Database Users

QTEK ROM Upgrade / Urgent

Updated rom's to version Radio 4.16 and Rom 3.15.15
URL: http://julia.online.o2.nl/xda_downloads/xda_software1/RUU_ENG.exe = ROM upgrade
URL: http://julia.online.o2.nl/xda_downloads/xda_software1/RSU_ENG.exe = RADIO upgrade
Hello i was wondering if the above ROM updates will work on my QTEK 1010:
ROM Version: 3.16.13 ENG
Radio Version: 3.19.01
I mean anyone tested if before or managed to upgrade his QTEK with the above ROM versions from O2 and were there any complications!!
:?: :?: :? :?: :?:
Thanks

Yes I did and it worked fine. I have it running on T-Mobile MDA, Qtek 1010 and Eurotel dataphone (rebranded Qtek). No problems.

I tried to upgrade and got the following error:
----------------------------------------------------------------------------------
The ROM Image that you are trying to upgrade is not compatible to your pocket pc.
Here are there differences:
Your device information:
ModelW10A:007
ROM Version: 3.16
Language: English
Your upgraded image information
ModelW10A:001
ROM Version: 3.15
Language: English
Please download the compatible utility and try again
-----------------------------------------------------------------------------
So where is the problem?
Thanks
nanis

It has been answered a few times, look through fora. it's a general pocket pc language change question, but applies to this one too. You need to rewrite the ROM header to match your device. Can be sort of tricky if you don't know what you're doing.

Did you install it
I have the same qtek with 3.16 and 3.19 shall I do it or wait to uk version?

If you don't mind O2 startup screen & O2 autoconfig...

supplier or distributor
nanis said:
I tried to upgrade and got the following error:
----------------------------------------------------------------------------------
The ROM Image that you are trying to upgrade is not compatible to your pocket pc.
Here are there differences:
Your device information:
ModelW10A:007
ROM Version: 3.16
Language: English
Your upgraded image information
ModelW10A:001
ROM Version: 3.15
Language: English
Please download the compatible utility and try again
-----------------------------------------------------------------------------
So where is the problem?
Thanks
nanis
Click to expand...
Click to collapse
Hi,
My advise to you is to try to get the latest rom upgrade from
either your supplier or distributors.
Also be very wary and careful when you got advice from this
forum on where or which website to download etc especially the
one which you do not have any informations if it suit your device
or not. If it is not suitable then after downloading it to your device
it will freeze up and you have to get it replaced. These people who
give advise take for granted everyone who view this forum are
professional like them. They never realise there are lots of new
users of the device that are trying to find out more informations.
Sometimes no warning was given to you when they just give you
the website to download etc.. I am one of those new user and also
I believe one of the victims too. I do support their intetests in this
forum but not the way some of the advise are given. Hope they
got the message. So good luck to you and happy upgrading.

Why on earth would you want to go from 3.16/3.19 to 3.15/4.16? Makes no sense to me...

bamse: because it's better

I'am used xda radio upgrade 4.16.00 with qtek
it is fine

Qtek s200 french rom ----> Qtek s200 rom WWE ?!?

Hello,
I have just recieved my new qtek s200 with this french rom:
ROM version: 2.9.7.33 FRE
ROM date: 14/2/06
Radio version: 02.07.20
Protocol version: 413.1.03
ext ROM version: 2.9.7.116
Can i upgrade to this qtek WWE rom (RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship)
without unlocking CID first?
Will the new ROM improve the camera function?
thx!
piXie

I have exactly the same version and I am interrested too !
Can you explain me what is WWE and CID?
Thanks a lot !

hi Gazous,
WWE is just... World Wide English ;-) instead of french you will have English.
CID is the vendor lock so you can't install other vendors roms, only roms from qtek in my case.
anyway still waiting for an answer....lol...thats ok i got plenty of time ;-)
cheers
piXie

v2.9.7.116 FR available
Version V2.9.7.116 FR is available on www.smart-phones.be if your have a valid EMEI.
I've tried to install it but after 1%, my pc automatically shutdown.
After that, my QTEK didn't work.
Return to After-Sales services
Another person tried to update and same result...
Daniel

Use NoVendorID reflashing utility and have a ROM of your choice... Search the forum for details...

