have upgraded my Wallaby radio stack from original to 6.25 using .EXE file. My device restarted , but nothing happen just the boot screen. is there anything I can do ??
There are only G and U letter un right corner.
I can go to the boot loader (GSM error --> failed to start)
What can i do to go to today screen and reflash an other radio stack (like 4.21) ?
Qtek 1010 - 64M - ROM 3.04 ENG (WM2003SE) -
RAdio Stack depends on the Model. Check your rear sticker. It it´s a PW10Bx-model it uses 900/1900 MHz and require a 6.xx Radio stack.
If it is a PW10Ax then you have to use a 4.xx Radio stack.
Try this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
thks
but i can't access to the device (install the good radio stack).
the splash screen freeze (with G an du lettre in place of the version of the radio stack).
Many hard reset, many test ...
if i can go to the today screen i can flash the good radio stack.
Have you tried installing the Special Edition ROM?
Still getting no Today Screen ?
Stefan
i cant get to today screen
All is working fine now.
1 : remove the sim card from the device
2 : go to the boot loader and test the phone (failed for all)
3 : hard reset
4 : wait 20 minutes
5 : you've got the to day screen and you can reflash the RSU (do not put the .exe file in the windows/startup)
and that all for me
I can't get to today screen....
irsan_donald said:
I can't get to today screen....
Click to expand...
Click to collapse
I have the same problem with my wallaby.. It shows splash but wont continue for a long time (more than 30minutes) I try to dowgrade ROM back to original Tmobile ROM wiwt 2002windows but still wont display today screen..
so i try to uprgrade to win 2003se and after 18 minutes today screen shows up.. I am lucky man now.. my wallaby its working again THANX GOD and U BOYS I LOVE U ALL !!!!
http://forum.xda-developers.com/viewtopic.php?p=138920#138920
ive just done it
HOPE THIS HELPS YOU.
Hi...
I upgraded my qtek 9100 from OS version 1.6.7.1 to cingular 1.8.11.1
The problem is that now, the phone doesn't start... the splashscreen appeears, along with... IPL 2.17
SPL 2.21
GSM 02.07.10
OS 1.8.11.1
But doesn't get out from there...
Did a do anything wrong?
PLEASE help me?
Is there any solution or is it bye bye qtek?
maybe you flashed broken or wrong rom.
start your device in bootloader mode (look in wiki how to do this) and then reflash again and if this does not work, get rom from your provider and reflash with this.
...
But my pda starts and it stays in splashscreen... is it repareble anyway?
Yes it should be fixable
Cant understand why you would want a old cingular rom (the cingular is not exactly same hardware as your phone wiza200 vc wiza100!)
You should download an aku2 rom here ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
user name xda password xda
Next get into the bootloader screen - turn device off and start with camera button pressed - should be a multicolor screen
Next attach device to pc via usb cable
Flash with above rom and all should be well
Hello Buds,
I've upgrade my p 3300 a few weeks ago with Artemis_touch_1.0_WWE_rapid
IPL 1.14.0001
SPL 1.14.000
GSM 02.67.90
OS 3.7.0.0
After some days a freeze and soft reset, I made a hard reset, and re-use the upgrade soft ware.
Now its completly block on the boot page with HTC.
I use RUU(in( Artemis_touch_1.0_WWE_rapid) in the Bootloader but it run but after 3% : error 270
If a use a newer RUU ( Release_Aje_fr_1.90Full_YuanYuan) : error 260
please help me I completly lost !
Trux 13
HTC P3300IPL 1.14.0001
SPL 1.14.000
GSM 02.67.90
OS 3.7.0.0
I had almost the same problem. I intented to change my ROM with an WM6 but it faild and the PDA is some kind dead it freezes in the boot screen. is there some tool to change the rom to an original HTC rom or thre is no help. I hope somebady can help me. the version of the ROM that apears on the screen is:
IPL 1.12.0001
SPL 1.12.0000
GSM 02.67.90
OS 4.0.0.0
I've tried to :
Hello...
In bootloader run USPL
It run, to 0% >> to 100% but right after : error 270
Still block...
Trux 13
hmm i don`t know how i can get the device to boot loader mode can u tell me how
Bootloader
Go in ths Thread :
http://forum.xda-developers.com/showthread.php?t=306880
Trux13
hi i solved my problem i used one spanish version of the WM6 for P3300 and it works if u want hire is the link http://www.megaupload.com/es/?d=YZOQEF4H
u can install it and then change to one on english its what i will do today and i saw how to enter in 3 color bootloader mode ON/OFF boton + VOCAL + RESTART then holding the ON/OFF + VOCAL
Stillnot working
I tried your *.exe file but not working
Trux
me too . always the error
ipl 1,14,0001
spl 1,14,0000
g 02 67 90
os 1,14,00
i ll be crzy! jesus! someone help me!
how to run the uspl on this tm phone ?
Has anybody solved the problem? I have exactly same errors and can't do anything
Try This:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
i tried this already. Invalid certificate any other ideas ?
woojtekr said:
i tried this already. Invalid certificate any other ideas ?
