Is it possible to return to original hermes bootloader so that i can have my waranty again???
i now have IPL-1.01 and SPL-1.40.olipro
my device is a hermes200
any thoughts are accepted and welcomed
and why i am asking so??
because after a few upgrades sometimes my devices says "No Gsm" and some other loads fine radio rom and protocol
sometimes shows that it has full signal radio but actually it hasn't got any
plz help me.someone told me that is actually a hardware prob with the gsm antenna
what to do???
hi,
im new at this and i recently bought a TMOBILE MDA unlocked about 3 weeksago. It was working fine until last night wen I turned off my phone and turned it back on.Now it is telling me that it cant find a network and everytime i hit PHONE select network it says it finds "cingular" tap ok. After I do that, nothing happens. I can still go on the internet and everything but I just cant use my phone.
IPL 2.26
SPL 2.25
GSM 02.25.11
OS 2.26.10.2
any help is appreciated thanks.
i posted this in another thread but no one replied so thought this one mite be more busy.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
please help, at least let me know if Ive got a chance of repairing it
i believe if you can get it in to bootloader mode you can flash back to original rom and start over
i thought that to but when i tryed the t-mobile rom it said "connection error" and also said it should be connected through active sync. but then agen it mite of been the wrong t-mobile rom but im sure it was for the vario ii. do you have a link to the one i should try please?
i downloaded the official UK shiping rom from t-mobile site and upgrading now through bootloader. will report on what happens.....
nope, keep getting "device not responding" or "connection error". any other sugestions?
i looked on here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick and it says that i have to "Flash any type2 radio in NBF format. If that doesn’t work, flash the radio using HERMflasher" please could someone tell me how to do this, if this is the solution to my problem or if there is another way around this. thanks.
please help someone i realy need to fix my phone
Cool down....
what's ur radio version?
Also have u read this? http://wiki.xda-developers.com/index.php?pagename=Hermes_SimUnlock - TRY THIS FIRST, before attempting anything else...
ok, i have tryed that "sim and cid unlocker" and i beleve that you have to connect with active-sync because when i tryed it when i was in boot loader it said that it was not connected but it was. i will get my radio version now.
EDIT: my radio version is: 0107
EDIT2: also, here are some other numbers (which i dont know what they mean but mite be needed) which apear on boot-up t-mobile splash screen, in red letters/numers, just before "no-gsm" flashes on:
M 05
S 04
B 06
D 1.21
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
berdinkerdickle said:
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
Click to expand...
Click to collapse
ok, ill try that, does it need to be a perticular radio because im not super CID? for some reason the link will not work.
oooooo, it seems to be workin!!!!!!!!! im at...16%. ill report what happens after update finished
yes!!! it worked!! thank you very very much for your help!!!
hey ppl, my friend had bought a universal but its radio seems weired.
it keeps searching for a signal.. but dosent get anything..
a test i did :
i kept my uni under a computer CRT monitor and it disturbed the CRT monitor ..even whlie searching for a signal..(as GSM signal usually does)
His uni dosen't even disturb the computer monitor.what is it ? faulty radio or ROM ?..I've flashed numerous radio ROMS..1.09 1.15 ...ran the unlocker twice...both with successs.. ran the simunlock tool on the 1.15 with success...but no effect..
its still searching... the sim works on my phone so its not faulty..
any ideas ?
its an orange SPV m5000
I flashed it with
with 2.50.00 WWE WM5 ROM (from xda-developers a while back..i don't know whos was it(maybe helmi)
BootLoader 1.01
Radio 1.15.00
edit :
using mtty i just did the task 55aa thingy and it formatted the system
then i did the rtask 0 thingy to reset the radio..
then flashed it with thingonaspring wm6 rom with 1.15.00 radio ..successfully i may add.
still searching ... searching...and on manual network mode it's just stuck on the dialogue which says 'getting network settings' or something..
i'm beginning to think hardware of radio is damaged ..any ideas..please help ..
hy. i'm a newbie so plz escuze my mistakes and most of all my english.
i have a mda vario or htc wizard 200 as i know.
on the start screen,it shows
IPL 1.06
SPL 1.06
GSM 01.12.10
OS 1.6.2.1
it's a G3 wizard. My problem is that it has the T-Mobile original german ROM and i want it in english. i have read most of the forums here and tried many ideas i found here but nothing helped me so far... i tried cid unlock with lokiwiz,it shows me that is unlocked but when i try to flahh it with the .exe flasher,downloaded Rom-s for it from here,it's not working. I have Win7 now and i tried with Windows mobile device center sync software for win7 and nothing,i tried in Win xp with activesync and nothing,the same simpthomes. It syncs,detects my ppc,i start the RUU,detects the Rom i have,but when i get to the flash window,just after it tells me that the flash process will take about 10 minutes,my ppc disconnects,enters in the bootloader mode,connection is lost and RUU ends with an error window that tells me that the memory could not be read.
My ppc is not sim locked,i can use whatever sim i want with it.
please help me,i am desperate newbie. thanks.
soriyn said:
hy. i'm a newbie so plz escuze my mistakes and most of all my english.
i have a mda vario or htc wizard 200 as i know.
on the start screen,it shows
IPL 1.06
SPL 1.06
GSM 01.12.10
OS 1.6.2.1
it's a G3 wizard. My problem is that it has the T-Mobile original german ROM and i want it in english. i have read most of the forums here and tried many ideas i found here but nothing helped me so far... i tried cid unlock with lokiwiz,it shows me that is unlocked but when i try to flahh it with the .exe flasher,downloaded Rom-s for it from here,it's not working. I have Win7 now and i tried with Windows mobile device center sync software for win7 and nothing,i tried in Win xp with activesync and nothing,the same simpthomes. It syncs,detects my ppc,i start the RUU,detects the Rom i have,but when i get to the flash window,just after it tells me that the flash process will take about 10 minutes,my ppc disconnects,enters in the bootloader mode,connection is lost and RUU ends with an error window that tells me that the memory could not be read.
My ppc is not sim locked,i can use whatever sim i want with it.
please help me,i am desperate newbie. thanks.
Click to expand...
Click to collapse
turn off the device and disconnect the battery as well sim card........ leave without sim card and plug it back battery then take away your device into bootloader mode to reflash again​