thx myplate ;-)
my question is still unanswered tho...
Can I install a qtek WWE rom instead of a qtek french rom (my current rom) without unlocking CID or worring that my s200 will die on me?
After all, both roms come from qtek but since one is french version and the other is world wide english version...i'm afraid it will not be compatible...(plz dont tell me i'm a paranoid) lol
Thx again
piXie

omg walker! just saw your post....was it meant for me??
novendorid....is needed only if a different vendor rom is used right??
thx
piXie

ok Walker, lets see if i understood correctly:
1. I have a s200 with a french rom, and i want to change to WWE rom.
2. I downloaded the NoVendorID rom version for the dopod, and extracted it.
3. Should i just run the ROmUpdateUtility and it will install the dopod rom?
4. If yes, what about CID unlocking?? will I be able to install other rom versions later on?
appriciate your help
cheers
piXie

Don't hesitate to read the forum. All the answers are here...
Be sure, all the Prophets are sure identical in hardware. The only difference is the vendor ID and counry ID in the flash. You will newer damage your device, even running ROM for other vendor. My Qtek S200 now has Dopod 2.15 ROM. No problem! You can use WWE or FRA or RUS or CHT ROM and it will work. However, ROM utility won't reflash if it see the vendor is digfferent. One of the good gays has a bit fixed it to make it less strict.
If you afraid of wolves - never go to the forest. If you afraid of consequences - just do nothing forever. If you want to got WWE - just reflash with WWE ROM. Or go to the service and ask the guys to do it for you.
Try first the WWE ROM itself, if it fails with VendorID error - it's possible, run the same with NoVendorID utility. The only one thing to care about - the right ROM. If you try a ROM for 9100 - you will have a problem, but still recoverable, AFAIK. If you do something really stupid, your device becomes a pretty good black toy for kids, just like a real, but don't works ))))
Have a good luck!

lol Walker...you'r always two steps a head of me...

Hi Walker !
your story about the bad wolfes convinced me to go ahead and install ;-)
anyway, it works fine.
thanks a lot
take care
piXie

Enjoy! And have a good luck!

Changing Language from Italian to English

Hi,
I'm a newbie at HTC devices (and Pocket PC devices for that matter). I just bought myself a HTC P4350 (Herald)... which I really really like BTW... I bought it in Italy and it comes with the Italian OS. Since I'm an english speaker I'd really like to have an English OS. I cannot find a way to switch this so I get the impression that this is part of the ROM. Can anyone confirm this?
According to HTC support once it is set on the device it cannot be changed but from what I've been able to read on this site I should be able to just load up a new ROM and be able to go with this. Is this correct?
I currently have the following version:
ROM: 1.8.408.2 ITA
Date: 11/03/06
Radio: 02.71.90
Protocol: 4.1.13.31
ExtROM: 1.8.408.101
Now the ROMs I've found on this site seem to be a little bit 'older'. i.e. 1.8.405 .1 instead of 1.8.408.2 for instance. Should I worry about this?
I would like to have exactly the same functionality and software I have now but just in English.
Any help would be appreciated.
Thanks.

...
...

i need some help, just sold out my wizard and im going to buy a herald. the one i'm buying as the windows in spanish, but i want to put it in wwe.
The phone is sim, inlocked but it could be cid locked, there for i may no be able to flash it with the new rom.
it seems there is no unlocker for herald but can i flash it easy?
thanks in advance

how to switch from Dutch to English
Dear Mr Moderator
I've bought my device HTC P4350 with configure as follows :
Rom 1.8.404.1.nld
Rom datum 11/3/06
model : hera100
Radio: 02.71.90
Language : Dutch
I tried to upgrate my device with Mr POF's software. Unfortunately, it did not work properly. Everytime trying to update there's stopping in the 2% process with messages :
ERROR [294] : INVALID VENDER ID
Im very disappointed with my device bcoz its mobile window OS is in Dutch. Hence, i really dont know how to use it effectively. That's reason I am seeking for a upgrade ROM image. Please help me !!!!!!!!!!!
It would be very greatful if you help me to switch Dutch language into English for my HTC P4350 . I will be very happy to pay you by return. I'm looking forward to hearing from you soon.
Thanks with my best regards
Phung Thanh
email : [email protected]
skype:thanhthephung
telephone : +84903422415

from italian to english, I need help
dear all,
I have jamin (G3) in italian, need to change it to English. please help. what is the simplest way?
thx

from italian to english, I need help
dear all,
I have jamin (G3) in italian, need to change it to English. please help. what is the simplest way?
thx

