: Fehler 260 : Verbindung (Error 260: Connection)
The phone is in bootloader mode and shows the little usb sign at the left side..
Can anybode help me?
Thanks for reading =)
Maybe!
Use this Link: http://forum.xda-developers.com/showthread.php?t=311403
It worked fine for me as long as I didn't use Windows Vista.
The USPL rom update doesn't work in boot-loader mode
hugeman66 said:
Sometimes the Provider are much better than the manufacturer's
http://download.sunrise.ch/downloads/manuals/qtek-windows/P3300_softwareupdate_GER.zip
Click to expand...
Click to collapse
Hello, What version ist this?
is this newest Original German HTC ROM?
Has anyone used this? how ist it?
Does Alles work? TOMTOM and HomeZone for example?
Thanks
Tim
Please help me, I need ROM 1.11.0000 German. I can't boot to Windows Mobile, only see Logo O2 then XDA Orbit has a black screen. I only can run Boot Loader.
Thanks all.
help me, Pleae
When you get into BootLoader why don´t you flash with official HTC WM6 ROM?
I flashed Rom WM6 Ship German from HTC successful but it's only stop at O2 Logo and auto turn off screen to black. . Please help me. Thanks all.
The update was successfull?
Try a reflash?
yes, i tryed twice but can't boot to WM only stop at Logo O2 and atuo turn off. If you have ship rom German, you can help me, thanks you
You flashed your device with HTC WM6 ROM... and your Bootscreen shows the O2 Logo...
hm...so the update was not succesfull...
Have you tried the official O2 ROM?
http://www.o2online.de/nw/support/downloads/software/xda/xdaorbit/index.html
I Flashed rom from site O2 - Online German but it's only can boot to O2 Logo and auto turn off screen to black. Please, anybody can help me. (
hieupc said:
I Flashed rom from site O2 - Online German but it's only can boot to O2 Logo and auto turn off screen to black. Please, anybody can help me. (
Click to expand...
Click to collapse
just try and run USPL first then flash the Rom [NEW ROM]: Artemis Vanilla 1.0 WWE - 5.2.1908 (Build 1850)
this should solve your problems.
i only can run Boot Loader, so i can't use USPL to Unlock CID
help me, please
please help me (
Hello guys,
I am facing a strange behaviour of my ipaq when shutting it down.
My device is a german one, updated to the latest FW and flashed with several english ROM versions (among others pdaclan and keyx).
The shutdown window now reads a german and a cyrillic message, one below the other.
Any hint to get rid at least of the cyrillic message part.
An english message would also be fine
Thanks in advance
My Data:
HP IPAQ 614C
ROM: WWE 21054 M2D v0.9 - WM6.1 by sergiorus/keyx
ROM OS: 1.01.04
Bootloader Version: MP-1.01.05
FW: 0.89
XIP Version: 1.0.0.0
P.Code: FA992AA#ABD
I'm using HP ipaq 6965
Hi! I have never ever experienced this...The best thing you can do is to contact HP~ Sorry~ I can't give u a hand
collectingit said:
Hi! I have never ever experienced this...The best thing you can do is to contact HP~ Sorry~ I can't give u a hand
Click to expand...
Click to collapse
Won't contact HP for an unsupported OS
My question: What part of the flash is responsible for the shutdown message?
The bootloader?
I would reflash that to get rid of this message/language mix.
Thanks for any helpful hint