Click to expand...
Click to collapse
Hi
if you need still help GG9735272
the only solution !!!!
woojtekr said:
Has anybody solved the problem? I have exactly same errors and can't do anything
Click to expand...
Click to collapse
to everybody who is stuck at HTC screen. The only,and i mean the ONLY way to fix this is to find the original rom for your provider !!! belive me,i`ve tried every possible other way.
SD Card Flashing wont work coz your devices are probably CID Locked,so it goes only to 3% flashing and restarts.Finally I found original o2 ROM (German) and it worked like a charm Even the original o2 (English) ROM did NOT work,it had to be the German one,coz probably the device came with German ROM originally !!!.
So my suggestion is,stop trying to flash it with different ROM`s and spend some time finding original ROM from your provider and it has to be the same language as your provider. even if it`s WM6 and your device was originally was WM5,as long as its from your provider and same language it should flash with no problem.I spent 2 weeks to find this out ))
Good Luck to everybody ))
savich said:
to everybody who is stuck at HTC screen. The only,and i mean the ONLY way to fix this is to find the original rom for your provider !!! belive me,i`ve tried every possible other way.
SD Card Flashing wont work coz your devices are probably CID Locked,so it goes only to 3% flashing and restarts.Finally I found original o2 ROM (German) and it worked like a charm Even the original o2 (English) ROM did NOT work,it had to be the German one,coz probably the device came with German ROM originally !!!.
So my suggestion is,stop trying to flash it with different ROM`s and spend some time finding original ROM from your provider and it has to be the same language as your provider. even if it`s WM6 and your device was originally was WM5,as long as its from your provider and same language it should flash with no problem.I spent 2 weeks to find this out ))
Good Luck to everybody ))
Click to expand...
Click to collapse
I have the same problem and I've come to believe that this is the only solution. Just one thing: I didn't back up ROM before I tried to flash (talk about a noob mistake).
So, I ask, I plead, I beg... can anyone tell me where to get an original Orange France ROM for the Artemis (SPV M650)?
To my knowlegde you cant backup the rom from your device. whenever you change your rom, use the USPL tool. It is a golden rule until something better is made.
Here are some tips:
First make sure you have a original factory rom from your provider/brand/etc.
Check with a soft reset if code: SPL 1.11000 appears on the the boot screen. (then it is CID unlocked) Any other number and it is locked so you have to USPL first before you change to any custom rom.
If you flash a factory rom then the SPL resets to a non SPL 1.1100 number again. Use USPL to CID unlock again.
Also avoid Vista (especially 64bit) to use the USPL tool. Do it on a windows XP machine. Also there reports of glitches in the usb connection and active sync when doing upgrades or USPL. So keep you system as clean as possible. Dont use a USB hub and disconnect any other usb devices just to make sure.
Also remove your SD / SDHC card before doing a upgrade.
Sometimes the new rom misses some stuff when flashing. When this happens just flash the rom again. But first make sure if its still CID unlocked by soft reseting and check if SPL 1.1100 else use USPL first.
Even if you did all that, there still can be things that can go wrong. So if you absolutely confident to do a custom rom then do it. Otherwise use original upgrades from your provider
brim
help i breaked my htc p3300
jai lereur 270 jai essaiyer tous les rom rien ne marche ::
p3300 work again
p3300 movistar work again
i have problem, when i put my polaris into my pocket or in a bag, the signal bar turns to ! icon ("No Status").
is it hardware thing or radio?
i had flash it into 3 different rom and dowbgrade radio but, still i got this experience....
i used rom ori WM6.1
RUU_Polaris_HKCSL_WWE_3.19.831.3_radio_sign_25.85.30.07_1.59.42.15_Ship
Radio
Polaris_Radio_ROM_1.59.46.12
could anyone help me?
Just when you put it in your pocket? (are you sure your pocket isn"t built with aluminium )
have you any signal when the device is up ?
Have you try upgrade radio instead cause 6.1 and 6.5 need newer radio try 1.65.30.09
Do you always have the problem if you turn your phone into "gsm only" mode ?
When did you discover this problem? After a flash or something?
Kiiv said:
Do you always have the problem if you turn your phone into "gsm only" mode ?
When did you discover this problem? After a flash or something?
Click to expand...
Click to collapse
for a week from now.... try to up and downgarde but still same problem.... try gsm mode or turn off HSDPA..... i have no idea... but today got worst, suddenly no simcard detected... reset it, replace simcard... it turn up many time.
Ha ve you tried your simcard in another phone , maybe she is dead
hi!
i have an SPV M650
it's running on Windows Mobile 6
IPL 1.04.0001
SPL 1.11.0000
GSM 02.67.90
OS 3.4.0.0
The phone 'freezes' very often. sometimes it doesn't even starts after i try to reboot it.
I tryed: - the 'hard reset'
- to upgrade my ROM
- and when i tryed start_uspl when it reached 70% the phone restarted
I don't know what else to do
If anybody can help me resoft it, or to change it's firmware, or if anybody knows what can the problem be, i would appreciate it very much