rosso said:
Hi,
I'm a newbie at HTC devices (and Pocket PC devices for that matter). I just bought myself a HTC P4350 (Herald)... which I really really like BTW... I bought it in Italy and it comes with the Italian OS. Since I'm an english speaker I'd really like to have an English OS. I cannot find a way to switch this so I get the impression that this is part of the ROM. Can anyone confirm this?
According to HTC support once it is set on the device it cannot be changed but from what I've been able to read on this site I should be able to just load up a new ROM and be able to go with this. Is this correct?
I currently have the following version:
ROM: 1.8.408.2 ITA
Date: 11/03/06
Radio: 02.71.90
Protocol: 4.1.13.31
ExtROM: 1.8.408.101
Now the ROMs I've found on this site seem to be a little bit 'older'. i.e. 1.8.405 .1 instead of 1.8.408.2 for instance. Should I worry about this?
I would like to have exactly the same functionality and software I have now but just in English.
Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
Men, look for this program at www.mylanguage.mobi
I see there are program for switching between German, Dutch and English. You may try to ask for Italian also. This guy is really helpful

rosso said:
Hi,
I'm a newbie at HTC devices (and Pocket PC devices for that matter). I just bought myself a HTC P4350 (Herald)... which I really really like BTW... I bought it in Italy and it comes with the Italian OS. Since I'm an english speaker I'd really like to have an English OS. I cannot find a way to switch this so I get the impression that this is part of the ROM. Can anyone confirm this?
According to HTC support once it is set on the device it cannot be changed but from what I've been able to read on this site I should be able to just load up a new ROM and be able to go with this. Is this correct?
I currently have the following version:
ROM: 1.8.408.2 ITA
Date: 11/03/06
Radio: 02.71.90
Protocol: 4.1.13.31
ExtROM: 1.8.408.101
Now the ROMs I've found on this site seem to be a little bit 'older'. i.e. 1.8.405 .1 instead of 1.8.408.2 for instance. Should I worry about this?
I would like to have exactly the same functionality and software I have now but just in English.
Any help would be appreciated.
Thanks.
Click to expand...
Click to collapse
Currently I am looking for the ROM in any Language Version to save my Phone, can you sent me the website that you download the rom from? thank you for your help

[REQ] HP iPAQ 6915 english rom needed

please, can someone give me english rom for hp ipaq 6915? my device has next settings:
system operativ 5.1.195 built 14957.2.3.1
livello di revisione del prodotto 1.0
rom 06/22/06
rom 1.25.00. ITA
versione rom estesa N/A
Windows CE 5.1
bootloader: G.39
Versione XIP: 1.0.0.0
and if you'll give me the rom, please please give me the instructions too how to install it...thank you very much

HP hw6915 english rom needed
Please, can someone give me english rom for hp ipaq 6915 too?
My device has next settings:
rom 06/21/06
rom 1.24.00. FRA
Windows CE 5.1
bootloader: G.39
Versione XIP: 1.0.0.0
And if you'll give me the rom, please please give me the instructions too how to install it...
Thank you very much
[email protected]

ive got :
Product revision level : 1.0
ROM date : 06/12/06
ROM version : 1.21UK.00 ENG
Extended ROM version : N/A
OS version : Windows CE 5.1
Bootloader Version : G.39
XIP Version : 1.0.0.0
If anyone wants to explain how to get it off my device, then please let me know and ill give it a shot.

English ROM for hw6915
00SparX00 said:
Product revision level : 1.0
ROM date : 06/12/06
ROM version : 1.21UK.00 ENG
Extended ROM version : N/A
OS version : Windows CE 5.1
Bootloader Version : G.39
XIP Version : 1.0.0.0
If anyone wants to explain how to get it off my device, then please let me know and ill give it a shot.
Click to expand...
Click to collapse
Setup
- rename 'grab_it_xx.exe' to 'autorun.exe'
- create folder '2577' on your (empty) SD/MMC/Mini-SD card
- copy 'autorun.exe' to this folder
That's it for the "setup" )
Usage
Now every time, when you insert this card into PPC it will grab the ROM image and save it into root of the card as 'dump.bin'.
It will show you a tiny red progress bar at the very bottom of the screen.
Once done, it will beep the default sound.
Message boxes are only shown in case of error.
IMPORTANT NOTE (thanx MDAIIIuser)
YOU MUST NOT put it back into another device!!!
YOU MUST LOCK THE SD CARD FIRST!!!!!
or read the SD with card reader on your desktop PC.
Otherwise, you will rewrite the dump with your own ROM!!!!
This ROM dump file can be then further processed and converted to flashable formats.
Tool is here:http://forum.xda-developers.com/attachment.php?attachmentid=23564&d=1119937614
Then send or publish dump.bin file to all needes
-varix-
[email protected]

I just ripped the image from my 6955 and will upload it later tonight. Just wondering if it is possible to make a WM6 rom after disecting this and applying the useful bits to one of the WM6 updates for one of the HTC devices. Anyone have any information on this?

Hp Ipqt 6915 english rom needed
Does anybody can publish English ROM for iPaq hw6915? Info about grab is located above. May be somebody has link to this image on the ftp server?
-varix-
[email protected]

I tried but when I remove the memory card (after waiting about an hour) I get an error saying "Cannot create file". The file is a 128 MB file before I remove the card, but when I remove it...it becomes a 52 KB file which is corrupted.

Did You read card in the card reader? This method starts work any time when You put SD into iPaq.
-varix-

doesnt work
i tried grab_it_128_150.exe on a mini -sd but i got a non good dump.bin,
tried also grab_it_128_minisd_468.exe but that doesn't work at all,
a simple d2s command results in a screen thats stuck in cal cheksum,
any advise????

I used grab_it_128_150 on the 1Gb miniCD w/o any problems. No one grab_it_xxx except this does not work on the my hw6915.

I have uploaded dump.bon from english hw6519 here :
http://maloos.free.fr/dump.bin
Hoping it'll help..
I need french language by the way
varix said:
I used grab_it_128_150 on the 1Gb miniCD w/o any problems. No one grab_it_xxx except this does not work on the my hw6915.
Click to expand...
Click to collapse

rom dump
you rom real? after winrar 161 KB? work?

So what to do with this dump now ?

how to flash the English rom onto IPAQ hw6915
How do I flash the downloaded English rom onto my IPAQ hw6915?
Answers are greatly appreciated!

so, does someone has a little tutorial how to flash on hw6915, and an english rom? please

The obstacle is that HP so far has not released any rom update for the HW69xx, thus we do not have a valid rom to test. I suppose it can be done by the same method to flash a HW65xx, but it is quite risky to flash a dumped bin file, plus if anying goes wrong, we know little to do. I used to have a Tytn and the Tytn upgrading group has contributed so much that almost makes rom upgrading a piece of cake. So maybe it is because the 6900 user base is too small thus we do not have some talent programmer like POF,etc. , who may have opted for htc native devices.
Suggestion: either wait for HP to release some rom update for us to do some experience(sooner or later), OR SET UP A FUND TO BUY A 6900 FOR SOME SMART PROGRAMMER and setup a REWARD if one get it done. I think 6900 hardware wise is a really nice machine, but HP sucks on the software side. Too much room to be improved. Let alone WM6, where is AKU3???

The link is dead, can someone please send me or add a link for a hw6915 english rom as i bought one from ebay and its french , i am hopeing to change it to english
please help
mrking

I'm in need of the 6900 rom as well so please post a link to it.

I have attached a copy of an Ipaq HW6915 English ROM. I hope this helps.

http://rapidshare.com/files/46350136/Ipaq_HW69XX_ENG_ROM.rar.html

[Q] iPAQ hw6910 broke while Flashing

I tried to flash my iPAQ 6910 with the official rom update from HP Hompage
But it failed
Now the iPAQ 6910 shows:
USB
HP (logo)
vG. 39
When it's turned on.
Has anyone a idea how this problem can be fixed?

Hangart said:
I tried to flash my iPAQ 6910 with the official rom update from HP Hompage
But it failed
Now the iPAQ 6910 shows:
USB
HP (logo)
vG. 39
When it's turned on.
Has anyone a idea how this problem can be fixed?
Click to expand...
Click to collapse
yeah..add me on yahoo messenger (cata_cata_cs) or skype (cata_i0an) best if you add me to skype and speak english a little.

i have the same symptoms on my 6910, wont get past the loader screen with 1.00.00 and 1.13uk in red in bottom left. where do i find instructions on the process of flashing the rom and what is the best\most stable rom to use (english)?

kernowmike said:
i have the same symptoms on my 6910, wont get past the loader screen with 1.00.00 and 1.13uk in red in bottom left. where do i find instructions on the process of flashing the rom and what is the best\most stable rom to use (english)?
Click to expand...
Click to collapse
i have a 6910 which i bricked some time ago and really need advice and software to reflash. looked at link above and it is in german but ruu says wrong version i have 6910 with wwe as language.
help....

Try google for UNI_ExitBootloader.exe maybe it will help if you are actually just stuck in bootloader.

try to update again
I was stuck in that too, then I used my cradle/usb connected with the charge of the phone and installed again de ROM, it solved.